We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 106-448)
used
Working width 2000 mm, depth stop approx. 500 mm, YOC 84 Control
used
Description: The Adira PA16030 is an unused press brake with a 1600 kN capacity and 3000 mm working length. Control Control System: CYB Touch 8 Numerical Control: Cybelec VisiPAC Working Parameters Condition: New/Unused Capacity: 1600 kN Working Length: 3000 mm Distance Between Housings: 2550 mm Max Stroke: 260 mm Max Open Height Without Tools: 500 mm Throat Depth: 400 mm Motor and Power Motor Power: 15 kW Speed Approach Speed: 150 mm/s Working Speed: 10 mm/s Returns Speed: 150 mm/s Speed X: 800 mm/s Speed R: 200 mm/s Speed Z-Z1/Z2: 1200 mm/s Speed X1: 100 mm/s Axis Travel Stroke X: 625 mm Stroke R: 200 mm Stroke Z-Z1/Z2: 90 to 2150 mm Stroke X1: +/- 100 mm Dimensions Length: 3760 mm Width: 1840 mm Height: 2910 mm Transportation Height: 2710 mm Weight Weight: 7900 kg Extra Equipment Table: 13 mm for Wila type Dies 'Table Kit III' Back Gauge: Z1/Z2 Front Support Arms: 2 arm ...
used
Offer 23339 Specifications: -.max. Working length 2550 mm - Column passage 2050 mm -.max. Press force 63 t - Table width 125 mm - Projection 450 mm - Max. stroke 100 mm -.max. Installation height 310 mm - Table height 900 mm - Drive power approx. 5.5 kW - Space requirement approx. W 3300 x H 2100 x D 1400 mm - Weight approx. 4.9 t - with: - man. Back gauge - Separate control panel with foot switch - split sharpening tool + universal die
used
Control Amada Pressing force ... 100t Bending length... 3000mm controlled axes ... 7 Drive... Hydraulic The machine is in good condition, possible to test under power.
used
CNC press brake make AMADA type APX 50.20Ser. -No: APX 50.20 A31213, built in 1993Technical specifications:max.pressing force: 50 tWorking length: 2085 mmPassage between the uprights: 1520 mmStroke: 100 mmThroat: 400 mmTable height: 950 mmOpening width: 370 mmWorking speed: 9 mm / sDelivery speed: 73 mm / sOpening speed: 85 mm / sExternal dimensions approx .: 2600 x 2250 x 2100 mmWeight approx: 3000 kgWith- a complete set of tools- Operator control- Two-hand operation- foot switch- Control defectiveusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
sheet width: 3050 mmplate thickness: 12 mm: 1000 mm0: 16 St.machine weight ab.: 7.260 kgdimensions: 3560 x 1820 x 1960 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 170 tchamfer lenght: 3170 mmdistance between columns: mmstroke: 200 mmtable width: 180 mmwork height max.: 960 mmControl: total power requirement: kWweight of the machine ca.: 11,60 tdimensions of the machine ca.: m• controlled axes: Y1, Y2, X, R, Z1, Z2• 2 support arms can be moved• Fissler safety laser light barrier• Very large tool package consisting of:Sub toolsV35 / 30° length = 3200mmV20/V14 length = 3x835mmV25 length = 4x835mm + 1x415mmV40 length = 835,835,620,420,150,50mmV8/V12. Length = 835, 800, 600, 250mmV20/30° length = 4 x 835mmAdapter 60mm > slot 13 length = 3 x 1040mmUpper toolsStraight H130, R 1.5 length = 3300mmHeavily offset H 200, R 0.8 length = 2800mm, segmentedSlightly offset H70, R 0.8 length = 3100mm, segmentedSlightly offset H70, R 5.0 length = 2920mmSlightly offset H70, R 3.0 length = 3500mmAnd much more !The data for this ad was created w ...
