bench used for sale

Extruder + electric cabinet output: 200 kg Heads not included Winder not included

Carbon fiber shaft for ALV brake 440kW of 1000Nm.Spezialwelle with Flaschstücken. 980 wave length D = 125 flange outer 150.Ohne adatper (photo-packed).Info 0170/2204056Mail fa.raupp@t-online

Pneumatic press 2643 Assembly through pivot table outside the working area With protective cage and release only with a retracted swing table Table size: 10 cm x 10 cm

Material test bench / final inspection consisting of the following main components Keyence XG-H500M Digital 5 Million Pixel P/W Camera CCD: 2/3-inch monochrome CCD, squareElement all pixels 11 times read speed, 5,050,000 pixels Scan Method: Progressive (61.2 ms), Interlace (40.3 ms)Interlace is a binning process that sums up the odd rows and even lines. Model CA-DC21E Lighting Controller Type lighting controller For XG/CV-5000/CV-X200/CV-X100 series only Input: Forced shutdown of the lighting: Input voltage max. 26.4 V, min. 2 mA Edition Light control method (1) Constant voltage regulation method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change of ECU setting] Brightness levels 255 levels digital [Change of ECU setting] Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC ...

Complete Zn drum system, double row, footprint 21 x 7 m, built-up operational condition any components NEW and unused (only test run with water) 11 stations zinc bath à approx. 0.8 m³ / wet turner / 19 static rinsing, pre-- post-treatment / loading - unloading Manufacturer: Fey Galvanotechnik, Solingen / year 2020 (individual components partly 2019) The system essentially consists of: ATB S7 control system in 12x Rittal cabinets, Simatic HMI Touch Tank park: 1x stainless steel tub (double E-def), 15x PP bathtubs (triple, double and single tubs) Drain ball valves, level bar probes, temperature sensors Immersion bath warmer: 20x double E-def, 16x single E-def, 12x zinc bath, 2x zinc electrolyte attachment, 9x (3x each) thick layer, blue, yellow; Rotkappe T-QS 630/1,25-230Ws, 1250W Oil separator (degreasing): Stainless steel Friess W20 31x drum units: filling volumes up to  ...

Dauerbohrleistung in St 60: 15 mm standard ALB ear performance: 18 mm thread cutting performance: M 8 spindle: MK 2 drilling depth: 80 mm projection: 180 mm spindle speeds of stepless 200 - 4,000 rpm spindle speeds threads 200-700 rpm distance spindle/table: up to 380 mm tabletop: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full thread cutting device and programmable digital display

I'm selling a Mazak Multiplex 6200 lathe-mill. It's in very good condition, still powered up. Inspections are available by appointment. The machine is highly efficient, with two spindles, two independent heads, and a milling capability (C-axis). It's equipped with a partition wall that automatically closes from the control panel. When the wall is closed, the machine can operate as two independent lathes. It can also operate as a standard lathe with a retractable handle. I can send videos and more detailed photos of the machine. Transportation and training are available. I also have other machines for sale. Technical Specifications 640 Control (Windows) Milling Two spindles Two independent tool heads Mazatrol 640T Control Year of Manufacture: 2000 Spindle speed: 0-5000 rpm Milling speed: 0-4500 rpm Turning diameter: 320 mm Turning length: 440 mm Number of tools: 2 x 1 ...

Pneumatic press with foot-tripping

Precise, smooth-rolling standard drill, high accuracy and quality. drilling table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle In stock, available now

Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.

Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Webo, pillar drill -Motor: 0.37 kW -Translation: via flat belt -Table size: 295 x 295 mm -Drill chuck: 0 - 10 mm/B12 -Spindle stroke: 70 mm -Protrusion: 150 mm -Column Ø: 80 mm -Dimensions: 500/700/H1800 mm -Weight: 244 kg

Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1500 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 590/690/H1080 mm -Weight: 246 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 300 x 32 mm -Operating voltage: 380 volts -Dimensions: 830/600/H1200 mm -Weight: 231 kg

VakkuCar3 Bench Planer Modern mobile workstation with vacuum clamping device and height adjustment. Make your workplace on your workpiece. Vacuum flat suction; d = 190 mm Flat suction pad 250 mm x 80 mm Flat suction 240 mm x 45 mm built-in socket for auxiliary equipment Size 1800 x 800 mm Height-adjustable 874-1074 mm G & FE-VAKUUCAR-3 Extras: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78

Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOTN-150 -Grinding wheel: max. Ø 150 x 25 x 20 mm -Motor power: 0.35 kW -Speed: 3000 rpm -Operating voltage: 380 volts -Dimensions: 410/200 / H1045 mm -Weight: 33 kg

Pneumatic multi function press Operating pressure 6-8 bar Weight 106 kg dimensions 0.70 x 0.38 x 1.05 m Comments: Multi function punch air consumption 18 l per stroke, pneumatic punching operation via foot switch tripping

Torque test bench Manufacturer: BLM (Atlas Copco) Type: 3730M Built in 2001 All information without guarantee

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 0.85 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 600/420/H1140 mm -Weight: 222 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 2.2 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 350 x 50 mm -Operating voltage: 380 volts -Dimensions: 760/490/H1140 mm -Weight: 238 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: approx. 0.9 kW -Speed: approx. 3000 rpm -grinding wheels: max. Ø 160 x 25 mm -Dimensions: 500/300/H1240 mm -Weight: 80 kg

Technical data: -maximum working width 750 mm -maximum material thickness approx. 1.0 mm -Beam + upper cheek fold away -Bending rail with cut-outs - space requirement approx. B 1000 x H 1100 x D 750 mm -Weight approx. 70 kg

Counter-steering machines Boley, partly incomplete

Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 200 x 32 mm -Speed: 3000 rpm -Motor power: 0.9 kW -Operating voltage: 380 volts -Dimensions: 570/300/H1150 mm -Weight: 118 kg

Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 180 x 20 mm -Speed: 2850 rpm -Motor power: 1.1 kW -Operating voltage: 380 volts -Dimensions: 500/560/H1220 mm -Weight: 110 kg

Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 180 x 60 mm -Speed: 2980 rpm -Motor power: approx. 0.9 kW -Operating voltage: 380 volts -Dimensions: 520/400/H1420 mm -Weight: 140 kg

Double bench grinder, bench grinder, column grinder, column grinder -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 805/550/H1070 mm -Weight: 236 kg

Technical data: -Drilling capacity approx. 30 mm - spindle mount MT 3 -Spindle speeds in 2 steps continuously variable 80-1400 RPM -Table surface 390 x 420 mm -Drill unit by hand crank height adjustment -min / max distance table / spindle 220 / 580 mm -Drilling spindle stroke 150 mm -Spindle projection powered 280 mm â 400 V / 1.3 / 2.3 kW -Space requirement approx. B 480 x H 880 - H 1200 X 1050 mm -Weight approx. 250 kg -Table base with storage space B 600 x h. 910 x H 800 mm -Weight 200 kg

Table press, pneumatically operated Manufacturer K & W Beyer O.H.G Type Q10EL Power at 6 Atü 10 mkg Triggering the movement via electric valve Special price

3 re-lathes, see pictures

Cooling pump for SN 71 C Trens lathe

turning diameter over bed: 310 mm turning diameter over slide rest: 178 mm turning length: 910 mm turning dia. in gap: 420 mm spindle turning speed range: 70 - 2000 U/min spindle bore: 38 mm number of feeds: 18 Stk feed range: 0,052 - 1,392 mm/U metrical thread cutting: 0,4 - 7 mm voltage: 230 / 50 V Hz total power requirement: 1,1 kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 1,6 x 0,8 x 1,4 m • incl. 3 and 4 jaw chuck • fixed and followed steadies • reducing bush MK4 - MK3 • 2 fixed lathe centers • 1 Set of changing wheels • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, bench grinder, column grinder, column grinder -grinding wheels: max. Ø 200 x 25 mm -Operating voltage: 380 volts -Dimensions: 560/600/H1180 mm -Weight: 118 kg

Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm -spindle taper: MK4 -Projection: 365 mm -Speeds: 63-800 rpm -Spindle stroke: 195 mm -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm -Weight: 1026 kg

Code 7418 Description 5 Spindle drilling machine Make Webo Modell B – 20 S/N Year 1975 Table 1740 x 360 mm Distance from centre of spindle to column 250 mm Spindle taper 2 MC Spindle stroke 190 mm Speeds 125 – 2000 rpm Motor 1,1 / 0,9 kW Volts 380 Volts Machine is in good condition.

: 18 mm : M 12 : M 14 : MK 2 : 225-4.300 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel total power requirement: 0,37/0,55 kW Machine height: 840 mm weight: 110 kg Standard equipment: - Main switch with motor protection switch lockable - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 3.3 kW -Speed: 1400 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 800/1120/H1540 mm -Weight: 434 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 730/400/H1075 mm -Weight: 156 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 690/500/H1260 mm -Weight: 148 kg

: 14 mm : M 10 : MK 2 : 230-4.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 16 mm : M 12 : MK 2 : 100-2.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore diameter: 620 mm spindle diameter: 130 mm bore depth: 320 mm feed stepless: 0 - 12 mm/min turning speeds: 10 - 70 U/min voltage: 380 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,0 x 1,2 x 1,3 m transportable drilling out work, completely ready for connection gear of drill spindle runs over LENZE planetary drive advanced feed with LENZE direct current motor, output: 160 watt clockwise and counterclockwise with tool holder for Ø 420 x 620 mm, tool holder for tooling equipment fabri. LENZ LPAS 3, diverse turning steel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 240 mm bore stroke: 110 mm turning speeds: 125 - 2850 U/min : 310 x 320 mm distance drilling head - clamping area: max. 650 mm total power requirement: 0,75 / 400 kW / Volt weight of the machine ca.: 0,175 t dimensions: 0,95x0,8x1,75 inkl. Tisch m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, bench grinder, column grinder, column grinder, Cut-off machine, polishing machine, polishing stand -Motor power: 0.45 kW -Speed: 2,800 rpm -Max. Grinding wheels: Ø 150 x 20 x Ø 32 mm -Operating voltage: 400 volts -Dimensions: 650/700/H1500 mm -Weight: 198 kg

Drill press, drill press, stand drill, pillar drill -Table size: 500 mm -spindle taper: MK4 -Projection: 400 mm -Speeds: 38-750 rpm -Feed: 0.08-0.13 mm/rev -Columns: Ø 220 mm -Spindle stroke: 235 mm -Transmission: -Dimensions: 640/1020/H2730 mm -Weight: 965 kg

Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise -Parallel vise: jaw width 150 x 30 mm -Wingspan: 190 mm -Quantity: 1 available -Dimensions: 485/210/H190 mm -Weight: 26 kg

: 14 mm Boring power: 15 mm : MK 2 bore depth: 70 mm throat: 180 mm : bis 275 mm : 529 mm table surface area: 250x220 mm column diameter: 65 mm Total height: 890 mm total power requirement: 0,6/1,0 kW : 420-2100 U/min. weight of the machine ca.: 63 kg Machine with CE mark! new machin Domestic equipments: - Stepless speed control - Table adjustment via rack - Digital speed display - Full motor protection - drill protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bench Grinder - Diamond grinding wheel MAPE BDS.100 Machine for sharpening cutting tools Rotation: 3000 RPM Integrated lubricant pump Equipped with: 2 diamond grinding wheels Ø 110 mm + 1 spare wheel (see abacus) Voltage: 380 V Length: 1000 mm Depth: 700 mm Total height: 1400 mm Weight: approx 200 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 1/200 -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/420/H1420 mm -Weight: approx. 72 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 430/420/H1130 mm -Weight: 80 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/410/H1070 mm -Weight: 72 kg