bending machine used for sale

Electric roll Bending Machine Max Width: 1050 mm x Thickness: 2 mm 3 rolls: 1 fixed roll and 2 trainers rolls Rolls diameterØ 75 mm Rotation right/left Voltage: 380 V Dimensions (L x W x H): 1500 x 900 x 1300 mm Weight: approx 500 kg

one used MEP Format S stirup bending machine • Single strand processing wire diameter cold drawn, hot rolled, smooth or ribbed wire from Ø 6 to Ø 12 mm from #2 to #4 fy = 600 N/mm² • Double strand processing wire diameter cold drawn, hot rolled, smooth or ribbed wire from Ø 6 to Ø 10 mm from #2 to #3 fy = 600 N/mm² – ft = 700 N/mm²

Bending machine and core extractor. Guaranteed excellent condition and operation, also different types of rollers and cores. year 1994

Used BLM PR 35 D Tube bending machine with drilling units Year 1995 visible in Italy

This EHT VarioPress 225-30 Bending machine was manufactured in the year 1997 in the Netherlands.

This Schröder Fasti 145-18/075 Bending machine was manufactured in the year 2008 in Germany.

This Tauring Alfa 200 Tube Bending machine was manufactured in the year 2007 in Italy.

This AMADA HFT 50-20 Bending Machine was manufactured in 2009 in France. It has a maximum press force of 500 kN, a maximum stroke of 200 mm and a foreseen power of 6 kW. In total is weighs 4.7 tons. This press brake has operated 11,377 hours so far. Check photo gallery for more details. Contact us anytime for further questions!

This STAR-BEND STAR 800 CN6/GEN/L Bending machine was manufactured in the year 2006 in Italy. It is equipped with a STAR-BEND control unit and has 6 axis.

This JORDI PH6100 180 Bending machine was manufactured in the year 2003 in Spain. Contact us anytime for further questions.

Kramer Type A Swivel Bending Machine Toll III 2500 Effective length 2500mm Maximum sheet thickness 2.5mm

This TRUMPF TruBend Center 7030 Bending machine was manufactured in the year 2019 in Italy and has 901 production hours. Contact us anytime for further questions

This Durma AD-S 40320 Bending machine was manufactured in the year 2012 in Turkey and has 35040 working hours. It is equipped with a Cybelec ModEva 10S control unit. Contact us anytime for further questions.

Profile bending machine Ercolina Model TOP 030 - Three-phase 6 meters. With complete sets of rollers diam.20/25/30/35/35/35/43/50,8mm and 15/20/22mm hangers.

Used BLM DINAMO 0 Tube bending machine Visible in Italy Videos available 2002

Tube bending machine, with base PAGUS ROKABI ( tube cold bender ) tube diameter: approx. 25 - 61 mm motor: VEM ZG1 KMR71 G 4 0,75 kW 63 rpm 220 / 380 V 3AC 50 Hz IP44 with accessories used, tested ! Dimensions: 1200 x 830 x 1000 mm

Description: Tube Bending Machine weight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 700 x 1,300 mm

Description: TAURING ALFA 40 Bending Machine Approx. Onsite Dimension. (l x w x h): 1,200 x 1,000 x 1,700 mm, weight approx.: 250 kg

This OTINUS PBO 2312N Bending machines machine was manufactured in 2021. This equipment features the E21 control system with a backgauge along the X-axis and beam adjustment along the Y-axis. It operates with a nominal pressure of 1250 kN and can handle sheets up to 3200mm in length and 320mm in depth. It offers a working length of 3.2 meters and a pressing force of 120 tons. Contact us anytime for further information.

Description: Hand bending machine Flat iron 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Pack size max. 51 x 31 x 22 cm weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 510 x 310 x 220 mm

THREE ROLL BLECHBIEGEMASCH. m. conical bending and in turn, used three rollers bending m/c with conical and prebending, used Typ / type: UBBDA 32 x 2000 Manufacturer / make: heavy machinery Wildau Baujahr/ new: 1984 Workspace, sheet width max. / maximum working length: 2000-.2100 mm maximum sheet thickness maximum sheet width rounding (cold) / Max sheet thickness at max.working length at bending(cold): 32 mm (270 MPa) On bending (cold) /. at prebending(cold): 23 mm Smallest sheet metal thickness maximum sheet width /. min. sheet thickness at maximum working length: 4 mm Bending rolls / bending rollers: top: 1 piece, bottom: 2 PCs Driven / driven: 2 bottom rollers / bottom rollers upper roll diameter / diameter of top roller: 382 mm Under Roll diameter / diame ...

