134,900 used machines on RESALE, but how to find them? Machine Search
sheet width: 2520 mm plate thickness: 3.2 mm ST cutting thickness max.: 5.0 mm AL cutting thickness max.: 1.5 mm VA no. of strokes: 34 Hub/min cutting angle: 1° 20 Grad back stop - adjustable: max. 1.000 mm work height max.: 800 mm total power requirement: 7.5 kW weight of the machine ca.: 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition () Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - ESTUN NC digital display - type E10-S - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms - 1x freely movable foot switch - origina ...
380V 16A Plug Foot control Sheet thickness 1.5 mm Cutting width 1.05 m Length 1.50 m Width 1.70 m Height 1.35 m Color: Green Weight 400 kg Adjustable table Extra table
A Durmazlar guillotine shear distributed through Knuth is available. Working width: 3020mm, max. sheet thickness: 8mm, motor power: 18.5kW, stroke: 140mm, stroke rate: 14/min, max. pressure capacity: 210bar, oil tank capacity: 250l. Machine dimensions X/Y/Z: approx. 2650mm/3400mm/2300mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible.
A guillotine shear is offered. Cutting length: 3000mm, cutting capacity steel: 2mm - 6mm, cutting capacity stainless steel: 3mm. Equipped with back gauge, front support tables, finger protection guard. Inspection possible by arrangement.
sheet width: 1250 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,80 t dimensions of the machine ca.: m Powered Backgauge Side Stop and Table Extensions Cut Length Limitation Cutting Line Illumination Light Barrier for Rear Area Guarding The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
LVD MVN 3100 x 4 mm Cutting length: 3100 mm Max sheet thickness st 45: 4 mm Depth of throat: 100 mm Strokes/min: 20 > 70 str/min Adjustable cuttingedge: 0.5 to 1.5° Electric motor (power): 15 hp Length: 3720 mm Depth: 1415 mm Height: 1830 mm Weight: 4500 kg
Hydraulic shearing machine manufactured in 2018. This HACO TSX3006 MOT features a maximum cutting length of 3050 mm and a cutting thickness capacity of 6 mm for mild steel. It includes automatic blade gap and rake angle adjustments, along with a backgauge adjustment range of 1000 mm. If you are looking to get high-quality shearing capabilities, consider the HACO TSX3006 MOT machine we have for sale. Contact us for further details.
Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line limit, with documentation. An on-site inspection is possible.
CNC shearing machine manufactured in 2010. This LVD MVS-TS 13/31 features a maximum cutting length of 3100 mm and a cutting thickness of 13 mm. It is equipped with a backgauge range of 1000 mm and a powerful motor with 21.5 kW. If you are looking to get high-quality shearing capabilities, consider the LVD MVS-TS 13/31 machine we have for sale. Contact us for further details.
Max. cutting length: 2540 mm Max. sheet thickness: 2 mm steel Manual back gauge up to 550 mm side stop and table extensions Knife sharpened 1600 kg
used
LVD HST-C 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 12 > 50 str/min Adjustable cutting device: 0,05 > 0,8 Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 9,5 kW Length: 4110 mm Depth: 1820 mm Height: 1850 mm Weight: 5,5 ton Number of sheet holders: 21x
: 3050 mm : 06,5 mm : - : 0,5-2,5 ° : 1000 mm work height max.: 770 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching capacity steel: 25x16mm, material strength: 45/60/80kg/mm² depending on hole diameter, angle steel 90°: 110x10mm, angle steel 45°: 90x9mm, T-steel 90°: 110x10mm, T-steel 45°: 90x9mm, U and I profiles: up to NP/IPE 18, round steel diameter: 42mm, square steel: 38x38mm, max. sheet thickness for notching: 12mm, notching width: 50mm. An on-site inspection is possible.
