bed used for sale

Bed feeding machine - Universal AUERBACH FBE 2000 Bearing No. 1105-01972 Category Bed frit machine - Universal Make Auerbach Type 2000 FBE Built in 1996 Condition Used machine Control CNC Heidenhain TNC 415 Storage location FRANCE Country of origin Germany Delivery time by appointment Freight base from stock Technical details x-way 2000 mm y-way 900 mm z-way 900 mm Table size 2100 x 800 mm Tool holder SK 50 Spindle speed: 30 - 3500 rpm Control Heidenhain TNC 415 Spindle drive 29/22 kW Feed speed 1 - 6000 mm/min Rapid speed 15 m/min Total power requirement 42 kVA Machine weight approx. 12.5 t Room requirement approx. 7.7 x 5.5 x 3.0 m Description 3-axis bed-feeding machine With MANUELER two-axle universal head , - vertical level 360 x 1 degree - 45" level 360 x 1 degree

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

Manufacturer: ERFURT - Niemcy 2 PIECES AVAILABLE Model: PKZV I 1250 Condition: Very good, complete, under power Technical details Table: 4000 x 1800mm Press weight: 230T Force: 1250T Slide stroke: 630mm Centres of pressure: 2 Adjustability of slide: 630mm Max delight between bolster and slide: 1165mm Width beteen columns: 4000mm Slide area: 3950 x 1800mm Bed area: 4000 x 1800mm Opening in bed: 3750 x 1300mm Main motor power: 132kW Idle stroke rate: 11 per minute Counter pressure of cushion in bed: 250T Stroke of cushion plate: 250mm

Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Working condition Complete electrics Yom: 1990 Technical details: Swing over bed: 2500 mm Turning length: 12 500 mm (The whole length of bed 15 700 mm) we can also make the extension of the needed workpiece weight: 120 tons bed width: 2 900 mm machine weight: 120 tons

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

turning diameter over bed: 5000 mm turning diameter over slide rest: 4000 mm turning length: 22000 mm total power requirement: 36 kW weight of the machine ca.: 53,5 t dimensions of the machine ca.: m Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After the overhaul, the lathe was no longer operational. Machine is dismantled and stored near Hamburg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 900 mm turning diameter over slide: 460 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3.300 kg. dimensions: 4.630 x 1.200 x 1.529 mm characteristics - Versatile application possibilities in general mechanical engineering, Production, one-off production, ... - Central, handy switching for feeds and threads with lead screw and pull spindle - Prism bed made of gray cast iron, inductively hardened and precision ground - Modern main spindle bearings with tapered roller bearings in precision design - Hardened and ground gears and shafts, also in the feed gear - Standard with rapid traverse lengthways and flat to reduce non-productivetimes - Large spindle bore (105 mm) for workpieces with a large di ...

turning diameter over bed: 250 mm turning diameter over slide rest: 110 mm turning length: 350 mm center height over bed: 125 mm centre distance: 350 mm bed width: 170 mm spindle bore: 24 mm turning speed range: 440 - 3600 U/min voltage: 380 V weight of the machine ca.: 350 kg dimensions of the machine ca.: 1,25 x 0,55 x 1,25 m - revolver 5-fold - Collet equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 1600 mm Center distance: 10000 mm Spindle bore: 0 mm Numbers of bed guide ways: 0 Weight between centres maximum: 40000 kg MACH-id     3990 MAKE         Poreba Poland TYPE           TCG 160 YEAR         1995 SPECIFICATIONS Swing over bed Ø      1600 mm Swing over cross slide       1300 mm Distance between centres    10.000 mm Work piece weight       40.000 kg Spindle speeds / ranges        200 Rpm Bed width      1300 mm Power        75 Kw DIMENSIONS Length         15900 mm Width           2800 mm Height         2800 mm Poreba TCG 160 lathe, we ha ...

