bending machine used for sale

Equipment: 1 sledge feeder on the right 1 two-point eccentric press 70 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 3.5 mm Bandwidth: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm

Equipment: 1 sledge feeder on the right 1 two-point eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 5.0 mm Belt width: up to 40 mm Feed length: up to 320 mm Power: up to 132 rpm

Tandem 2 x 5m. Y1, Y2, X, R,, Z1 & Z2 Second controller must be repaired. - Pressure force: 150 t - Bending length: 5.100 mm - Axes: 6 (Y1 Y2 X R) - Working speed: 200 mm/seg - Control: DNC80 - Stroke max: 250 mm - Power: installed max: 11 kW - Weight: 14.000 kg

Used machine in good condition. Available for immediate delivery. - Type: hydraulic - Backgauge movement: 800 (X) mm - Inclination of beam: +- 3 mm - Open Height: 1.000 mm - Pressure force: 120 t - Bending length: 4.080 mm - Axes: X, Y, R, Z1 & Z2 - Distance between uprights: 4.404 mm - Returning speed: 180 (Y) mm/seg - Throat: 420 mm - Control: T3500T multi-touch control - Oil tank capacity: 200 l - Power: installed max: 27 kW - Weight: 15.000 kg - Dimensions (long x wide x high): 4.647 x 1.644 x 2.925 mm

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine in working condition

HAMUEL HSTM 1500 Used 5-axis vertical machining center Make: HAMUEL Model: HSTM 1500 YEAR 2009 X-AXIS TRAVEL 1930 mm Y-AXIS TRAVEL 400 mm Z-AXIS TRAVEL 570 mm RAPID FEEDS X-Y-Z 40 – 40 – 40 m/min SPINDLE 16000 rpm; 54 kW; 136 Nm; HSK 63 B-AXIS ±95 ° MAX ADMITTED LOAD 200 Kg TOOL MAGAZINE CHAIN-TYPE ; 24 POS CONTROL UNIT SIEMENS 840 D WORKING HOURS 9800 WEIGHT 25000 Kg OVERALL DIMENSIONS 6400 x 2800 x 3000 mm ACCESSORIES SWARF CONVEYOR ; PAPER FILTER ; USB PORT ; RENISHAW TOUCH PROBE NOTE MAX PIECE DIMENSIONS: 1750X360 mm; MAX ADMITTED LOAD: 200 Kg; A/C AXIS CONTINUOUS POSITIONER; POSITIONERS: 180 rpm

Haeusler 4 Roll Double Initial Pinch Hyd Plate Roll Model: VRM-HY Number of Driven Rolls: 4 Length of Rolls: 122.04" / 3100mm Capacity Pre Bend: 3.5" / 90mm Capacity: Rolling: 3.9" / 100mm Roll Diameter (Top): 31.1" / 790mm Roll Diameter (Bottom): 31.1" / 790mm Roll Diameter (Side): 23.6" / 600mm Roll Diameter (Spare Top): 25.5" / 650mm Main Motor Drive: 215 HP / 160kW Equipped With Double Initial Pinch Hydraulic Drop End Hydraulic Tilt of Top Roll Hydraulic Positioning of Side Rolls Top/Bottom Driven Via Cardon Shaft Drives to Gear Box Spare 25" / 650mm Top Roll For Smaller Diameter Rolling Set up for Hot Rolling

tube diameter: 50,8 mm wall strength: 1,0 mm square edge steel: 50 x 50 x 1 mm round bar steel: 25 x 6 mm weight of the machine ca.: 46 Kg dimensions: 0,6 x 0,4 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 kN stroke: 0-200 mm table-size: 450 x 1000 mm working speed:: 6-10 mm/ sec. return speed: 20 mm/sec work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 1,5 kW bending capacity max. - round: 42x3,2 mm : 150x10 mm weight: 320 kg dimensions: 1010x480x1120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand BENDMAK Type CYL-ST-170-20-5,0 Working lenght 2100 mm Pre-Bending 5 mm Max Thickness 5 mm Top Roll 170 mm Min Bending 255 mm Motor Power 4 kW Bending Speed 4,8 m/min. Dimensions L x W x H 4000 x 1100 x 1130 mm Weight 2300 kg Year 2015 Extra information Cone Bending device Induction hardened rolls Motorized Up and Down movement of the Back Roll Digital readout for Displaying positions of the Back Roll 2 Separte Control Units Cast Iron Body

