billet shear used for sale

General SKUR0855 LocationBarneveld MakeIKA Werke GmbH & Co KG TypeProcess Pilot 2000/4- ATEX No.05-5463 Year of construction2005 Pressure Working pressure5 Bar Main Features MaterialStainless steel Motor2.2 KW Rotor55 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesdia. 55mm Inletdia 25mm Outletdia. 15mm Number of stages:1 Max. temperature145 degr. C With mechanical sealcheck Motor2.2 kW 230/400 Volt (Ex) Rotor speed7900 rpm MaterialStainless steel 1.4571 (316Ti) Information Mounted on framecheck Total height1,1 M Weight220 Kg CEcheck Floorspace0,7x0,4 M ATEX compatiblecheck Extra Specificationswith barrel of approx. 15 liters (without lid) Inline high shear mixersIKA WerkeMixers > Inline high shear mixersBrand > IKA Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Rea ...

round bar steel: 36 mm square edge steel: 30 mm L-beam: 100x10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical cutting shear, variable angle and motorized backgauge Cutting length: 2000 mm Cutting thickness: 6 mm Cutting force: 11 Tn Backgauge length: 15-740 mm Cutting angle: 2,5º Engine power: 5.5 CV Approx machine weight: 4300 Kgs Machine dimensions: 2650x1750x1080 mm Equipped with: Motorized backgauge Blades

AXIAL CP 1630 hydraulic shear Cutting length: 3100 mm Cutting thickness: 16 mm Throat depth: 350 mm Distance between frames: 3290 mm Cutting angle: 2º Cuts per minute: 8-12 Pump motor power: 50 CV Blade section: 100x40 mm Number of rammers: 25 Approx machine weight: 16.000 Kgs Machine dimensions: 3800x2500x2050 mm Equipped with: Hengstler digital backgauge: 1175 mm of length Ball table: Yes Manual wheel: for accurate approach of the gauge Digital counter for number of cuts: Yes Adjustment of the cutting length: Yes Lighting and projection of the cutting line: Yes Front protection grille: folding Hold down force with independent regulation: Yes Safety photocells: at the rear of the machine

Guillotine Shears QC 12 K - KRRASS 3.2 m x 8 mm - CT8 control unit - Schneider electrical cabinet - REXROTH hydraulic pump - Blade included - Stop 80 cm - Light curtain - Rear cells - 3-point pedal - Optional sheet metal shock absorber - 3 front sheet metal supports - CE-compliant

Key data: 1030 mm, 2 mm

Max. cutting length: 1030 mm Max. sheet thickness: 2.5 mm steel Manually adjustable back gauge up to 530 mm Cutting angle adjustment Side stop and table extension Knife sharpened Weight approx. 800 kg

Offer 23208 Specifications: - max. cutting width 3200 mm - Max. cutting capacity at 45 Kp/mm² 12 mm - Stand projection 175 mm - Cutting angle 1.48° -one. Cutting gap adjustment - Number of hold-downs 13 pcs - Stroke rate up to 10 1/min - front angle stop approx. 1100 mm - 2 front support arms approx. 1100 mm -Mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cutting line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 19.5 kW - Space requirement approx. W 4150 x H 2150 x D 2300 mm - Weight approx. 8.5 t

SCRAP CHOPPER The Model CE450 DDX boasts power alongside a dual driven feedworks. Driving both feed rolls on the chopper allows the unit to process scrap quickly and efficiently. The Model CE450 DDX is Sweed’s chopper of choice for companies processing large volumes of scrap plastic or PET strapping. This chopper is extremely versatile and can be customized for inline automated production applications requiring tension control and custom scrap lengths. The Model CE450 DDX is designed to fit on several Sweed stands that can accommodate a variety of scrap collection containers. Custom stands and additional safety upgrades are also available. Material Reference The recommended model of scrap chopper is determined by scrap size, scrap volume, and requested custom features. The following are materials commonly processed through the CE450 DDX. Please consult a Sweed representative to ...

