bending machine used for sale

Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls.

Working width: 2500mm, max. sheet thickness: 20mm, with optical display of roller adjustment, central lubrication, cone bending device and overrun brake.

There are two identical bending machines available, working width: 2000mm.

Working width: 3050mm, workpiece thickness: 3-15mm, connected load: 9.6kVA, length: 4986mm, width: 2000mm, height: 1670mm, weight: 2.7t, including documentation.

Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices.

Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm.

Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter.

Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024.

Bending capacity: 6-42mm, connected load: 4kW.

Max. pipe diameter: 42mm.

With digital display for roller adjustment, pressure roller supports electro-hydraulically adjustable from the mobile control panel, including digital displays, universal bending roller set, e.g. angle leg outside 100x100x10 to min.1400mm, the machine was never used.

Also suitable for processing flat steel, including documentation, without accessories, machine was scarcely used.

Number of rollers: 3, weight: 185kg.

Including documentation.

Single/ dual wire diameter: 6-16/ 6-12mm, max. bending speed: 1200°/s, connected load: 22kW, length: 4100mm, width: 1300mm, height: 1650mm, weight: 4.75t, with documentation.

Max. bending diameter: 30mm, an inspection is possible.

There are five identical machines available, an inspection is possible.

Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.

Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used.

Max tube diameter 76 mm Max thickness 3 mm Max bending degree 180 Bending radius max 260 mm

3 Axis CNC Electric Wire/Tube Bender Year of manufacture: 2010 Wire / tube capacity: Ø 4 to 16 mm / thickness 2 mm Driven axes: • C axis: bending stroke 195° - Repeatability 0.05° - speed 67 rpm • Y axis: tube linear feed stroke 790 mm - repeatability 0.05 mm - Speed 120 m/min • Axis B: tube orientation unlimited stroke - Repeatability 0.05 mm - Speed 60 rpm Other movements: • Tightening: tube, jaws, ruler • Accompaniment ruler • Collet clamping • Head horizontal movement SIEMENS-CNC

Bending length 8200 mm Bending depth 1500 mm bending capacity 2 mm autom. depth stop: 8 - 1500 mm max. Opening width of the upper beam: 200 mm Adjustment range of upper beam: 6 mm Bending angle 0-140 Weight: approx.7000 kg Control: Duscher Controlling Machine outside dimensions: 9350 x 2300 x 1950 mm

Offer 24031 Specifications: - Manual operation + CNC controlled operation - Max. working width 1040 mm - max. material thickness at 40 kg strength per mm² 4.00 mm - Upper roll diameter 100 mm - Rear roller diameter 100 mm - Upper roller can be swung out - Asymmetrical roller arrangement - Rear roller can be tilted for conical round - Lower roller + rear roller with wire groove - Upper + rear rolling mot. driven - Working speed 5.5 m/min - Swivel control panel with CNC control - E-foot switch - Drive 400 V / 1.10 kW - Space requirement approx. W 2000 x H 1250 x D 850 mm - Weight approx. 850 kg -Operating instructions

max. tube Ø: 6 - 48.3 mm Max. bending angle: 0 - 360° electr. Connection: 400 V, 1.8 kW Dimensions: 4200 x 1300 x 700 mm Weight: approx. 300 kg

Key data: 3550 mm

Ref.-No.00804 Description Hydraulic Press Brake Tools included Manufacturer: EHT Type EHT VarioPress 320 Year of construction 1997 1997 Pressure infinitely adjustable: 3200 kN 320 tons max. working width: 3550 mm 3550mm Working width between uprights: 3050 mm Stand projection: 350 mm Table height: 900 mm Plunger stroke: 270 mm Plunger bevel adjustment: 15 mm With crowning device and quick-clamping device for upper tools Lifting speed: empty 100 mm/s, under load: 10 mm/s, retraction: 100 mm/s Control: DNC 80 PC ( DNC 84 PS= 4 axes

The machine is in very good technical condition, approx. 60-80 engine hours worked, inspection possible by agreement. Technical data: Sheet thickness without pre-bending - 6mm Working length - 3100mm Diameter of the upper cylinder - 200mm Diameter of the side cylinder - 190mm Motor power - 4kW Description: The side cylinders can be tilted from the control panel Hydraulic motors are located directly on the cylinders without transmission The cylinders are hardened and ground The machine is adapted for conical bending The smallest rounded diameter is equal to 1.1 times the upper cylinder

