bed mil used for sale

General SKU397X1156 MakeNiro-Aeromatic LocationBarneveld TypeT6 spez Main Features MaterialStainless steel Volume540 Ltr. Motor20 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan2x With pan mounted on wheelscheck Capacity540 l. Pan sizesø 1280 x 550 mm Can be heated by steamcheck With fancheck Capacity2 m³/s Motor2,0 kW, 380 V With dust filtercheck Filter surface21 m²: Fine dust filter: 38,6 m² MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) General No.909003 Year of construction1990 Extra SpecificationsHeating capacity:&:nbsp:208.3 kWSteam overpressure:&:nbsp:4 barMax. allowable operating overpressure:&:nbsp:6 barTest overpressure:&:nbsp:7.8 barMax. steam consumption:&:nbsp:356 kg/hAverage steam consumption:&:nbsp:190 kg/hPowdered foodsGeneric medicinesFluid bed dryers batchStarchBiotechnologyCatalysts & fillersF ...

General SKU397X1155 MakeNiro-Aeromatic LocationBarneveld TypeT6 Main Features MaterialStainless steel Volume540 Ltr. Motor20 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan2x With pan mounted on wheelscheck Capacity540 l. Pan sizesø 1280 x 550 mm Can be heated by steamcheck With fancheck Capacity2 m3/s Motor2,0 kW, 380 V With dust filtercheck Filter surface21 m²: Fine dust filter: 38,6 m² MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) General No.929057 Year of construction1992 With switchgearcheck Extra SpecificationsHeating capacity:&:nbsp:208.3 kWSteam overpressure:&:nbsp:4 barMax. allowable operating overpressure:&:nbsp:6 barTest overpressure:&:nbsp:7.8 barMax. steam consumption:&:nbsp:356 kg/hAverage steam consumption:&:nbsp:190 kg/hPowdered foodsGeneric medicinesFluid bed dryers batchStarchBiotechnologyCata ...

General SKU397X1157 MakeNiro-Aeromatic LocationBarneveld TypeT6 Main Features MaterialStainless steel Volume540 Ltr. Motor20 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan2x With pan mounted on wheelscheck Capacity540 l. Pan sizesø 1280 x 550 mm Can be heated by steamcheck With fancheck Capacity2 m³/s Motor2,0 kW, 380 V With dust filtercheck Filter surface21 m²: Fine dust filter: 38,6 m² MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) General No.879012.1 Year of construction1986 Extra SpecificationsHeating capacity: 208.3 kW Steam overpressure: 4 bar Max. allowable operating overpressure: 6 bar Test overpressure: 7.8 bar Max. steam consumption: 356 kg/h Average steam consumption: 190 kg/hPowdered foodsGeneric medicinesFluid bed dryers batchStarchBiotechnologyCatalysts & fillersFeed additivesOther pharmaceuticsCo ...

General SKU397X1154 MakeNiro-Aeromatic LocationBarneveld TypeT3 Main Features MaterialStainless steel Volume123 Ltr. Motor7.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Granulatorcheck With pancheck With pan mounted on wheelscheck Capacity0,123 m³ Capacity0,186 m² With sprayer(CIP) Can be heated by steamcheck With fancheck Capacity0.5 m³/s Motor7,5 kW 380/660 V (EEx E II T3) With dust filtercheck Filter surfaceExhaust filter 3.5 m²: HEPA supply air filter 36 m² MaterialStainless steel 1.4305 (303), Stainless steel 1.4552, Stainless steel 1.4301 (304), Stainless steel 1.4306 (304L) General No.919054 Year of construction1990 With switchgear(as is) Floorspace7,6 x 0,78 m Total height3,5 m Extra SpecificationsFilter housing – explosion pressure resistance (pressure shock resistance): 10 bar(g)Exhaust air filter – filter area: 3.5  ...

