We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,049 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
We offer Lathe VDF with three-jaw chuck bed >100cm W:approx. 350cm 3000kg see photos The machine is used, fully functional. It is sold in the same condition as it is shown in the photos. specifications - Manufacturer: VDF Werkzeugmaschinen Hamburg - Bed > 100cm - Weight: approx. 3000 kg (customer info.) - Connection: 230V 50 Hz / 24V - Dimensions: estimated 3500 x 150 x 100 cm No further data is available. The machine is still in our customer's factory near Staßfurt. It is sold ex works EXW (forklift loading option available). Please only bid if you accept the terms and conditions of sale We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex works. The offers are subject to change, errors excepted and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also ...
used
Bedeckler, Fabr. Kaak,
used
Bedeckler, Fabr. Benier
used
control panel: Boschert Stanze Year: 1990 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Control panel, injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press -Hydraulic control block comes from: an injection molding machine -Manufacturer: Battenfeld -Dimensions: 380/180/H300 mm -Weight: 17 kg
new
:LL 550 | LL 750 | LL950 turning diameter:550 | 750 | 950 mm turning length:3000/4000/5000/6000/7000/8000/9000/12000/14000 mm control:Siemens/Fanuc/Fagor center height over bed:475|575|675 mm bed width:990 mm spindle bore:153/230/305/405 mm spindle nose:A2-11/A2-15/A2-20/A2-28 spindle speed:9-600/9-500/7-400/5-250 U/min spindle taper:6 MK spindle drive:22/26 (30/37 opt.) kW tool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:32 (40 opt.) mm tailstock quill diameter:165|200 mm tailstock quill adjustment:250 mm taper in tailstock:6 MK tailstock movement:über Motor travel -x axis:370 | 480 mm travel - z:= Spitzenweite mm servo motor X-axis:3 | 4 kw servo motor Z-axis:4 | 7 kw rapid power traverse in X-and Z direction:5/4 m/min hydraulic motor:2,2 (2,9 opt.) kW coolant pump drive:3 (15 opt.) | 15 bar weight of the machine ca.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/2 ...
new
:LL-1250 | LL-1450 | LL-1650 turning diameter:1250 | 1450 | 1650 mm turning length:5000/6000/7000/8000/9000/12000/14000/16000 mm control:Siemens/Fanuc/Fagor center height over bed:705|805|905 mm width of cross cariage:600 mm bed width:1370 mm spindle bore:200 mm spindle nose:A2-15/A2-15/A2-20/A2-28 spindle speed:4-400 U/min spindle taper:6 MK spindle drive:22/26 (30/37 opt.) kW tool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:40 mm tailstock quill diameter:300 mm tailstock quill adjustment:250 mm taper in tailstock:7 MK tailstock movement:über Motor (Zahnstangenantrieb) travel -x axis:755 mm travel - z:= Spitzenweite mm servo motor X-axis:4 kw servo motor Z-axis:7 kw rapid power traverse in X-and Z direction:5 m/min hydraulic motor:1,4 (ab 9m: 3,6) kW coolant pump drive:15 bar weight of the machine ca.:auf Anfrage machine length:15150/16150/17150/18150/19150/20 ...
used
Key data: 1400 mm, 1300 mm, 900 1/min
New price was 110,000 € (200,000 DM) Heavy Duty Lathe Lathe Est Ticino ET-CC 650 Manufacturer: Est Ticino Type: ET-CC 650 Year of construction: 1995 Main motor Siemens: 37kW Control: Siemens (drives), Fagor (display), Omron (PLC) Weight: 9.4t Specifications: Center height 655 mm Center width 1500 mm Maximum turning length 1300 mm Turning diameter over bed 1400 mm Turning diameter via face slide 1050 mm Turning diameter bridge 1400 mm Width of bridge 500 mm Spindle bore 160 mm Spindle speed 3 steps Spindle speed 3 – 900 rpm. Maximum torque 1100 KGM Bed width with double prism 600 mm Bed width with 3rd additional guide 820 mm Length of bed carriage guides 930 mm Width of face slide 420mm Path slide 800 mm Width of the rotatable upper slide 270 mm Travel of the rotating upper slide 400 mm Rapid traverses longitudinal 6 mt./min. Rapid traverses plan 6 mt. ...
