bed type milling used for sale

General SKU337T903 LocationBarneveld MakeKMPT process technology TypeHZ 100/1.6 Si No.60000886 Year of construction2007 Main Features MaterialStainless steel Motor37 KW Inlet diameter65 mm Specified Features - Peeling centrifuge Peeler centrifugesyphon type Capacitynett: 157,5 Ltr. Basket sizesDia: 1250x700 mm Wall thickness20 mm Max. loading weight308 kg Motor37 kW, 400v, 1470 rpm, (ex) Max. basket speed1520 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck InletDN 65 Solids outletDN 250 Liquid outletDN 125, DN 50 MaterialStainless steel 1.4404 (316L), Stainless steel 1.4462 (Duplex2205) Information Mounted on framecheck Total height3,5 m Weight5760 CEcheck Floorspace5,35x4,5 m ATEX compatiblecheckPeeling centrifugesAndritz KMPTCentrifuges > Peeling centrifugesBrand > Andritz KMPT What you can expect from Foeth: -- Machine is in work ...

General SKU366W1572 LocationBarneveld MakeKrahnen TypeAirflex 30 type 4 No.3405030 Year of construction2009 Main Features MaterialStainless steel Specified Features - Miscellaneous MaterialStainless steel Capacity470 mm MotorAir Information Total height1,12 m Weight69 kg CEcheck Floor space0,60x1,50 m ATEX compatiblecheck Extra SpecificationsSuction width 650 mm, brush width 470 mm, tank volume 21 l., dirty tank volume 25 l., air cap. 61-90 m3/h, suction cap. 148 m3/hMiscellaneousKrahnenMiscellaneous > MiscellaneousBrand > Krahnen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU316X529 LocationBarneveld MakeJäckering TypeUnknown Main Features Motor30 KW Inlet diameter170 mm Width550 mm Specified Features - Fine Impact Mill MaterialMild steel, Stainless steel Fine Impact Mills Grindercheck Rotor size530 mm (4 rotors stacked) Grinding room sizeDia 540 mm x 700 mm With grinding platenscheck With hoppercheck 250x250x240 mm InletDia. 170 mm Feeding with vibro feedercheck Motor30 kW, 400/690 volt, 1465 rpm Speed2500 rpm Information Year of constructionUnknown Mounted on framecheck With switchcheck Floor space2,10 x 0,80 m Total height1,70 m Weight1800 kg Extra Specifications- With screw conveyor, 0,37 kW, 230/380 volt, 695 rpm - estimated output 150 kg/h: water evaporation ± 60 kg/h Fine Impact MillsJackeringMills > Fine Impact MillsBrand > Jackering What you can expect from Foeth: -- Machine is in working condition -- At a r ...

General SKU429T1358 LocationBarneveld MakeBrabender OHG Duisburg Main Features Inlet diameter15 mm L/D25 Specified Features - Viscosity test machine Single screw extrudercheck (and with double) Screw diameter± dia.15 mm L/D± 25 Number of heating zones:1 With jacketcheck Air coolingcheck Inlet± Ø 15 mm Feeding with hoppercheck Max. temperature500 °C Viscosity test machines MaterialStainless steel Information TypePlasti-Corder PL2000, Eurotherm Type 808 No.814 300 Floorspace1,45x0,55 m Total height0,8 m Weight280 kg Extra Specificationswith two diffirent extruders headsViscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...

380 V, 50 Hz, 2.2 Kw Volume flow 2230 m³/h Suction nozzle 160 mm Pt 2180 Pa

Emulsifier Karl Schnell Type: 250 Voltage: 400V / 50Hz Dimensions: 160x130x190cm

Thickness planer PANHANS type 425 510mm is optically and technically in very good condition, the machine comes from an assembly company and has been used only a little, everything is in its original condition, nothing has been repainted, the machine has only been cleaned everything works perfectly with non-return protection the planer blades can be adjusted very easily and very precisely, there are adjustment gauges that can be screwed onto the knife shaft, which ensures the highest precision the chips can be discharged very well through the closed system with 4-knife shaft for normal strip planer knives The thickness table is mounted on 2 trapezoidal spindles to prevent tipping and torsion. with protective cover that can be opened upwards max. planing width 510mm, max. planing height 250mm the machine will be delivered and demonstrated by us personally throughout Germany for ...

