beer filling used for sale

Roast knuckle or chicken grill BEEREX Type: HD 5 Power: 9 kW Power supply: 400 V / 50 Hz Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

BERR filler SMB/Leibinger 18/6 with 18 filling valves and 6 head crown corker running direction: right-to-left year of manufacturing: 1989 with long filling valves/tubes with safety housing incl. CIP TULPS

- For empty bottle sorting Dimensions: - Belt height: 950 mm - Length: 1000 mm - Width: 1000 mm - Height: 1500 mm

2 big bag emptying stations available, each unit includes. A - A support frame with safety grid. B - A pneumatic emptying aid + big bag docking device Material: stainless steel 1.4301 C - A hopper Material: stainless steel 1.4301 D - Dosing and transfer screw DS 200 Capacity: 2,000 kg / h Power: 2.2 kW ATEX classification E - Pneumatic closing valve Nominal diameter: 200 Material: aluminium / stainless steel ATEX classification F - Pneumatic transfer supply unit. Diameter: 80 G - Hoist and spreader Equipment: Yale ES1 Capacity: 1000 kg Quantity available: 2

hydraulische lifting table dimensions of the table (single): 1100 x 1450 mm height min/max: 400 mm / 2000 mm maximum charge: 1000 kg

- Machine in good condition

- In good working condition

- Thermo and tin capsules + poly laminate capsules - With needle separator - Machine in good condition

The combi line, mainly operating with OW bottle however is not in use since 2020, ready to operate after Includes: Krones Monobloc VK2V 066-103/KK, Year 1999, Capacity 24,000BPH. SMI Heating Tunnel, Model LSK35t, Year 2014, Capacity 35PPM. Kettner Crate Palletizer, Model Press Uni 1N, Year 1999, Capacity 30,000 bph. Kettner Crate Palletizer, Model EntlPress Super, Year 1999, Capacity 30,000 bph. Robopac Foil Stracher, Model Helix HS30 T/l, Year 2012. ZM Jerzy Robak, Bottle rinse, Model PBSz-01-60, Year 2014. Fischer Pasteurizer, Model 10Pl, , Year 1999. Krones Crate Washer, Model KKW-50, Year 1995. Krones Crate Packer, Model Linapac, Year 1999. Krones Empty Bottle Inpsector, Model Linatronic, Year 2019. Krones Labeller, Model 720-18-86-130, Year 1999 Capacity 28,000 bph. Krones Bottle Washer, Model KES-1-1-190/19-80, Year 1998, Capacity 28,000 bph. Krones Bottle Unpacker, Model LL-DEP-30 ...

Cat.-Nr. 11-2625 new Cat.-Nr. 11-2625 Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Tested up to 3,4 bar – working pressure + 2,0/- ,015 bar Upper Bottom: with strong stackable crown with manhole lid DN 400 with 6 x Screws with 1 x overpressure valve with 1 x CO² venting valve Cylindrical Body: with 4 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with conical bottom with 4 strong feet can be moved from all sides with forklift / truck pallet Measurements and Weight: Total Height: 1520 mm Diameter: 800 mm Weight: 92 kg Surcharges / each: Fermentation Lock DN 50 Sample Valve Blind Cap DN 50 Fermentation Fittings CIP Cleaning System The price is for one tank. The tank is also available in 300 litres. The price is 1535€ for one  ...

Cat. No. 09-1049-1 in very good condition Standard: Material: V2A (AISI 304) 1.4301 with cooling jacket only 300 mm high with input 1" AG with manhole top m.6 screws DN 50 and DN 25 with outlet DN 50 - output 1 1/4 AG with conical underbody Pressure resistant 1.5 bar Diameter: 115 cm Height: 125 cm Weight: 106 kg Supplement (please ask for price): Fermentation spandconnection DN 50 Fermented spundar fitting Trial tap CIP Cleaning Blind cap DN 50 Diving shaft/temperature sleeve The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Kat. No. 09-1049-3 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,950 mms of weight: 126 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature controll unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1049-2 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,050 mms of weight: 106 kg surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1049-4 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 2,100 mms of weight: 136 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Year: 1989 Type: Monoblok VKVCF 72/12 Bottle type: 0,5l glass Efficiency: 28500 b/h Operation mode: pressure Technical data: -72 filling valves -12 crowning heads -double evacuation -vaccum pump

Cat. No. 12-2945 New Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: stable stack crown Manhole lid DN 400 6 x Star Head Eye Screws 1 x Threaded welding nozzle DN 50 with blind cap 1 x Overpressure valve 1 x CO2 ventilation valve Body: 4 x Beading stiffeners Underbody: forward pulled outlet pipe DN 50 Cone floor 4 feet, very stable design with pallet truck underpassable with forklift shoes for fork holder Supplement (on request): Fermentation spandconnection DN Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. Weight 85 kg Height 1410 mm Diameter 700 mm Cylinder height 750 mm Material AISI304 (V2A) 1.4301 Test pressure 3.4 bar Construction form vertical Working pressure range +2/-0.15 b ...