new
turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped leading and tension spindle lathes. TH 4215 with digital position indicator DPA 21 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Upper slide adjustment rang ...
used
Facing lathe make HEYLIGENSTAEDT type 405 EV 2500Masch. -No: 190472 built in 1967 with sliding upper bedTop height from the underbed: 740 mmTurning diameter in the lower bed: 1480 mmTop height in the upper bed: 420 mmTurning diameter in the upper bed: 840 mmBed length: 2500 mmTurning length in the upper bed: 2000 mmTurning length in pushed-back lower bed: 1500 mm18 spindle speeds: 9 - 450 rpm.Longitudinal feeds: 0.09 - 2.8 mm / revCross feeds: 0.045 - 1.4 mm / revSpindle bore: 86 mmDrive power: 14 kWDimensions approx: 4000 x 1500 x 2200 mmWeight approx: 6,0 tWith- sliding upper bed- faceplateused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Mach ...
used
Special lathe for turning turbine shafts / large pulleys / large rotors / large pistons Type: DS 2000-13/IV Lathe is equipped with 2 cross-slides: - one is mounted on a chassis bed installed next to the main chassis of the lathe - one is mounted on an upper chassis bed on top of the main chassis of the lathe - the upper chassis bed is also movable on top of the main chassis of the lathe Max length of workpiece on main chassis: 13 meter Max length of workpiece on top of upper chassis bed: 6,5 meter Max swing in gap using main cross-slide: 4000 mm Max swing over bed usingnbsp;using secondary cross-slide: 2700 mm Max swing over cross-slide: 2220 mm Distance between centers: 13 000 mm Swing over bed: 4000 mm Swing over cross-slide: 2220 mm Diametre of main spindle bore: 95 mm Power on main spindle: 70 kW Weight: 130 ton Max weight between centers: 100 ton
used
KARATS DH-30 CNC Deep Hole Borer Manufactured year 2017 Main specification ● Height from Bed sliding to center of Chuck 2,900 mm ● Swing over bed 5,800 mm ● Drilling capacity 56~650 mm dia ● Distance between center 25,500 mm ● Max. working length 24,000 mm ● Max. workpiece load capacity (with 2 Steady rest ) 380 tons ● Max. workpiece clamping dia 3,400 mm Bed ● Total length of Bed 53,850 mm ● Width of Bed 2,500 mm ● Height of Bed 700 mm Headstock ● Spindle shaft dia 800 mm ● Spindle rotating speed 160 rpm ● Chuck size 2,500 mm ● The clamping dia on Chuck 600 ~1,600 mm ( Design 480~1,680 mm ) Boring head ( A-axis) ● The feed for working 14,000 mm ● Max. feeding 25,870 mm ● Min. distance from Chuck 21,300 mm ● Max.. distance from Chuck 47,170 mm ● Rapid feeding speed 4,000 mm/min ...
new
turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main s ...
new
turning diameter: 440 mm turning length: 1500 mm swing diameter over bed slide: 210 mm Swingdiameter in the bed bridge: 620 mm centre height: 210 mm reus: 21 (20 - 2000) U/min tail stock: MK5 quill stroke: 180 mm diameter of quill: 70 mm spindle taper: DIN 55027 Nr. 8 spindle bore: 62 mm feed: längs 0,04 - 12 m/min feed: quer 0,02 - 6 m/min total power requirement: 7,5 kW weight of the machine ca.: 2430 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0 ...