cutting capacity: 2,5 mm mm throat: 750 mm round blank diameter max.: ca. 1500 mm weight of the machine ca.: ca. 800 kg includes on set of new replacement tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3100 mm, 6 mm, 1000 mm
Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Year of construction: 2002 Motor power: 7,5 kW SP8 Command Blades with 4 cutting edges Voltage: 380 V Photocells at the back Length: 4000 mm Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Weight: approx 5 T
Key data: 3000 mm, 6 mm
The dimensions of the machine are LxWxH 2000mm x 3800mm x 1400mm. The weight is approx. 3500kg. The machine is in a little-used condition.
sheet width: 2540 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,60 t dimensions of the machine ca.: m Manual back gauge up to 550 mm Side gauge and table extensions Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC punching and cutting system Finn-Power in need of repair, including an automation and stacking system STR 6, is available. Punching force: 300kN, cutting force: 250kN, max. operating pressure: 300bar, max. material thickness: 8mm, max. punching diameter: 89mm, turret stations: 20, axis speed: 150m/min, positioning speed: +/-0.1mm, repeat accuracy: +/-0.05mm, machine weight: approx. 28000kg, operating hours: approx. 40342h. The thread-cutting unit is non-functional. Documentation available. An on-site inspection is possible.
CNC shearing machine manufactured in 2009. This Baykal HNC 3100x13 features a cutting capacity of 13 mm and a cutting length of 3,060 mm. It is equipped with a powerful 30 kW motor and operates at a working pressure of 260 bar. If you are looking to get high-quality shearing capabilities, consider the Baykal HNC 3100x13 machine we have for sale. Contact us for further details.
Guillotine Shears WEIKA 3200x10mm -Exhibition Machine / Unused -Cutting length 3200mm -Max. cutting thickness - steel 10mm Hjbkn Auowatxgj S Tjl - Max. cutting thickness - stainless steel 6mm -Max. cutting thickness - aluminum 12mm -Electric digital backgauge -Footswitch -Light barrier / Right -Left -Front support with ball rollers -Drive power 11KW Dimensions: LxWxH 4x2x1.9 meters / Weight 8000Kg
HAULICK Roll Sheet Shears / Circular Knife Shears -Max. sheet steel: approx. 2.5 mm -Cutting length: endless (unlimited) -Cutting method: 2 rotating circular knives -Cutting blade diameter: approx. 120 – 150 mm - Table size: approx. 500 x 250 mm -Projection / feed range: approx. 250 mm -Motor power: 0.75 – 1.1 kW -Drive: Belt drive -Straight cuts -Strip cutting -Endless cutting of metal sheets -Sheet steel up to approx. 2.5 mm -Aluminium and non-ferrous metals correspondingly stronger Dimensions: LxWxH 0.6x0.9x1.1 meters / Weight 180Kg
Key data: 2040 mm, 1 mm
with manual depth stop 5 - 500mm, can be operated from the rear, with extendable sheet metal support, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 2040 mm Blechstärke Stahl/Sheet thickness steel 1,25 mm Sheet thickness Alu 1.75 mm Blechdicke VA/Sheet thickness stainless 0.80 mm Farbe/Colour grün Machine Weight: 650 kg Dimensions/Space requirment 2442 x 756 x 1056 mm Cutting gap adjustment without Automatic hold-down Backgauge min. 5 Back gauge max. 500 mm Machine Number: 3540
sheet width: 1270 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,00 t dimensions of the machine ca.: m Manual backgauge with hand crank Cutting gap adjustment via handwheel Side gauge and table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic shearing machine manufactured in 2021. This KNUTH KHT H 3010 NC features a working length of 3080 mm and a throat depth of 150 mm. It includes a Cybelec Touch 8 control for optimal positioning of cutting gap, angle, and length. The robust backgauge and standard blades are suitable for stainless steel. If you are looking to get high-quality shearing capabilities, consider the KNUTH KHT H 3010 NC machine we have for sale. Contact us for further details.