Cat No. 13.0412 in a very good condition operating pressure: max.3 bar year of construction: 1996 connection on top: 2 and ¾ with plastic cap without pressure fitting measurement and weight: HxD: 670x400 mm - weight: 13,5 kg The price is for one unit. All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Beer filters 45 hl / h performance, Kieselgurfrei

Ladies and gentlemen, we are looking for beer The contract period is expected to be negotiated for one year, With a friendly greeting Trade & Translations

Storage Tanks / Pressure Tanks / Beer Tanks in V2A with cooling jacket Test pressure: 2,86 bar, Operating pressure: 2 bar Volume: 1500 Litres -NEW- Measurment and Weight: Total Height: 2609 mm Cyl. Height: 1500 mm Diameter: 1100 mm Weight: 290 kg Material: V2A (AISI 304) 1.4301 Upper bottom: • with manhole Ø 400 mm with 4 x screw • with 2 eyelets • with ventilation system DN 50 • with CIP-cleaning • with downward drawn filling pipe DN 32 with fermentation connector with overpressure valve, with manometer (on extra charge) Tank cylinder: • with ladder hook up • with cooling jacket h=1000 mm • with sample valve DN 15 (on extra charge, with spiral in stainless steel also available) • with immersion socket for temperature indicator and temperature indicator (on extra charge) • on the back of the t ...

Beer tank, single-walled, isolated with fittings Manufacturer: Wilhelm Schmidding Type: transport container Year of construction: 1977 Capacity: 22,500 litres Pressure: 3 bar Material: 1.4541 Temperature: 20 ° C Dimensions: Diameter: 1,750 mm Length: 9,850 mm Container has been cleaned already. In very good condition!

KRONES filler Year of construction: 1986 overhaul: 2012 Capacity: 24,000 fl/St vacum pump doble pre evacuation

Bottle filler with great Division for special filling

Beer filler with KK

Eurolux Beer Tanks / Fermentation Tanks in AISI 304 test pressure: 1,5 bar, operating pressure: 0,99 bar with Cooling Jacket with Isolation - Capacity: 1000 Litres NEW Material: V2A (AISI 304) 1.4301 Upper bottom: with Manhole with 6 Screws incl. thread connection DN 50 according to DIN 11851 with over- and underpressure valve Tank Body: with Cooling Jacket 600 mm wide with inlet 1” external thread with Isolation Lower bottom: With Conical Bottom and rest outlet underneath with a forklift and pallet truck Measurements and weight: WxH: 1150 x 1950 mm Zyl. height: 850 mm weight: 170 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock Butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 Immersion socket for temperature control Temperatur ...

Brewhouse Tank Farm from 15hl / brew Craft Brewery Complete tank farm / cold block from the 15hl/brew craft brewery, made by Estonian Torsteel in years 2014 – 2016. Tanks are made of AISI 304 and they are insulated pressure tanks. All CCTs have two cooling zones on both sides of the tanks and one cooling zone in cone, BBT has two cooling circuits on side and yeast tank cooling zone is on side of the tank. Tanks are equipped with pressure safety valves, CIP bowl, zone specific temperature sensors, manholes, sampling taps, filling and emptying valves. Tank temperatures is automatically controlled from common control panels. The following tanks are available - CCT 14 x 3000 liters net, working pressure 1.5 - 3.0 bar - CCT 2 x 1500 liters net, working pressure 3 bars - BBT 1 x 3000 liters net, working pressure 1.5 bars - Yeast tank 1 x 300 liters,

tested, in V2A Dimension: Total height: 1.300 mm Body height: 820 mm Diameter: 550 mm Weight: 40 kg

Tribloc (rinser-filler-capper), pressure filler, isobaric, with vacuum pump pre-evacuation, manufacturer: Cimec Italy, type DPS 20-24-3, 20 rinsing nozzles, 24 filling valves, 3 head crown corkers, year of manufacture: 2013, with height adjustment. Tribloc (Rinser-Filler-Crowner), counter pressure, isobaric, with vacuum pump, pre-evacuation, Made by: Cimec Italy, Type: DPS 20-24-3, 20 head rinser nozzles , 24 filling valves, 3 head crown corker, Year: 2013, with hight adjustment