new
turning diameter over bed:850 mm turning diameter over slide rest:510 mm turning length:3000 mm travel of cross-slide cross:600 mm movement of the upper support:250 mm bed width:600 (Monoblock) mm spindle bore:100 mm spindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/min metric threading:56,1~120 mm feeds - longitudinal:0,08~9,6 mm/min feeds - cross:0.04~4,8 mm/min rapid traverse longitudinal and cross:3640/1800 mm/min tailstock quill diameter:120 mm tailstock quill stroke:250 mm taper in tailstock:6 MK main drive motor:15 kW max. workpiece weight between centers:4000 kg Weight approx.:6800 kg machine width/height:1500x1500 mm machine length:5150 mm 4-jaw independent chuck:800 mm steady fixed:Ø40~350 (mit Rolleneinsätzen) mm fixed steady:Ø100~520 (mit Rolleneinsätzen) mm follower rest:Ø30~120 mm multifix tool holder:Größe C Factory new heavy ...
new
Modell:SDM 850 Varia | SDM 1000 Varia turning diameter over bed:850|1000 mm turning diameter over slide rest:520|720 mm centre distance:2000/3000/4000/5000/6000 mm :1150|1350 mm :350 mm travel of cross-slide cross:600 mm movement of the upper support:250 mm bed width:600 (Monoblock) mm spindle bore:100 mm spindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/min tool holder -shaft diameter:45 mm :90° feeds - longitudinal:0,08~9,6 mm/min feeds - cross:0,04~4,8 mm/min rapid traverse longitudinal and cross:3640/1800 mm/min :900 mm/min metric threading:56, 1~120 mm tailstock quill diameter:120 mm tailstock quill stroke:250 mm taper in tailstock:6 MK main drive motor:15|18,5 kW :16,8|20,3 Kva max. workpiece weight between centers:4000 kg Weight approx.:7200 kg machine width/height:1600x1600 mm machine length:6150 mm (4000 mmSpitzenweite) 4-jaw independent c ...
used
Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...
used
Turning diameter: 2500 mm Center distance: 10000 mm Spindle bore: 0 mm Numbers of bed guide ways: 4 Weight between centres maximum: 100000 kg CNC Brand: _Unknown / Other CNC Model: Bosch MACH-id 588 MAKE Skoda TYPE SIU 250 YEAR 1979 / 2003 SPECIFICATIONS Swing over bed Ø 2500 mm Control Bosch Swing over cross slide 2000 mm Distance between centres 10000 mm Work piece weight 100.000 with steady kg Spindle speeds / ranges 0,32 - 125 Rpm Bed width 3750 mm CNC Bosch Make : Skoda Pilzen Type : SIU 250 Age : 1979 No : Ob 21776 Swing over bed ...
used
NC machine table (X-axis) Travel speed: 0.1 - 30 m/min Travel range: 800mm Tip height: -K version .200 mm grindable workpiece ?: 10 - 250 mm Center width (max. workpiece length): 800 mm NC divider (A axis) possible divisions: 1-999 Accuracy: ?3 angular seconds Workpiece centering by centering tip: Version K MK3 Max. Speed: 80 min-1 NC grinding slide (Z-axis) Feed step: 0.001 mm Input fineness: 0.001 mm Travel speed: max. 2 m/min Travel: 335 mm NC shift axis (transverse movement of the grinding wheel Y-axis) Travel: ? 70 mm Travel speed: max. 1m/min Input fineness: 0.001 mm NC dressing device (B, U and W axis) Working area of the setter: 120 mm x 120 mm Numerically controlled axes: 3 Feed speeds: U-axis: 0-2500 mm/min W-axis: 0 - 2500 mm/min B-axis: 0 - 100 min-1 Step fineness: U-axis: 0.0005 mm W-axis: 0.0005 mm B-axis: 0.025? Grinding spindles (data are based on a maximum cutting speed ...
