billet shear used for sale

sheet width - max.: 200 mm plate thickness: 6 mm flat steel: 70 x 7 mm round bar steel: 13 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 800 x 500 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm no. of strokes: 12 - 24 Hub/min cutting angle: 1 ° 30 work height max.: 865 mm back stop - adjustable: 1.0 - 1000 mm down holder: 20 Stück Control: ENC 100 M column arm: 50.0 mm oil volume: 200 ltr total power requirement: 15.0 kW weight: 11460 kg range L-W-H: 5230 x 2250 x 2150 mm New price ~ 50,000 euros () Special price on request ----------------------------------------------------------- NC electro-hydraulic swing cut shears with DURMA ENC 100 M control manual cutting gap adjustment (eccentric) including pneumatic sheet holding device for thin sheet metal cuts ----------------------------------------------------------- Equipment: - robust electro-hydraulic swing cut shears - including DURMA ENC 100M NC control unit Back stop pre-selection - X axis Quantity Cutting length limitation Pivoting opera ...

sheet width: 3050 mm plate thickness: 13.0 mm thickness at Niro-steel: 8.0 mm cutting angle: 0.5 - 2.5 ° no. of strokes: 8 - 25 Hub/min back stop - adjustable: max. 1.000 mm Control: SIEMENS Number of downholders: 13 Stk. oil volume: 300 ltr. engine output: 21.0 kW weight: 8700 kg. range L-W-H: 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear Design: Circuit-guided - NC electro-motorized backgauge with SIEMENS NC control unit OP 7 Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090203 : prompt, Zwischenverkauf v : Türkei : 3810 € : 1 : 1020 mm : 1.5 mm : 500 mm : 1950 mm : 1000 mm : 1150 mm : 420 kg welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2004 : 9726 : prompt, Zwischenverkauf v : Türkei : 6750 € : 1 : 1350 mm : 3 mm : 35 1/min : 1.5 ° : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 1700 mm : 1350 mm : 1200 mm : 950 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side support arm 2 supporting arms user manual in GERMAN does not complie with the German UVV and Austrian AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-maschinen.com/en/lp/used-machines The data for this ad was created with ModulMW ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 25000 € : 480 € : 2050 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7.5 kW : 800 mm : 530 mm : 2355 mm : 2720 mm : 1630 mm : 1230 mm : 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090187 : prompt, Zwischenverkauf v : Türkei : 14400 € : 276.48 € : 1 : 1350 mm : 3 mm : 35 1/min : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 1900 mm : 1350 mm : 1260 mm : 1060 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side lay 2 supporting arms light barriers on the back of the machine user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090132 : prompt, Zwischenverkauf v : Türkei : 47500 € : 798.38 € : 1 : 41800 € : 3100 mm : 6 mm : 4 mm : 50 mm : 15 1/min : 1.5 ° : 16 : 14 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 2 Stk. : 865 mm : 500 mm : 3515 mm : 4110 mm : 2200 mm : 3700 mm : 2100 mm : 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Var ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 13900 € : 266.88 € : 3.5 mm : 750 mm : 2.2 kW : 6,1 m/min : 2000 mm : 600 mm : 1400 mm : 750 kg : 200/1200 mm Rahmen aus geschweißter Stahlkonstruktion Klingen aus Spezialstahl Lange Lebensdauer der Messer dank der konisch gelagerten Wellen Getriebemotor mit Bremse System zur Einstellung des Schnittdurchmessers mit motorisierter Leistung Mobiles Steuerpult System zum Schneiden des Innendurchmessers Ausrüstung gemäß CE Regulierungen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7500 € : 144.75 € : 2 mm : 700 mm : 1.1 kW : 7,5 m/min : 1400 mm : 400 mm : 1150 mm : 360 kg : 120 / 1.000 mm : 280 mm gearbox motor with brake footpedal central lubrication OPTIONAL EQUIPMENT (PRICE ON REQUEST): pneumatic upper roll feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 68700 € : 1298.43 € : 3100 mm : 13 mm : 8 mm : 50 mm : 13 1/min : 1.75 ° : 16 : 37 to : 1000 mm : 200 mm/s : 30 kW : 330 l : 2 Stk. : 840 mm : 600 mm : 3550 mm : 4280 mm : 2300 mm : 3600 mm : 2350 mm : 12500 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttingleng ...

