british flag
Resale Logo

belt used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information engines and gears  Motoren Steffens GmbH  http://www.motoren-steffens.de 
banner logo
start page > keywords belt > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465456 104

GRIT GU150ES2H for sale
Band Grinding Machines


- grindable pipe diameter up to 150mm - cross adjustment of support - adjustable depth stop - mitre grinding 30° to 90° - grinding belt dimensions 2000 x 150mm - surface grinding opening 300 x 150mm - contact pla ...
used machine
 
- grindable pipe diameter up to 150mm
- cross adjustment of support
- adjustable depth stop
- mitre grinding 30° to 90°
- grinding belt dimensions 2000 x 150mm
- surface grinding opening 300 x 150mm
- contact plate B 150 / D 200mm
- pulley B 150 / D 200mm
- grinding belt speeds 15 + 30m/min
- drive 400 V / 2.6 + 3,1kW

special equipment:
- pneumatic feeding accessory GU RA
- contact role 1 inch / 1 1/4 inch / 1 1/2 inch
- suction
2001
Price  
    request
125517822 903

NEW HOLLAND Roll-Belt 150 764 Baler for sale
Round baler New Holland Roll-Belt 150 764 Baler


Round balers are designed for bales of grass or hay. The picking of the spoil takes place from the swath with a pick-up and the machine is driven from the farm tractor via a power take-off. Complete machine in good condi ...
used machine
 
Round balers are designed for bales of grass or hay. The picking of the spoil takes place from the swath with a pick-up and the machine is driven from the farm tractor via a power take-off. Complete machine in good condition.
2015
24,950 EU?  
  PL   request
125465449 1200

KLEIN BS 20 for sale
Belt Filter Press


Bandwidth: 2000 mm Access.: Control cabinet Polymer system Pump Technical documentation and circuit diagram
used machine
 
Bandwidth: 2000 mm
Access.:
Control cabinet
Polymer system
Pump
Technical documentation and circuit diagram
1987
Price  
  AT   request
125516709 1101

Sunbelt Transformer - 2500 kVA - DPX-10518 for sale
Diesel Generators


Size: 20ft container
used machine
 
Size: 20ft container
2005
12,500 €  
  NL   request
125465440 1200

ROMPF KRF 1700 for sale
Belt Filter Press


Bandwidth: 1700 mm Throughput: Approx. 5 - 12 m3/h Scope of delivery: Control cabinet Powder polymer system Transverse conveyor 2 Eccentric screw pumps The belt filter press is dismantled and immediately available ...
used machine
 
Bandwidth: 1700 mm
Throughput: Approx. 5 - 12 m3/h
Scope of delivery:
Control cabinet
Powder polymer system
Transverse conveyor
2 Eccentric screw pumps
The belt filter press is dismantled and immediately available.
1986
Price  
  DE   request
125509632 212

DICOMA for sale
Film Packaging System


Weight approx.: 3000 kgDimensions (l x w x h) approx.: 13000 x 2600 x 2000 mmDescription: Consisting of an infeed roller conveyor, belt width approx. 1200 mm, film winding station, passage width approx. 1600 mm, passage  ...

 
Weight approx.: 3000 kg
Dimensions (l x w x h) approx.: 13000 x 2600 x 2000 mm
Description: Consisting of an infeed roller conveyor, belt width approx. 1200 mm, film winding station, passage width approx. 1600 mm, passage height max. 500 mm, with various film magazines and welding bars for welding of the film, further transport to drying tunnel DICOMA, 2 fans, tunnel length approx. 3000 mm, passage width approx. 1500 mm, discharge roller conveyor, total length approx. 3500 mm, roller width 900 mm
 
used machinery auction RESALE 650 €  
  ES   request
125465341 2404

MOBIL-KRANWAGEN ÖAF Gräf & Stift for sale


last off Code: BH-82028 First registration: 17.07.1981 FIN: 6970353 elapsed. Mileage: 397.141 km power: 285 kW Displacement: 12.763 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to &A ...

 
last off Code: BH-82028
First registration: 17.07.1981

FIN: 6970353
elapsed. Mileage: 397.141 km power: 285 kW
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 20-320 G6-LTMF1
Equity / total weight: 23.050/23,400 kg
Color: grey
Equipment: Cloth - and leather interior with rear-mounted on Liebherr crane cab model LTMF1030V, serial number. 0011621, YEAR 1981
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, v-belts, hydraulic blower leaking, MA oil loss, Wishbone broken MA, VA pushrod defective, Luftpresser poor performance, articulated wheel rim on several points touched on, lights broken heater is to examine, hydraulic pump leak, leakage of crane hydraulics, various paint damage all-round vehicle as well as dents and rust, holes with rust spots behind passenger door front right,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0041 and 3950-0-400-0199
 