used
NC machine table (X-axis) Travel speed: 0.1 - 30 m/min Travel range: 800mm Tip height: -K version .200 mm grindable workpiece ?: 10 - 250 mm Center width (max. workpiece length): 800 mm NC divider (A axis) possible divisions: 1-999 Accuracy: ?3 angular seconds Workpiece centering by centering tip: Version K MK3 Max. Speed: 80 min-1 NC grinding slide (Z-axis) Feed step: 0.001 mm Input fineness: 0.001 mm Travel speed: max. 2 m/min Travel: 335 mm NC shift axis (transverse movement of the grinding wheel Y-axis) Travel: ? 70 mm Travel speed: max. 1m/min Input fineness: 0.001 mm NC dressing device (B, U and W axis) Working area of the setter: 120 mm x 120 mm Numerically controlled axes: 3 Feed speeds: U-axis: 0-2500 mm/min W-axis: 0 - 2500 mm/min B-axis: 0 - 100 min-1 Step fineness: U-axis: 0.0005 mm W-axis: 0.0005 mm B-axis: 0.025? Grinding spindles (data are based on a maximum cutting speed ...
used
BRAND: TERRACUBED YEAR: 2022 MODEL: T1000 PRODUCTION HOURS: 250 APPLICATION TYPE: 3D PRINTING LOCATION: LITHUANIA MACHINE TYPE: 3D PRINTER AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: DUET3 Technical Information CONTROL UNIT BRAND: DUET3 MODEL: MB6HC Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - BUILD VOLUME: 1X1X1M - PRINT SPEED: UP TO 1M/S - EXTRUDER FLOW: UP TO 3KG/H - LAYER HEIGHT: 0. 5-2MM - NOZZLE: 1MM, 3MM, 5MM (CURRENTLY EQUIPED WITH 3MM ) - CALIBRATION: 3 POINT TRUE BED LEVELING + 100 POINT MESH BED LEVELING - MOTION: TECNIC SERVO MOTORS AND CONTROLLERS EQUIPPED WITH WEB CAMERA FOR REMOTE INSPECTION CONTROLLER WIRELESSLY - ACCURACY: 0,05MM - ANDROID TABLET IS INCLUDED WITH THE PRINTER QUALITATIVE MACHINE BENEFITS: - MAINBOARD IS DUET3 BOARD. IT'S DETAILS ARE AS FOLLOWS: REPRAPFIRMWARE FOR DUET 3 MB6HC FIRMWARE_VERSION: ...
new
turning diameter: 330 mm turning length: 830 mm swing diameter over bed slide: 196 mm Swingdiameter in the bed bridge: 170 centre height: 165 mm centre distance: 830 mm Turning length in the bed bridge: 430 reus: 16 (70-2000) U/min tail stock: MK 3 quill stroke: 110 mm diameter of quill: 32 mm spindle taper: DIN ISO 702-2 Nr. 4 spindle bore: 38 mm spindle cone: MK 5 feed: längs 32 / 0,052 1,392 m/min feed: plan 3,2 / 0,014 0,38 m/min total power requirement: kW weight of the machine ca.: 0,52 t dimensions of the machine ca.: 1,7 x 0,75 x 1,6 m Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spi ...
