billet shear used for sale

Qty. 1 Second-hand cast house for billet production incl. filtration system Mfc.: Gautschi, Mechatherm, Weishaupt, PEHAKA, FISONS, Dantherm Filtration GmbH Built: Unknown The machine is very strong design and still running well because it has been maintained always with original spare parts and qualified experts. Direct casting on a vertical table and make billets of 6'' and 8''. To make 9'' the tool of the table can be modified. The vertical caster can work with 9'' by remachining and modifying the tool table. 1 Melting and Tilting furnace GAUTSCHI, Capacity 20 T, Fuel Oil Burners The furnace has an elevator charging machine to load the scrap from the top of the furnace Degassing unit FILD from MECHATHERM England Nitrogen treatment and filtering 1 Vertical caster for billets 26 x 6’’ and 20 x 8’’ for useful log length 6 m 1 Homogenizing furnace, Fuel Oil Burners Weish ...

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Manufacturer: METSO LINDEMANN Type of Machine : Press Shear Year of Manufacture: 2010 Technical Condition: Good After major renovation in 2023 Meter reading: 18,500 Mt/h Technical Data - Power Supply: Electric 3 x 90KV - Cutting Force: 630 tons - Scrap Compression Force: 630 tons - Number of Pumps: 3 pcs - Capacity: Approx. 8-22 tons/h - Loading Scrap: Left or Right Side - Loading Box: 12m³ - Total Weight (Machine + Container): 75 tons - Control: Remote Control - Hydraulic Oil Capacity: 6,500 liters Find more here - / Contact us at -

Manufacturer: Bonfiglioli Type of Machine : Scrap shear This machine has sustained fire damage. The main structure and the cutting unit remain intact, including the knife, cutting cylinder, and quick-opening function. Find more here - / Contact us at -

Offer 26031 Technical data: - Cutting length 3080 mm - Cutting thickness 13 mm - Cutting angle controlled 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min - Mot. Controlled backgauge up to 750 mm - Front angle stop + support arms 1000 mm - Control CYBELEC DNC 10 when entering the sheet thickness in mm - Autom. Cutting angle adjustment according to sheet thickness - Cutting length limitation - Autom. Positioning of the backgauge - Rear space protection with light barrier - Drive 400 V / 18.5 kW - Footswitch - Space requirement approx. W 3850 x H 1750 x D 1800 mm - Weight approx. 10500 kg

SCHNELL SHEAR LINE 300 rebar cutting and bending line was built in 2008 in Italy by Schnell S.p.a. The electrical installation was overhauled in 2024. The SCHNELL SHEAR LINE 300 is a reliable system designed for serial machining of rebar with a maximum diameter of 50 mm. It integrates all the necessary equipment that is responsible for cutting, bending, optimising, storing and handling bars. The entire production cycle, from feeding to the collection of the finished parts, is performed fully automatically. The SCHNELL SL 300 stirrup production machine is fully complete and consists of the following components: – control console – FA/6/14 storage rack for steel – SCHNELL CGS 300 HDY guillotine shears – SCHNELL VBM 12/2 measuring and cutting track with single-sided unloading – SCHNELL ROBOMASTER 45 automatic rebar bending machine – rebar storage and retrieval system ...

NNP High shear mixer Stainless high shear mixer, sits over a vessel with hopper to add product, shaft length 600mm, diameter of high shear head 120mm, 3Ph

- invoersysteem voor vlak- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Platstaal gt; maximale lengte: 15 200 mm gt; maximale breedte: 50-500 mm gt; maximale dikte: 5-25 mm Hoekstaal gt; maximale lengte: 15 200 mm gt; maximale breedte/hoogte: 50 x 50 - 200 x 200 mm gt; maximale dikte: 16 mm gt; maximaal gewicht: 750 kg Hydraulisch ponsen VPO 1000 gt; cap: 100 ton gt; perforatiediameter/dikte: 57/15 mm of 32/25 mm gt; 4 ponsunits voor vlak staal gt; 1 ponseenheid voor hoekstaal gt; incl. gereedschap Hydraulische schaar voor vlak staal VPS 2200 gt; cap: 220 ton gt; breedte/dikte: 500/25 mm gt; hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 gt; cap: 240 ton gt; 200 x 200 mm / 16 mm Hydraulische coderingseenheid VNI 1/36 gt; 1 codeerschijf gt; 36 tekens gt; tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 gt; 37 kW - 250 bar