used
Key data: 170 t, 3110 mm
Inv. Num. : 7140 Type: HG 1703 Producer: Amada Created: 2022 Parameters: Control system: AMADA AMNC 3i Duty cycle: 6664 h Hours: 5511 h Number of strokes: 450794 Compressive force: 170 t Maximum bending length: 3110 mm Maximum ram stroke: 250 mm Maximum lifting speed: 220 mm/s Maximum bending speed: 20 mm/s Maximum retraction speed: 250 mm/s Total power requirement: 30 kW Machine weight: 15000 kg Equipment: 5-axis backgauge Footswitch with panic stop function Angle Measuring System Digipro Safety device AKAS III Wila tenses Handwheel
used
offer 22499 Specifications: -.max. Working length 3100 mm - Stand passage 2600 mm -.max. Pressing force 100 t - Projection 400 mm - stroke 100 mm -.max. Installation height 370 mm - Table height approx. 960 mm - Delivery speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 11 kW - Space requirement approx. W 3500 x H 2300 x D 1950 mm - Weight approx. 8.0 t - with: - 3 axis CNC control CYBELEC - - CNC – Backgauge 0 - 600 mm - split sharpening tool - split V matrices - Support arms
used
Description: bending length: 4050 mm pressing force: 2040 KN max. Stroke: 220 control unit: CYBELEC DNC 700 approx. dimensions: 4500 x 1950 x 3400 mm approx. weight: 14500 kg serial number: 156, bending length: 4,050 mm, weight approx.: 14,500 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 1,950 x 3,400 mm
used
Compressive force: 135 t Working width: 4100 mm Clear stand width: 3150 mm Stand projection: 250 mm max. installation height: 310 mm Working speed: 7 mm/sec Return stroke speed: 50 mm/sec electr. Connection: 400 V, 11 kW Bcyhrjh9qri Weight: 10.8 t Space requirements: 4250 x 1800 x 2400 mm
used
pressure: 200 tchamfer lenght: 3660 mmdistance between columns: mmControl: total power requirement: kWweight of the machine ca.: 13,50 tdimensions of the machine ca.: m• 2 stop fingers, can be moved laterally• Block die with: V75, V50, V40, V25, V20, V10(V50 and V25 defective at approx. 10cm in the middle)• Straight punch, height 200mm, length 3000mm, segmented• ATL 500 control for immersion depth (Y) and back gauge (X)• Centrally adjustable crowning• 2 support arms• Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Offer 24027 Specifications: - Printing capacity 135 t - Working width 3100 mm - Passage between uprights 2600 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Feed speed 70 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Plunger stroke 120 mm - Fixed stop adjustment range 120 mm - Drive 400 V / 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3300 x H 2300 x D 1600 mm - Weight approx. 7500 kg - With: - Swivel arm control panel with LC actual value display - for adjusting the pressing depth + pressing pressure + back gauge - Motorized backgauge - 4-fold universal die + sharpening tool + deer foot tool - Two-hand control panel with foot switch - Support arms
used
pressure: 180 tchamfer lenght: 4100 mmdistance between columns: 3150 mmstroke - stepless adjustable: 200 mmcolumn arm: 300 mmtable height: 1090 mmdayligth: 450 mmworking feed: 9,0 mm/secreturn speed: 80,0 mm/secControl: NC ATL 550 hydraulic: 235 barvoltage: 380 Vtotal power requirement: 15,0 kWweight: 14200 kgrange L-W-H: 4400 x 1900 x 3000 mmFurnishing:- NC controlled hydraulic press brake with torsion shaft- ATLANTIC NC control ATL 550 Positioning of backgauge ( X ) Depth setting positioning ( Y1+Y2 ) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, front left- electric back gauge with 2 stop fingers, manually adjustable on ball screws- manual table crowning, with analogue display- divided deer foot upper tool 85°- divided MultiV - universal matrix block- rear protection- free-moving 2-hand / double-foot oper ...
used
pressure: 200 tchamfer lenght: 4100 mmdistance between columns: 3150 mmstroke - stepless adjustable: 200 mmcolumn arm: 300 mmtable height: 1090 mmdayligth: 450 mmworking feed: 9,0 mm/secreturn speed: 80,0 mm/secControl: NC ATL 550 hydraulic: 265 barvoltage: 380 Vtotal power requirement: 18,7 kWweight: 15000 kgrange L-W-H: 4400 x 1900 x 3000 mmFurnishing:- NC controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control ATL 550 Positioning of backgauge ( X ) Depth setting positioning ( Y1+Y2 ) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, front left- electric backgauge, on ball screws with 2 stop fingers, manually adjustable- manual table crowning, with analogue display Adjustment at the front left, with a hand crank- divided deer foot upper tool 85°- reversible MultiV - universal die block- ...