used
Description HEYLIGENSTEDT face lathe KH35-CNC with control Sinumerik 840 D Details Serial No. 70000134 Turning diameter over bed carriage 900 mm Turning diameter over bed sheets 1,400 mm Center height above floor 1,480 mm Tip height over bed panels 680 mm Bed width 850 mm Bed height 550 mm Control SIN 840 D Main spindle diameter at front bearing 206 mm Main spindle bore 100 mm max. main spindle torque 15,000 Nm Three-phase main spindle motor 40 kW
used
Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm
used
Tip height over bed top distance of 200 mm 1000-1500 mm Permissible diameter on bed 400 mm Permissible diameter on sled 230 mm bed Bed width 280 mm head Spindle passage 52 mm 6ʺ camlock spindle nose Speed Spindle speed 16 n. Values 36-2000 RPM. Feeding and tapping 72 longitudinal feed 0.05-4.45 mm / rev 72 cross feed 0.025-2.25 mm / rev 54 Whitwort Division 1-56 TPI 54 metric pitch 0.5-28 mm 54 English Division 1-32-1ʺ inch 54 Division of modular 0.25-14 mm 54 pitch Division 2-112 D.P.. Cross slide 470 mm Width 180 mm Maximum stroke 235 mm Cross slide Length 260 mm Width 120 mm Maximum stroke 150 mm Slewing range 360 degrees Counter tailstock Hollow shaft diameter 58 mm Hollow shaft length 265 mm Maximum stroke hollow shaft 120 mm Cone of the hollow shaft 4 C.M.. - MK Motor Power 4 kW
used
Key data: 500 , 1500 , 500
Technical description: Turning diameter over bed 500mm Turning diameter via support 325mm Turning diameter in bridge 630mm Center width 1500mm Bed width 330mm Spindle nose CAMLOCK Gr.8 Spindle bore 80mm Speed levels 15 Speeds 24 – 1600 rpm Metric threads 66 0.5-28mm Inch thread 66 1-56 Module thread 33 0.5-3.5 Diametrical Pitch 33 8-56 Longitudinal feeds 0.072-4.038mm/U Cross feeds 0.036-2.019mm/rev Tailstock MK5 Tailstock pinole stroke 120mm Motor power 380V 5.5KW Weight Approx. 1900kg Equipment: Digital display 3 axes with glass measuring rods. Quick-change steel holder system Multifix compatible Gr.B with 4 pockets, removable bed bridge, lining protection with electr. Locking, foot brake, coolant system, fixed stop, halogen work light, 3-jaw chuck, 4-jaw chuck, clamping disc, lynettes, tips, hardened and ground bed guide tracks, hardened and ground gears, ti ...
used
Metal turning machine make LIEBER type SS / VO / EVYear of construction 1974 with movable upper bed and electrical preselection controlTechnical specifications:Center height: 500 mmTip width: 2500 mmTurning diameter over bed: 1000 mmTurning diameter over cross slide: 750 mmSwing diameter in the crank: 1650 mmCamber length infinitely adjustable: 0 - 1500 mmSpindle bore: 101 mm12 spindle speeds: 6 - 600 rpm.Bed width: 640 mmBed slide guide length: 1020 mmSlide gate width: 350 mmUpper support width: 250 mmUpper support path: 250 mm132 longitudinal feeds: 0,051 - 4,876 mm / min.132 flat feeds: 0.027 - 2.688 mm / min.Gewindevorschübe: 66metric threads: 0,785 - 24 mmWW thread: 1.5 - 46 Gg / 1 Tailstock: MK 6Motor power: 15 kWExternal machine approx: 5000 x 2200 x 2300 mmWith- sliding bed- electrical preselection control- Faceplate Drm. 1600 mm- Leadscrew is missingusedPrice on request.Deliver ...
used
Turning diameter: 5400 mm Center distance: 3200 mm Spindle bore: 10000 mm Numbers of bed guide ways: 0 Weight between centres maximum: 40000 kg 4 bed way heavy duty lathe schwer drehmaschine Merk: 4 Bed Wagner Type: D1600 10 IV 40 Jaar: 60/70/90 er Center hoogte (mm): Swing bed = 3.200 Center afstand (mm): Swing sup = 2.700 Doorlaat (mm): DBC = 10.000 mm Load up to 40 Ton Steadys up to 1.800 4 Chuck 3.000 Double carriage Driven tailstoc Main bearing replaced Renewal Feed / Dro MACHnumber: 597
used
Key data: 500 mm, 200 mm
JANUS HTC2050 CNC lathe was built in Poland in 2010. The machine, characterised by high stability and operational reliability, uses the necessary equipment for high-speed and finishing machining, allowing for precise machining of internal holes, columns, cones, arches and all types of screw threads. The machine uses a high-speed spindle with infinitely variable rotation speed from 40 to 4000 rpm and a bed inclined by 45°, which facilitates chip removal and increases the cutting force transmitted by the horizontal bed and its head. Rear and front spindle angular contact bearings simultaneously transfer radial and axial loads, ensuring low spindle temperature rise and less thermal deformation during high-speed finishing. The JANUS lathe equipment includes a state-of-the-art FANUC Series 0i Mate-TC CNC controller, a chip conveyor and the tools shown in the photos. The total weight of th ...