Price  
    request
125509377 1900

BIELE for sale
Driven Belt Conveyor


Weight approx.: 2000 kgDimensions (l x w x h) approx.: 21000 x 950 x 1050 mmDescription: 5 pieces, Working height 510 mm, 3 x pieces with useful belt dimensions 4000 x 500 mm, 2 x pieces with useful belt dimensions 4500  ...
used machine
 
Weight approx.: 2000 kg
Dimensions (l x w x h) approx.: 21000 x 950 x 1050 mm
Description: 5 pieces, Working height 510 mm, 3 x pieces with useful belt dimensions 4000 x 500 mm, 2 x pieces with useful belt dimensions 4500 x 500 mm, Driven by motor with power 0.55 kw each piece, Height adjustable, Separated electric cabinet
2002
used machinery auction RESALE 750 €  
  ES   request
125456378 1200  

ALFA-LAVAL BRPX 417 for sale
Self-Cleaning Disc Separators


BRPX 417: high speed vertical disc centrifuge Made from stainless steel for the food and beverage industry. Approximate capacity: 10000 liter/hour The bowl is mounted on a vertical spindle driven by a vertically mounted  ...
used machine
 
BRPX 417: high speed vertical disc centrifuge Made from stainless steel for the food and beverage industry. Approximate capacity: 10000 liter/hour The bowl is mounted on a vertical spindle driven by a vertically mounted motor, via a belt drive
ELECTRICAL CABINET AVAILABLE
2 UNITS AVAILABLE
 
25,000   
  RO   request
125509896 409

REISOPACK EXS-206 for sale
Strapping Machine


Weight approx.: 80 kgDimensions (l x w x h) approx.: 900 x 570 x 900 mmDescription: Tabletop approx. 900 x 565 mm, for plastic belts, with welding unit

 
Weight approx.: 80 kg
Dimensions (l x w x h) approx.: 900 x 570 x 900 mm
Description: Tabletop approx. 900 x 565 mm, for plastic belts, with welding unit
 
used machinery auction RESALE 100 €  
  ES   request
125452391 107

GRANDINI LTCM 15 for sale
SLITTING- AND CUT TO LENGTH LINE 1.500 x 2/2,5 mm


Band width max. / strip width Max: 1.500 mm belt thickness Alumax. / strip thickness alu maximum: 2.5 mm Band thickness steel Max / strip thickness 2.0 mm steel(42kg/CM2): Line speed/line speed 20 m / min Coil weight/ ...
used machine
 
Band width max. / strip width Max: 1.500 mm belt thickness Alumax. / strip thickness alu maximum: 2.5 mm
Band thickness steel Max / strip thickness 2.0 mm steel(42kg/CM2):
Line speed/line speed 20 m / min
Coil weight/coil weight: 5to.
Coil inside diameter/coil inner dia.: 460-508 mm
Coil-AuÃ?endruchmesser/coil outer dia: 1,600 mm
Stacking device/stacking unit: 1,500 x 6,000 mm
Package height approx. / pack geigh about: 400 mm / 5 tons.
Overall performance Motors / motor total power: 14 kW, 380 V, 50 Hz.
Air pressure air pressure: 6 bar
Space required/space requirements: 17 x 5 m

Material: Aluminum, steel, galvanized, painted band, others / aliminium, steel galvanized, perpainted, others
2002
Price  
    request
125509130 212

LEIZA for sale
Automatic Commissioning Plant


Weight approx.: 4000 kgDimensions (l x w x h) approx.: 33000 x 1400 x 1000 mmDescription: Consisting of conveying system with a total length of 33000 mm, continuous belt conveyor, belt width approx. 550 mm, 7 cross conve ...

 
Weight approx.: 4000 kg
Dimensions (l x w x h) approx.: 33000 x 1400 x 1000 mm
Description: Consisting of conveying system with a total length of 33000 mm, continuous belt conveyor, belt width approx. 550 mm, 7 cross conveyors for separating the goods, each with light barrier
 
used machinery auction RESALE 500 €  
  ES   request
125452223 843

STOCK Type 14R6/1500 P_S for sale
Stock Type 14R6/1500 P_S Laminating machines


Sheet laminating machine - year 2005 Sheet suction group - M7 (Mabeg) - year 2016 press belt - year 1995 packet turner - year 1995 stacker - year 1995
used machine
 
Sheet laminating machine - year 2005
Sheet suction group - M7 (Mabeg) - year 2016
press belt - year 1995
packet turner - year 1995
stacker - year 1995
2005
Price  
    request
125509898 409

