biele used for sale

GANTRY SHEET HANDLING SET Biele Gantry stacker Sheet metal handling set Gantries and stackers for sale High capacity stacker with high capacity and weights to stack all kinds of material, sheets, etc. In factories, industrial buildings,... The main measures of the machinery are: Complete tour of up to 9,100 mm. Width 8,200 mm. Height 2,640 mm. Length of the support 12,000 mm and which in turn has a width of up to 1,100 mm. ó long, high capacity and weights to stack all kinds of material, sheets, etc. In factories, industrial buildings,... The main measurements of the machinery are: Full travel of up to 8,500 mm. Width 4,500 mm. Height 2,850 mm. Length of the support 4,000 mm and which in turn has a width of up to 1,500 mm. ó long, high capacity and weights to stack all kinds of material, sheets, etc. In factories, industrial buildings,... The main measureme ...

x-travel: 2800 mm y-travel: 1000 mm z-travel: 1200 mm table surface area: 2000 x 800 mm rotary table dia.: 800 mm spindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/min max. torque on the spindle: 3000 Nm spindle drive: 30 kW feeds longditudinal/cross/vertical: 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical: 7 m/min control: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mm wotkpiece diameter with 2 vacant positions: 200 mm workpiece length: 400 mm weight of tools max.: 16 kg tool changing time: ca. 8 - 9 sec internal coolant system feed: ja / yes total power requirement: kW weight of the machine ca.: 25,4 t dimensions of the machine ca.: 6,6 x 3,15 x 2,98 m = 5-axis CNC-bed-type milling machine with integrated NC-rotary table and NC-swivelling milling head - Acc.: tool pre-setting device, various tool fixtures ...

Description: Working size 20 - 100/105 mm - General conditions: the peeling head has been completely overhauled / according to the attached images, the system has been completely checked/cleaned. The plant has been completely checked/cleaned / the entry rollers are present but need to be checked/adjusted accordingly / the roller table in the exit area needs to be replaced. - Important note: the plant is equipped with a chip transport system. PLANT DISMANTLED WITHOUT DOCUMENTS For transport, the following are required: 4 hydraulic jacks weight approx.: 18,000 kg, Approx. Onsite Dimension. (l x w x h): 15,000 x 6,000 x 3,000 mm

x-travel:1000 mm y-travel:480 mm z-travel:480 mm table width:315 mm table length:1250 mm table - longitudinal motion:1000 mm :1250 x 315 mm turning speed range:28 - 1400 U/min power capacity:3,7/4,4 kW total power requirement:6 kW weight of the machine ca.:2800 kg 100 % before loading warranty: none one used knee and column milling machine-universal, make UNION Bielefeld, type USF 4, Baujahr 1970, Maschinen-Nr. 55/214

used cone round wherker Benier type Allround with adjustable angles for small and large weights.Kegelrundwiker is with heating and oiling.The cone round wherk is immediately available in the warehouse in Bielefeld. We will be happy to send you further pictures and details on request. Weight range from 100-1300 grams up to 4500 pieces / hrs ( depending on the dough weight) with leakconveyor belt with heating with oiling Built in 2005 Teflon coated cone and wire cara Dimensions: Height: 150 cm Width: 134 cm Depth: 132 cm

used ilapak Delta G E horizontal bagging machine with running sealing jaws. The machine is mainly used for the production of sealing packages and protective fumigation to extend the durability of various products. The machine requires electricity, compressed air and, if necessary, water. The system can be seen in the photos without a transport table, but of course there is also the transport table. The total length of the machine is about 6400mm depth is 1160mm and height 1550mm plus labeler. The labeler is from Werner Hermann.The packaging machine is about 1600 kg heavy. Until recently, small cartons of Berliners were packed at the plant. The plant is complete and ready for loading in our warehouse in Bielefeld. Payment and shipping on request. 380 Volt Connection 50 Hz 6500 watts Weight approx. 1600 kg incl. labeler

used Benier brotteig precursor with adjustable wits completely in stainless steel.The machine is immediately available in the warehouse in Bielefeld.Further used bakery machines please see the catalogue on the right we have more than 700 machines in stock in Stock. Built in 2002 400V / 50 Hz Stainless steel cladding with 2 blowers Scrapers are adjustable checked and cleaned Condition "good" Dimensions: Height: 150 cm Width: 220 cm Depth: 110 cm