Inv. Num. : 7366 Type: Hydracrop 70- SD Producer: GEKA Created: 1993 Parameters: Power consumption: 9 kW Impact neck: 500 mm Machine weight: 2400 kg Dimension: 1300 x 2100 x 1800 mm Equipment: 2 foot pedals

Gilotyna do blachy HACO TS 3012 wyprodukowana w 1994 roku w Belgii. Parametry techniczne: -· Made by :- HACO, Belgium · Model :- TS3012 · Year Of Manufacturing: - 1994 · Maximum cutting length: 3050 mm · Maximum cutting thickness: 12 mm · Back gauge stroke: 1000 mm · Main motor power: 22 kW · Maximum operating pressure: 260 bar · Oil tank capacity: approx. 220 Liter · Power supply: 380 V; 50 Hz · Approx weight of machine : 8900 kg

Hydraulic sheet metal cutting guillotine from Safan Netherlands type VS306, 3100 mm x 6 mm (ST40). The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 deg. 11 kW motor. The weight of the machine is 6,3 t. The machine is fast. Departure of the bumper 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 2 supports for supporting sheet metal at the front of the machine, gauge of 2500 mm, for cutting at an angle of 90 degrees. Light dash for cutting along the line. Original DTR documentation and safety instructions in Polish.

Hydraulic sheet metal cutting guillotine from Safan Netherlands type HVR 6-310, 3100 mm x 6 mm (ST40), rb. 1999. The machine is fully CNC controlled by Safan. The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 st, set after entering the thickness and hardness of the material. 11 kW motor. The weight of the machine is 6.3 t. The machine is b. fast, the number of cuts is equal to mechanical. Electric bumpers with reading, bumper departure 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 3 supports to support sheets at the front of the machine, plus a gauge of 2500 mm, for cutting at 90 degrees. Light dash for cutting along a line. Original DTR documentation and safety instructions in Polish. Riding table at the rear of the machine. Protection of the working space with infrared. The machine structurally adapted ...

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 255-10, 2550 mm x 10 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 11 kW motor. Machine weight 8.2 tons. NC electric bumper with position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 30-2550 mm. 2 x supports for holding sheets of metal at the front of the machine, plus a 1500 mm ruler for cutting at an angle of 90 degrees. Light line enabling line cutting. The knives are sharp, the machine cuts copier paper. Original DTR documentation

Unique hydraulic folding machine prod. Favrin Lyon type PHMM 3000x10 mm. Setting the bending angle to max. 140 degrees. Bending 3050 x 10 mm steel (18 mm Alu). Hydraulic drive. Controlling the angle from the desktop. Jaw opening 500 mm. The machine can also work as a press brake. 17 kW drive. Weight 13,500 kg. Documentation.

Hydraulic guillotine for cutting sheet metal from LVD Belgium type HSL 31/6 3100 mm x 6 mm (ST40). The machine has a variable knife gap and a hydraulically variable knife angle of 0.5 - 2 degrees. 9kW motor. Machine weight 4.2 t Bumper departure 750 mm. support for supporting metal sheets at the front of the machine, - ruler 2500 mm long, for cutting at an angle of 90 degrees Original DTR documentation and health and safety instructions in Polish.

Hydraulic guillotine - Gasparini type CO-2504. Cutting length: 2550 mm x 4 mm, Cybelec DNC 10 CNC control. Full CNC change of the knife angle and the inter-knife gap, set by the computer after specifying the thickness. and length of the material. Cutting programs. Cutting sheet metal in the range of 0.4 - 4 mm. Very large loading depth of 520 mm into the machine body (photos), which enables endless cutting of sheet metal from a roll. CNC stop, departure 10 -1050 mm, retraction, programs. A very accurate and precise guillotine. Machine weight 5 tons. 2 supports and a 2000 mm long angle bracket at the front of the machine. Full original Operation and Maintenance Manual in English, BiHP position manual in Polish. A spare set of new cutting knives.

Hydraulic guillotine - AMADA type GPX 630. Cutting length: 3100 mm x 6 mm, full CNC control. Variable angle of the knife and the gap between the knives, set by the computer after feeding the gr. and length of material. Sheet metal cutting in the range of 0.4 - 6 mm. CNC bumper departure 10 -1050 mm, retraction, programs. Machine with automatic support for long sheets of cut sheet metal at the back. Raised rear bumper. Machine weight 6.5 t. 2 supports and an angle bar at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, the main motor only - 5.5 kW. Full original DTR in English and Polish, OHS manual in Polish. The machine is little used, the cutting knives are 95% sharp.