REISOSA 14 for sale
Strapping Machine


Weight approx.: 100 kgDimensions (l x w x h) approx.: 1300 x 600 x 2100 mmDescription: For plastic belts, with welding unit, tabletop approx. 900 x 600 mm, portal height approx. 1115 mm

 
Weight approx.: 100 kg
Dimensions (l x w x h) approx.: 1300 x 600 x 2100 mm
Description: For plastic belts, with welding unit, tabletop approx. 900 x 600 mm, portal height approx. 1115 mm
 
used machinery auction RESALE 100 €  
  ES   request
125451848 109

AEROTERM ULTRATERM UV 1100 for sale
Painting Line


Tunnel AEROTERM ULTRATERM UV 1100 was manufactured in 2002. The tunnel is designed for fixing UV inks and varnishes. It is equipped with an independent air circulation, which holds the forms when passing under the lamp.  ...
used machine
 
Tunnel AEROTERM ULTRATERM UV 1100 was manufactured in 2002. The tunnel is designed for fixing UV inks and varnishes. It is equipped with an independent air circulation, which holds the forms when passing under the lamp. In the tunnels dichroic mirrors, quartz filters and focus of the rays are used, thanks to which the drying temperature is significantly reduced. Thanks to the use of mirrors and filters, you can dry even thin foils.

Characteristic parameters of the AEROTERM ULTRATERM UV 1100 tunnel:
- working width: 1100 mm
- material thickness: 0.15-50 mm
- speed: 5-30 m / min.
- number of hours of filaments worked: approx. 300 h
- lamps: 6 filaments 120 W / cm (can work in 60 W / cm mode)
- extraction of vapors / ozone
- conveyor belt on the vacuum table
2002
6,875 €  
  PL   request
125510412 409

DICOMA for sale
Packaging Line with Shrink Tunnel


Weight approx.: 3000 kgDimensions (l x w x h) approx.: 8350 x 2200 x 1800 mmDescription: Max. workpiece width approx. 1150 mm, Max. workpiece height approx. 320 mm, Parts of line: 1 x Shrink plastic cutting and welding s ...

 
Weight approx.: 3000 kg
Dimensions (l x w x h) approx.: 8350 x 2200 x 1800 mm
Description: Max. workpiece width approx. 1150 mm, Max. workpiece height approx. 320 mm, Parts of line: 1 x Shrink plastic cutting and welding station input belt table length 2100 mm, 1 x driven belt conveyor length 2100 mm, 1 x Oven for shrink plastic machine, Tunnel length 2500 mm, For more details see the photos
 
used machinery auction RESALE 1,000 €  
  ES   request
125451836 209

SCM SANDYA UNO CS for sale
WIDE BELT SANDER SCM SANDYA UNO CS


Wide belt sanders Scm Sandya UNO CS working width mm. 900 nr. 2 units I° calibrator unit II° combinet roller/pad motor power KW 7,5 rpm 2800

 
Wide belt sanders Scm Sandya UNO CS
working width mm. 900
nr. 2 units
I° calibrator unit
II° combinet roller/pad
motor power KW 7,5 rpm 2800
 
Price  
  IT   request
125508890 204

CASADEI LIBRA 6 RRRT 135 for sale
Wide-Belt Sander


Weight approx.: 5500 kgDimensions (l x w x h) approx.: 2300 x 3150 x 2300 mmDescription: Total power 100 kw, Working width 1350 mm, Steel Roller, 2 Rubber Roller, Sanding shoe unit
used machine
 
Weight approx.: 5500 kg
Dimensions (l x w x h) approx.: 2300 x 3150 x 2300 mm
Description: Total power 100 kw, Working width 1350 mm, Steel Roller, 2 Rubber Roller, Sanding shoe unit
1998
used machinery auction RESALE 4,800 €  
  ES   request
125436772 204

JOHANNSEN T85 for sale
Long belt sander


Table size: 2,800 mm x 950 mm, motor: 5.1 kW.

 
Table size: 2,800 mm x 950 mm, motor: 5.1 kW.
 
Price  
    request
125510180 205

KOCH BD 60 B NC for sale
CNC Drilling and Dowel Insertion Machine


Weight approx.: 5000 kgDimensions (l x w x h) approx.: 6000 x 6000 x 2500 mmDescription: Serial number A 0512/7348, Total installed power 20 kw, Feeding by belt, Maximum workpiece dimensions approx. 2400 x 715 x 20 mm, M ...
used machine
 