Offered is a RAS guillotine shear. Cutting length: 4040mm, max. steel sheet thickness: 5mm, backgauge range: approx. 5mm-1000mm, cutting angle: approx. 1.0°, stroke rate: approx. 28-46strokes/min, control system: RAS System 2005, weight: approx. 9200kg. Inspection by appointment possible.
sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1100 mm : 1010 mm Cutting length: variabel mm cutting gap adjustment: variabel mm connected load: 5,0 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1,8 x 1,6 x 1,7 m Hydraulic guillotine shear with - Cutting gap adjustment - Support arms - Squaring arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3000 mm, 4 mm, 800 mm
Hydraulic Shear SAGITA BEYELER Capacity: 3100 mm x Max thickness 4 mm Electric Back rear stop travel: 800 mm Voltage: 380 V Length: 4000 mm Width with part support: 3700 mm Width without part support: 2000 mm Total height: 1500 mm Weight: approx 5 T
sheet width: 4050 mm plate thickness: 10 mm weight of the machine ca.: 18 t distance between columns: mm total power requirement: kW dimensions of the machine ca.: m Delem DAC-362 NC-control programmable limit stop automatic cutting crack adjustment automatic cutting angle adjustment The machine has only 800 working hours Technische Daten / technical details: Schnittlänge / max. cutting length 4050 mm Schnittleistung / cutting capacity 10 mm Ausladung / overhang 210 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 15 kW Gewicht der Maschine ca. / weight 18000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2550 mm, 4 mm
Hesse & Co MS 2504 - Guillotine Shears with Geared Motor - Year of construction 2011 Technical data - Cutting capacity: 4 mm - Cutting length: 2550 mm - Cutting angle: 1° 30' - Stroke per min: 42 - Table width: 450 mm - Table height: 800 mm - Back gauge (max. length): 750 / 100 mm - Motor power: 7.5 kW - Operating voltage: 400 V - Dimensions WxHxD: 3050 x 1330 x 2260 mm - Weight: 3300 kg
A hydraulic AMADA NC guillotine shear is offered. Cutting length: approx. 3050mm, max. sheet thickness: approx. 6mm, min./max. cutting angle: approx. 0.4°/2.2°, backgauge travel: approx. 1000mm, backgauge traverse speed: 100mm/s, max. stroke: approx. 160mm, max. stroke rate: 45strokes/min, control: AMADA NC control. Including sheet handling system. Machine dimensions X/Y/Z: approx. 3800mm/2250mm/2100mm, weight: approx. 6500kg. Inspection by appointment possible.
sheet width: 3050 mm plate thickness: 10 mm : 11 kW range L-W-H: 4000 x 2220 x 1830 mm weight: 6.300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3050 mm plate thickness: 10 mm control: Elgo 87 P2 : 11 - 31 Hub/min cutting angle adjustment: 1 - 4 ° Number of hold downs: 16 Stück : 900 kg : 11 kW table width: 700 mm table height: 800 mm range L-W-H: 4000 x 2220 x 1830 mm weight: 6300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch stamp -Manufacturer: Mubea, shearing tool for square steel / round steel -Item No.: 0502805202 -Square steel: 27x27 mm / 50x50 mm -Round steel: Ø 31/56 mm -Number: 2x shearing tools available -Price: per piece -Dimensions: 185/185/H40 mm -Weight: 8.8 kg/pc.
Key data: 2540 mm, 6 mm
Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Motorized adjustable back gauge (2 speeds) up to 1000 mm with analogue display Side stop and table extensions Cutting length limitation Cut edge lighting Knife sharpened Weight approx. 5500 kg
guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg
sheet width: 2035 mm plate thickness: 6 mm distance between columns: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width - max.: 2535 mm plate thickness: 4.0 mm ST plate thickness: 2.5 mm VA plate thickness: 6.0 mm ALU number of strokes - loaded: 20 Hub/min cutting angle: 1.7 ° work height max.: 900 mm total power requirement: 8.5 kW weight of the machine ca.: 3400 kg range L-W-H: 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition () Features: - Robust electro-hydraulic guillotine shear swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions Special accessories included: - Pneumatic sheet metal holding device f ...