Oil hand pump, oil cabinet, oil cabinet, oil conveyor, oil dispenser, oil dispenser, oil station, oil slinger -Handover: in the current condition as seen -Level indicator: missing, see photos for condition -Manufacturer: Tecalemit, mobile oil dispenser with hand pump -Item no.: 1.520201.1 -Tank capacity: approx. 30 liters -Pump: hand operated -Hose: lockable with tap -Dimensions: 500/440/H820 mm -Weight: 17 kg

Oil hand pump, oil cabinet, oil cabinet, oil conveyor, oil dispenser, oil dispenser, oil station -Manufacturer: workshop technology, mobile oil dispenser with hand pump -Tank capacity: approx. l -Pump: hand operated -Hose: lockable with tap -Dimensions: 430/400/H770 mm -Weight: 15 kg

Beer combi filter 25 HL /h More then 300 machines new and second hand on our seema .de

Complete beer production system with 3 hl brewhouse. In detail: 1 3hl cooked room, Simatec brand, year 2015, consisting of mash vat, boiling vat and filter vat, heated by steam with instantaneous exchanger for sparge. Quadro PLC cooking room. 1 Pump trolley composed of a screw pump for transferring must and a centrifugal pump for washing. 1 open-top fermenter 12 hl Simatec 2 Simatec 6 hl open top fermenter 1 10 hl Socis truncated cone fermenter 1 Thermindus steam boiler 75kw/steam, patent-free, 1 Chiller Frost Italy SIAL R 9 COOLING CAPACITY KW 7.3 1 Tank control panel Complete system 1 100 liter cold water storage tank. With secondary pump 1 Labeling machine with batch and expiry hot stamper 1 AUT water softener. CRO. ELE. T581SIMPLEX COMP. 50 LT1 1 Three-phase belt compressor Fiac AB 200/515 T ? 1 reverse osmosis system 1 Engl Derby mill 1.5kw/380v/950u with pedestal a ...

Mixing tank, with approx. 70 hl capacity, in stainless steel, outdoor, with 100 mm insulation, with fully welded stainless steel cladding, standing on 4 feet, with flat conical bottoms, with spray head, manhole, side inlet, outlet, Ø: 2,000 mm, H: 4,500 mm

2 x 300 hl storage tanks, Fabr. Schulz Bamberg, bobbin bottom tanks, 0.9 bar, coolable via 1 cooling zone in the Double jacket, insulated with 130 mm and stainless steel sheet, with manhole in the lower frame, sight glass in the upper frame, with spray head with pulled down cleaning line, outlet pulled forward, ladder bracket, Crane eyelets, height: 4.25m, Ø: 3.95m, built in 2003, expanded

Capacity: 160 hl, Position: standing, Base construction: flat heads

Capacity: 180 hl, Width: 2400 mm, Height: 4500 mm, Position: standing, Base construction: flat heads, Features: circulation pump

Insulated, with cooling connection

Beer grill AG heated showcase, type: WP 1/1, number: 40179 and WP2/1, number: 40163, plate dimensions: 670 mm x 520 mm, tray dimensions: 520 mm x 340 mm x 100 mm, total dimensions: 1080 mm x 840 mm x 700 mm.

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 5 KW Machine dimensions in cm: Width: 80 Length: 100 Height: 190 Delivery time: 20 working days after advanced payment

Continuous vacuum filler for straight filling, portioning, and twisting All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 90 Length: 70 Height: 160 Delivery time: 20 working days after advanced payment

Type: S200 Vacuum Filling Machine Continuous vacuum filler for straight filling and portioning All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Length: 130 Height: 210 Delivery time: 20 working days after advanced payment

Handtmann VF 50 vacuum filling machine for filling, portioning, linking, MC-control, filling capacity up to 2,600 kg/h, pressure up to 55 bar, 420 port./min, portioning from 5-100.000 g., with linking device. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Vacuum filler Robby, filling, portioning, linking, pc control. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Vacuum filling machine Frey Konti A 50, filling, portioning, linking, max. 2300 kg/h, filling pressure max. 30 bar, portioning speed max. 300 port./min, all stainless steel, CAN control, impulse control for clipping machine, filling pipes with different caliber. The machine is currently in the refurbishing and can be tested in our facility in Koblenz, Germany.

Handtmann VF 616, year of manufacture 2006, vacuum filling machine for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar. The machine is immediately available and can be seen in Koblenz, Germany.

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.

Producer: Alpina Description: -Hopper capacity: 60l -Paddle rotor (teflon paddles) -Twister -Efficiency approx 300kg/h

Frey Heinrich 20 piston filler, 20 liters piston filling machine, including filling pipes. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Handtmann VF 616 + PLH 216 sausage unit / hanging unit, consists of vacuum filling machine Handtmann VF 616 for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar, with Handtmann PLH 216 hanging machine. The sausage unit is currently in the refurbishment and can be tested in Koblenz, Germany.