For sale is a high-quality table saw of the brand Ulmia, type 710 SN, serial number 10708, built in 1995. The machine comes from the renowned German manufacturer Ulmia and impresses with its robust design, precision and durability - ideal for carpenters, workshops or demanding craftsmen. Details: Manufacturer: Ulmia Type: 710 SN Serial Number: 10708 Year of Make: 1995 Operating voltage: 380 V The table saw is in used, functional condition and has always been used reliably. Ulmia machines are known for their precise cutting performance and solid construction, which makes this saw a stable and powerful solution even today. Ideally suited for precise longitudinal and cross-sections in the professional woodworking sector. Viewing and test run possible by arrangement.

For sale is a Veit Tunnel Finisher 8657 with inbound and outbound transport Price from stock Külsheim 19.500 € In addition, the steam generator and compressor can be can be requested

17.10 m Jungheinrich Type T pallet rack Manufacturer: Jungheinrich Type: T Shelf height: 5600 mm Shelf depth: 1100 mm Shelf length: 17100 mm Span: 2700 mm Storage direction: Longitudinal storage Number of fields: 6 Euro pallet storage capacity: 72 Number of compartment levels: 4 (incl. floor parking space) Shelf width: 2700 mm Shelf load: 3000 kg Field load: 12,000 kg Scope of Delivery 07 x Jungheinrich stand 5600 x 1100 mm blue welded truss 36 x Jungheinrich Truss 2700 mm yellow More items - new and used - can be found in our shop! International shipping costs on request!

Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm - Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 - Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 - Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 - Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 - Radius 60 / Radius 62 /  - Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 -    

Seamer Angelus type 62H with 6 seaming heads the speed range is: min. 220 cans / min up to max. 700 cans / min. year of manufacturing: 2021 for lid size: 202 stainless steel machine with door interlocks incl. automatic oil lubrication recirculating and filtration system incl. touchscreen control panel

gebr. Stone Forming Machine/Board Paver, Manufacturer Zenith Type 860 AZ Production of core & attachment Simatic S5 control system with vitalization from Zenith Board size 1,400 x 950 mm max. production height 14 cm Quick Forming Clamping Pneumatic incl. complete circuit with: Aerial ladder Vehicle Group Drying rack Countersunk ladder Stone Remover Packager Board stacking transverse transport Board stacking device Board tray Parcel trolley circulation Parcel Magazine Horizontal strapping

In very good condition! All stainless steel, new seals, incl. complete connections (ball valve milk thread DN 40, pressure gauge, vent valves, etc.). Incl. deflection plate and extension arm (for operation with fewer plates). Contains 40 plates for 40x40cm layers.

Magurit Model 348, fully overhauled

DELTA Hand Winch Type HW 0.5t. Bj 2022, used, ready for use

- All axels are steering - 4 shaft with 8 wells = 32 units - Left and Right boom triangle use

MTU Diesel Generator Engine Model: EZ531, Type MB16v652 Year of manufacture: 1973 Output Current: 192 A Rated (full) power: 1,680 kVA Generator Model ASEA GF 630L

Stitch type: double lockstitch, number of needles: 2, max. stitch length: 12mm, sewing speed: 2500stitches/min, presser foot lift height: 9mm, clearance A/B: 10mm/20mm, needle spacing range: 3mm-30mm, needle system: 134-35. Machine dimensions X/Y/Z: approx. 1100mm/600mm/1700mm, weight: approx. 75kg. On-site inspection is possible.

electromechanical sheet metal shears brand RAS type 83.20. Year of manufacture 1994. Cutting length 2040mm up to 3mm thickness Digital measurement of the rear stop 790mm. Sheet metal holder along the entire length - repair (adjustment) required. Rear pneumatic supports. Power 5.5 KW weight 2050kg.

Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible.

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

WALTHER TROWAL - Type CA 340 -Speed range 800 - 1500 rpm -7.5 KW - Drive power -Separation facility -Soundproof cover -Control / Start / Stop / Timer / Separate Dimensions: LxWxH: 1.8x1.6x1.8 meters / Weight 1300Kg

General SKU305S481 MakeWalter Brucks (D) LocationBarneveld Type8 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter625 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Pan diameter950mm Pan depth580mm In-/Outlet625mm Pan can be tiltedcheck Motor0,55 kW 380/220 Volt (Ex) Information No.3901 Year of construction1969 Floorspace1,4x1,0 M Total height1,6 M Weight300 Kg ATEX compatiblecheckCoating pansWalter BrucksCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This MAYER Otto Meyer Type PS80P was manufactured in 2019. A robust panel saw with a cutting length and width of 4300 mm each, powered by a 9 kW main motor. Features include optimized travel speeds via an additional frequency converter and an automatic electronic clamping detection for panel corners. Consider the opportunity to buy this MAYER Otto Meyer Type PS80P panel saw. Contact us for more information.

General SKU276P415 MakeGericke (CH) Type50 No.50.2154 Year of construction2002 LocationBarneveld Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4541 (321) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionshopper (D500xd180xh700mm), with butterfly valve and actuator Outletdia.50mm, with butterfly valve and actuator Information Mounted on consolesmobile Floorspace1,1x0,8 M Total height1,8 M Weight220 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine  ...

General SKU256N198 LocationBarneveld CEcheck MakeGMF GOUDA TypeDisc Pastillator DP20/2 Main Features MaterialStainless steel/Coated Specified Features - Belt cooler Cooling beltø 2000 mm rotating discs (2x) With motor1,5 kW Belt can be cooledcheck Feeding drop dosing devicecheck With scrapercheck Outletø 150 mm MaterialStainless steel Information No.DP 47-2-1 Year of construction1997 With switchcheck Floorspace6,6 x 3,3 m Total height3,3 m Weight6000 kgBelt coolersGMF GoudaBelt coolers > Belt coolersBrand > GMF Gouda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU276P416 MakeGericke (CH) Type50 No.2003 Year of construction1992 LocationBarneveld Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4571 (316Ti) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionshopper (D600xd180xh700mm) with butterfly valve with actuator Outletdia.50mm, (butterfly halve with actuator) Max. temperature80 degr.C Information Mounted on consolesmobile Floorspace1,2x0,8 M Total height2,0 M Weight220 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

General SKU305S482 MakeWaltter Brucks (D) LocationBarneveld TypeVIII G Main Features MaterialStainless steel Motor0.55 KW Inlet diameter635 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Pan diameter950mm Pan depth580mm In-/Outletdia. 635mm Pan can be tiltedcheck Motor0,55 kW 380/220 Volt Information No.5105 Year of construction1975 With switchcheck Floorspace1,3x1,2 M Total height2,0 M Weight350 KgCoating pansWalter BrucksCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

FASTI Type 63x1.5 Beading Machine -Condition / Mint -Upper beading roller hydraulically adjustable -Control panel -Various beading tools -Hydraulic power unit Dimensions: Cjbkn Aswxfz Doug Nogw LxWxH 1.6x0.8x1.7 meters / Weight 1200Kg

WALTHER Trowal Type CA 650 -Drum diameter 1600mm -Speed 1450 rpm -Timer -CENTRIFUGE -Soundproof cover -Stair landing -Power 11KW Hebkswbtdlon Au S Tsl

turning speeds: 450 / 700 / 1.400 U/min transmission ratio: 3 output: 0,2 / 0,5 / 0,6 kW current: 0,6 / 1,0 / 1,1 A table surface area: 540 x 390 mm 0: 380 V / 50 Hz chuck: RÖHM / 165 mm Brush diameter: 235 mm dimensions: 0,80 x 0,44 x 1,13 mm weight: - kg Brushing Machine HAHN & KOLB - UVM Type 2 - incl. braking system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