Hydraulic guillotine for sheet metal cutting by Beyeler Switzerland type VR 10-3070, 3070 mm x 10 mm (ST40). Cybelec DNC10 PS fully CNC controlled machine. The machine has a variable gap between the knives and a hydraulically variable knife angle of 1 - 2.5 degrees, set after entering the thickness and hardness of the material. 18kW motor. Machine weight 9 t. Super-fast bumpers - 1050 mm bumper departure. Electrically adjustable cutting length in the range of 10-3070 mm. 2 supports to support sheet metal at the front of the machine, plus a 90 degree cutting gauge. Light line for line cutting. Original DTR documentation and health and safety instructions in Polish. Infrared protection of the rear working area. The machine is designed for continuous operation - 3 shifts.

Hydraulic guillotine for cutting sheet metal from Darley the Netherlands, type GS 3000-10, 3050 mm x 10 mm (ST40). The machine has a variable knife gap and a constant knife angle of 1.5 degrees. 18 kW engine. Machine weight 9 tons. Electric bumper - bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3050 mm. A machine with very small external dimensions. A support for holding sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 310-3, 3100 mm x 3 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 5.5 kW motor. The weight of the machine is 4.2 tons. The machine is fast and the number of cuts is equal to that of mechanical ones. CNC electric bumpers with a position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 75-3100 mm. A system for magnetically supporting large sheets of metal while cutting at the rear of the machine. Support 2000 mm angle bracket, to support sheet metal at the front of the machine. Light line enabling line cutting. Original DTR documentation.

Hydraulic guillotine - AMADA type GPN 630. Cutting length: 3100 mm x 6 mm, Variable knife angle and knife gap. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 16-310, 3100 mm x 16 mm (ST40) The machine has a quickly changing gap between the knives with thickness reading, and a hydraulically variable knife angle of 0.5 -3 degrees. 21 pieces of sheet metal holders. 18.5 kW engine. Weight 12.5 t. CNC bumpers with reading and setting device, bumper travel up to 1200 mm. 2 supports to hold sheets of metal at the front of the machine, and a ruler for cutting at a 90-degree angle. Light line on the material, lighting, central lubrication. electronic cutting length adjustment 10-3100 mm. Single or continuous cutting with adjustable intervals between strokes. Very fast guillotine. Knives 90% new, cutting material from 0.5 to 16 mm. Original OHS documentation and occupational health and safety manual in Polish.

The machine has a quickly changing knife gap with sheet thickness reading and a constant knife angle. 9 kW motor. Weight 4.5 tons. Electric bumpers with reading, bumper departure 850 mm. Supports for supporting sheets of metal at the front of the machine, with a ruler for cutting at an angle of 90 degrees. Original O&M documentation and occupational health and safety manual in Polish. The guillotine cuts sheet metal from 0.8 to 6 mm. The machine is functional, the cutting knives are 90% new.

Reinforced version, for 3-shift work. CNC SC5 control. The machine automatically sets both the angle and the gap after entering the material thickness. The machine has a quickly changing gap between the knives with CNC-controlled sheet thickness reading, and a hydraulically variable knife angle in the range of 1-3 degrees. 7.5 kW motor. Weight 6 tons. Electric bumpers with CNC position reading and setting, bumper travel 1050 mm. The bumper has a retraction function. Supports to hold sheets of metal at the front of the machine, with a ruler for cutting at an angle of 90 degrees. Original O&M documentation and occupational health and safety manual in Polish. The guillotine cuts sheet metal from 0.8 to 6 mm. The machine is functional, the cutting knives are 90% new.