Guillotine Shears Fasti 506-10-2.5 BJ 1991

HABEGGER Grignoteuse meuleuse ist eine Nage- und Schermaschine (Nibbling und Shearing), ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Angaben zu Arbeitskapazitäten sind in den vorliegenden Informationen nicht enthalten. Technische Daten wie Drehzahlen, Verfahrwege, Leistung oder Abmessungen wurden nicht angegeben. Entwickelt, um enge Toleranzen zu erreichen und für Anwendungen, die präzise Bauteilfertigung erfordern Technische Daten ohne Gewähr

: neu : ca. 12 Wochen ab Auftrags : Türkei : 29200 € : 557.72 € : 3200 mm : 2 mm : 1.2 mm : 3650 mm : 1700 mm : 1300 mm : 3100 kg NC-controlled backgauge 750 mm ELGO P40T touchscreen Rear light barrier protection Front finger guard cover Extendable front support bracket Cutting line illumination Equipment compliant with CE directives Operating instructions in German or English OPTIONS: Sheet support, front or rear unloading € 1.900,00 Sheet support, front andrear unloading(NC controlled) € 2.840,00 (gauging length decreases approx. 200 mm) 1000 mm servo-backgauge € 900,00 Side gauge extension to 2 m € 410,00 Sheet metal carriage with rollers (capacity 1,000 kg) € 1.040,00 Angle stop € 460,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16400 € : 314.88 € : 2050 mm : 3 mm : 35 1/min : 1.5 ° : 750 mm : 3 kW : 800 mm : 520 mm : 2720 mm : 1575 mm : 1230 mm : 1900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 2 cutting edges on the lower blade 800 mm squaring arm with scale 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 59600 € : 1126.44 € : 3100 mm : 10 mm : 6 mm : 50 mm : 13 1/min : 1.5 ° : 16 : 22 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 2 Stk. : 865 mm : 580 mm : 3515 mm : 4200 mm : 2250 mm : 3600 mm : 2100 mm : 9300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

Offer 26220 Technical data: - Cutting length 3050 mm - Cutting thickness at 400 N/mm² strength 16 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 18 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min - Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm - Autom. Cutting angle adjustment according to sheet thickness - Cutting length limitation - Autom. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4500 x H 2250 x D 2200 mm - Weight approx. 14500 kg

Silverson EX High shear mixer on stand Stainless high shear mixer on stand, 3Kw, 750mm shaft length, high shear diameter 105mm, 3Ph

Reliable tool that combines power, precision and comfort. This device is designed for those who value efficiency, time savings, and ergonomics, regardless of their level of gardening experience. Auction-ID: A7-49495-224

Reliable tool that combines power, precision and comfort. This device is designed for those who value efficiency, time savings, and ergonomics, regardless of their level of gardening experience. Auction-ID: A7-49495-24

Reliable tool that combines power, precision and comfort. This device is designed for those who value efficiency, time savings, and ergonomics, regardless of their level of gardening experience. Auction-ID: A7-49495-124

cutting length: 2500 mm plate thickness: 3 mm distance between columns: 2050 mm blade length: 2650 mm total power requirement: 3 kW weight of the machine ca.: 2,5 t - The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6080 mm plate thickness: 6.0 mm rear stop: 1000 mm cutting angle: 0.5 - 2.0 ° down holder: 29 Stk no. of strokes: ca. 10 Hub/min total power requirement: 22.0 kW dimensions of the machine ca.: 7300 x 2150 x 2750 mm weight: 25500 kg Current list price: approx. 150.000 euros Features: - Electro-hydraulic, slide-guided sheet metal shear - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Electrically driven backgauge with ball screws - Manual central lubrication - Cut line illumination - Ball bearings in the table - Fold-up finger guard, 1.000 mm - Side stop with T-slots, tilting stop, and scale - 5 support arms with T-slots - Photoelectric sensors on the rear of the machine - 1 freely movable foot switch Includes optional equipment: - Pneumatic sheet metal holding device The data for this ad was created with ModulMWS - the software so ...

sheet width: 2540 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,60 t dimensions of the machine ca.: m Manual backgauge up to 550 mm Side gauge and table extensions Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26238 Technical data: - Max. working width 3190 mm - Max. material thickness at 40 kg/mm², strength 6.3 mm - Cutting angle 1.2 ° - CNC - Cutting gap adjustment - Strokes 30 to 64 1/min - Stand projection 100 mm - Table height approx. 800 mm - Number of hold-downs 16 pcs - Back gauge 5 - 1000 mm - 3 pieces front support arms 1500 mm - E – Footswitch - Rear tilting roller table - Drive 400 V / 18.5 kW - Space requirement approx. W 3900 x H 1800 x D 2100 mm - Weight approx. 6800 kg - with : - CNC control RAS system - Rear tilting roller table / sheet metal hold-up - Rollable material collection container - Electronic rear space protection / light barrier