Thermo oil trolley oven Heuft VTR 08.12,5.10 used Thermo Roll car stove Heuft VTR 08.12.5.10 from year of construction 2002 is currently for sale and immediately Available in our warehouse in Bielefeld. -Thermo Roll Wagon Furnace Heuft VTR 08.12.5.10 -Thermo Roll Cart Oven Bakery by Heuft VTR 08.12,5.10. -There are 1 piece ovens with 10 floors of digital control each, each oven is for 2 rack trolleys 60x80cm transversely one after the other. The ovens are immediately available in the warehouse ready for loading. - 1 piece Heuft VTR 08.12,5.10 Thermo Roll trolley furnaces - each oven for 2 rack trolleys 60x80cm - Oven are with 10 floors - Door stop on the right - with exhaust hood including fan - Ovens are immediately ready for loading in the warehouse - Year of construction: 2002

Croissant winder Fritsch BCW 1000 tableside machine used table croissant wrappers from Fritsch Model BCW 1000 also suitable for cutting tables immediately available for sale in the warehouse in Bielefeld. -380 volts

The slicer for cutting cakes. Adjustment of the piece size by means of sliding knives (grid system). The knife bars can be changed quickly. The machine can be used at different production sites, and the swivel castors make the machine mobile. The machine is easy to clean. The machine is visually and technically in good condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. Krumbein Cake Slicer KSSM-0.1D suitable for trays 60x40 cm and 60x20cm Individual adjustment of the piece size Longitudinal and cross-section rotating knives with protective glass the cleaning of all soiled machine parts, can be done in the dishwasher changing the cutting plane is done manually the immersion of the knives in the cake as well as the cutting feed are carried out manually Machine weight 165 kg Specificati ...

White M95 Poppy Mill used poppy mill from Weisse Bäckereitechnik Maschinenbau for sale from stock Bielefeld. Built in 2005 If necessary, always freshly squeezed poppy Maximum yield and very good quality of the grinding material With the adjustable pressure roller, the grinding quality can be individually adjusted High working speed Easy to use and clean Clean working by spring-energising scrapers

A used dough cradle W&P Parta U with stainless steel cladding is currently for sale and immediately available in our warehouse in Bielefeld. Dough divider WP Parta U - with 1 chamber - Stainless steel clad - Weight range: 300 grams to 2800 grams - Hourly output: 925 to 1050 pieces - the dough divider is in baker's condition

A used shared oven Miwe Condo CO 5.0806 from 2011 is currently for sale and immediately available in our warehouse in Bielefeld. This stove is equipped with stone slabs, with 5 floors each 80x60cm and digital Miwe FP control and exhaust hood including exhaust motor. Bakery Shared Oven Miwe Condo CO 5.0806  -Type: CO 5.0806  -5 floors each for 1 sheet 80x60 cm sheets -each floor with separate Miwe FP control -each floor can be switched on and off separately -Upper and lower heat separately adjustable -each floor with separate swath box (steam) -requires fixed water connection -each floor with exposed glass door -Stainless steel cladding  -digital control -Oven can be moved on castors on swivel castors  Specifications:  400 / 230V 3/N/PE 50 Hz / 29.1 kW Year of construction 2011 External dimensions: Width 110cm Depth: 120cm Height: 191cm Floor entrance height: 17 ...

Stikken Oven Hein Luxrotor LR-86-2 used rotary oven for bakery by Hein Model Luxrotor LR-86-2 with gas burner and 2 rack trolleys for sale from stock Bielefeld. -Sheet metal size 58x78cm -with 2 Stikkenwagen -each Stikkenwagen with 15 runs -Door stop on the right -with exhaust air hood -with digital control -Year of construction 2011 -400 Volt 3kW 50 Hz -Nominal heat output 74 -External dimensions without hood: Width: 154cm Depth: 142cm Height: 235cm

In-store oven Miwe Aeromat 4.64 R DUS used in-store oven Miwe Aeromat 4.64 R DUS with fermentation cabinet from 2000 is immediately available for sale in our warehouse in Bielefeld. In-store oven Miwe Aeromat 4.64Caling cabinet - Miwe aero in-store oven - Type: Aeromat 4.64 - digital Miwe DS control - for 4 sheets 60x40cm - with fermentation cabinet - with vapour destroyer - Year of construction 2000 Specifications: 400V / 230V / 50Hz 10.4 kW Dimensions with hood: Height: Width :90cm Depth: 100cm

used bread packaging machine Hartmann Automat VS 320 is for sale and immediately available in our warehouse in Bielefeld. The machine packs breads into bags and closes them with clip tape. The machine is also suitable for Arabic bread. Bread packaging machine Hartmann Automat VS 320 Year of construction : 09 / 2012 Voltage: 3x400V/N/PE 50Hz Power Input 4 kW Weight 1600 kg

