belts used for sale

FinnPower SG5, turret punching machine FMS-system for punching of sheet metal blanks, with integrated power shears, loading and sorting system (by conveyer belts, no stacking possibility) Maximum sheet size: 2 500 x 1 250 [mm] Maximum punch force: 300 [kN] Tooling: Mate tool holder Number of tools: 25 tools in turret, A-D station (Mate Standard) Index tooling: Yes, for specific stations Multitool possibility: Yes Year of manufacturing: 1997

EXTRUSION LINES FOR SPIRAL PE PIPES / 300/1200 Max. diameter: 1200mm Min. diameter: 300 mm Diameter pipes D 300,400,500,600,700,800.900.1000,1200.SN4 and SN8 EXTRUDER/...1 Manufacturer/ Top Industri China Model/ D.65 Year/ 2007 Serial no./ No.1234 Screw diameter/ 65 Screw L/D ratio/ 33 Output capacity/ (kg/h) 250 Main drive power/r (kW) 50 Screen changer/ (YES/NO) No Co-extrud (YES/NO) No Running hours/ DIE HEAD Manufacturer/Fabricante Top Industri China Model/Modelo K2 Year/año 2007 Serial no./ No.1234 Extrusion tools and calibration tools A total of 8 sets of tools for extrusion and calibration of a square profile CALIBRATION TANK/ YES Manufacturer/ Top Industri China Model/lo Top Industri China 6000 Year/ 2007 Serial no./ No.1111 Pipe range diameter/ square profile No Vacuum pump/ 4kw Length/ 6000 COOLING TANK/ YES Number/ 1 Manufacturer/ Top ...

Plastic Tube Filling; Norden NM 2002 DF Model: NM2002DF Year of construction:1988 Machine is versatile enough to meet the demands of pharmaceutical, cosmetic, tooth-paste and food environments. Quick and precise dosing solutions for both high and low viscosity products. Ideal for the precise filling of creams, pastes and gel products in tubes. (mayonnaise,tomato puree,ketchup etc.) Complete line formation with current set up for a tooth-paste production with transfer system between filler/cartoner,cassette infeed, conveyor belts and packaging robot. Technical Data Norden Nm2002DF: Filling volume 1–300 ml Production speed: up to 200 tubes per minute Materials: stainless steel and aluminium Hot Air sealing unit for plastic, plastic-laminated Automatic level control Dimensions (L x W x H): 3400mm x 1600mm x 2250mm Weight: approx. 5700 kg Condition: as good as  ...

Double contact belt sander ACETI type 29 Double belt sander, belt sander built in 1999 Belt belt belt 50 mm Belt speed 15 and 30 m/sec. Contact roll 200 mm x 50 mm, belt width 50 mm, belt length 2000 to 2500 mm, working height approx. 900 mm , speed 2800 rpm. Drive power 1.1 / 1.9 kW mains connection 400 volts, 50 Hz. • 2 belt speeds via pole-reversible drive motor • rubberized contact roller made of aluminium with grooves• grinding arms infinitely adjustable between 0 ? 90• belt tension via threaded lockers with handwheel • belt run adjustable via guide roller • dust extraction via extraction fan with dirt collection bag at the bottom of the machine substructure • assembly = 2x sanding belts 2000 x 50 mm with 40 grit (new) space requirement L x W x H 700 x 600 x 1850 mm Weight 145 kg good condition; used

Belt withness; 500 mm. - With control-unit, 2 Pcs. Conveyor belts, Stainless steel Feeder and Frame.

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4280 € : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 1 : 3 kW : 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are e ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5680 € : 117.58 € : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe ...

: neu : 2023 : 5543 : prompt, Zwischenverkauf v : Niederlande : 3660 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm The  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6910 € : 143.04 € : 1 : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary type ...

weighing range max. 300 g, resolution e= 0,1 g, accuracy from +/- 200-640 mg, speed adjustable, weighing cell BF 8, belt direction left to right, belt width 120 mm, axial distance feeding/weighing/outlet belt 420/260/420 mm, pneumatic discharge, printer, new belts, drive 230V/50Hz

workpiece dia.: 100 mm module: 3.0 mm fixture slide travel: 400 mm Control: Siemens - Sinumerik 840 D max. milling cutter diameter: 80 mm cutter length max.: 180 mm turning speed range: 50 - 12.000 U/min table turning speeds: 3.000 U/min Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached extraction system: Ringler, - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle - AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - Workspace, - tailstock, - measuring device, - refrigeration system, - Industrial robots: Epson, - goods carrier, - conveyor belts, - control panel, The machine is in very goo ...