used
workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...
new
Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...
used
turning length: 1000 mm turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm number of spindle speeds: 25 - 2000 U/min. turning speeds: 18 Stk. spindle bore: Ø 56,0 mm tailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mm bed width: 310 mm spindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/U feeds - cross: 0,011 - 0,4 mm/U thread: M 0,3 - 10,0 mm voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: 1600 kg range L-W-H: 2320 x 1400 x 1600 mm Machine from a workshop for the disabled Lathe with precision ground and induction hardened bed. Very suitable e.g. for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - 2 axis HEIDENHAIN digital display, front left - FORKARDT 3-jaw chuck Ø 200 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel h ...
used
turning length: 1000 mm turning diameter over bed: 430 mm turning diameter over slide rest: 235 mm spindle turning speed range: 11.2 - 2000 U/min spindle bore: 56,0 mm morse taper: 4 MK quill stroke: 135 mm bed width: 333 mm spindle taper: DIN 55022 Gr. 6 total power requirement: 7,75 kW weight of the machine ca.: 1950 kg. dimensions of the machine ca.: 2700 x 1200 x 1600 mm from a workshop for the disabled () Furnishing: - robust master/feed spindle machine - FORKARDT 3-jaw chuck Ø 200 mm (DIN 55027 size 6) - HEIDENHAIN digital display - MULTIFIX steel holder, with insert - Movable tailstock - chuck key - chip rear wall - sliding bed stop - Protection for bed rails - live center - Coolant device, with drip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Brand: LINDEMANN, Model: LU 1250/10, Dimensions in mm (LxWxH): approx. 22300 x 10300 x 7935, YEAR OF CONSTRUCTION: 1997, Weight: approx. 298 t, Pre-press bed:, Model: PA 75/25, Case length: 7500mm, Filling width: 2500 mm, Clear bed height: 1200mm, Height of side press: 800 mm, Pressing force of the side press; 4000kN, Pressing force of the cover (middle) 4400kN, Feeding bed pusher pressing force: 1000kN, SHEARS:, Max shear force: 12500kN, Knife opening - width: 1000 mm, - height max: 1050mm, - height min: 840 mm, Knife bevel on one side: 12 degrees, Hydraulic, one-sided rammer, Pressurized fluid:, Required oil quantity: approx. 12200 litres, Oil quality: HLP 46, Max. operating pressure: 315 bar, High pressure: 315 bar, Low pressure: 90/135 bar, Main drive, Engine/Electro, 6 x 90 kW, Speed: 1500 rpm, Type: Three-phase current, Operating voltage: 400V/50Hz, Design: IM2002, Protection class ...
used
C 6250 x 2000 conventional lathe was manufactured in 2010 in China. The machine, characterised by a rigid design with an induction-hardened bed significantly increases the production capacity of any workshop and factories with the utmost precision. The spindle, with adjustable speed from 11 to 1600 rpm is driven by a reliable and high-powered main motor, which is used for versatile tool use. The C 6250×2000 universal lathe with digital readout in three axes weighs 2640 kg. Technical data of the C 6250 x 2000 metal lathe - maximum workpiece length: 2000 mm - turning length in bridge choice: 210 mm - workpiece diameter (turning in bridge choice): 720 mm - workpiece diameter (turning above bed): 500 mm - workpiece diameter (turning over slide): 300 mm - longitudinal feed range: 0.028 – 6.33 mm/rev - transverse feed range: 0.014 – 3.16 mm/rev - maximum spindle speed: 1600 rpm ...
used
turning length: 1000 mm turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm number of spindle speeds: 25 - 2000 U/min. turning speeds: 18 Stk. spindle bore: Ø 56,0 mm tailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mm bed width: 310 mm spindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/U feeds - cross: 0,011 - 0,4 mm/U thread: M 0,3 - 10,0 mm voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: 1600 kg range L-W-H: 2320 x 1400 x 1600 mm Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder - size B - with 3x inserts - movable tailstock, including keyless chuck - Chip protection back wall - EMERGENCY stop button at the front ...