Weight approx.: 5000 kg
Dimensions (l x w x h) approx.: 6000 x 6000 x 2500 mm
Description: Serial number A 0512/7348, Total installed power 20 kw, Feeding by belt, Maximum workpiece dimensions approx. 2400 x 715 x 20 mm, Minimum workpiece dimensions 265 x 240 x 12 mm, 2 x horizontal drilling heads from right side with 8 spindles each, 2 x horizontal drilling heads from left side with 8 spindles each, 2 x vertical drilling heads from below-right side with 3 spindles each, 2 x vertical drilling heads from below-left side with 3 spindles each, Chip collection system, Inserting dowel station with 6 heads on each side, For dowels with diameter 8 mm and length from 30 mm up to 40 mm
2005
used machinery auction RESALE 3,500 €  
  ES   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More BELT models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Belt Filter Press Rompf KRF 1700


Bandwidth: 1700 mm Throughput: Approx. 5 - 12 m3/h Scope of delivery: Control cabinet Powder polymer system Transverse conveyor 2 Eccentric screw pumps The belt filter press is dismantled and immediately available.

Self-Cleaning Disc Separators Alfa-Laval BRPX 417


BRPX 417: high speed vertical disc centrifuge Made from stainless steel for the food and beverage industry. Approximate capacity: 10000 liter/hour The bowl is mounted on a vertical spindle driven by a vertically mounted motor, via a belt drive ELECTRICAL CABINET AVAILABLE 2 UNITS AVAILABLE

Granulating mills PREVIERO MU-710 P.R.


PREVIERO GRINDER TYPE MU-710 PR complete with conveyor belt and metal detector closed rotor Grinding chamber : mm.1000 x770 Feeding hopper : 1170 mm x 900 mm 160 kW Motor 6 knives on rotor + 2 knives on stator grid with 14 mm drilling Inspection door for knives replacement Output 2000/2400 kg / h depending on material and grid Electric cabinet Offered completetely reconditioned in 2018 Construction year 1989

Painting Line AEROTERM ULTRATERM UV 1100


Tunnel AEROTERM ULTRATERM UV 1100 were produced in 2002 year. The tunnel is designed to persist the paints and varnishes. It is equipped with independent air circulation, which holds the spring core at the time of the transition under the lamp. In the tunnels uses dichroic mirrors, filters, quartz and focus the rays, so drying temperature is significantly reduced. Through the use of mirrors and filters can be dry even thin films. Characteristic parameters of the tunnel AEROTERM ULTRATERM UV 1100: -working width: 1100 mm -material thickness: 0.15-50 mm -speed: 5-30 m/min. -the number of hours worked of the filaments: ok. 300 h -lamps: 6 filaments 120 W/cm (the ability to work in 60 in/cm) -fume extraction/ozone -conveyor belt on vacuum table

WIDE BELT SANDER SCM SANDYA UNO CS SCM SANDYA UNO CS


Wide belt sanders Scm Sandya UNO CS working width mm. 900 nr. 2 units I° calibrator unit II° combinet roller/pad motor power KW 7,5 rpm 2800

Cooking cupboards Meyn Fryer BR5000/400


1 x Meyn fryer. Type - BR5000/400. 400mm wide belt. Frying length - 5000mm. Comes with hold down belt, hydraulic lifting for belts and cover, MC control, thermo-oil heated, oil tank and fire-fighting equipment. Located in Germany.

Double Miter Saws Abcd Machinery 2015


SELECTA 3 - Double head cutting off machine Home / ABCD Machinery – Machines for processing Aluminum Steel and PVC / SELECTA 3 – Double head cutting off machine SELECTA 3 High quality double head cutting off machine with a fixed sawing head on the left and automatic right head movable by numeric control with upstroke blades. Rotation and tilting of both blades for compound cuts. Brushless motor for the positioning of the movable head. Automatic pivoting inwards/outwards heads by brushless motor 22,5°90°-140°. Automatic tilting range inwards of the saw blades 90°-45°, with 2 TCT Saw blades Ø600mm. Motor power 3Kw each, lubrication by micro drop with pure oil, full protections, cutting areas with automatic raising/closing safety head, kit vertical pneumatic clamps, software of the machine completely graphical-colour display Touch screen video. 17’’Wide extension thanks to the gates RJ45-USB it allows the possibility to manage different typologies of windows with image memory for direct use. Ethernet connection to the main office or with other programs or connections with other CNC machines. Possibility of tele-assistance via . CUTTING LENGTH 6 MT. STANDARD EQUIPMENT Unlimited memorizing of cutting lists via keyboard, USB key Management expanding capacity of cut on length Management reducing capacity of cut on length Auto-feed and cut off saw (point to point) Movable roller table support with vertical stop 4x vertical pneumatic clamps Electric device for connecting motorized belt conveyor Electric device for connecting industrial vacuum Lubrication by micro drop with pure oil Full protections cutting area 2x TCT Saw Blades Ø600mm MACHINE JUST USED 3 MONTHS. PERFECT CONDITION. 5*AXIS CONTROLLED.

