belts used for sale

Workpiece dimensions up to approx. 5 m. length, 250 mm width Sliding blocks for possible loading with singulator Transverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermediate distance x 1m25 x 0m80 x 0m80 x 1m00 x 4 perpendicular stop rollers 4 non-driven feed rollers 1 Interroll driven feed roller, built-in motor 0.37 kW, speed 0.20 m/s Working height 70 cm Electrical cabinet not included

IMA SAFE A83 E horizontal cartoning machine with intermittent movement Machine with solid steel structure, complete with: - Full fairing to protect the operator; - Base frame painted in STEEL IT 1002; - Electrical installation in accordance with EN 60204; - Voltage 400V, 50Hz, 3-Phase, + Neutral + Earth; - Control logic by PC B&R microprocessor - Color touchscreen for programming and visualization Machine status, controlled by a second B&R PC - In-line feed belt, with intermittent movement; equipped with timing belts (absolutely no chains) and with interchangeable step cups, with the possibility of with simultaneous adjustment option, length 2000 mm; - Horizontal conveyor belt for feeding boxes with pre-alarm; - System for detecting the amount of blister packs in the feeder conveyor belt; - Minimum fill level detection in the cardboard magazine; - Group for introducing t ...

Used spiral mixer Kemper SPL 75 for the production of high-quality doughs. The machine can be switched slowly and quickly with 2 levels in automatic mode via 2 timers. The boiler, spiral and tool are made of stainless steel. Boiler can be switched with right and clockwise rotation. The machine is immediately available in the warehouse in Bielefeld. Machine is with new wear parts and repainted Machine completely redesigned -the following parts are renewed, buttons, clocks, ball bearings, V-belts, seals, Cable and machine repainted -2 speeds slow and fast -2 timers, automatic switch-on and switch-off - with plastic flour dust cover -Boiler, spiral and guide rod made of stainless steel -Push-button control -Boiler capacity approx. 175 litres -Bowl diameter inside 76cm, kettle height inside 44cm -Boiler right counterclockwise rotation - Manual and automatic switcher - Machine  ...

Key data: 630 mm, 250 mm, 7 kW

Technical details: - Max. table width: 630 mm - Max. table length: 1,050 mm - Max. planing width: 630 mm - Max. planing height: 250 mm - Diameter of suction nozzle: 140 mm - Diameter knife shaft: 120 mm - 4 x strip planer knife, 820 x 35 x 3 mm - Knife shaft speed: 5,000 rpm - Manual star-delta switching - 2 feed speeds, 9 + 18 m/min (manually adjustable) - Thickness table adjustment manually via handwheel and analogue display (scale) Accessories: - 1 x "BARKOMAT" magnetic tool set for adjusting the planer knives Engine data: - Voltage: 380 V - Current: 16.8 A - Frequency: 50 Hz - Power: 7.5 kW (10.0 hp) - Speed: 2,860 rpm - Feed motor power: 0.9/1.3 kW Dimensions (LxWxH): 1,450 x 1,300 x 1,400 mm (incl. extraction nozzle) Transport dimensions (LxWxH): 1,200 x 1,450 x 1,500 mm (on EURO pallet) Weight: a. 950 kg The machine has been completely cleaned, ove ...

We have for sale used RADEMAKER CRUSTO BREAD LINE WORKING WIDTH 600 MM. The line is rarely used and in good condition. Been in storage for the last 6 years waiting to go into production again but because the factory changed its mind it is now being sold. The conveyor belts have been removed, they have hardened in storage. Otherwise the line has been checked and everything is working. Product specification: Products capacity for example. Niittypitko ( A long Finnish bun ) 2000 pcs / h, 2 rows, dough thickness 3-4 mm Coffee bread Kranssi 2000 pcs / h, 2 rows, dough thickness 3-4 mm Muhku ( sweet bun ) 10 000 pcs / h, 8 rows, dough thickness 6-8 mm Ciabatta, 7200 pcs / h, 6 rows Folded bread, 4800 pcs / h, 4 rows, dough thickness 5 mm Capacity based on 20 strokes per minute for the retracting belt, in combination with the product discharge conveyor system  ...

Regular service, freshly serviced after hydraulic cylinder GO, oil changed, belts replaced and overall in very good condition. Accessories-tool holders, jaws, high pressure cooling. Turning diameter over bearing: 533 mm, max. turning length: 660 mm, feed diameter: 250 mm, spindle clearance: 65 mm Spindle speed: 3,400 rpm, spindle power: 22.4 KW, number of tools: 12 x VDI 40 tool probe, including tool holders.