tube diameter: 42,0 mm Stahl wall strength: 3,0 mm Stahl tube diameter: 54,0 mm CU/Alu wall strength: 2,0 mm bar material - diameter: 30,0 mm revolutions per minute: 2,0 U/min voltage: 400 Volt total power requirement: 1,1 kW weight: 80,0 kg range L-W-H: 410 x 1000 x 570 mm ERCOLINA MediBender MB 42 M - Capacity steel tube 42 x 3.0mm - Gas tube capacity 11/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - Hex tool holder - Min. outer diameter 5 mm - 1/8 gas Furnishing : - Patented quick tool change system - a bending speed - free-moving footswitch including ERCOLINA microprocessor control: - with 30 programs (0 - 29) - Each program can be programmed with up to 9 bending angles - In addition, in the work mode for each bending angle necessary correction angle must be entered The data for this ad was created with Modu ...

Manufacturer: Tubobend Type: 80 S 108 V Year of construction: 2000 Range: max. Ø 76.1 mm

- Capacity 20 tons - Bending capacity 200 x 12 mm - Stroke 200mm - NC touchscreen control Cg7z0oyokv - Foot control - Emergency stop - 400V

- Working range pipe Ø 4 - 28 mm x 3 mm for steel - Working range pipe Ø 4 - 35 mm x 2 mm for non-ferrous metals - Pipe sliding length 3,000 mm - Electronic single-axis control / angle input - Bending radius max. 90 mm - Minimum quantities - Mandrel lubrication - incl. existing tools ( 17.2 x 2 / 21.3 x 2 / 25.0 x 2 / 26.9 x 3 mm ) - Weight approx. 600 kg - L x W x H approx. 3,800 x 600 x 1,100 mm - Incl. operating instructions and spare parts list

- Pipe diameter max. 76.1 mm - Pipe sliding length max. 4,500 mm - bending radius 200 mm - Bending direction right - electronic 1-axis control - Twist angle unit with stops - electronic display of rotation - electronic display of the longitudinal position - Mandrel lubrication man. - L x W x H approx. 5,700 x 850 x 1,150 mm - Weight approx. 1,700 kg

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12900 € : 263.16 € : 60 mm : 215 mm : 215 mm : 3 : 1.5 kW : 4 m/min : 80x20 mm / 1200 mm, 40x10 : 120x25 mm / 600 mm, 50 x : 50x50 mm / 800 mm, 20x20 : Ø 50 mm / 800 mm, Ø 20 mm : Ø 100x2 mm / 1600 mm, Ø 6 : 80x40x3 mm / 1400 mm, 40x : 70x3 mm / 1600 mm, 40x2 m : 70x70x7 mm / 1000 mm, 40x : 70x70x7 mm / 1200 mm, 40x : 1000 mm : 1400 mm : 1650 mm : 950 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 67700 € : 1354 € : 3100 mm : 10 mm : 10 mm : 8 mm : 6 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 5350 mm : 1460 mm : 1550 mm : 7500 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52100 € : 1042 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 220 mm : 160 mm : 1,5-6 m/min : 5.5 kW : 3750 mm : 1180 mm : 1300 mm : 4000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad wa ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 € : 1074 € : 2550 mm : 8 mm : 8 mm : 6 mm : 220 mm : 220 mm : 160 mm : 1,5-6 m/min : 5.5 kW : 4900 mm : 1100 mm : 1250 mm : 4600 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31400 € : 634.28 € : 1550 mm : 6 mm : 6 mm : 4 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 3750 mm : 880 mm : 1100 mm : 2400 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was create ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 35000 € : 707 € : 2050 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was created w ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111100 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 117800 € : 2550 mm : 25 mm : 25 mm : 20 mm : 20 mm : 16 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5500 mm : 2000 mm : 1900 mm : 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 56100 € : 1122 € : 2050 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 4300 mm : 1425 mm : 1470 mm : 5450 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 127000 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 8 Wochen ab Auftragse : Türkei : 12000 € : 244.8 € : 35 mm : 137 mm : 137 mm : 3 : 1.1 kW : 7 m/min : 35x8 mm / 300 mm : 50x12 mm / 400 mm : 18x18 mm / 250 mm : Ø 22 mm / 200 mm : Ø 40x1,5 mm / 500 mm : 30x15x2,5 mm / 500 mm : 25x25x2 mm / 450 mm : 35x35x5 mm / 400 mm : 30x30x4 mm / 550 mm : 1050 mm : 500 mm : 1250 mm : 350 kg 3 mech. driven rolls (brake motor) hardened and ground shafts lower rolls hydraulic adjustable horizontal and vertical operation standard set of rolls foot pedal forfor- and backward drive 2 digital readouts control panel machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 38000 € : 767.6 € : 100 mm : 315 mm : 3 : 7.5 kW : 7 m/min : 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm : 2000 mm : 1700 mm : 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTe ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 22500 € : 459 € : 80 mm : 245 mm : 3 : 4 kW : 6 m/min : 100x20 mm / 2000 mm, 80x2 : 125x25 mm / 600 mm, 60x5 : 45x45 mm / 500 mm, 15x15 : Ø 50 mm / 500 mm, Ø 15 mm : Ø 100x2,5 mm / 1.200 mm, : 80x25x3 mm / 800 mm, 25x1 : 70x70x3 mm / 1.300 mm, 25 : 80x80x8 mm / 800 mm, 30x3 : 70x70x7 mm / 700 mm, 30x3 : UPN 140 / 1600 mm, UPN 12 : UPN 140 / 1.600 mm, UPN 1 : IPN 120 / 600 mm, IPN 80 : 1450 mm : 1000 mm : 1400 mm : 1700 kg 3 motor driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech  ...