weighing range max. 6,000 g, accuracy e= +/- 0,1g, output max. 400 packs/min, Class X(1), s/s version, belt direction left to right, pneumatic bad discharge, adjustable belt speed, without feeding belt, belt width 360 mm, axis distance weighing belt 400 mm, outfeed belt 500 mm, new belts, Touchscreen colour display, weighing cell BF 20, height adjustable, drive 230/115 V, 50/60 Hz

1 used bread roll line Manufacturer: König Maschinenbau Austria Type: Eco 5000 Machine completely readjusted! New Steam Cylinder! New UV disinfection! Belts and troughs in good condition! The machine has been cleaned and is ready for immediate use! Viewing and test run possible at any time! Sold only to professionals. Only the written purchase contract is binding! The brands and characteristics mentioned here are only used to describe the product. If you have any questions, please feel free to call or send an email at any time! The machine can be supplied by our own fleet of vehicles (at a cost), or sent via freight forwarder! It is also possible to organise a commissioning with a master baker! In accordance with EU law, we would like to point out that we do not assume any guarantee, warranty, liability for material defects or the like. This does  ...

Automatic longitudinal and transverse conveyor for transporting Hess workpieces Roll width 200mm Width of the feeder with rolls to rolls 170cm Feeder length 255cm Number of cross conveyor belts 6 Variator-controlled feeder drives Can be used for four-sided planers and grinders

USED UNTHA SINGLE SHAFT SHREDDER 60 kw, Type LR 1400, rotor width 1.400 mm., speed 30/44, 2 x 22 kw drives, constructed in 2006, connected and running, Feed opening 1.400 x 1.050 mm, Constructors description: The strong throughput capacity of the LR1400 shredder is a result of the strong drive motors and the performance-oriented machine configuration. The configuration comprising a long rotor, a large perforated screen surface and optimised cutter geometry provides the performance which you require in your plant. High performance requires reliable machine operation, which we ensure with a full range of high-quality technological components., Thanks to the rotors special mounting, dust-protected bearings, tried and trusted gear damping and special cutting tools, the wood shredder is also very low maintenance and has a long service life. The intelligent drive control shuts the shredder mot ...

Universal like a handheld device, regardless of package size. If the daily volume of packages is limited, the M-PAC 3 comes into consideration. - For belts 5 – 15.5 mm wide, adjustable - 10 – to 20 strappings/min - Mobile, with lockable swivel castors - Package sizes independent - Adjustable working height - Weight: 50 kg The bandwidth depends on the weight of the package. From a weight of 20 kg, the width should be 9 mm. Attention: Belt rerouting by the operator! This is not a fully automatic machine!

Cardboard strapping, Mosca, RO-TR 5, fully automatic –used-: Price per piece ex location: only 3.950.-€ (net) Manufacturer: Mosca Type: RO-TR-5 Year of construction: 2010 Currently, the machines work with 9mm belts Channel width: approx. 72cm Channel height: approx. 54cm Nr.: 875 3L-N-PE 400V, / 3 AC 1.5 kW / 50 Hz 2.5 A Control Voltage: 24V, DC Condition: good Available: now Location: Hanau area

Good day! I would like to offer you the following machine: 1 used swivel spindle table milling machine T 150 Class - Spindle inclination -10° to +45° - Spindle diameter 30 mm - Spindle quick-change device with pneumatic release device - 5 interchangeable spindles 30 mm with a stand - Motorized height and swivel adjustment of the milling spindle - 5 speeds up to 10000 rpm. - 5.5 KW 380 volt motor - Operating pressure of the pneumatics 6 bar - Swivel segment for milling fence - Aluminium stop jaws with insert strips for continuous workpiece support - Infinitely adjustable table insert instead of table rings Adjustable from the outside, for the largest possible workpiece support - Extraction hood under table with nozzles 120 mm - Bow milling guard (unused) with suction nozzle 120 mm - Clockwise/counterclockwise rotation - Socket for  ...