new
AYEL-TECH PRESS BRAKE/WORKSHOP PRESS KBWP type 1050 x 100 ton -Capaciteit 1050 x 100 ton -Max Queen 1050 mm -Geeredschap -Pressure gauge -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
pressure: 180 tchamfer lenght: 3700 mmdistance between columns: 3250 mmthroat: 270 mmstroke: 220 mmajustment speed: 80,0 mm/secworking feed: 10,0 mm/secreturn speed: 58,0 mm/secdayligth: 395 mmtable width: 200 mmwork height max.: 870 mmoil volume: 210 ltr.total power requirement: 15,0 kWweight of the machine ca.: 12100 kg.range L-W-H: 4200 x 1470 x 2550 mm from a maintenance workshop ()Furnishing:- conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electric back gauge, with ball screws (X axis) with 2x manually adjustable stop fingers Fine adjustment via handwheel at the front, with analogue position display- electro-motor adjustment of the immersion depth (Y1+Y2 axis) with digital position display- swiveling operation, mounting side on the left- 1x set of upper tools / additional divided tools- 1x rotating Multi V universal matrix block- 2x ...
new
pressure: 60 tchamfer lenght: 2100 mmdistance between columns: 1600 mmControl: DELEM DA 66T table width: 60 mmtable height over floor: 860 mmdayligth: 475 mmpiston stroke: max. 210 mm: 150 mm/s: 10 mm/sreturn speed: 130 mm/sec: 1000 mmmachine weight ab.: 5200 kgdimensions: 2100 x 1540 x 2350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 90 tchamfer lenght: 2600 mmdistance between columns: 2050 mmControl: DELEM DA 66T table width: 60 mmtable height over floor: 860 mmdayligth: 530 mmpiston stroke: 260 mm: 150 mm/s: 10 mm/sreturn speed: 130 mm/s: 1000 mmmachine weight ab.: 7100 kgdimensions: 3320 x 2220 x 2600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2550 mmControl: DELEM DA 66T table width: 90 mmtable height over floor: 880 mmdayligth: 530 mmpiston stroke: 260 mm: 150 mm/s: 10 mm/sreturn speed: 130 mm/sec: 1000 mm: 160 mmmachine weight ab.: 11500 kgdimensions: 3820 x 1800 x 2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 240 tchamfer lenght: 3100 mmdistance between columns: 2550 mmControl: DELEM DA 66T table width: 90 mmtable height over floor: 880 mmdayligth: 530 mmpiston stroke: 260 mm: 130 mm/s: 10 mm/sreturn speed: 120 mm/sec: 1000 mm: 160 mmmachine weight ab.: 12500 kgdimensions: 4100 x 1800 x 2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: SPECIFICATIONS Brand: Baykal Type: APHS 4109 x 220 Hydraulic Capacity: 220 T Bending length: 4,100 mm Stroke: 260 mm Electric stop weight approx.: 16,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 1,800 x 2,800 mm
used
pressure: 40,0 tchamfer lenght: 1600 mmdistance between columns: 1200 mmcolumn arm: 200 mmram stroke speed: 60,0 mm/secreturn speed: 8,0 mm/secwork speed: 60,0 mm/secwork stroke: 100 mmtable height: 760 mmtable width: 150 mmoil volume: 130 ltr.voltage: 400 VoltControl: NC total power requirement: 4,0 kWweight: 3030 kgrange L-W-H: 2050 x 1800 x 2030 mm Exhibition machine - like NEW ()Furnishing:- compact hydraulic press brake- BERNARDO NC control model E21- swiveling control panel- electrical adjustment of the backgauge- Back stop on recirculating ball spindles- electrical adjustment of the immersion depth- Laser protection device in front- Upper deer foot tool - divided- Tool holder with quick change system- Universal die block- side + rear protective device- 2x front support arms- movable double foot switch (operation)The data for this ad was created with ModulMWS - the software solutio ...