Type: A89 TNCB Parameters: Manufacturer: CSM Taiwan Year of production / SO / GO: 2014 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Main parameters: Max bending angle 180 °. Largest profile 60x60x6. Max bending radius at the center of the TUBE: CLR 350 mm. Max bending radius at the center of the PROFILE: CLR 300 mm. Working mandrel range 3600 mm. Weight 2500kg. Dimensions: 4700x1200x1200 mm. Power consumption: 15 kW.

The machine is in good technical condition. Number of pulleys: 3 pcs Standard pulley diameter: 150 mm Shaft diameter: 45 mm Spacing of side shafts: 250-610 mm Base size: 883 x 625 mm Working height: 966 mm Dimensions L x W x H: 860 x 955 x 1250 mm Weight: 440 kg By prior arrangement, the possibility of a tour in progress.

Type: DOROBEND DOB 32/90 Manufacturer: VEENEX v.o.f., The Netherlands Year of production: 2000 Location: Czech Republic Description: The machine is in good technical condition. Number of tubes bent at one stroke at a time: TR 32x2 mm: 1 TR 26x2 mm: 2 TR 22 x 1.5 mm: 3 TR 18 x 1.5 mm: 4 Bending Head Distance Range: 220-2000mm Possibility to operate 1 or 2 bending heads Power: 5.5 kW Connection voltage: 3 x 380 V, 50 Hz Bending unit drive: hydraulic Oil filling: 120 l Number of bending heads: 2 Hydraulic pressure for controlled deformation of bent material: yes, 2x Orientation bending radius: 3 x tube diameter Max. bending radius: 200 mm Min .. bending radius: 40 mm Max. bending angle: 100 ° Min. bend distance: 220 mm Max. bend distance: 2000 mm One cycle time (90 °, including backward movement): 5 sec. Machine dimensions: LxWxH: 2700 x 110 x 1400 mm Machine we ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6800 € : 140.76 € : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaft diameter 30 mm 2 driven shafts Clockwise and counterclockwise rotation Accessories see photo

Inv. Num. : 5648 Type: XOTM 60 Producer: UNIT Created: 2004 Parameters: Minimum tube diameter: 20 mm Maximum tube diameter: 60 mm Machine length: 4900 mm Machine weight: 130 kg

Inv. Num. : 5762 Type: XZPP 80/8 Producer: UNICORN-ESK Created: 2004 Parameters: Profile cross-section: 80 mm Maximum sheet thickness when rolling: 8 mm Total power requirement: 4 kW Standard pulley diameter: 250 mm Length: 1150 m Width: 1120 mm Height: 1365 mm Weight: 1900 kg

Inv. Num. : 1609 Type: CB90VZB SL 6000 Producer: DYNOBEND B.V. Created: 2013 Parameters: Control system: IGES Maximum tube diameter: 100 mm Maximum bending angle: 200 h Precise bending: 1/10 st Number of axles: 3 pieces Maximum bending length: 6300 mm Tube rotation: 360 pcs Strength: 70 kN Repeatability: 0.1 mm Programmable speed Compatible with systems: Windows. Novell and Linux Process Planning Software 3D bends Tools for bending pipes with a diameter of 76 and 70 mm

Inv. Num. : 3168 Type: SE 80.3 Producer: RASI Created: 2003 Parameters: Minimum tube diameter: 4 mm Maximum tube diameter: 82 x 2.6 mm Minimum bending radius: 34 mm Maximum bending radius: 228 mm Maximum bending angle: 195 h Total power requirement: 11 kW Maximum bending length: 3-6 m Maximum resistance torque: 12.7 cm³ Operating voltage: 400 V Control voltage: 24 V Feed speed: 0-60 m/min Machine height: 1200 mm Machine length: 7000 mm Machine width: 1300 mm Equipment: Bending tools