3 pieces of cardboard strappers, Mosca, RO-TR 700-4, fully automatic –used-: Price per piece ex location: only 3.950.-€ (net) Manufacturer: Mosca Type: RO-TR 700-4 Year of construction: 2005 Currently, the machines work with 9mm belts Channel width: approx. 72cm Channel height: approx. 54cm No.: 80527 etc. 3L-N-PE 400V, / 3 AC 1.5 kW / 50 Hz 2.5 A Control Voltage: 24V, DC Condition: good Available: now Location: Hanau area

Various abrasive belts sold as is, without technical inspection

Used, heavy and high-performance recycling plant for the recycling of old cables. The machine has a granulator with a knife length of 500 mm and a large cutting table. As a result, the Sincro 530 from Guidetti achieves hourly outputs of 450 to 600 kg (manufacturer's specs). The system was traded-in by us and all essential components were checked in the workshop. The machine works reliably and trouble-free. On request, the system can be equipped with pre-shredders and conveyor belts. Feel free to visit us and get your own impression of the machine. You are also welcome to test the machine with your cable material.

ID2713 Feed hopper incl. take-off chute and conveyor belt Feed hopper including discharge chute and conveyor belt Feed hopper including discharge chute and conveyor belt, (1400 mm wide, approx. 110 m long), some straps are still available on a roll Feed hopper incl. take-off chute and conveyor belt (1400 mm wide, approx. 110 m long), belts are partly still available on rollers

Starting product :, car, 4x4, truck tyres, agri tyres max diam. 1.400 mm and max thickness 300 mm., Final product : 80 - 100 mm.chopped (for inceneration), 4 - 6 mm.crumbs, 2 - 4 mm.crumbs, 1 - 2 mm.crumbs, 0,5 - 1 mm.crumbs, 4 operators per shift, required space : about 45 x 25 mt., calculated on a 220 days/year 8 h/day = 7.040 T/year - 16 h/day = 14.080 T/year, Harmonized steel as a residual product., Average throughput rate of granulate : 4Ton/h in input, (throughput rate depends on feeding rate and on the kind of tires), installed power : about 900 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - automatic (45-50 tyres /h), for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.500 mm wide, transport belt, discs screen, transport belt, transport belt for fine material, transport belt to return oversized material to shredder, n.2 ...

Combined edge grinding machine LASM type LBK 200 3P with several work stations for different Grinding tasks., engine: 4 kW, oscillation: Yes, table: Tiltable, Included: new sanding belts

Standing sheet delivery M.Bäuerle SKM 36 A; cleaned and tested; new tapes; new drive belt; Max. Inlet width 360mm, min.50mm; height adjustable; Kicker. Small format vertical stacker M.Bäuerle SKM 36; cleaned and checked; new belts; new timing belt; max.infeed width 360mm, min.50mm; adjustable in hight; kicker.

Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...

Transnorm Belt Curve Conveyor left GKF 90°-780-600 IR600 both sides transmission RA2019 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 780 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed  ...

CELL COMPOSED OF: 2 MULTICONTACT GRINDING UNITS WITH 3 BELTS fully automatic with intelligent system, capable of maintaining the programmed working pressure constant. 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 2 KAWASAKI RS50N ROBOTS each having a wrist capacity of 50 kg. Each robot is complete with: _ANTI-SPARK PROTECTION on the wrist; _TICKET INSPECTOR; _PNEUMATIC SYSTEM.

SBF grading machine model 3W-586 1100mm with 3 belts: - 1st roller belt D=150mm in 90 shore rubber - 2nd roller belt D=200mm in 65 shore rubber - 3rd roller belt D=200mm in 45 shore rubber - pneumatic on/off of the 3 rollers, from the control panel - Rubber pressure rollers - automatic table positioner, with digital reader - Feed mat in good condition - 2 belt feed speeds - front and rear roller conveyor - total installed power KW 24 , volt 380 - year 1997 , CE standards AVAILABILITY FROM APRIL 2024

SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024 Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): 905.00mm Stroke of Upper Knockout: 50.00mm Stroke of Lower Knockout: 70.00mm Ram/Slide Width: 1320.00 mm Ram/Slide Height: 1100.00 mm Bed Width: 1340.00 mm Bed Depth: 1400.00 mm Power: 130kW Machine Length: 4055.00 mm Machine Width: 4000.00 mm Machine Height: 6710.00 mm Weight: 140000 kg Condition: like new refurbishing report: 1. Mechanical part • Complete disassembly of the press. • Measurement and troubleshooting of all parts. • The main parts of the press are tested (without destruction) in order to identify any defects. Frame: The frame was inspected and non-destructive testing of the most loaded areas was carried out. Damage to the table pl ...