Jordan MK1 High shear mixing plant Stainless, 100L high shear mixing plant, mayo plant, variable speed high shear mixer, 4Kw, steam jacketed vessel, with Johnson lobe pump outfeed, variable speed pump, mobile, 3Ph

General SKU275T623 LocationBarneveld MakeK-Tron Coperion TypeK2-MV-T35 No.1400518/M-356290 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter804 mm Specified Features - Metering screw MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Metering screws Screw diameter35 mm Pitch12,5 mm Screw length240 mm With hoppercheck Capacity77 Ltr. Hopper sizesdia. 804x339,93 mm Inletdia. 804 mm Outletdia. 220 mm With motor0,55 kW 400 Volt Screw speedmax. 82 rpm With breaking/mixing shaftcheck Motor0,55 kW 400 Volt Information Year of construction2014 With switchgear(as is) Floorspace1,2x1,2 m CEcheck Total height2,6 m Weight500 kg Extra Specificationswith: twin screw feeder: coperion k-tron K-ML-KT20, 2014, (CE), with hopper: 7 Ltr., inlet: dia. 114,3 mm, outlet: 60,3 mm: with :weight scale: coperion k-tron K-SFS-24: Typ24/12, 2014, (CE) tw ...

General SKU330W712 LocationBarneveld MakeCollette Gral Type300 Ex Pro High shear MR103 Mach.No.99.M12.01 Pressure Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor18 KW Specified Features - Universal mixer Universal mixercheck Capacity300 l. Vessel sizesDia. 840x600 mm With covercheck InletDia. 150 mm Pneumatic operated outletcheck OutletDia. 200 mm With jacketcheck With motor18/12 kW, 380 volt, 1465/975 rpm With lump breakercheck With motor7,5 kW, 380 volt, 2930/1460 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4435 (316L) Information Year of construction2000 Mounted on framecheck With switchgearcheck Floorspace1,20x2,50 m Total height2,55 m Extra SpecificationsHydraulic unit, 15 kW, 380-415 volt, 1420 rpm, 2-doors control cabinet Universal mixersColletteMixers > Universal mixersB ...

General SKU302X438 LocationBarneveld MakeFluid Pumpen und Mischtechnik TypeMSO No.15061 Year of construction1986 Main Features MaterialStainless steel Motor0.37 KW Length105 mm Specified Features - Stirrer Stirrercheck Homogenising stirrercheck Shaft length105 mm Sizes stirring headDia 25x15mm Number of stirrers on shaft1 Motor0,37 kW, 220 volt, 2765 rpm With frequency controllercheck Speed mixing shaftMax 12000 rpm Mounted on supportcheck MaterialStainless steel 1.4829 Information Mounted on framecheck With switchgearcheck Total height0,80 m Weight50 kg Floorspace0,30x0,40 m Extra SpecificationsPLV / Eldutronik controlStirrersFluid Pumpen und Mischtechnik GmbH EssenMixers > StirrersBrand > Fluid Pumpen und Mischtechnik GmbH Essen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to  ...

General SKU330W711 LocationBarneveld MakeCollette Gral Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor18 KW Specified Features - Universal mixer Universal mixercheck Capacity300 l., (260 l.) Vessel sizesDia. 840x600 mm With covercheck InletDia. 150 mm Pneumatic operated outletcheck OutletDia. 200 mm With jacketcheck With motor18/12 kW, 380 volt, 1465/975 rpm With lump breakercheck With motor7,5 kW, 380 volt, 2930/1460 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4435 (316L) Information Type300 Ex Pro high shear MR103 Mach.No.……. Year of construction1999 Mounted on framecheck Floorspace1,20x2,50 m Total height2,55 Extra SpecificationsHydraulic unit, 15 kW, 380-415 volt, 1420 rpm 2-doors control cabinet Universal mixersColletteMixers > Universal mixersBrand > Collette What you can expect fro ...

This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.

General SKU330W713 LocationBarneveld MakeDiosna Main Features MaterialStainless steel Volume600 Ltr. Motor38 KW Specified Features - Universal mixer Universal mixercheck Capacity600 L Vessel sizesdia. 1200x750mm With covercheck Inletdia. 125mm Pneumatic operated outletcheck Outletcheck With motor38 kW 400 volt (Ex) Rotor speed60/120 rpm With lump breakercheck With motor7.5 / 9 kW 380 volt Rotor speed1500/3000 rpm MaterialStainless steel 1.4552 Information TypeP-600 Mach.No.238-027 Year of construction1993 Mounted on framecheck With switchgearcheck (as is) Floorspace2x1 m Total height1.45 m Weight2650 kgUniversal mixersDiosnaMixers > Universal mixersBrand > Diosna What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...

