bending used for sale

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm engine output: 2,2 kW bending speed: 5,3 m/min weight: 1360 kg range L-W-H: 2.320 x 900 x 1.200 mm Furnishing: - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - Digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 64100 € : 1282 € : 2550 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 4800 mm : 1460 mm : 1550 mm : 6800 kg STANDARD EQUIPMENT fully hydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing hardened rolls 2 working speeds central lubrication system protectionagainst overload moveable control pane user manual in GERMAN and ENGLISH machine and equipment accordingto the CE regulations OPTIONAL EQUIPMENT ground and polished rolls infinitely adustable speed of rolls hydraulic/mechanic adjustable upper and lateral supports aut. material withdrawal changeable upper roll for especially narrow bending radii IMPORTANT ISSUES AT CONICAL B ...

Working length: 2050 mm Round bending: 5 mm Bending: 4 mm Top roller: Ø 150 mm Under-roll: Ø 225 mm Equipped with: - Profile iron bending device - Sentences Profielrollen -Operating instructions Motor power: 3 kW Machine LxWxH: 3300 x 1050 x 700 mm Machine weight: 2000 kg

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 64000 € : 1299.2 € : 4535 mm : 1145 mm : 1400 mm : 1488 kg : 18 cm³ : 76 x 3,6 mm : 76 x 2,3 mm : 70x70x3 mm : 70x50x3 mm : 70x50x6 mm : 76 mm : 200 mm : 10 mm : 195 ° : 1,5/3 (50/100Hz) : 3 kW : 50 l Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C) New TCPlus control • 7” colour touch screen • Icons for ease use • Automatic mode, manual mode, programming mode • Advanced OFFSET function • Easy language change • Auto-tuning of the main machine components • Programmable bending speed for each single bend of the program • Unlimited programs possibility (USB port) • Every program can contain up to 30 different bends • Available extensions of 2 meters each (optional) • Tie bar (optional - art. TB80-TI) The data for this ad was created with ModulMWS - the so ...

3-roll bending machine SCHÄFER type SRMVS Masch. Nr. Year of manufacture: 1973 , sheet length: 2000 mm, sheet thickness: 16 mm, top roll, diameter 250 mm, bottom roll, diameter 230 mm , roll speed 7 rpm. Rolling speed approx. 5 meters min. Mains connection 380 volts, 50 Hz. - all 3 rollers driven - symmetrical roller arrangement - motorized upper roller adjustment- conical bending via inclined adjustment of the upper roller with coupling for one-sided adjustment - lateral start-up for conical bending - motorized lower roller adjustment , individually for the front and rear roller- right and left rotation via control button in the control panel - swing-out hinged bearing and spindle support to relieve the upper roller Dimensions L x W x H 4200 x 1900 x 2200 mm Weight 10.6 ton. good condition; used

Hand tube bending device, hand tube bender set, pipe bender DAKO Model 247 Ø 15 5 - 18 - 22 mm maximum bending angle: 180 degrees with 3 bending segments in metal case used, tested ! Dimensions ( metal case ): 675 x 325 x 90 mm

- min/ max bending thickness 10/60 mm - bending width 4500 mm - weight of bending rolls 172 t - dimensions L11,19 x W5,08 x H5,6 m

Manufacturer: Lang Maschinenbau GmbH & Co. KG Type: EL-HY168 F CNC PLC: Siemens Simatic S7 Control system NCU: Siemens 840D CNC control: MMI Multicontrol 2000 Dimensions and weight: Net weight: 33t max. tube Ø: 168.3mm max. bending radius Rm: 700mm min. bending radius Ri: 80mm Pipe extension length: 6000mm max. bending angle: 190° max. torque of resistance at St35W: 201cm3 electr. Connected load: 400V/50Hz Full load current: 85A

Tube bending machines PROVAR 5-90 U-D, working length: 4500 mm The PROVAR 5-90 U-D (Series 90) is a fully automatic, 5 axes tube bending machine: bending (Y axis), advancement (X axis) and rotation (Z axis). The PROVAR 5-90 U-D can bend tubes up to 90 mm in diameter and lateral movement of the positioner and the mandrel (axes B1 and B2). The PROVAR 5-90 U-D can bend tubes up to 90 mm in diameter and has two levels of equipment per fixed and variable radius or two different fixed radii. The following are fitted as standard: - heat exchanger; - early mandrel extraction; - automatic mandrel lubrication.