Cutting length: 3100 mm x 6 mm, full CNC control. Variable knife angle and knife gap, set by the computer after entering the gr. and length of the material. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6.5 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 86700 € : 1742.67 € : 3100 mm : 16 mm : 10 mm : 350 mm : 10 1/min : 2 ° : 14 : 61 to : 1000 mm : 200 mm/s : 37 kW : 410 l : 2 Stk. : 818 mm : 550 mm : 3580 mm : 4550 mm : 2250 mm : 3825 mm : 2250 mm : 15000 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglengt ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 56100 € : 1127.61 € : 3100 mm : 10 mm : 6 mm : 50 mm : 13 1/min : 1.5 ° : 16 : 22 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 2 Stk. : 865 mm : 580 mm : 3515 mm : 4200 mm : 2250 mm : 3600 mm : 2100 mm : 9300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 89300 € : 1794.93 € : 4100 mm : 13 mm : 8 mm : 350 mm : 8 1/min : 1.75 ° : 18 : 62 to : 1000 mm : 200 mm/s : 30 kW : 330 l : 3 Stk. : 818 mm : 550 mm : 4520 mm : 5350 mm : 2250 mm : 3650 mm : 2250 mm : 16300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttingleng ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 58600 € : 1177.86 € : 4100 mm : 6 mm : 4 mm : 50 mm : 12 1/min : 1.5 ° : 20 : 17 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 3 Stk. : 865 mm : 580 mm : 4510 mm : 5230 mm : 2300 mm : 3600 mm : 2150 mm : 11750 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 136600 € : 2718.34 € : 6080 mm : 6 mm : 4 mm : 350 mm : 10 1/min : 0,5 - 2 ° : 29 : 20 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 5 Stk. : 900 mm : 630 mm : 6370 mm : 7300 mm : 2150 mm : 3400 mm : 2750 mm : 25500 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port CNC controlled cutting gap adjustment by the table (patented) oil cooler manual central lubrication cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 5 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 48500 € : 984.55 € : 3080 mm : 6 mm : 4 mm : 350 mm : 20 1/min : 0,5 - 2 ° : 16 : 20 to : 1000 mm : 200 mm/s : 11 kW : 125 l : 3 Stk. : 820 mm : 494 mm : 3280 mm : 4100 mm : 2050 mm : 3650 mm : 1950 mm : 7980 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 3 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 181900 € : 3583.43 € : 6080 mm : 13 mm : 10 mm : 350 mm : 10 1/min : 0,5 - 2.5 ° : 29 : 58 to : 1000 mm : 200 mm/s : 37 kW : 400 l : 6 Stk. : 950 mm : 650 mm : 6375 mm : 7400 mm : 2200 mm : 3700 mm : 2900 mm : 33820 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 6 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 64700 € : 1300.47 € : 3100 mm : 13 mm : 8 mm : 50 mm : 13 1/min : 1.75 ° : 16 : 37 to : 1000 mm : 200 mm/s : 30 kW : 330 l : 2 Stk. : 840 mm : 600 mm : 3550 mm : 4280 mm : 2300 mm : 3600 mm : 2350 mm : 12500 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttingleng ...

The machine is in good technical condition. Cutting length 2500 mm The thickness of the cut sheet is 8 mm Steel shear strength 45 kp/mm2 Discharge 300 mm Adjustable angle 2°30- 1°20 Engine 18.5 kW; 1500 U/min El. control pump motor 1.5 kW; 1500 U/min Maximum working pressure 285 kp/cm2 Oil tank volume 225 l Length 3115 mm Width 3078 mm Height 1855 mm Weight approx. 7650 kg

Haco TS 3100 x 12 mm Cutting length: 3100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 17 str/min Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 22 kW Length: 4240 mm Depth: 1900 mm Height: 2100 mm Weight: 10 ton

Haco TS 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 12 > 32 str/min Backgauge: 750 mm Electric motor (power): 7.5 kW Length: 3480 mm Depth: 1500 mm Height: 1800 mm Weight: 6,5 ton

Key data: 2500 mm, 3 mm

powerful crankplate shear WMW ScTP 3.15x2500 - Precise cutting with 10 tons of cutting force - With the powerful cranked clasp shear from WMW, type ScTP 3.15x2500, we offer a reliable cutting machine for precise sheet metal processing. With a cutting force of 10 tons and a torque of 27,500 kgcm, these guillotine shears are ideal for various applications in sheet metal working. Specifications: - Manufacturer: WMW - Model: ScTP 3.15x2500 - Cutting force: 10 tons - Torque: 27,500 kgcm - Sheet thickness: 3.15 mm - Maximum material strength: 50 kg/mm² - Power consumption: 3.5 kW (see nameplate for more data) - With an impressive cutting force of 10 tons, the WMW ScTP 3.15x2500 effortlessly masters sheet thicknesses up to 3.15mm. - The crankplate shears deliver precise cuts that still meet the highest quality standards. - The robust construction and powerful torque make th ...