Automatic Carton Case Erector SIAT F144/4 DX The automatic case erector F144 was built in year 2008 and it is designed to open a ready cut and folded card board blanks as a product box and after that to seal with adhesive tape the bottom flaps of box so that it is ready to be filled with products. Two carriages moved by compressed air (SMC+BOSCH) with suckers to pick cartons from box storage, square and push them in drive belts (2 motors kW 0,18 each) for the bottom flaps forming and sealing Readymade, open cases are fed to a 3 meter long motorized belt conveyor. The case erector has a variable output up to 700 boxes/hour according to box dimensions. Control panel with OMRON PLC has the following functions: box counter - box timer, low box storage alarm, brake/end tape alarm, full line alarm after the machine. F144 model is easy to operate and is built in accordance with CE safety s ...

Professional saw for cutting large materials -cutting width 4200mm -cutting height 95 mm -machine dimensions: width-6450 height-2100 length- 12300 -rear automatic loading -automatic material rotation -associated cuts -air tables 4 pcs -pneumatic disc change 380mm discs pre-cut 180mm -wheels 4500/min -electronic adjustment of cutting and pre-cutting height -optimization program -power of main motor 17,2 KW -total power input 24 kW -400V -year of manufacture 2012 The machine is continuously serviced and the following parts have been replaced: - servomotor of the main disc - servomotor of the pre-cutting - ball screws of the saw unit guide - 4 pcs of frequency converters - Replacement of air handling tables - Replacement of belts, valves, stops, end sensors, cables, cable lines, oil, etc.

Automatic feeder GEA, type Shingle Loader 600, 3-lane insert, without line distributor,, for format 2.3,, 2 buffer sections, 3 insert portions on the belts,, knife edge tape,, removed, is dry in storage.

Line for filling delicatessen products in plastic trays, consisting of:, Cup filling system, make Waldner, type 12.3, year 2011, 2 lanes (2 different formats) - but it can only be worked in one lane., Format set 1: round cup diameter 100mm (incl. rim) height 80mm and 60mm, Format set 2: Rectangular cup 185mm long 135mm wide (including rim) 35mm deep, The trays are sealed with film from the roll, Roll magazine approx. 500mm long, 400mm wide, Waldner space requirement: approx.: 2,100 m 2,100 mm, Outfeed belt of the Waldner: approx. 1,800 mm, Dosing of liquid and free-flowing components:, The system has two filling heads, which are filled via a pipeline directly from the cooking kettle., The pipeline can be completely pigged., The pigging line and Maso - Sinus pump, type SPS 3, are included in the scope of delivery., Feeding of the multihead weigher by means of two belts:, Tunnel elevator  ...

Sorting, cleaning, blanching and peeling plant for carrots and beetroot, make Komen & Kuin, Blancher capacity:, 10 tons of carrots per hour up to 80°C,, 5 tons of beetroot per hour up to 80°C,, max. throughput time: 35 minutes,, Dimensions, approx.:, Height: 3.50 m, Width: 3.20 m, Length: 8.20m, matching:, 1) Sorting machines for beetroot, celery, etc. …., Dimensions, approx.:, Height: 2.60 m, Width: 2.40 m, Length: 6.90m, Fraction 1 to 3 cm, Fraction 2 to 7.5 cm, Fraction 3 to 10 cm, Fraction 4 Overflow, 2) washing machines, Washing machine 1: drum diameter approx. 80 cm,, Distance between the bars about 5 mm,, Length drum approx. 200 cm, Washing machine 2: drum diameter approx. 90 cm,, Distance between the bars about 10 mm, Length drum approx. 300 cm, 3) Stoner, 4) heat exchanger, 5) various ascending belts, 6) Read tape, 7) different pipes, 8) Different pumps

SINGLE SHAFT SHREDDER, V Rotor width 2.000 mm. 78,74 Rotor diameter 500 mm 16.69″ Motor power 90 kW n.112 knifes 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on  ...

used Kalmeijer KGM pastry forming machine? Manufacturer: Kalmeijer? Type: Kalmeijer KGM? With a forming roller No. 1501-920? The thickness of the dough figures is adjustable.? Dough hopper, forming roller and dough feed roller are easily removable for cleaning. Easy to use? The conveyor belts for the sheet metal can be folded in and out. The machine takes up little space.? The machine is on castors and therefore mobile.? Dimensions:? Height: 123 cm? Width: 166 cm? Depth: 52 cm? Price on requestDetails see pictures.The Kalmeijer pastry moulding machine is very suitable for the production of pastries from various shortcrust doughs, which are used to make croissants, biscuits, speculoos, etc. Because there is no friction or pressure on the dough in the machine, doughs with a fat content of 30% to 70% and a sugar content of at least 30% (100% of the flour) can be used. This makes it possible ...