HP Belt Assy fuer DesignJet 4000-4520 HP Q1273-60228


HP - Carriage Belt fuer Designjet 4000,4020,4500,4520 HP - Nr. Q1273-60228 / Original HP / Neu abc.designjet-parts

Monarch-Scalvos Protti good models excellent conditio


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra 10 Monarch FIM 108A, 30", 24 cut, 108 feed 1 Monarch FDR Rib, 26", 14 cut, 52 feed 3 Monarch Rib, 26", 14 cut, 52 feed, Lycra 1 Monarch Rib, 20", 14 cut, 40 feed 1 Monarch SEC Electronic Striper, 30", 16 cut, 36 feed 6 Monarch FXC4S, 30', 20 cut, 122 feed 4 Monarch RACE, 30", 28 cut, 122 cut 1 Monarch STEP JACK, 30", 20 cut, 72 feed 14 Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut, 24 Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut, 7 Monarch FXC 4S, 26", 20 cut, 104 fd. 6 Monarch RX4S, 26", 20 cut, 104 fd. 8 Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut FLAT KNITTING 2 Protti PV94 Doublelock, 240 cm, 12 gauge 6 Protti PT222, 213 cm, 12 cut 9 Protti PT242 Jacquard, 218 cm, 12 cut 35 Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge DYEING 1 Gaston Jet Dye, 80 lb., 1996, M6000 Controller 4 Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15 3 Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987 1 Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller 4 Recore Dye Machine Controllers, 2012-14 6 Then Airflow, 1200 lbs., 3 strand/3 ports, 1988 1 Then Airflow, 400 lbs., 1 port, 1987 3 Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80 1 Arganthan Jet Dye, 400 lbs., 60 PSI, 1982 11 Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980 7 Gaston 824 Jet Dye, 5-3 port, 2-2 port 200 Stainless Mixing Tanks with mixers, 50 to 250 gal. 200 Dyehouse Trucks, 72" x 42" wide x 35" dp. FINISHING 1 Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994 1 Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR 1 TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders 1 Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel 1 Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder 1 Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones, 1 Krantz Syncro Shrink Conveyor Dryer, 100" wide belt 2 Famatex Tenter #1 & #2 3 Tube Tex Drum Dryers, 48" wide & 72" wide 1 Fabcon Drum Dryer, 8 zone 5 Tubular Inspection machines 6 6 Fabcon Tubular Gullwing Tubular Compactors, 52" wide Fabcon & Tubetex Tubular Calendars, 50" & 60" wide 1 Argathen Bleach Range, 10 section, 2200 lbs. hour. 1 Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995 1 Curtis & Marble, plastic roll wrapping 1 Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale 1 Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders 1 1 Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990 Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher 1 LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS 25 Merrow Sewing Machines, with table and motor 2 Gardner Denver Air Compressor, 60 HP 1 Gardner Denver Air Compressor, 200 HP 3 Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP 3 Propane Storage Tanks, 30,000 gallon, with mixer 4 Stainless Steel Outside Tanks, 6000 gal to 10,000 gal. 3 Waste Balers, vertical style 2 Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system PLEASE CONTACT US FOR FURTHER INFORMATION .

HP Carriage Belt fuer Designjet 450 / DIN A-0 HP C4706-60082


HP - Carriage Belt fuer DesignJet 230,250,330,350,430,450,455,700,750 HP - Nr. C4706-60082 abc.designjet-parts

HP - Carriage Belt DIN A-1 DesignJet 450 HP C4705-60082


HP - Carriage Belt fuer Designjet 230,250,330,350,430,450c,455 HP - Nr. C4705-60082 / DIN A-1 abc.designjet-parts

HP Carriage Belt fuer DesignJet 1050/1055 HP C6072-60198


HP - Carriage Belt fuer DesignJet 1050-1055 HP - Nr. C6072-60198 abc.designjet-parts

CNC Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Self-Cleaning Disc Separators Alfa-Laval BRPS 617


Stainless steel construction. Max bowl speed 4900RPM, . Clarifier design, centripetal pump liquid discharge. It is used for removing suspended solids with particle sizes from approximately 0.5 to 500 ?m from a liquid having a lower specific gravity than the solids. The solids content in the feed is normally in the range of 0.1-10 % by volume, but can vary between different duties 37KW DRIVE MOTOR , BELT DRIVE ELECTRICAL CABINET AVAILABLE

Self-Cleaning Disc Separators ALFA-LAVAL BRPX 417


Alfa-Laval Self-Cleaning Disc Separators for the food and beverage industry , high speed vertical disc centrifuge Made from stainless steel for the food and beverage industry. Approximate capacity: 10000 liter/hour The bowl is mounted on a vertical spindle driven by a vertically mounted motor, via a belt drive