: 9 St. : kg : ca. 750 x710x1020 mm weight: 180 kg drawer measurements: mm Colour: 6011 RAL Large drawer usable space ...x... mm Full extension drawer runners (VA) 100% 2 drawers with internal height 30 mm 2 drawers with internal height 55 mm, 2 drawers with internal height 80 mm, 2 drawers with internal height 130 mm Ball bearing drawer runners Individual pull-out stop Individual locking possible for each drawer TÜV GS tested Drawers flush with cabinet, recessed handles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU005B167 MakeGlatt AG Pratteln TypeUniglatt No.4110 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Volume3 Ltr. Motor1.1 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan2x Pan sizesø 140 x 165 mm Capacity0,1 — 3,0 kg With sprayercheck With electric heating4x 440 W With fancheck Motor1,1 kW, 380 V With dust filtercheck MaterialStainless steel 1.4301 (304) General Mounted on wheelscheck With switchcheck Floorspace0,7 x 0,7 m Total height1,9 m Weight350 kgPowdered foodsGeneric medicinesFluid bed dryers batchStarchBiotechnologyCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarDairySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicGlattIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesDryers > ...

General SKU049Z226 MakeGlatt AG Pratteln TypeWST-CD 120/200 No.101015 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryer(1x) With pancheck Capacity500 Ltr Pan sizesdia. 1200x550mm, Pan with rotating bowl-mesh Capacity120-300 KG per batch Can be heated by steamcheck Without fancheck With dust filter:Air Handler Unit: MaterialStainless steel 1.4401 (316) General With switchgear(as is) Total height7,5 M Extra Specifications- With product discharge silo - With rotary valve for discharging and dosing - With CIP cleaning unit Technical specs Extra informationPan with rotating bowl-meshPowdered foodsGeneric medicinesFluid bed dryers batchStarchBiotechnologyCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarDairySolid pharmaceuticsDy ...

General SKU050F242 MakeGEA Aeromatic-Fielder UK TypeTSG-2-B5-F4, Spray arm/nozzle is missing LocationBarneveld CEcheck Specified Features - Fluid bed dryer batch Material finishMirror polished inside Main Features MaterialStainless steel Volume47 Ltr. Motor3 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan mounted on wheelsPan equipped with :non-sifting Gill plate: Capacity47 Ltr. Pan sizesø 460 x 500mm With pumpcheck Can be heated by steamcheck With fanmake Meidinger, type HA-100-M3/825 Capacity360 m³/h Motor3,0 kW, 400/690 V (IP55) With dust filtercheck MaterialStainless steel 1.4401 (316) General No.869500 Year of construction1998 With switchgear(as is) Floorspacedryer 1,2 x 0,9 m Total height3,1 m Weight2000 kg Extra Specifications- spray arm is missingPowdered foodsGeneric medicinesFluid bed dryers batchStarchBiotechnologyCa ...

General SKU021B076 MakeAeromatic TypeS-4 No.889095 LocationBarneveld Main Features MaterialStainless steel Volume210 Ltr. Motor10 KW Specified Features - Fluid bed dryer batch Fluidbeddryer(1x) Granulatorcheck With pancheck Capacity210,0 Ltr Pan sizesDia. 900x890mm Capacity20-150 KG With sprayercheck With pumpmake Watson Marlow Can be heated by steam65 KW With fanmake Meidinger, type HA-180/M3-710 Capacity0,6 M³/Sec Motor10,0 KW, 380/660 Volt (Ex) MaterialStainless steel 1.4401 (316) General With switchgear(as is) Total height+/- 10 Mtr Weight±2500 kg ATEX designedcheckPowdered foodsGeneric medicinesFluid bed dryers batchStarchBiotechnologyCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarDairySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicAeromaticIndustries > Food & Feed > Powdered foodsIndu ...

General SKU071Z285 MakeGlatt GmbH Binzen LocationBarneveld TypeGPCG-5 Spezial Specified Features - Fluid bed dryer batch Material finishPolished inside Main Features MaterialStainless steel Volume22 Ltr. Motor18.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryer:Glatt Particle Coater Granulator: (1x) With pan mounted on wheelscheck Capacity22 Ltr Pan sizesdia. 180x360mm With sprayercheck With electric heatingcapacity 57,8 KW + 18,0 KW frost protection With fantype RC 2R U140 MBGX GL360 Capacity0,56 M3/Sec Motor18,5 KW, 400 Volt (Ex) With dust filter/:Nachentstauber: make ANKE, type SY 20.2.1 MaterialStainless steel 1.4301 (304) General No.6216 Year of construction1996 With switchgear2x (Dim. 200x65x230 CM + 80x60x230 CM) Total height3,3 M ATEX designedcheck Extra Specifications- With hydraulic closingPowdered foodsGeneric medicinesFluid bed dryers ...