used
Heavy Precision Lathe Manufacturer: Colchester Type: Mastiff 1800 Year of construction ca 2000 Center width 1500mm Effective turning length 1400mm Turning diameter over bed 560mm (can be enlarged to 830mm by removable machine bed) Turning diameter over face carriage 370mm Spindle bore 90mm Spindle Nose D1-11" Camlock Morse Taper No. 5 MT Spindle speed selectable in 3 ranges (rpm) 18-200 55-605 160-1800 Drive power 11kW Tailstock MK6 Fill travel 178mm Tapping: Metric 0.2-14mm Inch gradients TPI 2-84 TPI Module pitches 0.2-3.5 module Feeds (X and Z axis) Metric 0.04-2.8mm/rev Inch 0.0016-0.110 inch/u Machine weight approx. 2670kg Dimensions (LxW) 3200x1700mm The machine was optically prepared and technically tested. The geometry of the machine is still very good. A rotation test was carried out and the bed was measured with a dial gaug ...
used
Description: Center height 1040 mm, center width 985 mm, max. turning length 800 mm, max. turning diameter over bed 650 mm, over face slide 450 mm, working spindle diameter in front bearing 120 mm, spindle head size 8, spindle bore 88 mm, max. chuck diameter 200 mm, tool system TWS/40, bed width 985 mm, max. turning length 800 mm, max. turning diameter over bed 650 mm, over face slide 450 mm, working spindle diameter in front bearing 120 mm, spindle head size 8, spindle bore 88 mm, max. chuck diameter 200 mm, tool system TWS 12/40, 1 bed slide, longitudinal stroke 887 mm, face stroke 270 mm, tailstock quill taper 4, quill diameter 100 mm, max. quill stroke automatic 140 mm, feed speeds longitudinal slide/face slide each 0.5 to 5000 mm/min, rapid traverse longitudinal/face each 15 m/min, feed force longitudinal 6000 N, face 5000 N, spindle speed 0 to 5000 rpm weight approx.: 6,000 kg, App ...
used
turning diameter:630 mm turning length:2850 mm control:Fanuc 0i-mate MGI swing diameter over slide rest:350 mm bed width:550 mm spindle nose:D11/1:20 spindle bore:104 mm spindle speeds::17-1000 U/min transmission ratio:autom. 4-stufig rapid power traverse in X-and Z direction:4/8 m/min tailstock quill taper MT:5 Morse Quill travel:200 mm diameter of quill:100 mm workpiece accuracy:6-7 ITF x-travel:320 mm z travel:3000 mm chuck size:315 mm dimensions:5200 x 1900 x 1900 mm :6 t power capacity:11 kW CNC controller:FANUC 0i mate TC 3 jaw chuck Ø:315 steady rest:2 Stück frequency control main spindel engine:11 kW turret:8-fach Flat Bed CNC Lathe Flat Bed CNC Lathe, CAK63/80 Series CAK 63/80 series CNC lathes integrate proven structure, stable functionality, and reliable quality to make an economical, practical, universal machine. They are widely used in such industries as automotive, petr ...
new
:HBM-130XL spindle diameter:130 mm x-travel:2000 mm y-travel:1800 mm z-travel:(ohne Gegenhalter) 2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3136 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:10 t table-size:1800 x 1600 mm T-slots:11 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:29300 kg main drive:15 kW Machine size (LxWxH):7030x4665x3800 mm 2-Axis DRO :von NEWALL f. X- und Y-Achse Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position ...
new
:HBM-130 | HBM-130L | HBM-130XL spindle diameter:130|130|130 mm x-travel:1600|2000|2000 mm y-travel:1400|1800|1800 mm z-travel:2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3200 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:8|10|10 t table-size:1600 x 1400|1800 x 1600|2200 x 2000 mm T-slots:9/11/12 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:22,5|24,5|25,5 t main drive:22 kW Machine size (LxWxH):6995/3647/342|7030/4665/3800|7030/4665/3800 mm PLC control:Siemens S7 servo motors:von Siemens/Fanuc/Fagor Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower mainten ...