Turning diameter: 1000 mm Center distance: 5000 mm Spindle bore: 0 mm Numbers of bed guide ways: 0 Weight between centres maximum: 14000 kg Make Skoda SRM 1 Type SRM 100 x 5000 Year 1976 Heavy Duty Lathe Centre height (mm) Swing bed = 1.000 Center distance (mm) DBC = 5.000 Spindle bore Work load = 14 T incl. 4 chuck 1000 mm incl. steady rest 500 mm Power 40 kW / bed width 950  

Facing lathe make HEYLIGENSTAEDT type 405 EVMachine -No: 581242229/189623 Year of construction 1965 with sliding upper bedTop width: 1750 mmTop height from the underbed: 405 mmTurning diameter over bed: 810 mmTurning diameter over bed slide: 620 mmTurning diameter in the crank: 1500 mmLength of the offset in front of the faceplate: 750 mmCamber width: 0 - 400 mm18 spindle speeds: 9 - 450/14 - 710 rpm.42 feeds: 0.09 - 5.6 mm / rev42 flat feeds: 0.045 - 2.8 mm / revFaceplate diameter: 800 mmSpindle bore: 86 mmBed width: 540 mmDrive power: 14 kWDimensions approx: 4000 x 1500 x 2200 mmWeight approx: 6,0 tWith- new main spindle- sliding upper bed- Faceplate Drm. 1200 mm- Faceplate Drm. 800 mm- Multifix steel holder with 3 cassettesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not bind ...

CNC Plasma Auto Bevel machine KOIKE VERSAGRPH-6000 3DP (2014) Width 4500 mm x 43 M, thickness 6-40 mm; "Plasma""I""cutting: 6 to 40mm; ""V""cutting: 9to 30mm; Power supply 3-phase 440V; Fluid oxygen 7~9.9 kg/cm; Fuel gas 1~1.5kg/cm (LPG); Air 7~9.9 kg/cm"; Cutting speed: 0~6,000mm/min; Marking Soeed max. 18,000 mm/min; Rapid speed:24,000mm/min (2014) Cutting bed dim: 30M x 4.6M Rail Length: 30M; Span: 6M With Chiller, Power Supply, Panel box, Cable rail, compressed air dryer, dust collector and Transformer Rails and cutting bed Attached to rails and cutting bed of Lot 313 Make KOIKE Serial VG-A-0218 Model VG-6000DXI Year 2014

L + Z lathe WEWAG model 250 / 1500 Factory no. 20953 Year of construction approx. 1975 Distance between centers 1500 mm Nominal turning diameter over bed 500 mm Turning diameter over bed max. 510 mm center height above bed 255 mm turning diameter over support 300 mm center height above support 150 mm spindle bore 56 mm spindle speed 18 - 1800 rpm. 24 steps lathe chuck holder short cone DIN 55022 Tailstock inner cone MK 5 Drive power 4 kW and 6.7 kW pole switchable - 3-jaw chuck BISON, 250 mm with one set Hard step jaws steel holder 4-fold for turning - fixed Lynette - Control cabinet fixed to the back of the machine weight 2500 kg; used

Engine lathe NILES DP1/S3 Year of manufacture: 1988 Manufacturer: NILES Made in Germany Machine is almost not used, complete Technical Data: Height of center over bed: 800mm Max. processing diameter over bed: 1.600mm Max. processing diameter over support:1.250mm Min. work-piece diameter: 250mm Max. work-piece weight: 40.000kg Max. work-piece diameter: 1.250mm Internal spindle cone (1:10): 120mm Range of longitudinal support feeds: -1st row (stepless adjustment): 1-200mm/min -2st row (stepless adjustment): 36-3600mm/min Range od feeds of transversal slides: -1st row (stepless adjustment): 0,4-80mm/min -2st row (stepless adjustment): 14,4-1440mm/min Range of feeds of cross slides: -1st row (stepless adjustment): 0,12-25mm/min -2st row (stepless adjustment): 4,5-450mm/min Length of travel: -Of transversal slides: 760mm -Of cross slides: 500mm -Of incisive ca ...

FEATURES: GIDDINGS & LEWIS 8000 CNC CONTROL, RETROFITTED 2000 55.12" DIAMETER FACE PLATE CHUCK WITH JAWS 16.92" DIAMETER BORING BAR BORING HEADS (2) W-AXIS POSITIONING X-AXIS TAPER FEED PRESSURE MEASURING DEVISE HARDENED & GROUND WAYS COOLANT SYSTEM WITH POLO PAPER FILTRATION PRAB CHIP CONVEYOR SYSTEM CAPACITY: MAXIMUM SWING OVER BEDWAYS 62.99" BORING DIAMETER SOLID BORING 12.4" TREPANNING 2" TO 25" COUNTER BORING WITH PILOT PRE-BORE + 25" MAXIMUM BORING DEPTH, Z-AXIS 396" LENGTH OF BED 1,176" WIDTH OF BED 39.37" MACHINE WEIGHT 180,000 LBS WORK HEADSTOCK: SPEEDS, INFINITELY VARIABLE 1.8-355 RPM SPEED RANGES 4 MAIN SPINDLE DIAMETER FRONT BEARING 11.81" MAIN SPINDLE BORE 6.4" MAXIMUM TORQUE, 31 RPM AT 180 HP 39,900 FT/LBS MAXIMUM WORKPIECE WEIGHT (1) REST 88,000 LBS MAXIMUM WORKPIECE WEIGHT (2) RESTS 110,000 LBS MAXIMUM WORKPIECE WEIGHT (3) RESTS  ...