Case Erector BEDO VA988 + Year of construction 1997 Machine no. VA 988.1.52490, serial no. 4705 Output: 20 cart./min. with automatic format change. format range: L 200-650mm W 150-460mm H 100-500mm. Carton outlet height: 600 mm Electrical data: Voltage: 400V 3 phase Frequency: 50Hz Connected load: 7.3 kVA 18 amps Operating pressure: 5-7 bar The machine is equipped with a PLC control make Siemens S 5. Machine weight: 1,500 kg machine dimensions: Length: 3000mm Depth including cardboard magazine: 2100 mm Height : 2100mm Machine weight: 1,500 kg Bottom closure with NORDSON 3400 hot-melt device. If you need more information. We are here to help! Please contact us using the contact form or give us a call

General SKU413X1254 MakeVirba LocationBarneveld TypeVSK 14,7-10-10/7,5-II Main Features MaterialStainless steel Motor0.9 KW Surface2.06 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface2,06 m² Bed sizes2750 x 750 mm Product inletø 150 mm Product outlet2x ø 200 mm Number of sections:1 Air inletø 250 mm Air outletø 400 mm Vibro motor2x Motor2x 0,90 kW, 400 V, 965 rpm MaterialStainless steel 1.4301 (304) General No.33482 Year of construction1997 Mounted on mild steel framecheck Floorspace3,70x1,40 m Total height2,25 mPowdered foodsTea, herbs & coffeeStarchBiotechnologyAgrochemicalsSpicesFluid bed dryers continuousCatalysts & fillersFeed additivesCosmeticsAnimal feedSolid pharmaceuticsDyes & pigmentsNew arrivalsMinerals & inorganicVibraIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > Tea, herbs & coffe ...

Colchester triumph 2500 variable speed for sale. 50” long bed, gap bed, metric, quick change dickson toolpost, 3 jaw chuck, DRO, 6 position carriage stop, rear tool post cross slide. Direct from workshop clearance. Has been tested and seems to run fine in all gears and variable speeds, screw cutting, cross and longitudinal traverse. Moves smoothly along the bed and cross slide .

General SKU300U889 MakeGlatt GmbH TypeTFN30 No.4428 Year of construction1985 LocationBarneveld Main Features MaterialStainless steel Volume100 Ltr. Motor7.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan(3x) With pan mounted on wheelscheck Capacity100 Ltr. (30-60kg) Pan sizesDia. 500x300 mm Capacity100 Ltr. Can be heated by steam3bar, 50.000 Kcal/h Capacity1500m³/h Motor7,5kW, 380Volt, 2920rpm With dust filterinlet filter and outlet filter Filter surfaceinlet filter: unknown, outlet filter:4m² Mechanical cleaningcheck With timercheck MaterialStainless steel 1.4301 (304) With jacketcheck General With switchgear( as is) Floorspace3,2x2,3 m Total height3,1 m Weight1600 kgPowdered foodsGeneric medicinesFluid bed dryers batchFine chemicalsStarchOther chemicalCatalysts & fillersFeed additivesOther pharmaceuticsOther feedSolid pharmac ...

General SKU300U604 MakeBohle TypeBFS15 No.08110 Year of construction2008 LocationBarneveld Main Features MaterialStainless steel Volume30 Ltr. Motor15 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck With pan mounted on wheelscheck CapacityNetto 30Ltr. (bruto 45Ltr.) Pan sizesDia. 350x400 mm Capacityca. 62 kg/h Capacity750m³/h Motor15kW, 400/690Volt, 2940rpm (EX) With dust filtercheck Filter surface2,2m² Cleaning with air pulsecheck MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 (316L), Stainless steel 1.4435(316L), Stainless steel 1.4462 (Duplex2205), Stainless steel 1.4571 (316Ti) General With switchgearcheck Total height+/- 3,5m Weight+/- 3500kg CEcheck ATEX designedcheckPowdered foodsGeneric medicinesOintmentsFluid bed dryers batchFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersFeed a ...