3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months.  ...

Hydraulic press brake, used Hydraulical press brake, used type / model: D 160-25 Make / make: GWF Year / year of make: 1993 Pressure / force: 160 t Bending length / working length: 3,050 mm Stand width approx. / distance b/n standards: 2.550 mm Table width: 220 mm Stand RADIUS / depth of Cap: 280 mm height / shut height: 440 mm working stroke ca / stroke. Max 250 mm Hubgeschw. / speed of stroke: down: down; 90 mm / s Press down 11 mm / s Expensed. / upward: 90 mm / s Machine weight / weight: approx. 13 t Power consumption / connected load: 22 kW Spec/specif.: 2-hand/foot control / 2 foot switch - manual

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

Working width: 1050 mm sheet thickness: 1.5 mm top rollers Ø: 70 mm bottom rollers Ø: 70 mm weight: 320 kg space requirement: 700 x 1300 x 1100 mm

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race

Roll length: 1250 mm max sheet thickness: 1.25 mm Roll diameter: 60 mm Length: 1780 mm Depth: 550 mm Height: 1030 mm Weight: approx. 230 kg

Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder

Working width: 1020 mm, sheet thickness: 1 mm top rollers diameter: 55 mm bottom rollers diameter: 55 mm space requirement: 1370 x 570 x 1100 mm

Bending length: 1070 mm Bending capacity: 3.0 mm Reel diameter: 95 mm Roller speed: 9 RPM Engine power: 1,1 kW Weight: 370 kg Dimensions: 1350 x 760 x 1250 mm

Outside diameter maximum: 42 mm Inside diameter maximum: 6 mm Pipe length maximum: 3000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm Tracto Technik - TUBOMAT 642 Tube bending center Ø 6 - 42mm bending / cutting / deburring / flairing MACH - ID 6326 Make: Tracto Technik Type: TUBOMAT 642 Max.Tube Ø    42 mm Min. Tube Ø     6 mm Max. Wall thickness       3 mm Max. Bending radius     180 mm Min. Bending radius      10 mm Max. bending length       3.000 mm Deburring attachment      Yes Sawing attachment          Yes Flair attachment               Yes Power                               1, ...

Outside diameter maximum: 50 mm Inside diameter maximum: 6 mm Pipe length maximum: 4500 mm Angle degrees maximum: 0 Wall Thickness: 3 mm Transfluid - DB 648K Tube bender Ø 50 x 4500 mm MACH - ID 6314 Make: Transfluid Type: DB 648K YOP: 1998 Max.Tube Ø   50 mm Min. Tube Ø    6 mm Max. Wall thickness     3 mm Max. Bending radius    125 mm Min. Bending radius     10 mm Max. bending length     4.500 mm Power      1,5 kW Number of tools      2 Dimensions Length      5.600 mm Width         800 mm Height     1.550 mm Weight     700 kg

Wire diameter range: 2.5 - 6.0 mm feed wheel: unbrittle feed speed: max. 36 mtr./min Bending angle: 0 - 340 ; ready for use

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5428 MAKE        ROUNDO KUMLA SWEDEN TYPE          r-6 / z-60 YOP            1993 SPECIFICATIONS Horizontal and vertical          H + V Shaft Ø      100 mm Number of rolls       3 Resistance moment         56 CM³ Capacity flat         125 X 20 mm Capacity Tube        115 X 6 Ø x mm Capacity HEA-Profile       240 mm Working speed         7 mm/min. Control         PS/R DIMENSIONS Length        2000 mm Width  ...

Outside diameter maximum: 42 mm Inside diameter maximum: 6 mm Pipe length maximum: 3000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5390 MAKE        Tracto Technik TYPE          TUBOMAT 642 YOP            2008 SPECIFICATIONS Max.Tube Ø        42 mm Min. Tube Ø        6 mm Max. Wall thickness         4 mm Max. Bending radius       84 mm Min. Bending radius        2 mm Bending length           3000 mm Deburring attachment          yes Sawing attachment          yes Flair attachment       yes Power                  ...