Bending device, round bending device PAGUS Bending diameter: Ø 41, 55, 58, 84 mm Jaw height: 50 mm Step insert: Ø 87/75 mm fastening in vice ! Dimensions: 760 x 200 x 200 mm

4 roll plate bending machine 3100 x 28 mm brand new year 2023 ready. MG model M3028 Capacity plate 3000 mm bending thickness 28 mm prebend 22 mm dual pre-pinch technical data: -length of rolls 3100 mm -top roll dia. 380mm -lower roll dia. 360mm - Power electric 20Hp weight 17ton Configuration fully hydraulic -Hardened surface of the 4 rolls , smooth finishing suitable for stainless steel plates rolling -Digital position readout with memory set -Conical bending plates , contrast pad hardened , rollers angle tiltable -Driven rolls hydraulic plate dragging with axial gear unit each powered rolls. -Opening front hydraulic to unload closed shells. -Rerolling system for welded plates calibration precise rounding. -Control console electric commands with digital readout -Safety installation and emergency stop according to regulation

CNC Plate Bending Roll Year 2021 Approx. 100 hours Number of Rolls 4 Rolls length 10’ 2” Top Roll diameter 18.2” – less deflecting thanks to Planetary Guide Technology Bottom Roll Diameter 16.6” Side Rolls diameter 14.2” Smallest possible diameter 21” thank to planetary guide technology Rolling Speed 20 ft/min (imperial) Installed power HP 72 (Energy Saving Technology) Power Supply V., 60 Hz Rolls material High resistance, heat treated, tested & certified Carbon Steel Rolls Hardening Induction surface up to 48 – 62 HR Rockwell C, according to Customer’s application and rolls materials Rolls Periph, Speed compensation Automatic (no torque loss, no operator setting needed) Rolls Crowning Top and lower (clamping) rolls are standard crowned to compensate Rolls deflection Rolls guiding Friction-free, mill-scale-proof, lubrication-less planetary guides R ...

Profile bending machine, bending machine, tube bending tool -Handover: in the current condition as seen -Accessories: 1 damaged pressing tool: 3/4, see photos -suitable for: pipe size 1/2 to 1 1/2 -Dimensions: 630/670/H440 mm -Weight: 36kg

Machine has been purchased for a project It has been used for bending 1500 Ton in 3 years Maximum thickness of material machine bending is NPI220, generally it is used between 180-200 Rolls diameter : 660 mm Power : 37 Kw Shaft Ø mm : 280/260 mm Bending Speed : 7 m/min

HAVEN mandrel bender for fi 65 NC tooling for the pipe fi 48.3 and fi 60.3, automatic lubrication and mandrel extension, length of the feed from the wheel approx. 5 m, excellent condition, used occasionally for bending fi 48.3 x 1.5 easy operation, possibility of setting several different bending angles, fast bending

Sahinler HPK 40 Profile Bending Machine Many tools are included(Pipe bending tool diameter between 10-42 mm and profile bending tool between 10x10 - 40x40 ) Machine is in very good condition

Cansa NC 76 hydraulic pipe bending machine MAchine is in excellent condition 60 mm and 76 mm mold comes along with machine Maximum bending capacity 76X4 mm diameter Hydraulic motor power 15 kW Max. 190 bending angle Mandrel length 4000 mm