: neu : ca. 8 Wochen ab Auftragse : Türkei : 64100 € : 1282 € : 2550 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 4800 mm : 1460 mm : 1550 mm : 6800 kg STANDARD EQUIPMENT fully hydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing hardened rolls 2 working speeds central lubrication system protectionagainst overload moveable control pane user manual in GERMAN and ENGLISH machine and equipment accordingto the CE regulations OPTIONAL EQUIPMENT ground and polished rolls infinitely adustable speed of rolls hydraulic/mechanic adjustable upper and lateral supports aut. material withdrawal changeable upper roll for especially narrow bending radii IMPORTANT ISSUES AT CONICAL B ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 62200 € : 1244 € : 3100 mm : 9 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 5350 mm : 1425 mm : 1470 mm : 6350 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

: gebraucht : 2021 : 9485 : Türkei : 2100 € : 1 : 1050 mm : 2 mm : 75 mm : 1930 mm : 700 mm : 1160 mm : 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine can be viewed from 18.01.2023 at the location 94036 Passau by appointment. Specifications: - Printing capacity 11 t - Stroke length approx. 0 - 200 mm - Lifting speed forward / backward 26 - 53 mm/sec - Bending performance - Round tube 90° 48 x 2.6 mm - 180° 42 mm - Flat material flat approx. 60 x 6 mm - upright approx. 40 x 8 mm - Drive 380 V / 1.5 kW - Space requirement approx. W 800 x H 1000 x D 700 mm - Weight approx. 150 kg

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12500 € : 255 € : 1050 mm : 5 mm : 130 mm : 3,5 m/min : 2.2 kW : 2200 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.250,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 17300 € : 352.92 € : 2050 mm : 4 mm : 140 mm : 2.2 kW : 3200 mm : 750 mm : 1000 mm : 1650 kg 3 reels asymmetrical roller arrangement - with pre-bending 2 driven rollers by means of a brake motor manual Back Roll upper roller can be swiveled forward forward / reverse run conical rounding by inclining the rear rollers movable control panel OPTIONS: hardened Rolls€ 1.800,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 13000 € : 265.2 € : 1270 mm : 4 mm : 120 mm : 3 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1110 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.250,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11000 € : 190 € : 1050 mm : 4 mm : 110 mm : 2.2 kW : 1100 mm : 750 mm : 1000 mm : 990 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.120,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 15000 € : 306 € : 1550 mm : 4 mm : 140 mm : 3,5 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1420 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7000 € : 144.2 € : 1270 mm : 2.5 mm : 90 mm : 6 m/min : 1.1 kW : 1850 mm : 700 mm : 1200 mm : 520 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7200 € : 148.32 € : 1550 mm : 2 mm : 90 mm : 6 m/min : 1.5 kW : 2130 mm : 700 mm : 1200 mm : 545 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5300 € : 109.18 € : 1050 mm : 3 mm : 2 mm : 90 mm : 2080 mm : 700 mm : 1250 mm : 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5750 € : 118.45 € : 1270 mm : 1.5 mm : 75 mm : 1.5 kW : 1830 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll hardened rollers right / left rotation with double foot switch user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 9660 : ca. 10 Wochen ab Auftrags : Türkei : 7800 € : 160.68 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll hardened rolls tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 3100 € : 1270 mm : 1.2 mm : 68 mm : 1.5 kW : 1610 mm : 700 mm : 1160 mm : 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14000 € : 285.6 € : 1270 mm : 5 mm : 140 mm : 3,5 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1350 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transfluid EDB 642CNC Tube Bender Year 2020 ROUND TUBING MILD STEEL 1.65" X 0.118" ROUND TUBING STAINLESS STEEL 1.65" X 0.059" MAXIMUM MOMENT OF RESISTANCE 3.4 CM3 (S235) BENDING ANGLE UP TO 180 DEGREES +10 DEGREES SPRING BACK BENDING TIME MAXIMUM 180 DEG./SEC (FRONT FEED) SPEED OF FRONT FEED 1600 MM SEC SPEED OF ROTATION MAXIMUM 450 DEGREE/SECOND REPETITION TOLERANCE BENDING +/-0.05 DEGREES REPETITION TOLERANCE LENGTH +-0.05 MM REPETITION TOLERANCE ROTATION +/-0.05 DEGREES ARBOR LENGTH/USABLE LENGTH 120" RADII MAX. 6.61" BENDING HEIGHT 45.27" BOOSTING FORCE LENGTH POSITIONING 2.5 KN APPROXIMATE DIMENSIONS 296" X 63" X 63" APPROXIMATE WEIGHT 12,100 LBS. EQUIPPED WITH: TRANSFLUID CNC CONTROL WITH WINDOWS 10 OPERATING SYSTEM AND 22" WIDESCREEN MONITOR SERVO ELECTRIC POWER BENDING AXIS SERVO ELECTRIC POSITIONING OF THE ROTATION LENGTH ALL OTHER AXIS SERVO ELECTRIC  ...