cutting effort 1000t the number of strokes (no load) 17 /min course a support of the blades 140mm Max. cutting diameter of rounded workpiece, mm 190 Max. cutting diameter of squared workpiece, mm 180 for 450 N/mm2. Machine weight, kg 60000

Max shearing power: 500 ton Max speed: 40/1 min Stroke: 100 mm Single stroke: 25/1 min Square: 125 mm Max round: 132 mm Length of blades: 420 mm Main motor power: 45 kW Height above floor: 3500 mm Weight: 23 ton

Max shearing power: 315 ton Stroke: 70 mm Single stroke: 30/1 min Square: 100 mm Max billet cut : 106 mm Main motor power: 20 kW Weight: 14 ton

cutting effort 800t the number of strokes (no load) 20 /min single strokes 16 /min course a support of the blades 125mm Main drive motor 55 kw in 1475 rev / min cutting power Strength of the material Tensile N/mm2 450 500 600 700 800 900 N/mm2 square mm 160 150 132 118 106 100 round mm 170 160 140 125 112 106 strip steel 425x 67 60 53 47 42 38 320 x 80

course of the blade slide 100 mm number of moves at idle position 25 / min Main drive motor 30 kw in 1480 rev / min cutting power Strength of the material Tensile N/mm2 450 500 600 700 800N/mm2 square mm 125 118 105 95 85 round mm 132 125 112 100 90 flat 375x 60 45 40 35 32 Weight 23,000 kg (50,692 lb) Length x width x height 1850 mm × 2450 mm × 3750 mm

A Peddinghaus 214/200 billet shear is available. Cutting capacity: square: 70mm, round: 80mm, flat: 180mm x 35mm/250mm x 28mm, weight: approx. 5000kg.

Qty. 1 Second-hand billet foundry plant Mfc.: Cometal SA Built: 1989-2008 Stopped: 2014 Billet size: Dia. 145 – 152 – 178 – 203 – 228 – 254 mm Length: 7.0 m Tolerances: Dia. + 0, -2 mm Length: +/- 30 mm Deflection: 2 mm per 1000 mm

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

30T Heat Size EAF Meltshop with Billet Caster Year of Mfg. 2004-2014, installed but never been used. The Equipment was purchased over a 10-year period, starting in 2004. But recently management not get involved in steelmaking. The Buyer needs to invest in completing the Installation. A detailed plant assessment report (prepared by DANIELI) outlines the required works / investment to put it into operation. According to the report, the Steel Making Plant can reach more than 230.000 TPY billets production after adjustments to existing equipment and installation of a LF. The line consists of: • 30 Ton EAF (Electric Arc Furnace) 'CONCAST' Shell: Spout type; Diam. 4.0 M; Shell height 1.3 Int. Panels diam. 3.8 M; Hot heat 5 Ton; Bucket volume 23.0 M³; El. Pitch diam. 900 mm; Electrode diam. 16” 3x buckets charge; Tap-to Tap Time 90 min.; Power on 73 min. Transformer 17/20 M ...

A Hitachi EX1200 Hydraulic Excavator is the basis of the Mantsinen 140 RHC to act as a Ship Unloader for billets. Maintenance records are available including recent major service description. The list of equipment includes several auxiliary parts, such as a lifting yoke, a lifting head and a beam. Make: HITACHI (Japan) – MANTSINEN (Finland) Model: EX1200 – 140 RHC Year (manufacture): 2003/2004 Mothballed since: July 2025 Working hours: circa 21,600 Maintenance history: Serviced in May 2025 incl. lift cylinders overhaul which means it is expected to run for approximately 930 hours until the next service Mass: 910 / 108,000 / 153,000 kg Cabin Elevator / Hydraulic Excavator / Ship Unloader Maximum load: 25,000 kg Engine power / type / family: 482 kW / S6R-Y2TAA-2 / SR-TAA Fuel: Diesel

Guillotine shear LOTZE type HSS 20 / 7Cutting length 2050 mmCutting thickness 7 mmwith single back gauge; used

Hydraulic guillotine shears STEINER type HTS 30/20 RMasch. No. 315 Year of construction 1982Cutting length 3050 mmCutting thickness 20 mmBack gauge 800 mm controlledMotor power approx. 30 kWNet connection 400 volts, 50 Hz- Back gauge with positioning control ELGO- Back gauge adjustment via ball screws- Safety light barrier SICK front as protection against interference- 3 pieces Material Support arms with ball rollers- Electric foot switch- Replacement knifeSpace requirement of the basic machine L x W x H 4650 x 2610 x 3200