Equipment: 5 Sledge units 1 Two-point excenter press 70 kN working range: Drahstaerke range: max. 3.0 mm width: max. 40 mm feed load: max. 170 mm power: max. 250 rpm; ready to use

Max bending length: 1020 mm Max. sheet metal rod: 2 mm steel motor upper cheek adjustment via foot switch manual rear stop diverse bending rails

equipped with: 5 slide units 1 Eccentricpress 70 kN working range: wire diameter range: max. 3,0 mm strip metal width: max. 40 mm feeding length: max. 170 mm output: max. 250/min; ready for operation

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5001 MAKE         COMAC Italia TYPE           3055 YEAR          1990 SPECIFICATIONS Power       15 kW Horizontal / Vertical / or H + V        H + V Shaft Diameter ø     120 mm Roll diamter ø       400 mm Resistance moment Cm      333 Cm3 Capacity IPN      240 x 106 mm Capacity  HEB        120 x 114 mm Capacity Tube walltickness x Ø  139 x 5 mm Capacity Flatt         125 x 25 mm Hydraulic / Mechanical       Hydraulic Working speed M/Min.2.5 + 7.5  ...

Punching and forming center in chain with an assembly line for the production of relays, see pictures

Machine number: ST-R-1660 Buerstentgratmaschine for the deburring of metal sheets or plates Power supply: 380 V 50 Hz 1.0/1.4 kW 2 speeds: 1500-3000 rpm. Brush diameter: 250 mm

Outside diameter maximum: 105 mm Inside diameter maximum: 0 mm Pipe length maximum: 300 mm Angle degrees maximum: 0 Wall Thickness: 60 mm CNC Brand: _Unknown / Other MACH-id   4141 MAKE       PBT Swiss TYPE         25 YEAR       1999 - 635 uur SPECIFICATIONS Hydraulic / Mechanical         Hydraulic Horizontal / Vertical / or H + V        Horizontal Shaft Diameter ø    105 mm Shaft length            300 mm Working speed M/Min.        1 - 24 M/Min Capacity IPN          120 x 2000 mm Capacity HEB      140 x 3500 mm Capacity Tube walltickness x Ø    60 x 1000 mm Capacity Flatt        80 x 8 x 1000 mm Power  &n ...

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 2000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm CNC Brand: Elgo MACH-id   4106 MAKE       Stierli Bieger Swiss TYPE         300 CN C YEAR        2001 SPECIFICATIONS Controll     ELGO Hydraulic / Mechanical      Hydraulic Throat      300 mm Press force         30 Ton Stroke       2000 mm Table size Length x Width    1250 x 850 mm Working speed      600 Hour DIMENSIONS Length       2785 mm Width        1600 mm Height       1400 mm- ex. SIEMENS very littl ehours- incl. universal tool package- incl. hand opperator button- incl ...

Working width: 1040 mm sheet thickness: 1.25 mm sheet thickness in bending: top rollers diameter: 56 mm bottom rollers diameter: 56 mm weight: 190 kg space requirement: 1450 x 460 x 1030 mm

Technical data: -Bending performance mandrel bending -maximum Rohrdrm at 45 kg / mm² Ã? 60.3 x 3.2 mm -min tube diameter 20 mm -maximum bending angle 180 ° -Bending direction left + right -Modulus 7,8 cm³ -min. bending radius mid-tube 40 mm -maximum bending radius mid pipe 200 mm -Lift length 5000 mm -maximum bending speed infinitely adjustable up to 3 U/min -Drive 400 V / 4 kW -Space requirement approx. B 1400 x H 1500 X 8000 mm -Weight approx. 1200 kg -Automatic. Bending angle before eligibility - hand positioning adjustment, creep speed control

Technical data: -Working width 1030 mm -Material thickness 1.25 mm -Roll diameter 55 mm -Upper roller swing -Rear and front wave about eccentric adjustable -Rear and front wave each with a Groove to round -for sheet metal with wire inlay -Space requirement approx. B H 1350 x 1050 x D 750 mm -Weight approx. 150 kg