Offer 26213 Technical data: - Max. working width 1030 mm - Max. material thickness at 40 kg/mm² strength 2 mm - Adjustable back gauge 10 - 500 mm - Front angle stop - Front support extendable approx. 400 mm - Space requirement approx. W 1250 x H 1050 x D 750 mm - Weight approx. 700 kg

Manufacturer: Baykal Type of machine: mechanical guillotine shear Year of manufacture: 1996 Technical Specifications: - Cutting length: 2520 mm - Operating voltage: 380/50/3 (V/Hz/Ph) - Motor power: 7.5 kW - Strokes per minute: 48 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. - Back gauge 10 - 750 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 9 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space required including back gauge, without front support arms - approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - with: - E. - Foot - Switch - Cut line illumination

Offer 26300 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. Back gauge 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - with: - E. foot switch - Cut line illumination

Tafelschere LVD HST ? C 40/6 Hersteller: LVD Type: HST ? C 40/6 Baujahr: 1995 Zustand: gut, gebraucht. Hydraulik neu abgedichtet. Messer geschärft Schnittleistung in ST37 6,35 mm Maxi. Schnittlänge 4050 mm El. Hinteranschlag 1000mm El. Schnittwinkel 0,5 bis 2 ° El. Schnittspaltregelung 0,05-0,8mm Trittfrequenz 10 bis 45 Hübe / min 7,5 kW Motor Ölbehälter 150L Gewicht 9500 kg Transportmaße L x T x H ca. 5,0 x 2,2 x 2,2m Aufstellmaße L x T x H ca. 5,0 x 3,1 x 2,2m Auflagetisch mit Kugelrollen 3x Auflagearme 1,5m Skala Dokumentation

Amada Promecam 420 GTH Tafelschere Hersteller: Amada Typ: Promecam 420 GTH Zustand: gebraucht Schnittlänge: 2000 mm Materialstärke: 4mm in Stahl Hinteranschlag: elektr., 750 mm Motorleistung: 5,5 KW Gewicht: ca.3300 Kg

Darley GS 4100 x 16 mm CNC Cutting length: 4100 mm Max sheet thickness st 45: 16 mm Depth of throat: 100 mm Strokes/min: 6 > 9 str/min Backgauge: CNC Adjustable cuttingedge: 2° Electric motor (power): 33 kW Length: 4500 mm Depth: 2350 mm Height: 2200 mm Weight: 18,5 ton

: neu : ca. 10 Wochen ab Auftrags : Türkei : 29000 € : 553.9 € : 2050 mm : 4 mm : 42 1/min : 750 mm : 7.5 kW : 800 mm : 450 mm : 2700 mm : 2300 mm : 1350 mm : 2800 kg motorizedback gauge atrecirculating ballscrew with Control DT5 hold down with rubber pads Side Lay with T-Slot 2 Sheet support arms ball in the table tape measure tilting stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lg.Nr. 26248 Technical data: - For bases / discs up to approx. 4 corner sheet Ø 1200 mm - For bases / discs up to approx. 8 corner sheet Ø 1500 mm - Knife body projection 240 mm - Projection guide bar 900 mm - Max. cutting capacity at 45 Kp/mm² 4.0 mm - Drive speed infinitely variable 6 to 30 m/min - man. Material clamping + man infeed of the knife - Drive 400 V / 3.00 kW - E. footswitch - Space requirement approx. W 2450 x H 1700 x D 950 mm - Weight approx. 1300 kg

Diosgyörer, OLG12-3050, Hydraulic, up to 12mm, Cutting length: 3050, Weight: 15to, L-350, W-220, H-240cm

Manufacturer: SAFAN Model No.: 310-6 Year: 2006 Condition: Used Stock Number: 9487 Maximum cutting length: 3100 mm Maximum cutting thickness: 6 mm Machine weight: 6120 kg

Cutting length mm 2.500 Cutting thickness mm 6 Max cutting power KN 218 Back gauge travel mm 750 Cutting angle adjustment degrees 1.5 Strokes per minute 18 - 36 V-opening mm 30 Number of hold-downs n° 12 Length mm 2.995 Depth mm 1.750 Height mm 1.910 Approximate weight kg 4.500 Auction-ID: A1-48745-22

Opklapbare achteraanslag Cutting length: 3100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 17 str/min Backgauge: CNC SP8 - 1000 mm Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 22 kW Length: 4050 mm Depth: 1900 mm Height: 2200 mm Weight: 10 ton