8-fold cartridge filter housing with new filter elements on request for an extra charge

Key data: 5000 , 2050 , 80

Presse à injecter SANDRETTO 500 T Serie 7 Type : 3270/500 Force de fermeture : 500 T Diamètre vis : 80 mm Volume théorique d'injection: 2110 cm3 Poids de l’injection en PS : 2050 gr Longueur utile de la vis L/D : 20 Capacité de plastification : 290 kg/h Zone de chauffe : 4 Puissance total de chauffage : 31 KW Epaisseur moule min/max : 250-800 mm Course plateau mobile : 830 mm Passage entre les colonnes : 720 x 720 mm Capacité réservoir d’huile : 500 L Dimensions : 9,0 x 1,80 x 2,50 m Poids total : 25 000 KG

Sandretto Serie 9 type 4170/500 - 500 T Year : December 2002 Clamping Force : 500 T Screw Diameter : 80mm Injection Volume : 2056 cm3 Injection Pressure : 2027 bar Platen Sizes : 1300 x 1300 mm Distance Between tie bars : 900 x 900 mm Tie Bar Diameter : 150mm Min/max mold high : 300 / 1000 mm Moving Platen Stroke : 950mm Ejector Stroke : 380mm Oil Filling : 900 Litres Dimensions : 8520x2660x2165 mm Weight : 21,000Kg

The Karl Schnell Type 046 KS FV-SERIES Emulisifer is designed for the fine art of fine emulsion; premincing, vacuumizing, mixing and emulifying all in one machine. Designed for the production of small batches, this machine of the FV-Serie complete thus the versatile KS offer which result in a constant quality level of the final product, creating of stable and homogeneous emulsions, flexibile applications and high productivity. This machine is previously used in a processed cheese plant in Europe. Hopper inside diameter 550 mm and inside height 400 mm. Volume of the hopper: ± 30 liter. The hopper has a direct steam injection nozzle, double jacketed and can handle vacuum. Motor: 4,1 / 8,2 / 14 kW - 120 / 230 / 400 V - 32 / 31 / 31 A - 710 / 1.440 / 2.550 rpm - 26 / 50 / 87 Hz. Simple control panel with buttons., Type of Machine: Emulsifier, Volume hopper: ± 30 liter, Motor: 4,1 / 8,2 / 1 ...

Manufacturer: Probat Model: Probatone 12 / Type 2 Year of Manufacture: 2016 Type of Machine : Coffee Roaster Load capacity: Max. 15 kg Fuel: Natural gas Motor: New motor installed Centrifugal fan: New – DMV 300 WS-TS 300 degrees – installed Air filter: Probat air filter included Inspection: Annual inspection by Probat Roast software: Probat roasting software Cropster: Cropster connection – automatic roasting mode possible Artisan: Artisan connection – automatic roasting mode possible Find more here - / Contact us at -

ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...

Key data: 350 , 53 , 28

BOY 35 E injection molding machine Type : 350-92 35E?Year: 2014?Screw diameter : 28 mm?Injection pressure: 1639 bars?Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr?Clamping Force: 35 T?Distance between tie bar bar: 280 x 254 mm?Mould installation height min : 200 mm?Plate distance max : 500 mm?Dimensions: 2400 x 820 x 1950 mm?Weight: 1195 kg

Manufacturer: Hartner Model : Bagstor-HT Type 3-3024 Year of Manufacture : 2013 Machine Type : Big Bag Storage System Storage Capacity : 24 m3 Bunker Length : 5 metres Find more here - / Contact us at -