used
Description: - Operating voltage: 3 X 380 V - Frequency: 50 HZ - Rated current: 21 A - Sheet passage: approx. 2000 m - with electrically adjustable stop - Pressing force: Presumably 100 tonnes - Attention: The press brake tools on the machine are not included in the scope of delivery. However, the accessories on the pallet are included in the scope of sale.serial number: 591 06 3165, bending length: 3,100 mm, control: Swissax Euro III, weight approx.: 7,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 2,500 mm
used
CNC press brake make BEYELER type MZ 30 / 1550Machine -No: 59009 / 2817 built in 1990Technical specifications:Press force: 30 tBending length: 1550 mmDistance between columns: 1400 mmTable width: 80 mmStand projection: 205 mmInstallation height: 340 mmTable height: 890 mmInfeed speed: 130 mm/sec.Working speed: 11 mm/sec.Stroke:140mmDimensions L x W x H: 2150 x 1250 x 1750 mmTotal power requirement: 3.0 kWWeight approx.: 1.7 tWith- Defective control Euro II- cpl. upper and lower toolused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
pressure: 100 tchamfer lenght: 2050 mmdistance between columns: mmstroke: 415 mmdayligth: 550 mmworking flow: 10 mm/sControl: total power requirement: 7,50 kWweight of the machine ca.: 7,50 tdimensions of the machine ca.: 3,00 x 2,30 x 3,20 m• Control CYBELEC ModEva 12S• Controlled axes: Y1, Y2, X, X1, R, Z1, Z2• CNC controlled crowning• Fiessler light barrier at the front• Hydraulic tool clamping RFA above + below• Tool package:Stamp P4 RFA Radius 3 mm 88° Height 175 mm: 1720mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Number of axes 5 Pressing force kN 1500 Working length mm 3100 stroke mm 215 Operation mm/s 10 Rapid traverse to mm/s 150 Rapid traverse from mm/s 190 Power main engine kW 11 Total connected load kW 15 Operating voltage 400V / 50 Hz Control voltage 24V Control Cybelec ModEva 10S Safety Fiessler Light Barriers Accessories Various press brake tools Operational documentation
used
pressure: 060 tchamfer lenght: 2050 mmdistance between columns: mmnumber of strokes - stepless: compressed air: 8 barclosing speed: 200 mm/sectotal power requirement: kWweight of the machine ca.: 6,00 tdimensions of the machine ca.: 3,00 x 2,10 x 2,35 m• Controlled axes: Y1, Y2, X, R, Z1, Z2• Hydraulic tool clamping above + below• CNC controlled crowning• 2 support arms• 1 set of upper tools, length approx. 2200mm, R1, segmented• 1 die set V12/88°, length approx. 2000mm, segmentedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 75,0 tchamfer lenght: 2620 mmdistance between columns: 2055 mmcolumn arm: 400 mmajustment speed: 100 mm/secworking feed: 10,0 mm/secreturn speed: 90,0 mm/secstroke: ~ 140 mmdayligth: ~ 360 mmtable height: 930 mmtable width: 85,0 mmControl: ELGO P8822 oil volume: 150 ltr.engine output: 7,5 kWweight of the machine ca.: ~ 6.500 kg.range L-W-H: 3700 x 1800 x 2700 mmFurnishing:- electro-hydraulic conventional NC press brake- Swivel control front right, with ELGO P8822 control unit digital position indicator Entry of target/actual values possible- Electro-motor backgauge - X axis Travel = 700mm- electrical adjustment of the immersion depth - Y axes- with 2x manually adjustable stop fingers (R+Z axis)- Upper tool holder with upper wedge crowning - AMADA system- Lower tool holder - System AMADA- very many diverse / divided upper tools- rear guard (door)- lateral protective device (door ...