Mori Seiki NL 2500 SMC. Year 2008. 5-axis machine. Subspindle. Turret with 12 stations, all of them motorized. C axis on both spindles. Integrated main head motor 18.5 KW. Integrated 11 KW sub-spindle head motor. Direct motor powered tools 5.5 kW. Engine starting torque 640 N/M. Motors without belts or steps. Main head size A2-8. Secondary head size A2-6. Bar pitch 80 mm. 250 mm main spindle plate with metric system. 170 mm subspindle plate with metric system. Prismatic guides on all axes. Main head speed 4,000 rpm. Motorized tools speed 6,000 rpm. Turning diameter 755 mm. Machinable diameter 365 mm. Machinable length 755 mm. Oil cooler for both Daikin heads. Mapps 4 conversational automatic scheduling system. Automatic effort control and tool consumption monitor. Rapid movement speed 30 m/min in the X and Z axis. Turret change indexin ...

Bandentschwarter Maja ESB 4434/1, with infeed and outfeed conveyor, with table for open use, year of construction 2013, with new pressure wheels, optionally with new belts, Connection 400V, dimensions LxWxH approx. 85x75x150cm, weight approx. 250kg, good used condition, fully functional

Used Depalletizer ACMI Stratos for 7000 b h for glass bottles This used depalletizer has been disassembled in September 2021 but is in perfect condition The floor space requirement for it is around 20 m2 complete with a table for round bottle alignment safety barriers and pallet conveyors This used depalletizer is automatic i e human intervention is only needed in the beginning to introduce the pallet of empty bottles into the appropriate space Only the cutting of the film that wraps the bottles and removing the plastic interlayer separator is required After this the machine picks up an entire layer of empty bottles and lifts them and moves them all together and deposits them on the connected automatic bottle extraction table This is all motorized and synchronized with the movement of the depalletizer during unloading In order to it is used to align the bottles coming out of the used dep ...

Used Linear Labeler PackLab Non Stop 2019 Built in 2019 Very little used therefore kept in excellent condition Nonstop function with two groups of wrapping labels Flexible self adhesive linear labeler for wrapping label application front and back Suitable for applying partial or wrap around body labels on cylindrical containers and partial front and back labels on shaped containers Achieves a production of 220 jars per minute therefore over 13 000 jars per hour Base with external labeling stations to give the operator more accessibility both during the work phases and during the format change N 2 labeling stations for each label to be applied with automatic interchange in the presence of end of reel breaking of backing paper lack of a label on the reel PLC type is Schneider with 5 inch touch screen The wrapping belts are motorized with speed regulation and with an encoder connected to th ...

Used Shrink Wrapper Zambelli LFT 30 S F Manufacturer ZAMBELLI Italia 2008 Model LFT 30 Capacity 30 packs min Working hours only 2 100 Packer is for PET bottles only 1 5 2 0 2 5 l packs 3 2 Not for smaller bottle volumes Packaging with foil without pad The machine is still connected Preserved in good condition General Description Machine for packaging in heat retractable material continuous movement no sealers Latest generation for medium and high production levels Maximum speed depending on machine model type of product and bundle to be formed Unique design features in this type of machine no mechanical parts on the operator side thus giving great accessibility mechanical parts grouped on opposite side to operator thus making all routine and non routine maintenance jobs simpler and faster Used Shrink Wrapper Great range of choice both in formats and versions Simple and very quick format  ...

Used Filling Line For Edible Oil In PET 1L Bottles Capacity 6 000 bph x 1 0 L Blow Molding Machine KOSME KSB 3000 2001 2 pcs x 3 900 bph Box for preforms with transport to the blower Compressor for cooling moulds MTA S R L 2000 KOSME bottle air conveyor 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper ICS Slovenia 1995 6 000 L h Labelling Machine Labeller ICS 1995 paper labels cold glue Conveyor belts ICS 1995 Packer in transport boxes 3 5 bottles ICS 1995 Shrink Wrapper Shrink wrapper SMIPACK packer in foil 2 5 bottles 2013 Pallet Wrapper Pallet wrapper ZLATOROG Slovenia 1999 Compressor KAESER low and high pressure compressors 2000 Refrigeration dryer There are spare parts worth It has complete technical documentation Required space for equipment 600 m2 Required installe ...