Outside diameter maximum: 90 mm Inside diameter maximum: 5 mm Pipe length maximum: 195 mm Angle degrees maximum: 40 Wall Thickness: 7 mm CNC Brand: _Unknown / Other CNC Model: CNC TOUCH Tube bending machineMacri - Provar 5 - 90 UD Controlled 5 axis A,B,Z,X,Y Axis Y,X,Z,B Accuracy 0,1 Gr Y, X, Z, B Maximum speed 6 M/Min Large tooling package with collet and die blocks Tooling 25.4 / 26.7 / 31.7 / 33.7 / 38.1 / 42.2 / 46.3 / 48.3  Tooling for steel & stainless steel  Max.Tube Ø:        90mm Min. Tube Ø:       5mm Max. Wall thickness:7mm Max. Bending radius:195mm Min. Bending radius:5mm Max. bending length:3600mm Length:            6000mm Width:             2400mm Height:            2400mm Weight:  &nbs ...

Trumpf TRUBEND 5085 - WORKING INSIDE PRODUCTION WORKING HORS: PRESENT ON PHOTO OF SCREEN Year 2011 Compression force: 85 tonnes Table length: 2,200 mm Free travel speed: 220 mm/s Accessories: Increased lift height from 230 mm to 615 mm. 5-axis bending. Hydraulic tool clamping at the bottom. Hydraulic tool clamping at top. Automatic bombing. Bendguard guard ACB angle measurement FOR CLIENT WE ORGANIZE AS WELL DISMANTLING AND TRANSPORT

Key data: 2070 , 5

Ostas SMR-S 2070x170 Premium - 3-roll sheet metal rolling machine with premium equipment Bending length: 2070 mm Capacity: 5 - 6 mm Standard equipment - Steel machine body ST-52 - large shafts made of certified steel with SAE 1050 (CK-45) - Chain and belt driven spiral gearbox for top and bottom rolls - Precision bending with brake motor - rear roller motorized - Manually extendable roller - Tape bending roller - Central lubrication system - Mobile control panel - Compliance with CE standards -User guide Included additional equipment - Digital display for lower roller - Digital display for rear roller - lower roller motorized - Hardened rollers - Extended roller shafts for fastening profile and tube bending rollers Optional equipment - Profile tube rollers Specification - Bending length: 2070 mm - Capacity with pre-bending: 5 mm - Capacity without pr ...

Capacity plate width up to 3000 mm thickness 22 mm plate prebend 18 mm dual prepinch technical data: -length of rolls 3100 mm -top roll dia. 350mm -lower roll dia. 330mm -Hydraulic power unit with 20Hp motor -Electric supply Vac 400/50 – 480/60 Configuration complete: -Hardened surface of the 4 rolls -Conical plate bend hydraulic attachment. -hydraulic power driven rolls rotation with gear unit axial each -Synchronized hydraulic power dragging . -front open drop-end to remove closed shells. -Calibration re-rolling feature for welded shells Safety configuration in compliance. Control console electric commands with digital readout Predisposed ready to connect nr. 1 central hydraulic support for large dia. nr. 1 side arm hydraulic to hold in place think plate sheet being formed