Metal detector Gelan Safeline


Product number: 1260 Serial number: 8282 Year of construction: 1994 Belt width: 345 mm Passage: 400 x 230 mm Dimensions: 1640 x 1250 x 1200 mm With reject (pusher)

Numerically Controlled Machining Centres BIESSE ROVER C6.65R


Machining centre Biesse Modello Rover C6.65 R Software BIESSE WORKS Working field X mm 6200 Working field Y mm 1535 Working field Z mm 250 Work table with automatic adjustment of bars supports and sucker holder carriages 08 working areas 10 bar supports with 4 sucker holder carriages 40 Uniclamp sucker holder carriages Suction cups included: 06 of mm 140x75 20 of mm 140x140 10 of mm 140x55 18 Fittings blocks 01 Electro-spindle at 4 axels of 12 kW 01 boring head 22 spindles composed by 13 vertical spindle + horizontal spindle + 1 blade 03 Multi-function heads composed by: 01 Saw blade unit diameter mm 300 01 Boring unit at 6 counterposed bits 01 Milling unit at 2 exits Automatic chain Tool change at 22 positions installed on the machine Depression plant with vacuum pump of 250 m3/h Automatic centralized lubrication Shaving evacuation belt

Wide Belt Contact Grinding Machine VERBOOM BBB-600/2


Working width: 620mm, grinding height: 160mm, speed: 25m/s, grinding belt dimensions: 1900x620mm, max. feed: 16m/min.

Cutters and vacuum cutters Marel Portion cutter I-cut


Marel portion cutter, type I-Cut 55 from 2012 in a superb condition. This single lane boneless meat portion cutting machine with 3D 360 grades laser scanning for product measurement to facilitate cut to fixed length and/or weight, rotating knife, hold down stabilisation belt and 10" Omron colour touch screen. Maximum product size 950 x 300 x 180mm, maximum product weight 10kg, with , manuals and spare blade. Stainless steel 304 construction

LATHE HORIZONTAL DAEWO0 PUMA 240 LC


CNC: FANUC Oi- TB YEAR: 2006 CORSE X 242 mm - 680 mm Z Ø Swing over bed mm 420 rotating diameter 400 mm on the wagon rotating over bed mm 570 turnable chuck Length 648 mm spindle speed 3500 aSA A2-8 hydraulic turntable 3 jaws std 254 mm 18.5 to 22 kW motor power STRUCTURE BANCALE INCLINED AT 45 ° CAST IRON ABOUT WEIGHT KG 5740 TOWER TWO-WAY AUTOMATIC 10 tool stations TAILSTOCK tailstock quill in attack cycle vices 4 diameter tube mm diam 75/80 boost pressure 40 bar 660 kg PRESETTING TOOLS DESCENT / ASCENT AUTO (WITH BUTTON AND CODE M) AUTOMATIC LUBRICATION SYSTEM COOLING SYSTEM HIGH PRESSURE 6 BAR COLLECTION TANK COOLANT 240 LITER TRANSPORTER shavings BELT WITH EXIT ON THE RIGHT CABINET ON UNIT WITH COOLER HALOGEN LIGHTING ZONE WORK LAMP YELLOW ALERT AND END OF CYCLE "CE" in the rules.

Automatic wide belt sander with 2 belts SBF ING STEFANI RR 970


Code: 0359 Brand: SBF ING STEFANI Model: RR 970 Automatic wide belt sander with 2 belts ( Roller + Roller ) for solid wood, veneer. panels , thin strips of wood, and various materials Technical data: Working width mm 970 1° Group rubber Calibrating Roller diameter mm 140 2° Group rubber Sanding Roller diameter mm 140 Belt size mm 1900 x 940 Motor Hp10 Automatic table lifting Electronic position indicator Automatic table positioning Belt feed with 2 speeds Infeed and outfeed roller conveyor Overall dimensions: mm 1600 x 1500 x 2200 h