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009 Sale exclusively to traders or export! We have more than 400 bakery machines and more than 300 ovens permanently in our warehouse in Bielefeld. Multiback Bakery Technology Artur-Ladebeck-Straße 171 Bielefeld

A used bread slicer Treif Pegasus 2602 from 1997 is currently for sale and immediately available in our warehouse in Bielefeld. Bread slicer Treif Pegasus 2602 - Bread slicer without oiling - for long loaves of bread - completely in stainless steel - with cress knife - can be driven on castors - Year of construction 1997

Lifting kneader Kemper F 150 ASL completely overhauled Completely overhauled Kemper lifting kneader Model F150ASL with 2 to 7 stainless steel boilers for a maximum of 240kg dough each.The machine is completely overhauled and repainted, new electrics, new ball bearings, new gears.The machine can be inspected and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - at 2 speeds - with 2 automatic timers (new) - with stainless steel lifting arm - per kettle max. 150kg flour or 240kg dough - with flour dust cover - Boiler with handle - all ball bearings grained - complete electronics new - V-belts new - Machine completely repainted

used shared shop oven Wachtel Piccolo I-5 DMS 3 Master Timer from year of construction 2011 is immediately available for sale in the warehouse in Bielefeld. The furnace is tested for function and cleaned. -5 floors each 60x80cm -each floor with separate control -each floor with upper and lower heat separately adjustable -each floor has its own steam box for steam -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction 08/2011 -electrical power supply 26.9 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 237cm

Lifting kneader Kemper F 125 A completely overhauled used Kemper lifting kneader with 2 stainless steel boilers each max. 200kg dough.The machine is completely overhauled and repainted, new electrics, new ball bearings, new gears.The machine can be visited and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. -with 2 speeds -with 2 automatic timers -with stainless steel lifting arm -per boiler max. 125kg flour or 200kg dough -with flour dust cover -Boiler with handle

Belt round knitter Kemper SBR-2500 Kemper belt round knitter with 2500mm long belts, with flour spreader.Speed adjustable via pot, machine can be moved on rollers, height adjustable. The machine is visually and technically in good condition, can be visited and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request.

Shared oven Miwe Condo CO 4.0608 2D used shared oven Miwe Condo CO 4.0608 2D shared oven from 2004 is currently for sale and immediately Available in our warehouse in Bielefeld.Shared oven Miwe Condo CO 4.0608 2D Miwe Condo shared oven with 2 double chambers so 4 floors plus proofing cabinet plus steamer. The stove is with Miwe FP 12 control, each floor 60x80cm long. Immediately available 40 pieces of Miwe Condo in stock. 4 floors for each 60x80 cm sheets 2 double-chamber floors, each with one controller each floor with stone baking slabs Entrance floor height 13 cm digital control Miwe FP control can be driven on swivel castors Proofing cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Specifications: YEAR: 2004 400/230 V / 50Hz / 20.9 kW Electric

Fortuna Automat A4-30 dough dividing and warping machine A used dough part and warp knitting machine Fortuna Automat A3-30 with knitting switch is currently for sale and immediately available in our warehouse in Bielefeld. Dough part and warp knitting machine Fortuna Automat A3-30 with active cabling switch - 30s division - with 3 knitting plates - with active cabling switch - electric head - Weight range dough pieces 40-110 grams - Dough insert per serving plate 1200-3600 grams - Weight of the machine approx. 540 kg

Bread packaging machine Bag packaging machine Hartmann VS 320 Bag packaging machine Hartmann Automat VS 320 is for sale and immediately Available in our warehouse in Bielefeld.The machine packs breads into bags and closes them with clip tape.The machine is also suitable for Arabic bread pita and the like. Bread packaging machine Hartmann Automat VS 320 Year of construction : 1998 Voltage: 3x400V/N/PE 50Hz Power Input 4 kW Weight 1600 kg Pita Bread Arabic Bread Pack