34"/44" x 60" Mazak gap bed lathe Model: Rex, Specifications: Swing over bed ways . 34" Swing in removable gap .. 44" Swing over cross slide .. 24-1/2" Distance between centers 60" Hole thru spindle ... 4-1/16" Spindle nose D1-11" camlock Width of bed 22" Spindle speed range (16) 12 - 1200 rpm Longitudinal feed range . .00217" - .0331" ipr Cross feed range half of longitudinal setting Inch threading range (40) ... 4 - 56 tpi Metric threading range (23) . .5 - 7 mm Tailstock spindle travel 8" Tailstock spindle taper . #6mt Approximate floor space . 144"L x 60"W x 60"H Approximate weight .. 12,500 lbs

greates pass round over bed: 560 mm turning length: 1500 mm control: Siemens Sinumerik 828 D swing diameter over slide rest: 390 mm spindle speed:: 2400 Upm bed width: 345 mm spindle bore: 80 mm diameter of quill: 75 mm quill stroke: 200 mm tailstock quill taper MT: 5 3-jaw chuck: Schunk Rota S 315 3-jaw-chuck diameter: 315 mm main drive: 14 kW weight of the machine ca.: 2900 kg dimensions of the machine ca.: m removeable bed bridge user interface control: Shopturn hydraulical tailstock quill adjustment key bar chuck Schunk Rota S+ 2.0 315-92 quick change tool holder Choromant Capto The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Small SHIMA SEIKI knitting unit composed of: 1 SHIMA SEIKI flat bed knitting machine, type SES122FF, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122RT, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122S, GG 7 1 SHIMA SEIKI design programming computer type DS ONE (E) Model VX2000, 1 SIMET electronic Winder with deknitting device model SED/6,6 winding heads, 6” traverse, works as a normal cone to cone winder and permits to recover the yarn from defective knitting clothes

Key data: 600 mm, 1000 mm, 3000 1/min

Machine Details Stock-No. 1105-03926 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER Type CTX 600 Year of manufacture 1995/96 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time CALL ME Freight basis EX WORK Price Technical details turning length 1000 mm control GRÜNDING EPL 2 swing diameter max. over bed cover 650 mm total power requirement 27 kW Weight of the machine approx. 7 t Additional information 1 METER MACHINE 2 AXIS 3-jaw chuck DIA 400 MM 12-fold revolver with Some tool holders 10 PARTS VDI 50 Programmable tail stock Chip Conveyor coolant device with 4bar-25l/min, Technische Daten / technical details: Center to center 1000 mm Umlaufdiameter über Bett / turning diameter over bed 650 mm Umlaufdiameter über Schlitten / turning diameter over sledge 480 mm Planweg / cross travel 320  ...

turning length: 750 mm turning diameter: 400 mm centre height: 165 mm turning diameter over slide rest: 190 mm spindle bore: 32,0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 770 kg range L-W-H: 1985 x 890 x 1195 mm New price ~ 23.000 euros from a training workshop () Furnishing: - Spindle speed continuously adjustable in 2x switching stages - TOS 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - NEWALL digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake all technical data: - Turning diameter over bed 400 mm - Distance between centers 750 mm - Center height 165 mm - Spindle bore 32 mm - Turning diameter over cross slide 190 mm - bed width 200  ...