Max. Twisting capacity 16x1,5 (Steel pipe) Max.Bending Radius 40 mm Twisting speed 500 ° / s Unlimited program writing Control unit Bosch Rexroth Twisting precision ± 0.05 ° Max.bending angle 185 ° Feeding length 2000 mm Unlimited number of bending programs Rotation speed 720 ° / s Feeding precision ± 0.05mm Feed speed 1.2m / s Rotation accuracy ± 0.05mm Twist direction change time 3 sec Weight 850 kg Dimensions (Width) 1000 mm Dimensions (Length) 3250 mm Dimensions (Height) 1800 mm

Crippa cnc pipe bending machine All hydraulic elements have been revised It bends up to 323mm pipes. It is fast and sensitive. It has Turkish software and touch screen panel. There are 5 types of bending dies and mandrels. Rotation and advancement are servos. Our machine has no problems and can make very serial bending.

Hydraulic cnc mandrel bender for pipes and profiles The rasi numerical bender for pipes and profiles ensures bending without deformation, distortion or change in diameter. The bent pipes retain their shape and the fitted mandrel prevents the formation of folds and deformations. Possibility of 3D mandrel bending from pipes with a diameter of 10 to 60 mm and profiles from 10x10 mm to 40x40 mm. Bending tools included: cylindrical: -profile 20x10 -profile 40x20 - pipe fi 10 - pipe fi 20 - pipe fi 30 - pipe fi 40 pin: -profile 20x10 -profile 40x20 - pipe fi 10 - pipe fi 20 - pipe fi 25 - pipe fi 30 - pipe fi 40 - pipe fi 17.2 - pipe fi 21.3 - pipe fi 26.9

Hydraulic mandrel bending machine with a lot of accessories Preselection of 8 different bending angles with digital display Digital length display as well as digital display of torsion Max. effective length: 6096 mm Round tube steel (S 235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm Max. bending angle: 180° Weight: approx. 1800 kg

Dural Cnc-60 5 axis tube bending machine Machine never used before Max. Tube Diameter: Ø60 mm x 3 mm Max. Center Line Radius : 220 Max. Bending Angle: 190 Max. Tube Length: 2500 Max. Feeding Length With Mandrel (mm): 3700 Bending Speed (°/sec): 80 Feeding Speed (mm/sec): 1~800 Turning Speed (°/sec): 150 Max. Pressure: 160 Total Power (3 Axis) : 17.25 Kw Total Power (4 Axis) : 18 Kw Total Power (5 Axis): 24 Kw

Key data: 3200 mm, 6 mm

For sale is: 1 piece used 3 roll round bending machine Manufacturer: MTP Type: RM11-6 x 3200 Year: 2008 Max. bending thickness: 6mm Max. bending width: 3,200mm Power: 5.5Kw The machine can be viewed in our warehouse in 09599 Freiberg.

Key data: 2040 mm, 6 mm

Specifications: Roll length 2040 mm Bending capacity 6 mm at 450 N/mm² Bending capacity approx. 80% of the bending capacity Upper roll diameter 170 mm Rear roll diameter 170 mm Lower roll diameter 165 mm

Type: A89 TNCB Parameters: Manufacturer: CSM Taiwan Year of production / SO / GO: 2014 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Main parameters: Max bending angle 180 °. Largest profile 60x60x6. Max bending radius at the center of the TUBE: CLR 350 mm. Max bending radius at the center of the PROFILE: CLR 300 mm. Working mandrel range 3600 mm. Weight 2500kg. Dimensions: 4700x1200x1200 mm. Power consumption: 15 kW.