used
pressure: 160 tchamfer lenght: 3100 mm: 600 mm: 150 mmStroke: 200 mmdistance between columns: 2550 mmtable height: 925 mmoil volume: 260 lweight: 9800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 50 tchamfer lenght: 1600 mmstroke: 150 mmcontrol: CYBELEC DNC 880S total power requirement: 5,5 kWweight of the machine ca.: 4800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 320 tchamfer lenght: 4100 mm: 600 : 250 : 2900 mmStroke: 265 mmthroat: 400 mmdistance between columns: 3750 mmdayligth: 550 mmtable width: 60 mmoil volume: 600 lweight: 29.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Universal folding machine Serial number 350 Useful length: 2050 mm Maximum thickness: 3 mm Plate strength: 40-45 kg/mm2 Minimum inner radius: 1.5 mm x thickness Maximum vertical travel: 100 mmweight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 3,300 x 1,000 x 1,600 mm
used
pressure: 140 tchamfer lenght: 3000 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 2010012Type of machine PressbrakeMake COLLYType 3000/140Build in nbChamfer lenght 3000 mmPressure 140 tonStroke 250 mmThroat 310 mmDaylight 520 mm Additional informationincl. 1 set of toolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hydraulic Press Brake make Colly Type PS 125/3 Year of construction 1991 Technical specifications: Max. Pressure capacity 125 t Work length 3100 mm Through 2550 mm Stroke 250 mm Drive power 9.0 kWwith - Tools - CNC Control Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
DA ABKANTPRESSE TYP 1600 x 30 Sound -Capaciteit 1600 x 30 sound -Estun E21 besturing -2 hydraulic cilinders -Voetbediening -Fotocelbeveiliging -Noodstop -Documentatie -400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)
used
CNC press brake make DARLEY type EHP 110 31/25Year of construction 1990Press force: 110 tWorking length: 3100 mmPassage between the uprights: 2550 mmStroke length: 150 mmLowering speed: 100 mm / sec.Max. Press speed: 8.0 mm / sec.Retraction speed: 65 mm / sec.Drive power: 7.5 kWWeight approx: 8700 kgOutside dimensions approx: 3220 x 1290 x 2440 mmWith- CNC control Delem DA 22- Bombing device- universal die- Split goat foot tool- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Description: SPECIFICATIONS Brand: Darley Type: EHP 150 Steering: Delem DA-65 Year of construction: 1988 Capacity: 150 T Bending length: 4,300 mm Features: Multi V + J-knife, Electric back gauge, Top drive Includes: Mounting supports, Various tools Machine size: 4,600 x 1,700 x 2,900 mm Note! special truck neededweight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 4,600 x 1,700 x 2,900 mm
used
Key data: 200 t, 3100 mm, 2550 mm
Darley EHP 200 Press Brake Manufacturer: Darley Type: EHP 200 31/25 Year of manufacture: 1990 Control System: Delem Technical Specifications Effective length: 3100 mm Capacity: 200 t Distance between columns: 2550 mm Main motor power: 15 kW Dimensions: approx. L 3.3 x W 1.7 x H 2.5 m Weight: approx. 9 t Accessories Documentation for the machine A set of tools
used
CNC press brake make DARLEY type EHP 200/43/37Year of construction 1989Max. Pressure force: 200 tMax. Working length: 4300 mmNumber of cylinders: 2Stroke: 225 mmPassage between the stands: 3700 mmlateral. Discharge: 300 mmLowering speed: 80 mm / secPress speed: 8.5 mm / secRetraction speed: 50 mm / secDrive power: 15 kWDimensions L x W x H: 4420 x 1680 x 2800 mmWeight approx: 18 tWith- CNC control DELEM DA 42- 2 axes controlled X, Y- shared universal die- to U-rail- Sharp pointed tool- Rehfoot tool shared- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
CNC press brake make DARLEY type EHP 50-25 / 20Machine -No: 12940 Year 1988Max. Press force: 50 tNumber of cylinders: 2Working length: 2550 mmPassage between the uprights: 2050 mmlateral. Discharge: 250 mmTable width: 100 mmLowering speed: 100 mm / sec.Working speed: 13.5 mm / sec.Retraction speed: 75 mm / sec.Drive power: 5.5 kWWeight approx: 3.6 tOutside dimensions approx: 2750 x 1100 x 2050 mmWith- 1 cpl. upper tool- 1 cpl. lower tool- hydr. Clamping the upper tool- CNC control DELEM DA 42 X / Y- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