Used Case packing Monoblock brand Oma YOM 1996 2005 bph Monoblock Oma Brand components Case erector with single head packer It can make a case of 6 or a case of 12 bottles Safeguards Painted iron frame There are various formats Manufacturing year of the case packing triblock 1996 Production is about 450 cases per hour of 6 bottles There is no taping machine at the output of the case packing tri block to seal the upper and lower part of the case Thus motors must be used on case exit belts The case can then go to the taping machine to be closed from the bottom and top The taping machine must have a flap system that foresees the pre folding of the upper flaps to carry out a correct closure of the case On request we can create a correct layout customized to the needs of the buyer [...for more information send your inquiry to the seller.] refno: MBI11

Used Shrink Wrapper GIEMME model VEGA VE 20R91R year 2016 Vega lines work with centering of the print on the bundle with even higher performance and speed These lines include the latest mechanics new generation PLCs wide flexibility of use as well as rapid and precise format change It has the possibility of packaging products of small or medium dimensions on double or triple tracks Suitable for a wide variety of product types whether made from glass plastic cardboard or metal Some technical specifications To meet the various requirements the following have been created for the machine Channeling units for rectangular or square shaped products box overlay feeders bundle overlay clusters conveyor belts and roller conveyors on the exit of the bundler The main purpose of this type of machinery is to make the multipack this corresponds to packs of 6 bottles closed in a cardboard and then gath ...

Used filling monoblock FIMER 24 28 6s This wine filler has 24 rinsing clamps 28 GT filling nozzles and a 6 head Arol corking machine The machine has recently gone through complete maintenance It features also a vacuum pump and new water casings It has 6 different formats to fill different bottles of wine From 375 750 and 1500 The rinser stations have a simple system for letting water into the bottle and use single treatment The pitch of the used filling monoblock allows the processing of bottles up to 1 5 L making it very versatile Specifications The still wine filler works with slight depression and therefore fills non carbonated liquids These can be still wines or non carbonated soft drinks juices if their maximum thickness doesn t exceed about 18 The capper is a straight cork suitable for the diameter 28 necks The still wine filler on the underside of the gears is functional No partic ...

Used overhauled Compressor Siad Low and High pressure System for 1850 CBM Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022 like new and ready for delivery Machine has 1850 CBM of power Complete replacement of the Baty and replacement of bands bearings gaskets valves ATLAS Copco ZR4 screw overhaul with replacement of air filter oil filter and vapor filter ACS Z oil shuttle KIT intake KIT exhaust silencer filter flexible coupling replacement greasing of engine bearings and general compressor control The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need The machinery is guaranteed a 12 month or 2000 hour warranty on all replaced components Only HP LP tank and dryer need to be added The two machines Booster equipment and LP compressor Atlas were purchased by the same company where they increased its compres ...

Used Krones Filling Line for Flat Drinks in Glass 1997 Manufacturer KRONES Bought new and installed in 1997 It fills juices syrups alcohol Accessories for bottles 0 2 0 7 1 0 L Capacity 4 000 L h Monoblock frequency regulator Rinser for glass bottles Vacuum filler Krones Capper with Al MCA 28 caps Labeller KRONES Binetta with precut paper labels hot glue One label up to half the extent of the bottle with a possibility for neck accessories The control unit replaced in this Krones line There are some conveyor belts in the Krones plant The equipment has relatively few operating hours It has been disconnected for the last 5 years and stored [...for more information send your inquiry to the seller.] refno: LC328

Modular labeling machine 10 heads Modular labeling machine Cold glue 4 stations Front back seal L neck ring self adhesive 3 stations Front back neck ring Bottles round square Label stations nr N 3 self adhesive stations N 3 Cold glue stations Central diameter 960 Plates nr 10 Length of the labels min max 10 150 Height of the label min max 15 200 Container diameter height min max 30 80 mm Altezza min max 100 400 mm Plate transmission Motorized plate Optical centering Yes Special inlet stars No 3 multi format in out stars D 50 120 mm Industria 4 0 yes predisposed other request Double screw input in phase Max speed request 6 500 bph Modular labeling machine basic machine composition 1 System built according to CE regulations 2 Machine operation via PLC Schneider 3 Touch screen control panel for labeler functions installed on a mobile and rotating support 4 Automatic variation of production  ...