Guillotine Shears, Metal Shears DIGEP Type OL 3Workshop Overhauled Guillotine ShearFabr. No. 1312 Year of construction 1977Cutting length 1250 mm (nominal cutting length)Cutting length max. 1300 mmCutting thickness at 450 N/mm² 3 mmSingle back gauge 500 mmStand projection 200 mmCutting angle 2 stroke rate at full cutting length max. 50 strokes/min. Working height 860 mmMotor power 2.2 kWNew connection 380 Volt, 50 Hz- LED cutting area-Lighting- Simple backgauge with manual adjustment- Mechanical

Hand lever shears VEB Scherenbau Nossen type ScDH10Knife length: 180 mmSheet thickness: max. 10 mmFlat material: 50x15 mm4-edge solid material: 22x22 mmRound steel: 24 mmAngle steel: 60x7mmT-steel: 60x7mmon mobile undercarriageWeight: approx. 150 kg; used

Hydr. Swing cut guillotine shears HERA type HSS IIIFabr. No. 598 Year of manufacture 1986Cutting length 3100 mmCutting thickness 3 mmStand projection 200 mmKnife strokes 25 strokes/min. Mains connection 380 Volt, 50 HzMotor power 3 kW- motorized adjustable back gauge 1070 mm- actual digital display for the back gauge- cutting gap adjustment- cutting length adjustment- front side stop left 1000 mm- 4 pieces sheet metal support arms 1000 mm- el. Foot switchSpace requirement without sheet metal support arms L x W x H 3630 x

Swing-cut guillotine shears KÖLLSCHEN type BSK 2000/2Fabr. No. 69 1307 Year of construction 1969Cutting length 2000 mmCutting thickness 2 mmStand projection 90 mmWorking height 920 mmMains connection 380 volts, 50 HzEngine power 4 kW- Drive via geared motor with brake and crankshaft- mechanical sheet metal hold-down- manual back gauge 500 mm- stop adjustment via 2 handwheels, rear on the backgauge guide with measuring scale- front side stop left 720 mm- electric foot switch- manual

Hydraulic guillotine shears FASTI type 509 - 25/4Masch. No. 5418 Year of construction 1991Cutting length 2535 mmCutting thickness 4 mmBack gauge 5-1000 mm (controlled)Cutting angle adjustableHydraulic pressure max. 290 barMotor power 7.5 kWNeching connection 400 volts, 50 Hz- Back gauge with positioning control ELGO ELECTRIC Type 85- Sheet metal holding device under the back gauge- Manual cutting gap adjustment with dial gauge display on the right and left- Stepless cutting length adjustment- Hydraulic

Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

14 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -15 Stand / 56 bars -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 6.00 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 450 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Comme ...

Working width: 1040 mm sheet thickness: 12 mm rear gauge: hand up to 500 mm power: 380 V, 11 kW space: 2500 x 2150 x 1900 mm weight: 4100 kg

Working width: 2500 mm sheet thickness: 4 mm throat depth: 70 mm rear gauge: 520 mm power: 380 V, 6.3 kW space: 3200 x 2300 x 1270 mm weight: 4600 kg

McIntyre 200B Shear Available with or without a stand, this machine might look small but it has a big cutting capacity Small but powerful McIntyre's wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only a blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it. Our company can provide this equipment with short delivery time.

Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg

Working width: 5050 mm thickness: 10 mm power: 30 kW space: 2450 x 5600 x 2500 mm weight: 28000 kg

McIntyre 407 CAT Shear Designed to recover the precious metals found in Catalytic converters, JMC Cat shears also versatile enough to be used anywhere in your yard. Purpose Built McIntyre Cat shears have been purpose built for recovering precious metals from catalytic converters. The Catalytic converter is simply placed in the jaws and cut. The movement of the jaw is directly controlled by the moveable foot pedal and a V clamp holds the Cat in place during cutting. Once cut, the pinched end of the converter can be re-opened using the side bracket attached to the top jaw, allowing the contents to be poured out.

Working width: 4100 mm sheet thickness: 6 mm radius: 100 mm rear gauge: 0-1000 mm power: 18.5 kW space: 4600 x 2200 x 1950 mm weight: 11000 kg

JMC 407 overhauled new model / young device Drive: 7,5 KW Weight: 880 kg 4 x reversible knives Truck intake/wheels