Description Very well-preserved high-performance roller lathe WALDRICH SIEGEN. Refurbished in 2012 for € 595,000.00, with R&D control and functional guarantee. Details Type WKDF 900/15 Kop. Machine number 14183 Built in 1971 Bed width 1,610 mm Bed height 670 mm Bed length 7,670 mm Headstock center height 600 mm Face plate Ø 920 mm Clamping range 200 - 630 mm Support max. copying depth with largest turning diameter 250 mm Tailstock quill adjustment 100 mm Quilles Ø 300 mm max. workpiece length 4,000 mm max. workpiece weight 15 tons Additional Accessories Copying Device incl. documentation

37 Tsudakoma Zax looms for sale in running condition 12 Tsudakoma Zax Looms 280cm - 110" Year 2002 Staubli 1761 - A 6 Harness Frames 2 IRO weft feeders 1.5 Beam 1.5 Cloth roll 6 Cams 5000 Heald wires 5000 Drop wires Tucking L + R Looms are in running condition, producing cotton bed sheets Testing running at the time of delivery 13 Tsudakoma Zax Looms 330cm - 130" Year 1998 Staubli 1761 - A 6 Harness Frames 2 IRO weft feeders 1.5 Beam 1.5 Cloth roll 6 Cams 5000 Heald wires 5000 Drop wires Tucking L + R Looms are in running condition, producing cotton bed sheets Testing running at the time of delivery 12 Tsudakoma Zax Looms 340cm - 1430 Year 2001 Staubli 1761 - A 6 Harness Frames 2 IRO weft feeders 1.5 Beam 1.5 Cloth roll 6 Cams 5000 Heald wires 5000 Drop  ...

Center height: 800 mm Center distance: 3000 mm Spindle bore: 92 mm Centre latheTOS TRENS - SUI 80  Swing over bed Ø:        800mm Swing over cross slide Ø:520mm Swing in the gap Ø:      870mm DBC Turning Length:      3000mm Gap length:              320mm Spindle bore:            92mm Spindle power:           15kW Bed width:               550mm Tailstock spindle Ø:     110Ø Stroke pinole:           210mm Spindle taper:           6Mk Speeds / ranges:         3200Rpm Feed rate X-Axis:        2400mm/min. Feed rate Z-Axis:        4800mm/min. Leng ...

Key data: 820 mm, 2000 mm, 515 mm

We offer an exceptionally good precision lathe here. The machine is probably the best German lathe that has been built in this class. BOEHRINGER Precision Lathe Model DUE 800 Year of construction: 1984 Ma.-No.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter via face slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar clearance: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. torque: 6300 Nm 24 speeds: 7.1 – 1400 rpm. 60 face feeds: 0.05 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Trustock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital display HEIDENHAIN coolant device; Chip protection rear wall, power chuck Autoblock 500 mm with clamping jaws ...

Lathe Böhringer VDF with programmable cycles Type DUS 560 Machine No. 1022.3073-03 Built in 1993 Center width 2000 mm Connected load 19 kW Working Range/Dimensions Circulation diameter over bed 570 mm Circulation diameter via face slide 365 mm Sliding distance of the face slide 345 mm Displacement of the upper support 125 mm Center height over flat track 280 mm Bed width 360 mm Bed carriage guide length 520 mm Slide width 225 mm Slide length 680 mm Upper support width 140 mm Turning bit cross-section according to DIN 770 hxw 32x25 mm Main spindle Spindle head according to DIN 55 027 size 8 Spindle diameter in front bearing diameter 100 mm Spindle bore diameter 62 mm Inner cone of the main spindle 70 metr. Main drive Infinitely variable three-phase motor (AC motor) Drive power 60 % / 100 % ED 19/15 kW Torque 60 % / 100 % ED 1800/1400 Nm Total speed range  ...

Turning diameter: 1600 mm Center distance: 12000 mm Spindle bore: 120 mm Numbers of bed guide ways: 2 Weight between centres maximum: 20000 kg CNC Brand: Siemens CNC Model: SIEMENS 840D in 2009 retrofitted: New Rittal E-Cabinet New wire & measuring scales New Servo engine New 840D controller New Hydraulics Swing over bed Ø:        1600mm Swing over cross slide Ø:1250mm DBC Turning Length:      12000mm Spindle bore:            120mm Spindle power:           75kW Bed width:               2400mm Speeds / ranges:         224Rpm Feed rate X-Axis:        2500mm/min. Feed rate Z-Axis:        2500mm/min. Length:                & ...