General SKU300P640 LocationBarneveld MakeNiro (manufacturer plate is missing) TypeFlex-XE-060-2/1:0 Main Features MaterialStainless steel Motor0.55 KW Surface1.4 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1,4 m² Bed sizes1900x750mm Product inlet600x450mm Product outlet330x200mm Number of sections:3 Air inletdia. 310mm (3x) Air outletdia. 500mm Vibro motor3x Motor0,55 kW 230/400 Volt MaterialStainless steel 1.4306 (304L) General Year of constructionUnknown Floorspace2,8x1,6m Total height3,6m Weight2000 Kg Extra SpecificationsThis is a Conti Fluid Bed Dryer/Agglomerator (Granulator). The powder flows inside in a sort of zig-zag pattern, guided by internal baffle plates and supported by accordingly directed Conidur bottom sieve plates. Therefore the machine is much compacter and not as long and narrow as it would be w ...

control panel: Boschert Stanze Year: 1990 Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Bedrunka+Hirth TSM Terminal-Server, model 2019-01, is a sophisticated tool and storage management system engineered to enhance logistics and inventory control efficiency. Operating with a user-friendly touchscreen interface, it includes essential functions such as shutdown, reboot, and service mode for seamless industrial workflows. This system is fully operational, with both the screen and the integrated software performing flawlessly. Designed for integration into existing warehouse infrastructures, it streamlines management processes, ensuring optimal performance. Available now for immediate deployment, the TSM Terminal-Server is the ideal solution for businesses aiming to bolster their inventory and logistics operations.

General SKU214X079 MakeUnknown TypeUnknown No.Unknown Year of constructionUnknown LocationBarneveld Main Features Motor1.5 KW Width350 mm Specified Features - Mixing mill Motor1,5 kW, 380 volt, 1410 rpm Mill width350 mm Mill diametre110 mm With variator3-36 rpm With temperature control20-270°C Electrical heatingcheck With jacketcheck General With switchgearcheck Floorspace1,50x0,60 m Total height1,80 m Weight570 kg Extra SpecificationsTesting Roll mill, Roll diameter 110 mm, roll face width 350 mm, operating width 265 mm, nip width 0,1-5 mm&:nbsp:Mixing millsRubber-Plastic machinery > Mixing millsIndustries > Chemical > RubberBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

General SKU296U565 MakeWAB-Bachhofen LocationBarneveld TypeKD 45 Main Features MaterialStainless steel Volume45 Ltr. Motor33 KW Specified Features - Sand mill Horizontal sand millcheck Capacity45 Ltr. Housing dimensions Dia: 290x750 InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor33 kW, 380Volt,985rpm (EX) Rotor speed985rpm With ballscheck CapacityCap. range 180-1000 l/h With pumpPonndorf, PX15 Motorcheck Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) With jacketcheck General No.760735 Year of construction1976 With switchgear(as is) Floorspace1,4x1,0 m Total height1,8 m Weight1200 kg ATEX designedcheckPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicWab BachofenIndustries > Chemical > Paints & coatin ...

General SKU296U567 MakeDYNO-MILL WAB Bachofen LocationBarneveld TypeKD 60 Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor45 KW Specified Features - Sand mill Horizontal sand millcheck Capacity60 Ltr. Housing dimensions Dia: 290x960mm InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor45 kW, 350/660Volt, 1475rpm Rotor speed900rpm Without ballscheck Capacitycap. range 200-1300 l/h With pumpcheck Motor0,37kW,230/400Volt, 1375rpm MaterialMild steel, stainless steel 1.4000 (aisi 429) With jacketcheck General No.910820 Year of construction1991 Floorspace2,1x1,3 m Total height1,8 m Weight1500 kgPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicWab BachofenIndustries > Chemical > Paints & coatingsIndustries > Food & Feed >  ...