Shared oven WP Matador Store 6.4 A used electrically heated shared oven WP Matador Store 6.4 for bakery and confectionery is currently for sale and immediately available in our warehouse in Bielefeld. The stove is equipped with base and exhaust hood. Floor oven W&P Matador Store 6.4 - 4 floors each 60x40cm -per floor one sheet 60x40cm -1 x Hood 8 x ADK with RBA 0.1 kW 230 Volt - 1x base 6.4 600 - with exhaust air hood including vapour condenser -electrical data per floor: 3.6kW; 3-400V; 1.45 kW - Year of construction External dimensions approx. Width : 93cm Depth 100cm Height: 210cm incl. hood Floor entrance height 14cm Oven is functionally tested and cleaned -Oven can be inspected and tested in our warehouse

Bakery rotary oven WP Rotoththerm REC1280 4 pieces from year of construction 2006 and 2007for sale from stock Bielefeld. -for 1 rack trolley -Sheet size 58x98cm -with gas burner -Year of construction 2006 / 2007 -with exhaust hood -with WP Navigo control -with ramp -Door hinge right

Spiral kneader Kemper ST 125 A + 2 boilers used spiral kneader Kemper ST 125 A extendable with 2 stainless steel boilers immediately available in the warehouse in Bielefeld. Trade-in and shipping costs on request. Type: SP 125 A with 2 boilers, optional extra boiler to purchase for max. 125 kg flour or for max. 200 kg dough with 2 automatic timers Boiler diameter 90cm -Bott capacity: 300 litres Boiler drive by friction wheel Boilers are manually locked extendable with 2 automatic timer relays 2 speeds fast and slow Flour dust cover Stainless steel spiral and tools Boilers are also made of stainless steel Machine is anchored in the ground with 2 screws Machine head moves up and down when the boiler is retracted and extended 400 volt power supply robust and stable machine Tested for function

Deck oven 2 pieces Miwe Ideal 1200/5 R-DS Gas -2 deck ovens Miwe Ideal 1200/5 R-DS for sale from stock Bielefeld -the ovens are both with gas burner -both built in 1995 -both 5 floors each 120cm wide and 200cm deep -both ovens with Miwe DS control -an oven is equipped with 2 pull-out cookers -both ovens with exhaust hood

Spiral mixer Kemper ECO 75 The used Kemper ECO 75 spiral mixer is currently for sale and immediately available in our warehouse in Bielefeld. Delivery and trade-in possible. - 2 slow and fast speeds - 2 timers with automatic switch-on and switch-off - with plastic flour dust cover - Boiler, spiral and guide rod made of stainless steel - Push-button control - Boiler capacity approx. 175 litres - Boiler diameter inside 76cm, boiler height inside 44cm - Boiler right counterclockwise rotation - Manual and automatic switch - Machine is on rollers with 2 brakes - Easy to use and clean - Capacity for a maximum of 120 kg of dough or for a maximum of 75 kg of flour - Built in 2000 - more pictures and information on request - Shipping and trade-in on request - Machine can be inspected and tested in our warehouse

Lifting kneader lifting swaging machine Diosna D 200 Plus A used lifting kneader Diosna D 200 Plus is currently for sale and immediately available in our warehouse in Bielefeld. Lifting kneader Diosna D 200 Plus with fixed Kesel - with stainless steel boiler - Kettle for maximum 200 kg dough or for max. 125 kg flour - 2 speeds slow and fast - with flour dust cover - mobile on wheels - Machine completely repainted - with stainless steel control box - with 1 timer NEW - many parts renewed - Boiler polished - 380 volts

A used spiral kneading machine Kemper SP 125 L is currently for sale and immediately available in our warehouse in Bielefeld. Spiral kneading machine Kemper SP 125 L - Stainless steel boiler - Stainless steel spiral - 2 x automatic timers - 2 x slow and fast speeds - with flour dust cover - for 125 kg of flour or 200 kg of dough The machine can be inspected and tested in our warehouse. Shipping and trade-in as well as further information and pictures on request.

Dough filling and dosing machine Rheon KN 200 Cornucopia used Rheon KN 200 dough filling and dosing machine.The machine has been tested for function, can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - Dough pieces: 10-300 gr. - Output : 10-60 pieces/min -digital control - Stainless steel cladding - rollable on wheels - used Rheon KN 200 for bakery confectionery

Dough part and warp knitting machine Kemper semi-automatic BT30 - Type: BT30 30-100g - Size 3 - 30 pieces - 380 volts - 0.55 kW 1.5A 50 Hz - Weight range 30grams to 100 grams - Weight insert 9000 grams to 3000 grams We will be happy to send you further pictures and details on request. You can visit the machine at our company during opening hours or by appointment, a test run with your own is also no problem. The machine is immediately available in the warehouse in Bielefeld.

