135,911 used machines on RESALE, but how to find them? Machine Search
Double bench grinder WMW Type ST300 Year: 1970 Disc drm.: 300 mm Power: 1.1 kW Dimensions: 750 x 420 x 1200 mm
Double bench grinder SOLID DS300STA Disc diameter Ø max 300 mm Disc width max 40 mm 1.5 kW 1500 rpm 220 / 380 V Dimensions: 700 x 530 x 1100 mm
Double bench grinder VEM SEWStNa40SENa350 Disc diameter Ø 350 / 350 mm Disc width 63 / 40 mm with cooling device 1,1,1,000 5 kW 3000 rpm 220 / 380 V Dimensions: 1050 x 950 x 1300 mm
Standard equipment: Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with Schuko plug 3-year warranty for single-shift operation Continuous/normal drilling capacity (mm) 6/8 (in E335/ST60) Tapping capacity (pitch dependent) M5 Spindle B12 Drilling depth (mm) 60 Projection (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), spacing (mm), dimension width (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drilling depth stop ring (positive fit) Drilling depth indicator digi ...
Bench grinder attachment IMEP 0.55 kW speed: 2775 rpm voltage: 220/ 380 V degree of protection: IP 44 approx. 5 m connection cable shaft: Ø 27 / 42 mm used, tested ! Dimensions: 465 x 200 x 345 mm
Key data: 13 mm
Made in Germany Drill chuck: B 16 Speed: 480 - 4,000 rpm
Auction-ID: A1-49000-42
Capacity 30 / 60 kg, d=0.002 / 0.005 kg, Auction-ID: A1-48959-330
Double bench grinder, brush deburring machine, deburring machine VEM, ELBTALWERK SEWStN40SEN350 disc diameter Ø 350 / 350 mm Disc width 63 / 40 mm with a wire brush ! 1.5 kW 1500 rpm 220 / 380 V used, tested ! Dimensions: 1400 x 800 x 1250 mm
bore capacity in steel (diameter): 20 mm throat: 180 mm bore stroke: 82 mm turning speeds: 220 - 2840 U/min : 290 x 290 mm total power requirement: 0,55/0,75 kW / Volt weight of the machine ca.: 54 Kg dimensions: 820 x 500 x 290 mm CE-tested spindle hood. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity 30 / 60 kg, d=0.002 / 0.005 kg, Auction-ID: A1-48959-328
Capacity 30 / 60 kg, d=0.002 / 0.005 kg, Auction-ID: A1-48959-329
Double bench grinder GISAG SE 2x400/1 TGL 24500 Disc diameter: Ø max 400 mm 4 kW 380 V Protective cover is missing !' used, tested !' Dimensions: 1100 x 700 x 1200 mm
bore capacity in steel (diameter): 15 / 18 mm throat: 180 mm bore stroke: 80 mm turning speeds: 200 - 4000 U/min : 250 x 220 mm distance drilling head - clamping area: max. 380 mm total power requirement: 1,1 / 400 kW / Volt column diameter: 65 mm tool taper: MK 2 weight of the machine ca.: 0,08 t dimensions: 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For jute or nylon bags, with labels. Auction-ID: A3-46151-35104
TABLE: 140X80X75CM / BENCH: 120X35X46CM Auction-ID: A1-49894-128
Auction-ID: A1-49846-198
bore capacity in steel (diameter): 23 mm throat: 310 mm bore stroke: 150 mm turning speeds: 90 - 2000 U/min : 420 x 360 mm total power requirement: kW / Volt weight of the machine ca.: 650 Kg dimensions: 1,2 x 0,8 x 2,4 mm Bench drill - Left/right rotation - Advance - Base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 14 /15 mm throat: 180 mm bore stroke: 70 mm turning speeds: 420 - 2100 U/min : 250 x 220 mm distance drilling head - clamping area: max. 380 mm total power requirement: 0,5/1,0 / 400 kW / Volt column diameter: 65 mm tool taper: MK 2 weight of the machine ca.: 0,08 t dimensions: 0,4 x 0,5 x 0,9 m Table Drilling Machine with: variable feed Tapping function. depth display Coolant system Belt-drive spindle protection machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Drill Diameter: 1.5 - 3 Drill chuck holder: B16 Spindle stroke: 50 mm Projection: 150 mm Column diameter: 46 mm Motor power: 350 W Connection: 230 V Dimensions (WxDxH), approx.: 220 x 450 x 590 mm Weight, approx.: 55 kg Equipment: - Machined foot with T-slots - Sprocket chuck
bore capacity in steel (diameter): 16 mm throat: 150 mm bore stroke: 90 mm turning speeds: 340 - 2200 U/min : 243 x 243 mm total power requirement: 0,5 kW / Volt weight of the machine ca.: 42 Kg dimensions: 400 x 450 x 900 mm Table drill - Digital speed display - Spindle protection - vice - drill replacement - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. - deep stop - tool set - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:100 mm total power requirement:0,7 kW weight of the machine ca.:302 kg dimensions of the machine ca.: 620 x 800 x 1950 mm Table dimensions:350 x 250 mm spindle speeds::250, 355, 710, 1000, 1400, 2000, 2500 U/min
Specifications: - Drilling capacity in wood 40 mm - Drilling capacity in steel 18 mm - Drilling spindle holder MK 2 - Quill stroke 120 mm - Drilling spindle speeds infinitely variable in steps - 60 - 2840 rpm - Max. distance table – drilling spindle 600 mm - Boom / unit tiltable left + right 45° each - Boom / unit swivel left + right - Table size 450 x 450 mm - Drive 400 V / 0.33 / 0.55 kW - Space requirement approx. W 500 x H 1870 x D 1200 mm - Weight approx. 150 kg
bore capacity in steel (diameter): 15 / 18 mm throat: 180 mm bore stroke: 80 mm turning speeds: 200 - 4000 U/min : 250 x 220 mm distance drilling head - clamping area: max. 380 mm total power requirement: 1,1 / 400 kW / Volt column diameter: 65 mm tool taper: MK 2 weight of the machine ca.: 0,08 t dimensions: 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 245 mm bore stroke: 120 mm weight of the machine ca.: 1.35 t dimensions of the machine ca.: 1.6 x 1.5 x 2.4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 350 mm turning diameter over slide rest: 310 mm turning length: 700 mm total power requirement: 4,6 kW weight of the machine ca.: 1,0 t Dimensions (HxWxD): 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm --> Height: 300 mm --> Headstock Spindle bore: 46 mm --> Spindle nose: DIN 55027-5 --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - ...