Inv. Num. : 5262 Type: XOTH 40 Producer: Unicorn Generated: Parameters: Maximum tube diameter: 40 mm Maximum pipe wall thickness: 2 mm Total power requirement: 4.6 kW Machine height: 1120 mm Machine length: 4450 mm Machine width: 800 mm Machine weight: 1100 kg

Inv. Num. : 5263 Type: DB 642 ST Producer: Transfluid Created: 1999 Parameters: Minimum tube diameter: 6 mm Maximum tube diameter: 42 mm Maximum bending angle: 190 h Machine height: 1150 mm Machine length: 4000 mm Machine width: 650 mm

plate width: 1,500 mm, number of rolls: 3, weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 800 x 1,300 mm

: neu : ca. 12 Wochen ab Auftrags : Türkei : 23000 € : 471.5 € : 1550 mm : 4.5 mm : 4.5 mm : 3.5 mm : 4.5 mm : 3.5 mm : 3.5 mm : 2.5 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3300 mm : 1150 mm : 1110 mm : 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Metal sheet thickness max. 3 mm serial number: 701,130, bending length: 1,500 mm, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,100 x 1,600 mm

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40500 € : 822.15 € : 2050 mm : 8 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3790 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 45900 € : 931.77 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % o ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 19600 € : 401.8 € : 1530 mm : 6 mm : 6 mm : 4 mm : 150 mm : 4 kW : 3100 mm : 1120 mm : 1020 mm : 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

One used good as new SCHNELL AUTOMATIC BAR SHAPING MACHINE BAR WISER 28 Bi-directional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cut-to-size bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. Bar Wiser 28 bar shaping machine is equipped with: - Max. pulling speed: 180 m/min (600 ft/min) - 2 bending units (upper and lower) - Clamp for extraction of the end part of the bar - Virtual mandrel - Web teleassistance

- Working range pipe max. Ø 6 – 50 mm - Pipe extension length 3,000 mm - Electronic three-axis control - Incl. existing bending tool D20xR40/D40xR80/D40xR120/ D50xR110 - incl. prev. Mandrels 20x2 / 20x1 / 40x2 / 50x2 - Weight approx. 750 kg - L x W x H approx. 3,800 x 700 x 1,500 mm - Incl. instruction manual as PDF

- Round tube steel DM 6 – 42 x 5 mm - Round tube stainless steel DM 6 – 42 x 3 mm - Pipe push-on length max. 6,000 mm - Programmable logic controller up to 20 angles - Digital display of longitudinal displacement - Digital display of torsion - Programmable, anticipatory mandrel retraction - Mandrel lubrication system by hand pump - Wrinkle smoother receptacle - Bending speed max. 13°/sec - Bending angle up to 180° + 10° deflection - Manual feed - Manual twisting - Right bending direction - Radii from 1.5 D - Incl. bending tool : - DM 12 mm - radius 36 mm ) / DM 15 mm - radius 37.5 mm - DM 18 mm - radius 36 mm - DM 22 mm, radius 44 mm with mandrel - DM 42 mm, radius 44 mm with mandrel

Description: Serial number 16000, max. sheet thickness 1 mm, sheet width max. 2000 mm Approx. Onsite Dimension. (l x w x h): 2,500 x 800 x 1,100 mm, weight approx.: 650 kg

Description: Working width max. 1000 mm, on castors weight approx.: 180 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 900 x 1,300 mm

HYDROIL CHA 80 mandrel bender. This machine has been completely refurbished with change of all hydraulic pipes, pressure gauge, joints and screws + epoxy paint Description: - delivered with 15 complete sets of tools ranging from diameter 17.2mm to diameter 50mm, including certain diameters with 2 different radii (new market value of a single tool: €2,500) - hydraulic clamping vice - hydraulic tightening of the follower guide - hydraulic feedback from the mandrel at the end of bending to facilitate extraction of the tube - mandrel holder rod length 2 meters (so reduced bulk) - possibility of increasing the mast, therefore the working length - maximum capacity: diameter 50mm, thickness 2 mm in steel - maximum bending angle amplitude: 180° - rotation speed of the bending roller: 28°/sec. - torque available at maximum pressure: 654m daN - electric motor: 5.5HP, 1500 rpm - ...

sheet width: . mm plate thickness: . mm pre-bending: . : verstellbar weight of the machine ca.: 150 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.