sheet width: 3060 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: max. 10 - 15 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° back stop - adjustable: 6.0 - 750 mm Control: ELGO P9521 total power requirement: 18.5 kW weight: 6300 kg range L-W-H: 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s - 1x stable side stop With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with ...
sheet width: 1050 mm plate thickness: 4.0 mm thickness at Niro-steel: 3.0 mm distance between columns: 1200 mm blade length: 1150 mm no. of strokes: 46 - 69 Hub/min cutting angle: 1.30 ° Control: konv. oil volume: 100 ltr. total power requirement: 5.68 kW weight: 1100 kg From a maintenance workshop In good condition () Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge Backlash-free ball screw for backgauge Travel speed 100 mm/sec - Electric cutting length limiter Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF) The data for this ad was created with ModulMWS - the softwa ...
sheet width: 3100 mm plate thickness: 3 mm rear stop: 1000 mm down holder: 18 Stk cutting angle: 0.5 - 1,0° 30° ° oil volume: 150 l total power requirement: 5,5 kW weight: 4300 kg dimensions of the machine ca.: 3800 x 1950 x 1600 mm Features: - Manual rear stop (front via handwheel) - Manual cutting angle adjustment - 1x front support arm - 1x side stop - Front finger guard - Operating instructions (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1530 mm plate thickness: 4.0 mm thickness at Niro-steel: 2.0 mm no. of strokes: max. 34 Hub/min cutting angle: 2.70 Grad distance between columns: 1540 mm work height max.: 920 mm voltage: 400 V Control: konv. engine output: 3.2 kW weight of the machine ca.: 1115 kg. range L-W-H: 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions Optional accessories included: - Sheet metal holding device for thin sheet metal blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2050 mm plate thickness: 3.0 mm distance between columns: 2100 mm back stop - adjustable: 550 mm no. of strokes: 35 Hub/min cutting angle: 2°12 table width: 400 mm table height: 850 mm Control: konv. total power requirement: 3.0 kW weight of the machine ca.: 1280 kg dimensions of the machine ca.: 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge Continuously adjustable range Adjustment from the back via handwheel Includes mm scale Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - rear safety device (light barrier) - operating instructions (machine control system) - Transport stand (homemade) T ...
sheet width: 4100 mm plate thickness: 6.35 mm thickness at Niro-steel: 4.00 mm cutting angle: 0.5 - 2.5 ° cutting gap adjustment: 0.05 - 0.8 mm no. of strokes: 9 - 26 Hub/min back stop - adjustable: 10.0 - 750 mm down holder: 22 Stk. oil volume: 200 ltr. engine output: 7.5 kW weight: 8000 kg. range L-W-H: 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours () Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment Includes digital display of actual values - Manual cutting gap adjustment via handwheel from the front (left) Includes analog value display - Electro-motorized backgauge with ball screws Includes digital act ...
sheet width: 3100 mm plate thickness: 13.0 mm thickness at Niro-steel: 8.0 mm down holder: 14 Stück no. of strokes: max. 11 Hub/min cutting angle: 1°15 work height max.: 770 mm column arm: ? mm oil volume: 300 ltr. control: konv. total power requirement: 15.0 kW weight: 11800 kg range L-W-H: 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge on recirculating ball screws Movement by push-button (forwards backwards) including ELGO digital position indicator - Manual quick cutting gap adjustment by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency s ...
sheet width: 170 mm plate thickness: 0 mm number of rolls: 0 weight of the machine ca.: 0,1 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 6000 mm plate thickness: 6 mm distance between columns: 610 mm Control: Elgo 87 P2 total power requirement: 15 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 4050 mm plate thickness: 20 mm distance between columns: 4100 mm column daylight: 4200 mm no. of strokes: 10-20 Hub/min working pressure: 250 bar total power requirement: 85 kW weight of the machine ca.: 43,6 t dimensions of the machine ca.: 5,5x2,8x2,9 m No. 793 Please note: this machine has no electrical system. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team ...
sheet width: 4000 mm plate thickness: 6 mm distance between columns: 4100 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