Cutting-To-Length Lines FIMI


band width 100 – 1.300 mm band thickness 0,30 – 3,00 mm tensile strength (until 2,2 mm thickness) max. 1.000 N/mm² yield strength (until 2,2 mm thickness) max. 820 N/mm² tensile strength (until 3,0 mm thickness) max. 800 N/mm² yield strength (until 3,0 mm thickness) max. 650 N/mm² elongation max. 20 % coil weight max. 30,0 t coil inside – Ø 508 / 610 mm coil outside – Ø 600 – 2.100 mm sheet length 250 – 3.000 mm package weight max. 5.000 kg package height incl. palette max. 560 mm inlet speed 15 m/min. working speed max. 90 m/min. pass line height app. 1.100 mm working direction left ? right the line consists of: stocking ramps for 2 coils min. coil outside diameter 900 mm entry coil car centering device decoiler motorized mandrel – Ø 508 / 610 mm press roll motorized outboard bearing Support coil opener telescopic press roll strip centering device crop shear – hydraulically scrap box transfer table leveler 6 HI 2 cassettes with leveling rolls cassette 1: no. – leveling rolls 19 leveling roll diameter 43 mm cassette 2: no. – leveling rolls 19 leveling roll diameter 52 mm no. – back up rolls 5 sets, upper and lower cassette quick change device felt cleaning device tachometer wheel pinch roll at shear entry rolls driven by DC motor rotary shear VECTRONIC pinch roll driven by AC motor strip belt conveyor at the VECTRONIC shear exit place for oiling machine (customer’s supply) sheets conveyors to scrap carriage and stackers deflecting conveyor with 3 positions scrap box movable by AC geared motor scrap carriage for scrap length of max. 1.100 mm connecting conveyor to stacker 1 connecting conveyor to stacker 2 automatic stacker units: stacker 1 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets stacker 2 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets lifting stacking platforms 2 pieces for sheets up to 3.000 mm length hydraulic hydraulic oil pressure 120 bar pneumatic normal compressed air pressure 6 bar electric three phase voltage 380 ± 10% V, 50± 2 Hz auxiliary voltage 220 ± 10% V, 50± 2 Hz solenoid valve voltage 24 V DC. total power consumption 480 KVA

Metal detector Gelan/Safeline Safeline


Product number: 1259 Serial number: 13432 Year of construction: 1995 Belt width: 350 mm Passage: 400 x 155 mm Dimensions: 1380 x 1330 x 1120 mm With reject (pusher)

Metal detector Loma 7000


Loma Model: 7000 metal detector checkweigher Serial: ECB1101424575 2001, stainless frame, Aperture 330mm x 120mm, belt width 200mm, overall length 2500mm, weigh bed 400mm x 250mm, with pneumatic rejects and bins

Metal detector Safeline Signature


Safeline Model: Signature Metal detector Serial: 47525 stainless frame, aperture 320mm L x 200mm W, belt length 2400mm, pneumatic push arm reject with bin, product counter

Metal detector Garvens S2


Garvens Model: S2 checkweigher Serial: 321601 2003, stainless frame, weigh bed 220mm x 180mm, total length 1000mm, pneumatic belt reject, with printer

Metal detector Safeline Signature


Safeline Model: signature Metal detector stainless mobile frame, aperture 320mm L x 200mm W, belt length 1850mm, pnuematic arm reject with bin

Carton closing machines Soco T10


Soco systems Model: T10 Case taper Serial: 49692 top and bottom case taper, side grip belts, max box 500mm L x 450mm W x 500H, mobile, 3Ph

Metal detector Loma Superscan Micro


Loma Superscan Micro Metal detector Serial: 896593 stainless frame, aperture 140mm x 310mm, belt length 1250mm, pneumatic arm reject into bin

Metal detector Loma IQ3


Loma Model: IQ3 Metal detector Serial: DMC1041922664 stainless frame, aperture 140mm x 310mm, belt length 1250mm, pneumatic arm reject into bin

In-shop baking ovens Frampton pizza oven


Frampton two tier conveyor pizza oven stainless frame with stainless mesh belt, belt dimensions 1800mm x 450mm, variable speed, adjustable temp controls, max loading 20Kw, 28A per phase, 3Ph

Metal detector Loma IQ2


Loma IQ2 Metal detector 2001, stainless mobile frame, aperture 240mm x 90mm, belt length 1750mm, pneumatic arm reject into bin

SANFOR CIBITEX SANFORISER


CIBITEX SANFOR, 2.000 MM WORKING WIDTH. YEAR 1986 - HIGH ENTRANCE WITH STEAMING DRUM - SHRINKING UNIT, RUBBER BELT WIDTH 2.100 MM (CYLINDER WIDTH 2.200 MM) - PALMER FOR FIXATION, DIAMETER 2.000 MM, FELT WIDTH 2.250 (CYLINDER WIDTH 2.400 MM) - EXIT BY A-FRAME BATCHER SPARES INCLUDED WITH THE MACHINE: RUBBER BELT, BLANKET FOR THE PALMER, CONVEYOR BELT FOR RELAXATION RUBBER BELT GRINDING DEVICE

Donut fryer Heudra HBM-25


Product number: 1257 Type: HBM-25 Belt width: 650 mm Frying length: 3500 mm Capacity: 2000/3000 pieces/hr Heating: electric Height dividers: 40 mm Oil volume: 600 liter Power: 3 x 400V, 50Hz, 56kW Dimensions: 4300 x 1100 x 1400 mm Dimensions extractor hood: 1000 x 3600 x 600 mm With tilt mechanism

