bending machine used for sale

: neu : 2023 : 8305 : prompt, Zwischenverkauf v : Türkei : 5530 € : 114.47 € : 1 : 1050 mm : 1.5 mm : 1 mm : 2.2 mm : 150 ° : 500 mm : 200 mm : 1300 mm : 750 mm : 1515 mm : 280 kg : Verstellbereich 35 mm sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC adjustable angle gauge shelve and box for tools machine on rolls with brakes operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 35000 € : 710.5 € : 2550 mm : 1.5 mm : 1 mm : 2 mm : 155 ° : 110 mm : 0,75+1,1 kW : 3800 mm : 2100 mm : 1650 mm : 2500 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the ...

190° maximum 114.3x3.6mm/3.5 max. tube 30kw L1, L2, L3 + N +PE Dimensions: 10 x 1.7 x 1.8 m Weight: approx. 14 tons Oil: 400 liters of GALP HIDROLEP 46 type oil Various tools on request (1/2,3/4,1 and 2) Good condition

wire diameter range 0,5 -5,0 mm width of band max 70 mm feeding length max 320 mm output pieces/min max 132 number of slides 4

The machine is in working order and has many accessories Programmable up to 10 folds. dies up to 50 mm Matrices of: 20, 25, 30 and 50

Machine in good technical condition, after agreement possibility of testing. Weight 1530 kg.

Key data: 2040 mm, 6 mm

Specifications: Roll length 2040 mm Bending capacity 6 mm at 450 N/mm² Bending capacity approx. 80% of the bending capacity Upper roll diameter 170 mm Rear roll diameter 170 mm Lower roll diameter 165 mm

Capacity: 10 tons Includes: bend adapters Foot pedal operation

Shaft diameter: 45mm Top roller hydraulically adjustable 3 driven rollers Digital reading

New OSTAS profile roller Type OPK-45 Shaft diameter 50mm Hydraulic top roller adjustment Digital readout Can be used horizontally and vertically

The machine is in good technical condition, it is possible to test it by agreement. Parameters: Maximum pipe diameter: 40 mm Maximum pipe wall thickness: 2 mm Total power: 4.6 kW Machine height: 1120 mm Machine length: 4450 mm Machine width: 800 mm Machine weight: 1100 kg

Pipe cutting machine Length 2950mm. Width 1670mm. Height 2350mm. Control voltage 24VDC 230VAC. Rated current 32A. Total power 18kW. Weight 3000kg. Noise level 75dB.

The hydraulic profile bender PBH 80 is in good technical condition, including a wide range of accessories. Can be seen by appointment.

Machine weight: 20500 kg Max. bend length: 5000 (custom extended machine) mm Max. collet diameter: : 102 mm Max. bending capacity:: D 102, Rmax = 400 mm Min. bending inner radius:: 65 mm

Manufacturer LOIRE SAFE Model ESSC 300/ 30-20 / 20-15 Year 2003 Press Maximum adjustable force 300 a 3.000 kN Return force 600 kN Max opening between fixed table and chuck 2.000 mm. Mobile chuck travel 1.500 mm. Dimensions of the lower mobile table Fontal 3.000 mm. Lateral 2.000 mm. Dimensions of the mobile chuck Frontal 3.000 mm. Lateral 2.000 mm. Machine weight without tools or accessories 63.000 kg. Speeds Approaching speed, without pressure 60 mm/s Working speed, adjustable by potentiometer 1 a 7 mm/s Demoulding speed, adjustable by potentiometer 1 a 35 mm/s Return speed 60 mm/s Tooling Dimensions Frontal 3.000 mm. Lateral 2.000 mm. Height 1.500 mm. Max weight Mobile part 18.000 kg Total 42.000 kg Accessories Upper plate with tilt system INCLUDED Movable lower table with tilt system INCLUDED Stop time and safety distance Stop time 123 ms Safety  ...