Mower, lawn mower, cutter bar, disc mower -Handed over in current condition as seen and unchecked from storage -Sold: 9 pieces of lawn mower -Price: complete for all 9 lawn mowers -Manufacturer: EDE 1648P, SABO 43-130H, Wolf 6.36E, MEP TV 460SP, Fleurelle E451, Gutbrod Superior, Kynast V48H, Ering -Petrol and electric lawn mowers -Weight: 232kg

Flange connection, V-flange, pipe flange -Pipe flanges/welding neck flanges: 81 pieces -Type: DIN EN1092-1 16 different versions see photos / parts list -Material: P235 GH -Price/tax: complete -Weld neck flanges: please inquire about other sizes in stock -Transport dimensions: 1200/800/H200 mm -Weight: 467 kg

Terminal block, terminal block, feed-through terminal block -approx. 1240 pieces: various clamps -1x: 1770370000 ZDU 4-2/2AN -1x: 1651980000 ZIA 1.5/3L-1S -3/4 Package: 1632080000 ZPE4 -5x: 1632050000 ZDU4 -2x: 1775480000 ZDU1.5 -1x: 1867180000 ZP2.5/1AN/11GN/BE -5x: 1652030000 ZIA1.5/4L-PE -5x: 1/2x 1867190000 ZP25/1AN/12GN/BE -5x: 1652030000 ZIA1.5/4L-PE -4x: 1815590000 ZP2,5/1AN/13 Price: complete -Weight: 16.5 kg

Terminal block, terminal block, feed-through terminal block -1x: 1705921000 -1x: 1608880000 -4x: 1650370000 -1x: 1650370000 -2x: 1650360000 -3x: 1752080000 -1x: 1054460000 -2x: 1705941000 -2x: 1867190000 -1x: 1772060000 -2x: 1651970000 -Price/Sale: complete -Weight: 5 kg

Dowel and slotted hole drilling machine HOFFMANN HT 200 very good condition, the machine comes from an educational institution, has been used only a little and is as good as new, it has very few signs of use this allows slotted holes to be milled and dowel holes to be drilled, and the drilling height can be read very precisely on a digital counter with 3 drill bit holders: for drills with M10 external thread and for drills with 12mm and with 16mm shank, plus you get a 2-jaw chuck for drills from 3- 20mm with workpiece auxiliary supports on the left and right, which can be swivelled and have a carrier roller the machine has a landing gear with 2 angle stops on the machine table for left and right The clamping arms can be moved and moved with stake-out device for parapet railings, which is adjustable from 80-160mm and has a digital counter, with pick-up mushroom 380V, 1400 and  ...

For sale is a small complete filling line for vinegar or oil in plastic bottles. Currently, the line is at 0.75 ltr. cylinders and has a maximum output of 4,000 bottles/h. The entire plant consists of the machines listed below: 1. Bunker for empty plastic bottles, about 6m long, capacity: about 400-600 containers 2. Kamman bottle sorting system type K23F Machine ensures that the bottles to be filled are transported out of the machine vertically, with the mouth facing upwards Sorting capacity: approx. 3,000-6,000 pieces/h 3. Conveyor belts 4. Leicht vacuum filler, make Cobert type Olimpia20/95 With 20 filling stations Dimensions: LxWxH: 1,520x1,250x2,330 mm Possible bottle diameter: 55-120 mm Built in 1989 6. Inkjet encoder, make REA-JET, for applying the lot marking or best-before date coding to the filled and sealed bottle Year 2008 5. Capper for plastic c ...

Sangati plansifter with standard frame 8 passages 3 x B1, 3 x B2, 2 x C1, Rebuilt using the previous. Screen stack, new inlet benches, new outlet nozzle with rubber lid and 32 GRP rods ø 12 mm (red) - 3.6 m long.

: neu : 2025 : 020177 : prompt, Zwischenverkauf v : Türkei : 880 € : 1 : 50 kg : 0,05 to : 30 mm : 700 mm : 100 mm : 80 mm Without drive, idling rollers Manual adjustment of the centre distance The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.