Belt saws Medoc ST-270


Product number: 1254 Type: ST-270 Pulley: Ø 250 mm Blade length: 1985 mm Power: 3 x 400V, 50Hz, 1,5kW Dimensions: 700 x 580 x 1000 mm Weight: 85 kg

Filling- & Sealing machine Schutten VSM500-1


Product number: 1251 Type: VSM500-1 Serial number: 07019 Year of construction: 2007 Capacity: 10 -35 trays/min. Tray size: 125 x 99 x 33 mm, 250 ml Hopper: 50 liter Outfeedbelt: 2000 mm long, 180 mm wide Power: 3 x 400V, 50Hz, 2kW Air pressure: 6 ...

Oil fryer Coat & Fry fryer


Product number: 1249 Type: Fryer Year of construction: 2014 Belt width: 400 mm Frying length: 1800 mm Heating: thermal fluid Power: 3 x 400V, 50Hz, 5.1kW Dimensions: 2500 x 1500 x 2900 mm Oil filter, circulation pump, electric hoist, touch screen ...

Granulators MECCANOPLASTICA BLC 1000


MECCANOPLASTICA BLC 1000 100 Hp motor loading conveyor belt TR90 loading hopper A540 rotor complete with electric cabinet

Belt microwave Meac Multiheat 32


Product number: 1248 Type: Multiheat 32 Year of construction: 2003 Belt width: 450 mm Infeed height: 250 mm Dimensions: 6200 x 1800 x 2500 mm

Multi purpose base


Multi purpose base unknown Model unknown Year 1990's Working width 74 cm Vacuum belt 200 cm Roller table 160 cm Description this unit can be put behind a folding machine and on the vacuum belt you can put scanners or inkjet/printer heads Available ...

Folding machines Stahl KD78-4KZ


Folding machine 16-pages Stahl Model KD78-4KZ Year 1996 Max. Size 780 x 1200 mm Feeder Round pile feeder Folding configuration 4 buckles + 2 knives Delivery Belt delivery (not shown on photo) Details Digital counter, noisehoods, pump Available di ...

laminating machine Tunkers Vorwards S 1100


Laminator - paper over board Tünkers Model Vorwards S 1100 Year 1990 Min size 200 x 800 mm Max size 1100 x 1400 mm Feeder Tünkers SBE-P 1100 Gluer Tünkers Vorwards S 1100 - with vacuümbelt, glue level detection Laminator Tünkers Kaschierstation P ...

Wide belt grinding machines Sandingmaster CSB/2/900


Sandingmaster 2/900 Sander brand CSB/model, consisting of a roll of medium hardness and buffer, usable for veneer wood panels, pad width 900 mm. engine roll from about 11 Kw motor pad about 7.5 Kw. Inverter to vary the speed of the carpet. Used 190x165xh ...

Spiral freezer Reco 400mm


spiral belt stainless steel with 8 tiers nett belt width ± 400 mm belt Intralox belt length : ± 80 m dimensions (l x w x h) : ± 5.400 x 4.450 x 2.700 mm motor compressor and evaporator included does not include any insulations panels

spiral freezer Reco 200mm


spiral belt stainless steel with 14 tiers nett belt width ± 200 mm belt Intralox motor compressor and evaporator included does not include any insulations panels

Tunnel Pasteurizer 55.000 bph Krones - Zierk K570-131 Double Belt 10-zones


Tunnel Pasteurizer for glass bottles Krones K570 – 130, 55 000 bph The machine was delivered by Krones in year 1998. This machine is for pasteurizing beer in 0.33 – 0.5 liter glass bottles, the capacity is 55 000 bottles per hour. This pasteurizer has ...

Evaporative Condenser BAC VXC 1240 BAC France VXC 1240 - R717 - 4984 kW


Evaporative Condenser BAC VXC 1240 - 4984 kW This evaporative refrigerant (NH3) condenser was delivered by BAC France in 2009 but it was never installed. This unit has four separate forced draught, curved plate and belt driven centrifugal fans which ar ...

Stone catchers Tomra Genius 1600 S Optical sorting machine


Tomra Genius 1600 - S Optical sorting machine The Genius optical belt sorting machine uses a combination of various sorting technologies to meet the high food safety requirements of the food industry and individual food processors.The Genius removes al ...

Belt Conveyor MK GUF-P 2000 AC 2052/200


Max. conveying speed: 80m/min, max. load capacity: 75kg, including two hot air blowers LEISTER for shrinking the product.
Get the latest machine offers by email: order newsletter