Pipe bending machine Model: SW50, in good working order, manufactured by ZHANGJIAGAG HUAFANG MACHINERY. Maximum bending capacity 50 × 2 mm Bend radius 38~200mm Center distance of two arms 190 ~ 1600mm Bend Angle 0~185° Bending accuracy ±0.2° Main engine power 7.5 kW Hydraulic pressure in the system 12 MPa Year of release: 2019 Year of commissioning: 2019 Year of decommissioning: 2023 Dimensions: 2700mm(length)x1000mm(width)x1500mm(height) Weight: 1500 kg

Machine Type: 3-Roll Round Bending Machine Manufacturer: AKYAPAK Type: ASMY140x2100 Year of construction: 2005 Condition: used / good Offer will only be sent if a complete imprint is provided! Location Warstein , Germany Reference MV-KÖL-0424-4 DESCRIPTION We offer you a used round bending machine from the manufacturer AKYAPAC. Roller diameter 140mm Bending length 2100mm Sheet thickness 4mm further data on request. Availability: by arrangement Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 126200 € : 2511.38 € : 3100 mm : 25 mm : 25 mm : 20 mm : 20 mm : 20 mm : 16 mm : 360 mm : 360 mm : 270 mm : 60 mm : 1510 mm : 22 kW : 5560 mm : 2060 mm : 2050 mm : 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solu ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 58900 € : 1183.89 € : 2050 mm : 13 mm : 10 mm : 13 mm : 10 mm : 10 mm : 8 mm : 240 mm : 240 mm : 190 mm : 820 mm : 11 kW : 3830 mm : 1160 mm : 1200 mm : 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 66200 € : 1330.62 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls ar ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 78900 € : 1585.89 € : 2550 mm : 15 mm : 15 mm : 13 mm : 12 mm : 12 mm : 10 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 4760 mm : 1660 mm : 1155 mm : 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll le ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92800 € : 1865.28 € : 3100 mm : 16 mm : 16 mm : 13 mm : 16 mm : 14 mm : 12 mm : 300 mm : 300 mm : 240 mm : 50 mm : 1140 mm : 18.5 kW : 5310 mm : 1660 mm : 1140 mm : 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software sol ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 89400 € : 1796.94 € : 3100 mm : 13 mm : 12 mm : 8 mm : 13 mm : 10 mm : 10 mm : 8 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 5310 mm : 1660 mm : 1590 mm : 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software ...

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder

Bending length: 1070 mm Bending capacity: 3.0 mm Reel diameter: 95 mm Roller speed: 9 RPM Engine power: 1,1 kW Weight: 370 kg Dimensions: 1350 x 760 x 1250 mm

Max bending length: 1020 mm Max. sheet metal rod: 2 mm steel motor upper cheek adjustment via foot switch manual rear stop diverse bending rails

Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßer CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßerb CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Mot. - Ring - Bow - Bending machine Offer number: 15252 Make: KNUTH Type: MSB 30 Machine No: 121217 Built: 2000 Technical data: - horizontal working position - 2 mot. driven rollers - manual vertical delivery of the upper roller - Lifting top roller up to 30 mm - Shaft diameter 40 mm - Wave length 35 mm - Wave rotation 12 rpm - Roll diameter 76 - 88 mm - Drive 400 V 1.1 kW - Bending power approx. - Round tube 30 x 1.5 mm - Flat steel 30 x 10 mm - E - foot button for right / left - run - Round tube roller set approx. 23 mm - Weight approx. 150 kg - Space requirement approx. W 700 x H 1150 x D 650 mm

Key data: 188 , 3100 , 4

Sheet thickness: 188,00 mm Bending length: 3100 mm Number of rolls: 4   Without side support Conical bending attachment Oil cooler Separate hydraulic power unit Central lubrication Rolling width:                 3.000mm Rolling thickness 3x toproll Ø:34mm Rolling thickness 5x toproll Ø:38mm Rolling thickness prebending:  32mm Top Roll Ø:                    460mm Bottom Roll Ø:                 440mm Side roll Ø:                   330mm Number of rolls:               380 Rolling speed:                 2 + 4 m/min Adjustiment lower roll:        0 - 200 mm/min. Adjustm ...