General SKU291Y514 MakeFryma TypeML180 Year of constructionunknown Main Features MaterialStainless steel Motor11 KW Inlet diameter30 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 180 x 28 mm Teethed rotorcheck With hoppercheck Inletø 30 mm Outlet200 x 60 mm Motor± 11 kW, (380 V) MaterialBrass, Stainless steel 1.4408 General LocationBarneveld Floorspace0,5 x 0,7 m Total height1,15 m Weight220 kg Extra SpecificationsThroughput range 1,000–12,000 L/hr.&:nbsp:Achievable particle size 0.5–5 mm.&:nbsp:Oils & fatPaints & coatingsGeneric medicinesOintmentsBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicFrymaIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > Generic ...

General SKU291Y527 LocationBarneveld MakeKarl Schnell Type062-F282-248 Motor Motor power21 kiloWatt Main Features MaterialAluminium/Stainless steel Motor21 KW Inlet diameter200 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 240 x 155 mm With hoppercheck Inletø 200 mm Outlet185 x 75 mm Motor21 kW (380 V, 2880 rpm) Speed2880 rpm Material1.0257 St 44.4, Stainless steel 1.4305 (303) General No.Unknown Year of constructionUnknown With switchgear(as is) Floorspace0,6 x 0,9 m Total height1,7 m Weight500 kgOils & fatPaints & coatingsGeneric medicinesOintmentsBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicKarl SchnellIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical >  ...

General SKU291Y475 MakeKarl Schnell Serial42942 Motor Motor power55 kiloWatt Main Features MaterialStainless steel Motor55 KW Inlet diameter165 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 220 x 50 mm With hoppercheck Inletø 165 mm Outletø 100 mm Motor55 kW (400 V 2880 rpm) Materialstainless steel 1.4006 (AISI 410) General Type080 F248 Mounted on framecheck LocationBarneveld Floorspace1,15 x 1,00 m Total height1,55 m Weight700 kg Extra SpecificationsWithout perforated disc.Oils & fatPaints & coatingsGeneric medicinesOintmentsBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicKarl SchnellIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > Generic medicinesIndustr ...

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Stock # U2267-2 Second hand stainless steel contact parts (316Ti) sand mill by Drais (Germany) model Perl-mill PMC 12.5 TEX. Machine has total volume of milling chamber 17.2 l and working volume about 12 l. Mill has rotor with plastic rings and works with rotation speed up to 1450 rpm. Machine is driven via belt gearbox by electric motor 13.5 kW, 1500 rpm, 400 V, 50 hz, Eex eIIT3 design. Mill is equipped with feeding pump, filter and electric cabinet. Includes technical documentation. Machine new 2002.

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN.,

GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...

Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.

1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, Strip knives fitted to front roll, Heavy duty fabricated bedplate, Carter stockblender mounted on top.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition.

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank : 50 litres Power : 45 kW Voltage : 380 V Weight : 1050kg

Milling machine 4-axis (15995740874) DMG Milltap 700 (2015) Spindle 24,000 1/min NC parts apparatus Lehmann EA-510. L Tool magazine 25 places Renishaw Measurement Kit Rinsing gun Milling machine 5-axis (15995747284) DMG Milltap 700 (2015) Spindle 24,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Rinsing gun Renishaw Measurement Kit Milling machine 5-axis (15995765944) DMG Milltap 700 (2018) Spindle 10,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Renishaw Measurement Kit Automatic front door Automation interface including automation door on the right Milling machine 5-axis (15995734744) + WH3 (770200062R) DMG Milltap 700 (2014) Spindle 10,000 1/min Swivel rotary  ...

Various millstones

Two Roll Mill 1m wide Hydraulic Nips With motor and gearbox AEG motor, 380volts, 107amps, 55kw, 1475rpm, 50 cycles Unidrive Gearbox manuf: Santasalo, Type 3KSV70, Year 1977, Weight 1500kg Lunn Safety gear fitted front and back of Mill Complete with control panel All mounted on a one piece bedplate Compact

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

KAAST Millex VPlus 7 CNC machining Centre way back in 2011 complete with Siemens Controller 802S

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use