Wire bender OMAS CEB 110 BV in excellent condition

Specifications: Workspace Tube ø, max.: 12.7 mm Standard lengths (recommended): up to 2000 mm From BMZ magazine: 100 - 2000 mm CNC axes Standard / Maximum: 7 / 10 Bending head: 3 axes Spindle unit (without swivel): 2 axes Lateral movement bending head: 1 axis Auxiliary gripper: Pneumatic Collet swivel: 1 axis Collet Mode of action: Pneumatic Design: Open at the sides Single stroke: 750 mm Multi-stroke: Any number of times Automation Loaded from Magazine: Standard Correct positioning: Standard Weight, approx.: 1950 kg Space requirement (LxWxH), approx.: 2150 x 1250 x 2050 mm all information depending on material and bending radius Accessories: - External start button when loading the machine manually for program start via supply cable - Foot switch for clamping function - Modular bending tool type 8 single-stage complete for a pipe diameter and a bending radi ...

The machine is fully functional, with a rich set of tools. Pipe bending tools: fi 83 - R300 fi 88.9 - R300 fi 101.6 - R250, R400 fi108 - R450 fi 114.3 - R550 fi 133 - R400 fi 137 - R500 fi 168 - R700 fi 193 - R600 fi 219 - R640, R800

This Bystronic Xpert 250/4100 Press Brake Machine was built in the year 2016 in Germany and has 17550 hours. The machine has a pressing force of 2500 kN.

This KOMAGE S 50 4E CNC Hydraulic Press was manufactured in the year 2017 in Germany by the Komage Gellner Maschinenfabrik KG. It has a pressing force of 500 kN. The machine is in a very condition as serviced on an annual basis directly by Komage. In total the press has worked for 23,379 production hours and 2,113,050 strokes.

This KOMAGE Mechanical Powder Press was manufactured in the year 1998 in Germany by the Komage Gellner Maschinenfabrik GmbH. It has a pressing force of 50 kN. The machine is in a good condition for its age as serviced on an annual basis directly by Komage.

Diameter Capacity 3-10 mm Bending arm lenght 755 mm

Salvagnini S4+P4-2420 Plate Bending and Punching Machine Specifications: Maximum length x width of incoming sheet: 2420 mm Minimum length x width of incoming sheet: 436 x 130 mm Maximum diagonal of incoming sheet: 2220 mm Maximum bending height: 203 mm Maximum material thickness: 2.0 mm Minimum material thickness: 0.5 mm Charging: automatic/manual Load capacity 5000 kg The Salvagnini S4 + P4 system are flexible lines for the production of panels from sheet metal packages. The punching, shearing and bending process is integrated to eliminate material handling. The S4+P4 system can also be operated as separate work cells. The intrinsic flexibility of the individual S4 and P4 systems extends to the hole line. Efficient production: The production process from raw material to finished panel takes place on a single processing line. This offers concrete savings in terms of pro ...

diameter range 7,75 mm cutting length 360 mm number of slides 2 punching power 80 to width of band max. 80 mm