bore capacity in steel (diameter): 18 mm throat: 225 mm bore stroke: 110 mm table-size: 430x345 mm spindle turning speed - stepless: 135-4500 U/min Digital read-out Tapping attachment Cross table 530x255mm Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure power: 6-8 bar Air consumption: 8 l/Hub height of stroke: 12 mm : 134 mm no. of strokes: 400 Hub/min punching force max.: 3500 kp weight of the machine ca.: 80 kg Schüco pneumatic press for Schüco punching tools Art. No. Schüco: 290 124 manual included various pressing tools included! tool nr. 283073, 280162,299259,283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for secure and quick fastening of the press tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
punching pressure: ca. 3,2 t air pressure: 8 bar stroke: max. 20 mm distance between columns: ca. 250 x 200 mm weight of the machine ca.: 52 kg incl. various tools, see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja : 094089 spindle speeds:: linka 2100 weight of the machine ca.: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 24190 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 140 mm - 8 drilling spindle speeds 100 - 2900 rpm - Min. / max. distance drilling spindle / table 110 / 405 mm -Lighting - Keyless chuck - Coolant device - Machine vise - Machine base - Drive 400 V / 0.75 kW - Space required: W 400 x H 1250 x D 600 mm - Weight approx. 200 kg
Double-sided grinding and polishing bench MEYER type SMPMasch. No. 848 Year of construction 1963Shaft diameter 50 mmGrinding wheel holder 305 mmDisc spacing 1470 mmGrinding-polishing wheel diameter max. 800 mmWorking height 550 mmSpeed 710 / 800 / 950 rpm. Drive power 2x 3 kWNet connection 380 volts, 50 Hz.- two drive motors for each working side separately- star-delta switch for each drive motor separately- speed change by folding the drive belt- dust extraction flange 100 mm-
Folding machine KRAMER type A-toll. II 1000Fabr. No. 48 287 Year of construction 1990Useful length 1060 mmmax. Sheet thickness 3.75 mmStroke of the upper beam 180 mmAdjustability of the bending beam 60 mmBack gauge 480 mmDrive power of bending beam drive 4 kWAdrive power of upper beam drive 1.5 kWNet connection 400 volts, 50 Hz- manual and semi-automatic control- angle adjustment via angle selector- one-piece pointed rail 135- back gauge with hand crank adjustment and simple measurement scale-
Inv. Num. : 8602 Type: W 9 Producer: TOS Created: 1975 Parameters: Work table length: 950 mm Work table width: 950 mm Maximum weight of the workpiece: 3000 kg Spindle diameter: 90 mm Maximum spindle speed: 1800 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Machine weight: 11000 kg Equipment: DRO
Table, Drilling and Tapping Machine IXION Type BT 15 GLMasch. No. Year of construction approx. 1975Drilling capacity 15 mmSpindle holder Cone holder B 16Threading from M 2.5 to M10Throat depth 200 mmPine stroke 90 mmTable size 285 x 220 mmColumn diameter 75 mmSpindle speed 320 - 1600 rpm. 4 stagesMotor power 0.55 kWNet connection 380 volts, 50 Hz- Spindle speed via 4 V-belt steps- equipped with FAHRION GH 10 tapping chuck- with guide cartridge for the thread pitch, operation without
bore capacity in steel (diameter): 18.0 mm throat: 190 mm bore stroke: 80 mm morse taper: 2 Kurzspindel MK turning speeds: 225 - 4.300 U/min voltage: 400 / 50 Hz Volt table:: 300 x 240 mm column diameter: 65 mm engine output: 0.37 / 0.55 kW weight: 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
10 € 