OSTAS ROUND BENDING MACHINE TYPE SBM 1070 x 95 -Capacity of 1050 x 3 mm -Electrically adjustable rear role -Digital display fur back role -Hardened rolls -Conical bending -Swing top roller -Safety device for emergency stop cord -Documentation -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS ROUND BENDING MACHINE TYPE ORM 1070 x 130 -Capacity 1070 x 7 mm -Conical bending -Swing top roller -Safety device for emergency stop cord -Documentation -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Sheet thickness: 8,00 mm Bending length: 1000 mm Number of rolls: 3   2 driven rolls Hydraulic tilting lateral roll Rolls on ball bearing Smallest bending diameter ca 165 mm Rolling width:                 1.000mm Rolling thickness 3x toproll Ø:7mm Rolling thickness 5x toproll Ø:8mm Rolling thickness prebending:  6mm Top Roll Ø:                    135mm Side roll Ø:                   135mm Number of rolls:               3 Rolling speed:                 5m/min Adjustment side rolls:         100mm Number of driven rolls:        2 Power:                ...

- Pipe diameter 6 - 28 mm - Wall thickness max. 2 mm - Bending radius 2 x D - Bending angle max. 190 - without tools

Karl Hertel Bending Bench / Round Bending Machine Kombi - Width: 150cm - Depth: 90cm - Height: 120cm - Weight: 350kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Sheet thickness: 65,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id    5337 MAKE         Roundo Sweden TYPE           PAS 650 YOP             1991 SPECIFICATIONS Hydraulic / Mechanical        Hydraulic          3 or 4 roll       4 roll Maximum sheet thickness       65 mm Bending length       3000 mm Max. Rolling capacity Ø 2.500       60 mm Max. Prebending capacity Ø 2.500        50 mm Top Roll Ø       650 mm Bottom Roll Ø     650 mm Side Rolls Ø      530 mm Working speed M/Min.    5 M/min. DIMENSIONS Length       7000 ...

Sheet thickness: 10,00 mm Bending length: 2000 mm Number of rolls: 4   MACH-id     5331 MAKE          AKYAPAK TYPE             AHS / 4 YOP                2008 SPECIFICATIONS Control       Conventionel Hydraulic / Mechanical        Hydraulic 3 or 4 roll        4 roll Maximum sheet thickness         10 mm Bending length        2100 mm Max. Rolling capacity Ø 2.500         10 mm Max. Prebending capacity Ø 2.500     8 mm Top Roll Ø       210 mm Bottom Roll Ø      190 mm Side Rolls Ø         170 mm Working speed M/Min.4 M/min. DIMENSIONS  ...

Sheet thickness: 3,00 mm Bending length: 1050 mm Number of rolls: 2   MACH-id    5315 MAKE         Faccin Italia TYPE           HCU 1050 x 3 YOP             2008 SPECIFICATIONS Controll          Manuel Hydraulic / Mechanical         Hydraulic 3 or 4 roll       2 roll Maximum sheet thickness            3 mm Bending length        1050 mm Top Roll Ø        100 mm Bottom Roll Ø       300 mm Working speed M/Min.         7 M/min. DIMENSIONS Length        2600 mm Width          1250 mm Height         1900 mm  ...

Sheet thickness: 12,00 mm Bending length: 1500 mm Number of rolls: 4   MACH-id    5219 MAKE         Haeusler Swiss TYPE           VRM HY 1500 x 12 / 10 YOP              2002 SPECIFICATIONS Control         Conventionel Hydraulic / Mechanical      hydraulic 3 or 4 roll       4 roll Maximum sheet thickness        12 mm Bending length          1500 mm Max. Rolling capacity Ø 2.500       12 mm Max. Prebending capacity Ø 2.500        10 mm Top Roll Ø      220 mm Bottom Roll Ø     220 mm Side Rolls Ø       200 mm Working speed M/Min.4  M/min. DIMENSIONS Lengt ...