Operating voltage: 380 V Frequency: 50 Hz Connection: 22 kW Nominal power Sheet thickness steel: 450 N/mm² Sheet thickness: 12 mm Max. working length: 3000 mm Max. speed: 88 mm/s Infeed max. tool weight: 31.5 kg Reference: Zafa - Lot 12 Auction-ID: A7-49882-100

sheet width: 3100 mm plate thickness: 4.0 mm thickness at Niro-steel: 2.5 mm cutting angle adjustment: 1.0 ° back stop - adjustable: 10 - 1000 mm adjustment speed: 180 mm/s down holder: 21 Stück strokes per minute: 18 - 31 column arm: 200 mm Control: ELGO P8721 oil volume: 160 L 0: max. 300 bar voltage: 400 V main drive: 7.5 kW weight of the machine ca.: 4800 kg. dimensions of the machine ca.: 3660 x 2070 x 2140 mm from a maintenance workshop good condition () Features: - Electro-hydraulic sheet metal shear (swing cut) - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left for positioning the electrically driven backgauge Target/actual position value input possible Adjustment via three-phase motor using a toothed belt - Support table with ball bearings Recessed handles between the table plates - Front finger guard -  ...

A Geka ironworker with integrated punching unit for punching and shearing flat bar, section steel and bar stock is offered. Punch diameter/material thickness: 28mm/13mm, flat bar shearing capacity: 300mm×10mm/200mm×13mm, max. round bar diameter: 30mm, max. square bar dimensions: 30mm×30mm. Including tool cabinet with various punch and die units as well as a stop extension to 3m. The flat bar and section steel shearing units were hardly used. An on-site inspection is possible.

Beyeler, CP 4100x10, Cutting length : 4100mm, Max. sheet thickness 10mm,

sheet width: 2025 mm plate thickness: 3.0 mm distance between columns: 2050 mm no. of strokes: 38 Hub/min cutting angle: 1.38 ° Control: konv. total power requirement: 4.0 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features: - Robust / high-performance electromechanical sheet metal shear - Manual material backgauge Infinitely variable adjustment range Adjustment from the rear - via handwheel Includes mm scale - 1x side stop - 3x front support arms - 1x freely movable foot switch - rear sheet metal chute - front sheet metal removal for smaller workpieces - digital piece counter - control cabinet - mounted on the front left The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting clearance: manual Condition of knives: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of Holds: 18 Length and number of plate carriers: 5x 500 mm, 1x 1500mm, side stop 1500mm including ball transfer units Equipped with high-holding device: No Working height: 770mm Auction-ID: A1-47360-82

Manufacturer: Jean Perrot Type: MK.2006 Year: 1981 Vehicle number: 8971018 Release date: 10/03/1981 Equipment: electrically adjustable rear gauge, digital position display, on/off controls, cutting control, worktable with sheet metal supports Width displayed on order: 369.5 mm Remarks: Pre-owned condition with visible traces of oxidation. Auction-ID: A1-49695-244

Machine number: 5150 Working length: 1450 mm, max. power: 3.5 mm Reference: STS - Lot 7 Auction-ID: A7-49882-248

Machine number 139/6238/11

This is a Lefort Mobile 800 shear baler designed for processing light scrap and car bodies. It is the AS variant, which means an asymmetric box where one side is higher than the other to fit in more scrap per load. Originally manufactured in 2006, this machine was factory refurbished in 2011, after which it was sold to the previous owner. We took it back in part exchange earlier this year and have prepared it for sale. The machine does require some refurbishment work and can be sold either as seen or with a package of work completed. For more information, please contact us.

Häner Metal Shears HMS18.25 Excavator weight: 18 - 25 t Operating weight: 2,350 kg Dimension A: 2,760 mm Dimension B: 950 mm Dimension C: 520 mm Dimension D: 730 mm Rotation: 360° Front cutting force: 160 t Rear cutting force: 110 t Interchangeable blades: yes Hydraulic Hoses Turn: 1/2 inch Hydraulic hoses open/close: 1 inch Oil flow rate rotation: 30 - 40 l/min Operating pressure on/off: 280 -300 bar Oil flow rate open/close: 180 - 240 l/min Cutting performance: Steel plates: 30 mm U-beam: 300 x 100 x 15 mm H-beam: 300 x 100 x 15 mm T-beam: 320 x 15 mm Angle iron: 200 x 200 x 18 mm Round steel: Ø 70 mm Steel tube: Ø 245 x 10 mm Cycle time: 8 - 12 s Auction-ID: A1-50077-1620

Inoxmim 500L High shear mixing vessel 2020, Stainless mixing vessel, top mounted agitation with scrape surface, bottom mounted high shear mixer 7.5Kw, jacketed both steam and water, with digital temperature display and a Thermosiphon vessel, mobile, with PDF manuals, 3Ph