: neu : ca. 8 Wochen ab Auftragse : Italien : 39500 € : 801.85 € : 127 mm : 850 mm : 1200 mm : 850 mm : 720 kg : 80 cm³ : 127 x 7,1 mm : 4 x 8,56 mm : 127 x 7,1 mm : 114,3 x 5,6 mm : 114,3 x 5,6 mm : 139,7 x 8,8 mm : 139,7 x 8,8 mm : 64 x 6 mm : 88,9 x 3,65 mm : 50 x 4 mm : 90 mm : 130 x 25 stehend, 130 x 6 mm : 700 mm : 36 mm : 10 mm : 0 - 0,75 U/min : 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21600 € : 442.8 € : 1 : 1 : 2030 mm : 6 mm : 6 mm : 5 mm : 170 mm : 4 kW : 3600 mm : 1020 mm : 1120 mm : 2400 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 106340 € : 2116.17 € : 150 mm : 1000 mm : 1900 mm : 1475 mm : 2700 kg : 170 cm³ : 150 x 7,1 mm : 6 x 7,11 mm : 150 x 9 mm : 141,3 x 6,55 mm : 141,3 x 6,55 mm : 168,3 x 9 mm : 168,3 x 9 mm : 64 x 6 mm : 88,9 x 3,65 mm : 110 mm : 150 x 45 stehend, 150 x 6 mm : 800 mm : 100 mm : 10 mm : 1 U/min : 15 kW TCPlus Control with 7 Touchscreen Programmable bending speed for each individual bend Possibility to bend left and right Users manaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9704 : prompt, Zwischenverkauf v : Italien : 7780 € : 161.05 € : 1 : 1 : 42 mm : 400 mm : 570 mm : 1000 mm : 80 kg : 4 cm³ : 42 x 3 mm : 48 x 1,5 mm : 42 x 4 mm : 42 x 2 mm : 42 x 2 mm : 50 x 3 mm : 54 x 2 mm : 54 x 2 mm : 60 x 2 mm : 50 x 4 mm : 30 mm : 40x20 (liegend), 40x12 (s mm : 260 mm : 10 mm : 3,3 U/min : 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal alternatively also available as folowing models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min) IMMEDIATELY AVAILABLE DEMO-TOOLS: Brass die 1 1/4gas (42,25mm) € 170,-- castiron former 1 1/4gas (42,25mm) R112 € 420,-- MASCHINE-KIT WITH TOOLS (PRICES ON REQUEST): Time of delivery approx.  ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 € : 590.73 € : 100 mm : 500 mm : 1200 mm : 850 mm : 480 kg : 43 cm³ : 100 x 6 mm : 3 1/2 x 4 mm : 100 x 6 mm : 100 x 3,6 mm : 100 x 3,6 mm : 114,3 x 6,3 mm : 114,3 x 6,3 mm : 114,4 x 6,3 mm : 88,9 x 3,65 mm : 100 x 5 mm : 70 mm : 100 x 25 stehend, 100 x 5 mm : 400 mm : 36 mm : 10 mm : 0 - 1,3 U/min : 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 € : 255.43 € : 60 mm : 500 mm : 760 mm : 1000 mm : 186 kg : 10 cm³ : 60 x 4 mm : 2 x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 3 mm : 60 x 6 mm : 64 x 6 mm : 64 x 6 mm : 63 x 4 mm : 50 x 4 mm : 35 mm : 35 x 35 mm : 60 x 20 stehend, 60 x 35 mm : 380 mm : 10 mm : 10 mm : 1,5 / 3 U/min : 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 Gebr. Ironing machine, - from 6-12 mm, - incl. 4 coils, - year of construction 2005, The system is in use in a production ceiling plant and is in a well-maintained, ready-to-use condition.

: neu : 2023 : 9659 : prompt, Zwischenverkauf v : Türkei : 18000 € : 369 € : 1 : 2050 mm : 3 mm : 130 mm : 3,5 m/min : 2.2 kW : 3200 mm : 750 mm : 1000 mm : 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN OPTIONS: Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

There are two identical bending machines available, working width: 2000mm.

Working width: 3050mm, workpiece thickness: 3-15mm, connected load: 9.6kVA, length: 4986mm, width: 2000mm, height: 1670mm, weight: 2.7t, including documentation.

Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter.

Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm.

Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices.

Working width: 3000mm, max. sheet thickness: 15mm, with digital display of roller adjustment, driven rollers, mobile control panel, cone bending device, upper and lateral cylinder support device.

Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls.

Working width: 2500mm, max. sheet thickness: 20mm, with optical display of roller adjustment, central lubrication, cone bending device and overrun brake.

Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024.

Working length: 3100mm, sheet thickness rounding/ bending: 40/32mm, top/side roll diameter: 460/ 420mm, connected load: 30kW, with documentation, on-site inspection is possible.

Max. pipe diameter: 42mm.

Bending capacity: 6-42mm, connected load: 4kW.

Also suitable for processing flat steel, including documentation, without accessories, machine was scarcely used.

With digital display for roller adjustment, pressure roller supports electro-hydraulically adjustable from the mobile control panel, including digital displays, universal bending roller set, e.g. angle leg outside 100x100x10 to min.1400mm, the machine was never used.

Number of rollers: 3, weight: 185kg.

Including documentation.