Inv. Num. : 4970 Type: VS 310-6 Producer: Safan Created: 1981 Parameters: Maximum cutting length: 3100 mm Maximum sheet thickness when cutting: 6 mm Maximum cutting angle: 2 h Oil tank capacity: 150 l Total power requirement: 11 kW Back gauge: 1000 mm Machine weight: 6200 kg

Inv. Num. : 5431 Type: HNTA 3150/10 Producer: Tomášek Created: 2015 Parameters: Maximum cutting length: 3150 mm Maximum cutting thickness: 10 mm Minimum sheet thickness when cutting: 1 mm Total power requirement: 22 kVA Machine weight: 11.5 t

Key data: 2500 mm, 1 mm

Max. cutting length: 2500 mm Max. sheet thickness: 1.75 mm steel Manual backgauge up to 500 mm Side stop and table extension Knife sharpened

Key data: 1530 mm, 4 mm

Schröder MHSU 1500/4,0 - Motorized guillotine shears - Motorized backgauge 750 mm - Hold-down device with hard rubber strip to protect polished sheet metal - Extended extendable support table - All-steel knife 2-flute - Punctures at a distance of 10 mm parallel to the lower knife over the entire course of the table - Selector switch for single and continuous stroke - Rear compartment protection according to CE via 3-beam light barrier and side protective grille -Foot switch - Year of construction 2013 Specification - Effective length: 1530 mm - Capacitance (Rm 400 N/mm²): 4.0 mm - Cutting angle: 2.7° - Stroke rate: 34 rpm - Drive power: 4.0 kW - Nominal power: 5.0 kVA - Power supply: 3x 400 V - Dimensions WxHxD: 2100 x 1410 x 2600 mm - Weight: 1250 kg

Prinzing circular shears type: KSE 12/10, in mint condition with two driven rollers and accessories. For cutting circles approx. 70-1000mm and forming for standing seam.

Hydraulic shear (guillotine) Brand: Gester, Model TN-30, cutting chamber: 770x650 mm, motor: 4 KW (5.5 hp).

Hydraulic Shear PROMECAM GH 1230 A Capacity: 3000 x 12 mm Electrical Back gear gauge travel: 1000 mm Throat depth500 mm Photoelectric cells on the back New blades Length3600 mm Depth: 2400 mm Total height: 1900 mm Weight: 11 T

Haco TS 3100 x 12 mm Cutting length: 3100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 17 str/min Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 22 kW Length: 4240 mm Depth: 1900 mm Height: 2100 mm Weight: 10 ton

Sapphire 120L high shear mixing tank Stainless, high shear mixing vessel, variable speed mixer, pressure vessel, jacketed with adjustable temp settings, bottom mounted high shear, central bottom discharge, mobile, 1Ph

Key data: 2050 mm, 3 mm

Machine Type: Guillotine Shears Manufacturer: SCHARRINGHAUSEN Model No.: HS-III Year of construction: 1964 Condition: good Offer Type: Used Machine Specifications: Capacity: 2050 x 3.0 mm Drive type: el./mech. Propulsion: 5.5 kW Remark: backgauge, El. foot release, front stop rail, Machine feet Weight: 2700 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Specifications: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle hydr. adjustable 0.5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 17 pcs - Motor backgauge 15 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 17 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 900 mm - Space requirements incl. back gauge, without front support arms -ca. W 4040 x H 2230 x D 2230 mm - Weight approx. 10500 kg -with: - E-foot switch - Cutting line illumination - - Cutting length preselection via potentiometer - Rear area protection with grille

The JMC 407 is the top seller among our alligator claws. It is cost-effective, has sufficient knife length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, piping, motors, gearbox housings. The scissors are also often used for cleaning scrap metals or cutting vehicle radiators. The machine is equipped with a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. By means of a foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted by means of simple clamping screws. The scissors are from our demonstration pool and can be viewed or tested.

Machine Type: Guillotine Shears Manufacturer: RAS Model: 54.30 Year of construction: 1975 Condition: very good Offer Type: Used Machine Specifications: Capacity: 1040 x 4.0 mm Drive type: el./mech. Propulsion: 7.3 kW Remark: rip fence, Material supports and stop at the front, 2 spare blades Weight: 2000 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.