Product Description:Manufacturer: KalmeijerType: Kalmeijer KSMThe thickness of the dough figures is adjustable. Dough hopper, forming roller and dough feed roller are easily removable for cleaning. Easy to useThe conveyor belts for the sheets can be folded in and out. The machine requires little space.The machine is on castors and therefore mobile. Dimensions:Height: 132 cmWidth: 51 cmDepth: 102 cmSee pictures for details.

Used Pastry Forming Machine Kalmeijer KGMHerducer : KalmeijerType: Kalmeijer KGMwith 1 forming roller thickness of the dough figures is adjustableDough hopper, forming roller, dough feed roller is easily removable for cleaningEasy operationThe transport belts for the trays are foldable and foldableMachine requires little spaceMachines can be moved on rollersDimensions: Height: 122cmWidth: 170cmDepth: 52cmDetails see pictures.

Kalmeijer KGM pastry forming machine usedManufacturer : KalmeijerType: Kalmeijer KGMwith 1 forming roller thickness of the dough figures is adjustableDough hopper, forming roller, dough feed roller is easily removable for cleaningEasy operationThe transport belts for the trays can be folded in and outMachine requires little spaceMachines can be moved on rollersDimensions: Height: 122cmWidth: 170cmDepth: 52cmDetails see pictures.The Kalmeijer pastry forming machine is very suitable for the production of pastries from various shortcrust doughs from which croissants, spritz biscuits, speculoos, etc. are made. Because there is no friction or pressure on the dough in the machine, doughs with a fat content of 30% to 70% and a sugar content of at least 30% (100% of the flour) can be used. This makes it possible to use the doughs according to your own recipe and make pastries according to your o ...

Knapp transfer roller conveyor Toothed belt slider 90° 525-690-625 RA1890 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Nominal/outer width (NB): 690 mm Length: 525 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 525 Nominal / outside width in mm: 690 Roll width in mm: 625 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,25 Überschieber Con ...

Drill for drilling pot belts, drawer guides and any kind of system drilling Top condition many extras

General SKU361T1082 LocationBarneveld MakeFerrum TypeDSZ-OR/T 1000/500 No.414-092 396 Year of construction2001 Main Features MaterialStainless steel Motor11 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Rubber linedhallar chamber Perforated basketcheck Capacity200 Ltr. Basket sizesDia 1000x500 mm Max. loading weight250 kg Hydraulic operatedcheck Liquid outletDia. 100 mm With hydraulic unitcheck Wandfluh HN10-6nvh, motor: 0,75 kW, 230/400 volt, 1380 rpm Motor11kW, 400/690 volt, 1475 rpm Max. basket speed1200 rpm MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information Mounted on foundation platecheck Total height1,7 m Weight2400 kg CEcheck Floorspace1,8x2,2 m ATEX compatiblecheck Extra SpecificationsRevised machine! Including: new motor, pulleys, belts, shaft seal, and bearings. Filter area 1.57 m². C ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 145200 € : 2889.48 € : 1350 mm : 0,4 - 120 mm : 1370 x 2200 mm : 6000 m³/h : 150 mm : 6 bar : 4200 mm : 2300 mm : 2350 mm : 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximu ...

: neu : 2024 : 5551 : Mai 2024, Zwischenverkauf : Italien : 57800 € : 1161.78 € : 1 : 650 mm : 0,5 - 170 mm : 670 x 2200 mm : 4000 m³/h : 120 mm : 6 bar : 78 (+/-2) dB : 1045 mm : 1735 mm : 2090 mm : 930 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on req ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 € : 1487.4 € : 1350 mm : 0,5 - 170 mm : 1370 x 2200 mm : 4000 m³/h : 200 mm : 6 bar : 78 (+/-2) dB : 1750 mm : 2100 mm : 2180 mm : 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable  ...