used
Model:2012, 1500mm Spindle:115 mm, Over Counter Diameter: 580 mm, Swing Diameter on Support: 300 mm. Bridge Gap Diameter 740 mm. DIAMETER Counter Width: 700 mm, Transverse Support Width: 460 mm, Turning Size Net:1500 mm, SPEED INTERVALS: 16 STEPS / 26 - 2000 rpm. ENGINE POWER: 7.5 KW Sleds are clean. ( FIXED and TRAVELING BED ) 3x 300 Mirror, 3x 200x Mirror HIGH PRECISION RADIP ENGINE / SERIAL MOVEMENT WATER AND LIGHTING EQUIPMENT BACK SHEET AND MIRROR PROTECTION AND CHIP SPRINGS IT IS ON THE SHEDDING HOUSING. FLANGES, TAILS, KEYS and FULL tool kits are available. Fixed bed, floating bed and special pipe bed in different large diameters (2 pieces), Rapid on Transverse Support, There are double-stage and rapid (fast movement) tailstock. Swich Stopper Feature for Occupational Safety. ( EMERGENCY STOP BUTTON ) It has been used very little and cleanly. HIGH SP ...
used
Technical data: Capacities: Height of centres over the flat way: 625 mm Height of centres over the flat floor: 1225 mm Swing over bed: 1250 mm Swing over carriage: 940 mm Diameter of four-jaw chuck: 1250 mm Only range of the chuck min/max: 230/1050 mm Distance between centres: 5000 mm Headstock: Spindle bore: 105 mm Spindle seat: cyl. 105 Diameter of the spindle in the front bearing: 320 mm Number of spindle speeds: 24 Overall range of spindle speeds: 1.6-315 rpm Spindle drive motor rating: 75 kW Maximum torque of the spindle: 63000 NM Carriage: Of the bed width: 1100 mm Length of the saddle: 1320 mm Of the cross slide width: 550 mm Travel of cross slide: 800 mm Travel of tool slide: 600 mm Number of feed Council for each range: 20 Overall range of longitudinal feed Council: 0.18-160 mm / rev Range of longitudinal feed Council at: -high range of spindle speeds: ...
used
Bed feeding machine - Universal AUERBACH FBE 2000 Bearing No. 1105-01972 Category Bed frit machine - Universal Make Auerbach Type 2000 FBE Built in 1996 Condition Used machine Control CNC Heidenhain TNC 415 Storage location FRANCE Country of origin Germany Delivery time by appointment Freight base from stock Technical details x-way 2000 mm y-way 900 mm z-way 900 mm Table size 2100 x 800 mm Tool holder SK 50 Spindle speed: 30 - 3500 rpm Control Heidenhain TNC 415 Spindle drive 29/22 kW Feed speed 1 - 6000 mm/min Rapid speed 15 m/min Total power requirement 42 kVA Machine weight approx. 12.5 t Room requirement approx. 7.7 x 5.5 x 3.0 m Description 3-axis bed-feeding machine With MANUELER two-axle universal head , - vertical level 360 x 1 degree - 45" level 360 x 1 degree
new
Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...
used
Manufacturer: ERFURT - Niemcy 2 PIECES AVAILABLE Model: PKZV I 1250 Condition: Very good, complete, under power Technical details Table: 4000 x 1800mm Press weight: 230T Force: 1250T Slide stroke: 630mm Centres of pressure: 2 Adjustability of slide: 630mm Max delight between bolster and slide: 1165mm Width beteen columns: 4000mm Slide area: 3950 x 1800mm Bed area: 4000 x 1800mm Opening in bed: 3750 x 1300mm Main motor power: 132kW Idle stroke rate: 11 per minute Counter pressure of cushion in bed: 250T Stroke of cushion plate: 250mm
used
Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...
used
Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...
new
Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...