pressure: 320 tchamfer lenght: 3200 mmdistance between columns: 2740 mmstroke: 400 mmCenter of spindle to wall or column: 420 mmdayligth: 650 mmengine output: 32,5 kWoil volume: 350 lControl: total power requirement: kWweight of the machine ca.: 20 tdimensions of the machine ca.: 4,75 x 2,80 x 3,60 mOnly 5406.9 operating hours read• Delem DA-65W control• LazerSafe light barrier• Controlled axes: Y1, Y2, X, X1 (oblique), Z1, Z2• 2 x support arms with parking position on the side• CNC controlled crowning• Hydraulic tool clamping at top + bottom• Extensive tool set, with very large dies for machines / steel constructionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 220 tchamfer lenght: 4050 mmdistance between columns: 3550 mmthroat: 450 mmstroke: 350 mmdayligth: 600 mmajustment speed: 140 mm/secbending speed: 10 mm/secreturn speed: 130 mm/sectotal power requirement: 22 kWweight of the machine ca.: 12 t- upper tool, divided 4050 mm (new)- block tool 4050 mm: V16, V50, V20, V35 (new)- Pneumatic tool clamping above- CNC controlled crowning- controlled axes: Y1, Y2, X, X1, R, Z1, Z2- Support arms movable on linear guide and height adjustable- Fiessler photocell- Stmer ESA S560 TouchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 6443 Type: TECHNICA PLUS Producer: DERATECH Created: 2009 Parameters: Control system: Cybelec DNC 880 S Operating hours: 3040 h Compressive force: 250 t Maximum bending length: 4100 mm Total power requirement: 18.5 kW Machine weight: 18000 kg Equipment: Tools 2-axis backgauge
used
Key data: 12 t, 3050 mm
Hydraulic, up to 12mm, cutting length: 3050, weight: 15to, L-350, W-220, H-240cm
Hydraulic press brake Manufacturer: Durma Country of manufacture: Türkiye Year of manufacture: 2014 Control: CNC 4-axis Cybelec type Force: 600t Bending Length: 6050 mm Distance Between Columns: 5100 mm Stroke: 365 mm Daylight: 700 mm Throat Depth: 510 mm Table Height: 990 mm Table Width: 154 mm Working Speed Y Rapid Speed: 80 mm/sec Y Working Speed: 7 mm/sec Y Return Speed: 80 mm/sec Motor Power 45 kW Length: 760 mm Width: 2650 mm Height: 3850 mm If you are interested, don't hesitate to contact me. I will send the price, photos and additional information.
used
pressure: 160 tchamfer lenght: 3550 mmstroke: 200 mmquantity of oil: 150 lweight of the machine ca.: 11400 kgdimensions of the machine ca.: 4700x2100x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: tchamfer lenght: mmdistance between columns: mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: DurmaType: HAP 35200Capacity: 200 TBend length: 3.550 mmDistance between columns: 3.100 mmStroke: 185 mmMachine dimensions: 2.400 x 4.800 x 2.850 mm mmMachine weight: 13.300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
offer 22460 Specifications: - Printing capacity 120 t - Working width 2520 mm - Passage between stands 2150 mm - Table width 220 mm - Projection 240 mm - Installation height approx. 400 mm - Ram stroke 160 mm - Working height approx. 900 mm - Engine power approx. 11 kW - Oil filling approx. 120 l - Space requirement approx. W 2750 x H 2600 x D 1900 mm - Weight approx. 7000 kg - with: - Swivel arm – control panel - Digital displays for offset -Mot. Backgauge with display - Universal die, split sharpening tool - Two-hand control panel, foot switch, 2 support arms
used
Hydraulic press brake make EHT type APN 80Machine -No: 20377, built in 1970Max. Pressing pressure: 80 tTable length: 3550 mmTool length: 3550 mmDistance between the stands: 3050 mmStand projection: 250 mmRam stroke hydraulic: 100 mmPush stroke mechanical: 80 mmDrive power of the high-pressure pump: 11 kWDrive power of the gear motor: 0.75 kWPressure in the retraction system: 120 - 150 atüNitrogen loading in the accumulator: 80 atmContent of accumulator: 10 lContent of the oil tank: 280 lOil quality Hydraulic oil: 3 ° E at 50 ° COperating voltage three-phase: 380 volts, 50 HzControl voltage: 220 voltsDrive power: 12 kWWeight approx: 9550 kgExternal dimensions: 3565 x 1680 x 2700 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offe ...