Heidelberg Standing Sheet Display STA 30/F; cleaned and tested; new tapes; new dampers; Format max. 300x110mm, min.30x20mm; Height adjustable. Smal format vertical stacker Heidelberg STA 30/F; cleaned and checked; new belts; new bumpers; size max.300x110mm, min.30x20mm; adjustable in hight.

CNC wide belt grinding machine, manufacturer: WEBER, type: KSF-2-1350, year of manufacture: 2007, serial no.: 92.445.66, weight: 3,500 kg, CNC control SIEMENS SIMATIC, touch panel, 1 batch of abrasive belts and accessories

Belt sander, manufacturer: KUHLMEYER, type: ZBS-E, year of manufacture: 2012, serial no.: 1204041, 14 A/ 400 V/ 150 Hz, weight: 2,000 kg, table size: approx. 270x100 cm, storage frame, with vacuum rotating device, 1 lot of sanding belts, pick-up: by arrangement on 13 or 14.06.2024

Semi-automatic vegetable peeling machine FINIS Vegetable peeling machine type cylinder 80, manufacturer: FINIS together with conveyor belts - 2 pcs. , year of production 2012 year 2012

PND DE-CALYX stalking machine The stalking machine, DF12, is designed for stalking and slicing strawberries and radishes in halves or quarters. It is a device that reduces the manual work done when stalking by hand. The model has a merry go round feed belt (dimensions: 3700 mm x 300 mm), which allows operators to always have the product at hand to load for processing. The product is positioned manually into the appropriate slots - the membranes - from where, in a continuous movement of the belts, it goes to the processing station. Machining is carried out in three phases: - alignment to the line, - stalking of the fruit, - pushing out the fruit, which can be combined with the slicing phase (in halves or quarters). Dimensions of the conveyor belt of processed fruit: 1800 mm x 300 mm Technical data: capacity: 230 fruits/min. machine dimensions: 5500x1185x2500 mm  ...

Manufacturer : Collette (GEA) Model: Gral 600 Year : 1983 Type : High-Shear Mixer Granulator Products : Simultaneously mixes dry powders, humidifies these powders and wet granulates them Gross capacity : 600 L Nominal capacity : between 1/2 and 2/3 gross capacity Weight : 3000 KG Mixer motor power : 37 KW Granulator motor power : 7,5 KW Transmission : belts Mixer speed : 95 and 135 rpm Granulator speed : 1500 and 3000 rpm   Valve discharge height : 1030 mm Overall dimensions: 2850 x 1360 x 3200 mm (documentation)

Manufacturer: Sevin Type : Mixing tank / disperser. Materials : Vessel + double jacket + heat insulation: stainless steel Feet + stirring support in steel. Volume: 575 L total / 500 L useful Jacket: steam / liquid Manual central drain 2 lids / inspection hatch Mixing tool: dispersion rotor ? 250 mm Motor power : 1,1 KW - 1500 rpm Transmission : 3 x belts (new)

used spiral mixer Diosna SP 200 D, overhauled, as good as new, for 200 kg dough, 2 clocks, stainless steel kettle, stainless steel spiral, machine no. 9912-174, electrics renewed, repainted, new bearings, new V-belts

Wrapper Universe Kasper Model: HWM 30/3 Croissant winding machine for all sticks such as corn tip and pretzel sticks, etc. Universal Winding Machine for all doughs for wrapping depending on the vet Stainless steel Dough insert approx. 20 to 150 g 300 mm belt width Machinery on the move all belts and scrapers NEW DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Used machine overhauled with 6 months warranty Option: Feed belt EB We have the largest selection of winding machines in stock!

Fritsch Rollfix easy Model: 50WK650 Rollfix Dough sheeter with pull-out table on the left for all doughs for rolling out and touring Stainless steel electric flour with program control Belt width 650 mm Long-roll table at the bottom with printing board with tow for impact for long scooters Infinitely variable roller adjustment New belts and wiper blades Machine mobile with 2 brakes DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled 6 months warranty Many more sheeters in stock!

The machine is in good technical condition, can be tested under power. In operation 4/2007, spindle clearance 78mm, tool head 12pcs VDI40, driven tools, chuck 254mm, hydraulic tailstock Max. turning length: 660 mm Regular service , new spindle belts. The machine has a Samsys multisaver 5.55 electro bar feeder. accessories : tool holders, driven tools, jaws. The machine is in good technical condition, can be tested under power. The machine comes with Samsys multisaver 5.55 electro bar feeder. accessories : tool holders, driven tools, jaws.