Fritsch Rollfix 60 / 650 E sheeter Dough sheeter from Fritsch Model Rollfix with reel immediately available in the warehouse in Bielefeld. Pictures are without tapes, but the machine is sold with new tapes. -Bandwidth - with reel - with digital computer control

Lifting mixer Diosna S35 2G A used lifting mixer Diosna S35 2G is currently for sale and immediately available in our warehouse in Bielefeld. -Lifting mixer Diosna S 35 -with stainless steel boiler -for max. 35 kg dough -with 2 speeds -with foot switch -with protective cover -Boiler diameter inside: 52cm -Boiler height inside: 35cm -Machine completely repainted

Hook block, lower bottle, pulley, wire rope, single GEBRÜDER DICKERTMANN BIELEFELD Type 611 Load capacity: 5 t ( 5000 kg ) Rope pulley diameter: Ø 250 mm rope diameter: Ø approx. 25 mm single hook with safety hook opening: 55 mm Material: steel used, checked! Dimensions: 630 x 270 x 120 mm

rack oven Wachtel Compact 1.8 Revolution from 2015 with gas burner and 2 rack trolleys with 18 shelves each for 58x78cm baking trays. The stove is completely assembled and immediately available in the warehouse in Bielefeld. Trade-in and delivery available, more pictures and details on request. -Year of construction 2015 -with gas burner -Door hinge on the left -with exhaust hood including fan -with digital control -for 60x80 or 58x78cm trays

Component size: Max. diameter 150 mm, height 112 mm, min. diameter: 70 mm, height: 64.2 mm CNC Path Control Sinumerik 840 D For more technical data, see PDF Electrified viewing possible in Bielefeld

Used milling machine on behalf of a customer Manufacturer: Bokö Bohner & Köhle Type WF 2 Hydro Mill At the moment, the machine can still be viewed under electricity. ATTENTION Location: Bielefeld Sale from foundation.! Dismantling must be carried out by the customer. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, ...

Upper bottle, pulley, wire rope clamp, single GEBRÜDER DICKERTMANN BIELEFELD Type 621 Load capacity: 8 t ( 8000 kg ) Rope pulley diameter: Ø 310 mm rope diameter: Ø 20 mm suspension: Suspension eye ( vertebral eye: Ø 48 x 110 mm, swivel and swivel diameter suspension eye: Ø 32 mm Material: steel used, tested ! Dimensions: 880 x 330 x 120 mm

A used rack oven Wachtel Compact 1.8 KHV Stir from 2013 with gas burner is for sale and immediately available in our warehouse in Bielefeld. The stove is fully assembled in our warehouse. Rack Oven Rotary Oven Wachtel Compact 1.8 KHV Stir - Year of construction 2013 - with gas burner - Door hinge on the right - with exhaust hood including fan - with digital control - for 60x80 or 58x78cm trays - Operating voltage: 400 volts -Control voltage. 230 volts - Frequency: 50 Hz - Power 2.5 kW -20 pieces in stock -External dimensions approx.: 158x170x280cm WxDxH Trade-in and delivery possible, further pictures and information on request

Croissant cutting and wrapping station Rondo Doge SCM 50 A10 for filled products used from stock Bielefeld immediately available. -Croissant cutting table by Rondo Doge -Model SCMG50. A0 -Built in 2003 -400 volts

Spiral mixer extendable from Kemper with 2 stainless steel bowls, for max. 120 kg dough per kettle. Kemper ST 75 A spiral mixer for the production of high-quality doughs. Bread doughs, bread doughs, pastry doughs and similar doughs can be kneaded. Kemper spiral mixers work with 3 zones kneading principle, with spiral and guide rod, so the dough becomes woolly and easy to process with maximum oxygen input into the dough. The machine is visually and technically in good condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. Boiler diameter inside is 90cm and boiler height inside is 76.5cm. with 2 stainless steel boilers for max. 75 kg flour or max. 120 kg dough with 2 automatic timers Boiler diameter 76.5cm -Tub capacity: 175 liters Boiler drive by friction wheel Boilers are hand-locked ex ...