Kosme Used Complete Bottling Line for Juice and Milk 2006 If you are looking for a complete bottling line for your dairy or juice products look no further than the Kosme Used Complete Bottling Line for Milk 2006 This high quality bottling line was previously used by Kosme to bottle milk in 2006 and features state of the art equipment from leading manufacturers like Kosme Krones and Mariani It can also be used to bottle edible oil in PET with neck 38 this is because the filling system is by weight and therefore allows you to have this possibility At the filler output there is a weight control system which guarantees the correctness of the filling The Kosme Used Complete Bottling Line for Milk runs clockwise and includes a preform tipper and preform orientation elevator for efficient preform handling The line also features a KOSME KSB 4L blow molding machine that can handle 1LT and 1 5LT c ...

Used Pasteurizer PG 2008 NR 01 all stainless steel pasteurizer rain cooler with PG intralox mesh complete with no 03 tanks for water recovery with relative pumps Overall dimensions useful length mm 13 500 net width 2000 mm The machine is equipped with infeed and outfeed belts for cans or pots steam regulation group stainless steel hood for steam outlet complete with stainless steel electrical panel and all its accessories for operation The machine was built to process tomato puree in 720ML bottles it is not equipped with an exchanger is equipped with a recorder [...for more information send your inquiry to the seller.] refno: PST16

Used compressor Siad Tempo 2004 Full maintenance in early 2022 2000 working hours of autonomy until the next routine maintenance deadline for this Siad HP compressor 1500 HP compressor OIL FREE AIR COMPRESSION UNIT with a capacity of 1500 m h having the following main working data gas to be compressed air electric feeding 380 V 5 50 Hz Suction conditions altitude 500 m s l m temperature min max internal 10 35 C temperature min max external 5 45 C relative humidity 50 wet bulb 26 C Delivery Conditions max pressure 42 bar output at suction conditions 1500 m h pneumatic part working dry rotation speed 750 rpm average piston speed 3 75 m sec electric motor 4 poles installed power 315 kW shaft power 270 kW electric motor execution IP 23 coupling V belts cooling water T inlet outlet water 10 C approx approx water requirement 27 m h Structural features of the Used compressor Siad The pneumatic  ...

Modular labeling machine 14 heads cold glue adhesive 8000 14 000 BPH This New modular labeling machine can be customized as needed Suitable for applying labels COLD GLUE AND ADHESIVES GLUE collar GLUE back U or L seal ADHESIVE front ADHESIVE back Bottles Containers CYLINDRICAL and SHAPED No labeling stations No 3 COLD GLUE groups N 2 adhesive groups 60 meters ON THE MODULAR TRAY Head diameter 960 mm Plates number 14 Min max label length 10 150 Min max label height 15 200 Container diameter height min max 30 80 mm Height 100 400 mm Max required speed 8 000 bph Basic machine composition 1 System built according to CE regulations 2 Machine operation via PLC Schneider 3 Touch screen control panel for labeler functions installed on a mobile and rotating support 4 Automatic variation of production speed with inverters and detection sensors installed on the conveyor belts 5 Light column indicat ...

Used complete spirits line up to 8000 bph 1 Used depalletizer ACMI Stratos 8000 bph The Stratos depalletizer of the used complete spirits line up to 8000 BPH produced by ACMI in 2003 is a technologically advanced device designed for the bottling industry With an operating capacity of 8000 BPH it operates in the used equipment for spirit with an automatic mode ensuring high efficiency in the bottle introduction process The machine despite having been dismantled in September 2021 is preserved in excellent condition It features crucial features such as a flap removal system and pallet storage capabilities An important feature of the Stratos depalletizer is its size of approximately 20 m2 By integrating a specific table for the alignment of round bottles safety barriers and pallet conveyor belts Human intervention in this used complete spirits line up to 8000 BPH is limited to the initial st ...

CONVEYOR BELTS, with METAL DETECTORS or OVERBELT METAL SEPARATORS, top quality and sustainable prices, Size and characteristics bespoke to the project., Ask for more information

Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length ...

Fritsch Rollfix Model: 30WK650 Rollfix Manual dough sheeter for all doughs for rolling out and touring Stainless steel with manual and foot gear Belt width 650 mm Bottom table with printing board with tow for impact for long scooters Infinitely variable roller adjustment New belts and wiper blades Machine mobile with 2 brakes DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled 6 months warranty Many more TOP sheeters in stock!