- Semi-automatic with manual adjustment - With two TN/50 type heads - With 2 lower drive belts and upper adjustable guides - Infeed table with cartons support, length 500 mm - Outfeed table, length 500 mm - Extendable roller conveyor, width 560 mm x length 1200-4500 mm - Cartons width: min: 75 mm to max: 510 mm - Cartons height: min: 150 mm to max: 500 mm - 400V/ 0.6 kW

Fritsch Euroline transporter-red belts, Spreading transport table Spreiztisch Стол разводки рядов тестового полотна

The SEEMA CS200m carton sealing machine offers all the advantages you can expect from a reliable carton sealer. The lower and upper conveyor belt drive also transports flat or tower shaped carton formats and pastes them. Width: min. 175mm - max. 500mm Height: about 450mm Strom / Volt: 240 Optional accessoriesReplacement drive belts 1345x50mm (ID6108)  More then 300 machines new and second hand on our seema .de

Machine line Combiform / single-sided edge banding machine, consisting of: Feeding by means of 1 lifting table, 1 one-sided edge banding machine IMA, type: Combi-Form/K/I/R75/885/V/vR3, year of construction: 1997, comp. no.: 15018, with 3 conveyor belts, partly as a waste inclined conveyor belt, 1 brushing unit WANDRESS, type: BIQ 46/1/2200, year of construction: 2007, no.: 070838, 1 output roller conveyor SYSTEMATIC, type: AR-2, year of construction: 1997, machine no.: 97.052

for adhesive tape below. Optional on top - fully automatic sealing, Gluing drive: -drive motor for feed belts -pneumatic arm to close the lid  More then 300 machines new and second hand on our seema .de

Width 110 cm 2 sanding belts You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 32.4.9.

Muller Martini Perfect Binding Line, Equipped With: Gathering Machine: Muller Martini Type 1571, 12 Stations, Plus Hand Station, Trasnfer Element / Reject Gate Müller Martini 3641, Transfer Element To Binder Müller Martini 3643. 94.02359, MONOSTAR with 18 Clamps, Milling and Notching Station, Hot-Melt Spine and Side Gluing with Pre-Heating Tank, Stream Cover Feeder, Pressing Station, Conveyor Belts to Trimmer. Three Knife Trimmer: Muller Martini Merit 3671 (1998), Muller Martini 3631 (1998) Stacker Delivery, Mechanical Speed: 5,000 Cycles/Hour, Format: Min. 100x140mm, Max. 420x305mm, Book Thickness: Min. 3mm, Max. 60mm, Cover Width (Open): Min. 203mm, Max. 642mm.

We have a filling machine from Tetra Pak for sale. It has been running 2cl oatmilk Tetra Classic packages. Spare parts, a nice carton erector from 2018, marking equipment and some conveyor belts are also included in the sale.

The Formcook Combi Cooker combines intense heat transfer through conduction (contact) and forced air and steam (convection). The Combi Cooker is designed for browning, searing, baking and steaming a wide range of protein and vegetable products. The bottom of the product is cooked or browned on a solid, non-stick belt that runs over the lower heating plates, and steam and hot air on the top ensure the required temperature and color development. The Formcook Combi Cooker is one of the most versatile cooking systems in the industry, capable of cooking all types of solid and semi-solid products with a natural, home-style appearance., Dimensions: 7200 x 1500 x 2300 mm (L x W x H), Cooking area: 950 x (2 x 2500) mm (W x L), Cooking time: 0:15 - 8:51 minutes, Heating plate: electric, Temperature range: plates max. 260 °C, Electrical connection values: 275 kW, 400 A, 3 x 400 V, 50 Hz, Compresse ...

Key data: 190 mm, 16000 mm, 660 mm

External cylindrical grinding machine for tubes with diameters of 190 .. 660.4 mm, grinding with grinding wheels and abrasive belts, overhauled in 2017

Key data: 150 mm, 2000 mm

No-load speed: 3000 1/min Nominal consumption: 4 kW Belt dimensions: 150 x 2000 mm Voltage: 3 x 400/440V 50/60Hz Weight: 93 kg No-load speed at 50Hz: 3000 1/min Many replacement abrasive belts P60 and P40