Used spiral mixer Kemper SPL 75 for the production of high-quality doughs. The machine can be switched slowly and quickly with 2 levels in automatic mode via 2 timers. The boiler, spiral and tool are made of stainless steel. Boiler can be switched with right and clockwise rotation. The machine is immediately available in the warehouse in Bielefeld. Machine is with new wear parts and repainted Machine completely redesigned -the following parts are renewed, buttons, clocks, ball bearings, V-belts, seals, Cable and machine repainted -2 speeds slow and fast -2 timers, automatic switch-on and switch-off - with plastic flour dust cover -Boiler, spiral and guide rod made of stainless steel -Push-button control -Boiler capacity approx. 175 litres -Bowl diameter inside 76cm, kettle height inside 44cm -Boiler right counterclockwise rotation - Manual and automatic switcher - Machine  ...

Protein Shake Automat BODYSHAKE Smart Touch S, 32 Inch Full Hd Toushscreen, Automatic Cup Dispenser, with Coin Acceptor, Fresh Water Connection, Product Requires Internet via Lan, NFC Reader, Dimensions approx. 185 cm high, approx. 72 cm wide, 70 cm deep, Weight approx. 160 kg, The dispensing takes place at the truck loading ramp, Gustav-Bielefeld-Straße 2, Attention: Loading ramp height approx. 1.10m! Vehicle with lifting platform (truck) or Sprinter with pallet truck or ramps required (with another vehicle you need enough strong people to lift down the goods), The distribution takes place at the truck loading ramp, Gustav-Bielefeld-Straße 2, Attention: loading ramp height approx. 1.10m! Vehicle with lifting platform (truck) or Sprinter with pallet truck or ramps required (for another vehicle, you need enough strong people to lift the goods down)

Key data: 35 kN

SUMITOMO SD35E 35Ton Injection Molding Machine The high-speed injection molding machine for all challenges Manufacturer: Sumitomo Model No.: SD35E 35t Plastic Injection Molding Machine Clamping force: 35 t Power: AC 200V, 30V, 125A Inverter: 21A Heating power: 4.8 KW Weight of the injection compound: With the built-in extrusion screw approx. 100g Included: DRD III Yushkin high-performance robot Year of manufacture: 04/2000 Condition: At the time of shutdown, the machine was in perfect condition while CD production was running There are 2 identical machines available, the price is per machine The machine is currently still tied up in our customer's factory in Bielefeld and will be handed over to our customer due to a restructuring of the production processes. We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex  ...

x-travel:720/1100/1300 mm y-travel:320 mm z-travel:450 mm table load:500 kg :360x1325 mm T-slot (width-distance-quantity):3 x 18 x 80 mm spindle taper:50 ISO turning speed range:vertikale Spindel: 60-1750 U/min (12 Stufen), horizontale Spindel: 60-1800 U/min (12 Stufen distance spindle nose and table:vertikale Spindel: 190 ? 590 mm, horizontale Spindel: 20 ? 470 mm feeds:X/Y/Z: 30-750 / 20-500 / 15-375 mm/min rapid travel x/y/z:1000 / 1000 / 750 mm/min weight of the machine ca.:2,7 t machine dimensions LxWxH:1820/2520 (1600 Tischlänge)x2100x2000 mm spindle drive:vertikal: 3 kw, horizontal: 5 kW universal milling head:manuell schwenkbar, 360° CNC controls from:Siemens/Fanuc/Heidenhain 100 % before loading warranty: none one used knee and column milling machine-universal, make UNION Bielefeld, type USF 4, Baujahr 1970, Maschinen-Nr. 55/214

x-travel:720/800/1370 mm y-travel:300 mm z-travel:400 mm table load:400 kg :300 x 1270 mm (Option: 320x1370) mm T-slot (width-distance-quantity):3 x 14 x 80 mm spindle taper:40 ISO turning speed range:vertikale Spindel: 45-1660 U/min (11 Stufen), horizontale Spindel: 35-1500 U/min (12 Stufen distance spindle nose and table:vertikale Spindel: 260-660 mm, horizontale Spindel: 75-475 mm feeds:X/Y/Z: 0-1000 / 0-1000 /0-750 mm/min rapid travel x/y/z:1000 / 1000 / 750 mm/min weight of the machine ca.:1,9 t machine dimensions LxWxH:1720 /1820 (1370 mm Tischlänge) x 1680 x 1860 mm spindle drive:2,9 kW universal milling head:manuell schwenkbar, 360° CNC controls from:Siemens/Fanuc/Heidenhain 100 % before loading warranty: none one used knee and column milling machine-universal, make UNION Bielefeld, type USF 4, Baujahr 1970, Maschinen-Nr. 55/214