Key data: 570 mm, 1000 mm

Weiler E50/1 - CNC lathe - 4-jaw face plate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 5 sets of soft top jaws - fixed bezel - Moving center punch tip MK5 - Mulifix B quick-change holder incl. 10 attachments - Switch-on time 32582 h - Built in 1997 - incl. operating instructions and technical documentation Specification Workspace: - Center width: 1000 mm - Center height: 280 mm - Circulation diameter over bed: 570 mm - Circulation diameter via face slide: 340 mm - Circulation diameter in the recess: 600 mm - Bed width: 350 mm - Sliding distance of the face slider: 340 mm - Displacement of the upper support: 140 mm - Slide length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning chisel cross-section (height/width): 32 x 25 mm Fulcrum shaft: - Spindle head according to DIN 55027: Gr 8  ...

Machine Product: Universal length measuring instruments with a direct measuring range over the entire length of the device. Comparator with horizontal base bed (hard rock with high homogeneity and rigidity) X-axis measuring system: Incremental, high-precision Heidenhain length measuring system, 100 mm long in the measuring element incremental Heidenhain incident light measurement systems over the entire length of the base bed to the left and right of the stage in the base bed Z-axis measuring system: INCREMENTAL, high-accuracy RENISHAW length measuring system, 80 mm long Product: • Standard software 828 WIN ULM "Free Measuring" • PC evaluation unit (without monitor) • Pair of measuring brackets, immersion depth 14mm (0.55 inch) • 2 parallel clamping claws 60/20 • 2 quick-release claws • 2 measuring attachments with spherical zone • Setting gauge 2 • W ...

Turning diameter: 1400 mm Center distance: 12000 mm Spindle bore: 105 mm Numbers of bed guide ways: 1 Weight between centres maximum: 10000 kg Centre latheGurutzpe - Super BT  Motorized tailstock Work load 10 Ton 3 x closed steady rest Feeds all directions Chip conveyor DBC Turning Length:      12000mm Swing over bed Ø:        1400mm Swing over cross slide Ø:1060mm Spindle bore:            105mm Spindle power:           50kW Bed width:               600mm Tailstock spindle Ø:     130Ø Stroke pinole:           300mm Spindle taper:           6Mk Speeds / ranges:         400Rpm Length:            &nbs ...

turning diameter over bed: 3150 mm turning diameter over slide rest: 2650 mm turning length: 15000 mm Control: Siemens 840 D total power requirement: kW weight of the machine ca.: 86 t dimensions of the machine ca.: 16 x 6 x 9,3 m The machine is in dismantled condition, provisionally assembled, but not under power. Machine loaction in East Germany. Price plus costs for dismantling and loading. CNC control Siemens 840D Turning diameter over bed guide ways: 3150 mm Turning diameter over the bed slide: 2650 mm Spindle speed: 4 ranges - from 0.25 to 100 rpm. Maximum turning length: 15000 mm Max. workpiece weight 160 tons Machine accessories: 8 steady rest 2 roles supported Machine weight: approx. 86 ton Space requirement (L x W x H): approx. 16 x 6 x 9.3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mm turning length: mm control: 840 weight of the machine ca.:14 t swing over bed:480 mm turning diameter over bed:330 mm turning diameter over bed slide:250 max. swing dia.:695 mm

Turning diameter: 1600 mm Center distance: 10000 mm Spindle bore: 110 mm Numbers of bed guide ways: 2 Weight between centres maximum: 30000 kg CNC Brand: Siemens CNC latheGurutzpe - GLX 16.15.7  4 bed way construction Bed width 1350 mm Chip conveyor 4 chuck 1250 mm Filtration / Coolant system 2 x C-Type steady rest Motorized tailstock Max. turning Ø:1600mm Spindle bore:  110mm Speedrange:    800Rpm Spindle power: 71kW ATC / revolver:4 Chip conveyor: Yes Pinole taper:  6Mk Quill Ø:       220mm Length:        12000mm Width:         4000mm Height:        3200mm Weight:        35000kg

turning length: 750 mm turning diameter: 310 mm turning diameter over slide rest: 175 mm spindle bore: 32,0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm spindle taper: DIN 55027 GR 5 total power requirement: 2,2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college () Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - NEWALL digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindl ...

turning length: 750 mm turning diameter: 310 mm centre height: 175 mm spindle bore: 32,0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm spindle taper: DIN 55027 GR 5 total power requirement: 2,2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college () Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - NEWALL digital display, front left - MULTIFIX steel holder with 3x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 r ...

turning length: 1000 mm turning diameter over bed: 356 mm turning diameter over slide rest: 220 mm turning dia. in gap: 506 mm length: 0 mm number of spindle speeds: 30 - 3000 U/min. spindle bore: 38,0 mm tailstock quill taper MT: MK 3 quill stroke: 115 mm bed width: 206 mm adjustment: Plan 180 mm spindle taper: DIN 55029, D1-4 total power requirement: 4,0 kW weight of the machine ca.: 1500 kg range L-W-H: 1850 x 1000 x 1300 mm New price ~ 13,500 euros Special price on request Lathe with precision ground and induction hardened bed. Very suitable for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - NEWALL B60 digital display, front left - 3-jaw chuck Ø 160 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder with 3x inserts - folding steel holder protection - Infinitely variable speed adjustm ...