Overview The fully automatic KEG plant was manufactured in 1997 by the German manufacturer BTB. The plant cleans the inside and outside of the KEGs and fills them with a capacity of approx. 60 KEGs/h. Technical details Capacity: 60 KEG/ h for 30l DIN KEGs Formats: 10l, 20l, 30l, 50l, DIN or Euro KEGs Fittings: Micromatic flat fitting and Keggyfittng Scope of delivery Cleanomat CL5 with 4 active cleaning stations with 1 filling station Medium pressure external washer 3x supply units á 300l for mixed water, acid & lye Conveyor belts Volumetric filling system Automatic filling via volumeter Automatic filling via pressure transducer CIP cleaning of the CO2 line  

Complete system Dematic 84180 mm order picking system with empty crates accumulating roller conveyor with flow racks. RA1968 Complete line consisting of: Order picking with racks and flow-through infeed Passage Outgoing goods packing Shipping Order picking: Length: 84180 mm Frame width: 500mm Roll width: 440mm Undriven roller conveyor on both sides Two accumulation roller conveyors for empty and full boxes Roller conveyors are equipped with plates for pushing over the crates Pallet racks with flow inserts and pallet flow Flow racks with adjustable widths Passage: Consisting of vertical conveyors, incline and decline belts Shipping: Loops for packing and empty boxes 33 m loop for full crates 20 m loop for empty crates Overfeed and passage to connect loops with each other further transport with ascending belt to the stretcher several stretchers at outgoing goods Features: For a customiza ...

Mori Seiki SL 2500 Y / 650 / Multifeed Bar Loader Mori Seiki SL 2500 Y. 4 axis machine. Hydraulic and programmable tailstock. Multifeed bar loader 1,5 meters. Turret with 12 stations, all of them motorized. Y-axis travel +- 60 mm. C-axis. Integrated main spindle motor 18,5 KW. Motorized tools motor 5,5 kW. Motor starting torque 640 N/M. Integrated motor without belts or steps. Main spindle size A2-8. MT5 Morse taper tailstock. Bar pitch 75 mm. Kitagawa B-210 main spindle chuck 250 mm with metric system. Prismatic guides on all axes. Main spindle speed 3.500 rpm. Speed of driven tools 4.000 rpm. Turning diameter 755 mm. Machinable diameter 390 mm. Machinable length 655 mm. Oil cooler for Daikin spindle. Mapps 4 automatic conversational programming system. Automatic effort control and tool consumption monitor. Speed of rapid traverse 18 a ...

used spiral mixer Kemper SPL 50, overhauled, electrics renewed, repainted, new bearings, new V-belts, watches overhauled, for 50 kg flour, 2 watches, stainless steel kettle, stainless steel spiral, factory no. 673663

Overview  The bottle washer was manufactured in 1998 by the German company Krones. It is located at a German mineral fountain and is part of a line that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The bottle washer is still assembled.  Technical data  Capacity: 44,000 bph  Control range: 17,000 - 50,000 bph  Bottles per row: 35  The Machine in Detail / Equipment Features Residual emptying Pre-soak/ pre-caustic High pressure pre-spraying with automatic screen discharge Machine multi-part with 3 shocks Pre-soak, water zone incl. head section Discharge in V2A Post-leach immersion bath KES Post-leaching area in V2A  Bottle cell in steel with plastic mouth Feeding table in VA Insertion finger feed with safety shutdown Discharge with pick-up finger and safety cut-out Muzzle basket control at the ejector Shard ejector behind the d ...

Bütfering Rival 416 RRTT - Wide-belt metal grinder - Control: Terminal TE 1-Metal - Thin sheet deburring (cold-rolled sheets) - Heavy sheet metal deburring (hot-rolled sheets) - Surface grinding - incl. manual - Year of construction 2004 Specification - Grinding width: 1650 mm - Working height: 920 mm - Workpiece thickness: 0.6 - 150 mm - Sanding belt width: 1670 mm - Sanding belt length: 2620 mm 1. Aggregate: - Sanding belt drive: 1 speed: 18.5 kW - Sanding belt speed: 18 m/s - Contact roller diameter: 220 mm 2. Aggregate: - Brush drive: 1 Speed: 11 kW - Brush speed: 9 m/s - Brush diameter disc/round brush: 150 / 200 mm - Motor oscillation: approx. 120 strokes/min - Stroke: 46 mm 4. Aggregate: - Brush drive: 1 Speed: 11 kW - Brush speed: 9 m/s - Brush diameter disc/round brush: 150 / 200 mm - Motor oscillation: approx. 120 strokes/min - Stroke: 46 mm Fe ...