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Ref. -No.: 10367 Manufacturer: WEILER Year of construction: 1996 Type of control: CNC Control: Siemens Storage location: Halberstadt Country of origin: Germany Turning Speeds: 500 RPM Machine length: 7000 mm Machine width: 2300 mm Machine Height: 2600 mm Weight Of The Machine Ca.: 9,25 t Spindle Taper: 6 Mk Travel quill: 300 mm Bed width: 800 mm Turning Length: 3000 mm Turning Diameter Over Bed: 900 mm Swing Diameter Over Bed Slide: 530 mm Spindle Bore: 254 mm Spindle power: 45 kW Tailstock - Insertione Into The Sleeve: 140 Ø Max. Workpiece Weight: 5000 kg Further information: Machine can be inspected under power.

Ref. -No.: 10319 Manufacturer: TAKANG Type of control: Digitalanzeige ACU-Rite Control: Konventionell Storage location: Halberstadt Country of origin: Taiwan Weight Of The Machine Ca.: 1,3 t Swing diameter over bed: 430 mm Bed width: 300 mm Tip length: 1500 Centre Height: 215 mm Bed length: 1600 mm

Ref. -No.: 10320 Manufacturer: TOS Type of control: Digitalanzeige - Mitutoyo Control: Konventionell Storage location: Halberstadt Country of origin: Tschechien Tip length: 1500 Centre Height: 280 mm Centre Distance: 750,1000,15000,2000 mm Spindle Bore: 56 mm Swing diameter over bed: 500 mm Number of speed levels: 18 Circumferential diameter over the support: 320 mm Circumferential diameter over the bed recess: 560 mm Bed length relieved from headstock: 300 mm Universal chuck diameter: 250 mm Diameter of the clamping disc: 500 mm Further information: Universal center lathe

turning length: 1000 mm turning diameter over bed: 640 mm turning diameter over slide rest: 390 mm spindle turning speed range: 4.5 - 1800 U/min spindle bore: 68,0 mm morse taper: 5 MK quill stroke: 220 mm bed width: 405 mm spindle taper: DIN 55022 Gr. 6 total power requirement: 11 - 18 kW weight of the machine ca.: 2500 kg. dimensions of the machine ca.: 2950 x 1200 x 1500 mm from a maintenance workshop - good condition () Machine was checked annually Furnishing: - heavy - robust lead/pull spindle machine - WERNER GARANT face plate Ø 500 mm - HEIDENHAIN digital display - type ND 730 - MULTIFIX steel holder, with 3x inserts - FINN SAFETY lining protection - type SPS 600 - movable tailstock - Machine light - 1x food key - Chip back wall - movable bed stop - 2x EMERGENCY STOP switches - Coolant system, with collecting tray Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenbl ...

turning diameter over bed: 800 mm turning diameter over slide rest: 580 mm turning length: 3.000 mm center height over bed: 400 mm centre distance: 3.000 mm digital readout: 3-Achsen HEIDENHAIN bed width: 400 mm spindle bore: 110 mm turning speed range: 25 - 1.610 U/min power requirement: 9,2 kW 3-jaw-chuck diameter: 315 mm quick change toolholder: MULTIFIX Typ C taper in tailstock-quill: MK 5 dia. of quill: 100 mm quill stroke: 340 mm coolant: voltage: 380 V weight of the machine ca.: 3,6 t dimensions of the machine ca.: 4,90 x 1,60 x 2,00 m - Serial No.: 7634 - Rapid feed for Z- and X-Axis - 3-Axis DRO System HEIDENHAIN - 3-Jaw Chuck FORKARDT F+315, dia.31 5mm - Quich Change Tool Holders MULTIFIX - fixed steady rest - rotating center - Face chuck, dia. 800 mm - various tool holders - Coolant equipment Machine is in excellent condition! The data for this ad was created with ModulMWS  ...

Machine dimensions 15000x4000 mm Bed width 4300 mm Bed height 800 mm Machine weight 300000 Kg Max. load of a machining part fixed between centers without steady rests 150000 Kg Max. load of a machining part fixed between face plate and steady rests 300000 Kg Max. machining diameter 3700 mm Min. machining diameter 300 mm Face plate diameter 2700 mm Max. machining part length 15000 mm Distance between quill and bed guideways 1900 mm Face plate speed range (on 4 steps) 0.315-100 rpm Max. rotation face plate torque 30000 daNm Max. torque to stress between jaws for max. load of 150000 Kg 70000 daNm Turning support (4 tool holders) : Max. turning force 30000 daN Cross travel (ball screw) 1400 mm Cutting blade max. length 1020 mm Working feed range (longit. and tr ...

I will sell a universal lathe made by Korea, type Huichon-500 x 1500, year of manufacture, 1989, after renovation turning length in centers 1500 mm, turning diameter over bed 580 mm, turning diameter over slide 280 mm, accelerated slide feeds, spindle passage 76 mm, machine weight about 3200 kg, cooling system, lighting (24V lamp), Very stiff and accurate. The machine is after renovation, i.e. the bed, transverse slide, tool slide, clamp have been reground, turning parameters have been set (the accuracy of turning corresponds to a new machine), it has new bearings and replaced or regenerated worn elements. The lathe is fully operational. It is equipped with: hardened bed, new position readings, new chuck fi 250 / left and right jaws, independent chuck fi 400.

Machine dimensions 15000x4000 mm Bed width 4300 mm Bed height 800 mm Machine weight 300000 Kg Max. load of a machining part fixed between centers without steady rests 150000 Kg Max. load of a machining part fixed between face plate and steady rests 300000 Kg Max. machining diameter 3700 mm Min. machining diameter 300 mm Face plate diameter 2700 mm Max. machining part length 15000 mm Distance between quill and bed guideways 1900 mm Face plate speed range (on 4 steps) 0.315-100 rpm Max. rotation face plate torque 30000 daNm Max. torque to stress between jaws for max. load of 150000 Kg 70000 daNm Turning support (4 tool holders) : Max. turning force 30000 daN Cross travel (ball screw) 1400 mm Cutting blade max. length 1020 mm Working feed range (longit. and transv.) 0.1-4000 mm/min Rapid feed range (longit. and transv.) 5000 mm/min Tool holder dimensions 120x60x35 mm Ta ...

The laser cutting machine KMT-2002 is manufactured on the basis of many years of successful experience in the production and operation of thermal cutting machines using the most effective technical solutions from European manufacturers.A distinctive feature of the machine is a rigid massive welded bed made of sheet, which is annealed to relieve stresses, which ensures long-term accuracy. The mechanical processing of the bed is carried out from one installation on a high-precision machining center. The design and construction of the bed ensures the absence of vibrations at maximum processing conditions (a common phenomenon on the machines of most manufacturers of the economy segment).

SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024 Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): 905.00mm Stroke of Upper Knockout: 50.00mm Stroke of Lower Knockout: 70.00mm Ram/Slide Width: 1320.00 mm Ram/Slide Height: 1100.00 mm Bed Width: 1340.00 mm Bed Depth: 1400.00 mm Power: 130kW Machine Length: 4055.00 mm Machine Width: 4000.00 mm Machine Height: 6710.00 mm Weight: 140000 kg Condition: like new refurbishing report: 1. Mechanical part • Complete disassembly of the press. • Measurement and troubleshooting of all parts. • The main parts of the press are tested (without destruction) in order to identify any defects. Frame: The frame was inspected and non-destructive testing of the most loaded areas was carried out. Damage to the table pl ...

Lead and Pull Screw Lathe VOEST DA300 Year of construction ca 1980 Turning diameter over bed 600mm Effective turning length: 1850 mm Spindle Passage: 85mm Speeds: 14 - 1000 rpm Tailstock: MK5 Reversal backlash face spindle: 0.5 mm Reversal clearance upper slide: 0.25 mm Rapid traverse bed sledge: in both directions EQUIPMENT - Multifix C - 5 steel brackets - Rotating center tip MK4 - 4 jaw chucks Ø 400mm, plus 3 sets of jaws - 3 jaw chucks Ø 400mm - 3 sets of jaws - Both linings Röhm - Fixed bezel The machine is in good condition. The machine bed is in very good condition.