be used for sale

1 BENZ laboratory jigger type LJ 250 TM, roller width 230 mm

Hydr. Flat, - Profile and bar steel shears with cut-out device and punch punch Offer number: 15229 Make: MUHR + BENDER Type: KBLH 700 Machine no: 01562869552445 Built: 1986 Technical data: - two separate working cylinders, - it can be used at two workstations - work at the same time - Flat steel shears - knife length 520 mm - for flat material 500 x 18 mm - Profile steel shears - L- steel at 90° 130 x 12 mm - at 45° 90 x 10 mm - T-steel at 90° 180 mm - Bar steel scissors - Round steel 65 mm - Square steel 60 mm - Cut-out device - rectangular tool for material up to 12 mm - Punching hole - Punching force approx. 700 KN - Stroke infinitely variable 0 - 75 mm - punches in steel up to 30 mm in 20 mm - Extension 510 mm - Hydraulic drive 400 V / 8.5 kW - Space requirement approx. W 1850 x H 2100 x D 750 mm - Weight ...

4-Roll Lab Calender Inverted "L" Description attached!

Becker rotary vane compressor/pressure pump complete with 18.5 KW AC-motor, 500 m3/h, 1.4 bar, completely overhauled with all wearing parts, 1 year warranty

Becker rotary vane vacuum pump VTLF 2.250/0-79 with 5.5 KW DS motor, 250 m3/h, final pressure: - 800 mbar, completely overhauled with all wearing parts, 1 year warranty

approx. 236 fields, frame height: 3m, shelves: 0,80m x 1m, – used - : Construction site price – primarily complete acceptance - : Price for complete acceptance: only 12.500.- € (net) = only 53.-€ / field, dismantled, packed and loaded! Price for partial quantities: Price per field ex location: only 75.- € (net), dismantled, packed and loaded! We reserve the right to take a minimum order! Manufacturer: unknown (probably Bito, Meta, Berger or similar) Type: unknown Year of construction: unknown Frame height: approx. 3m Shelves: 1m wide, 0.80m deep Payload per floor: unknown, but should be at least 150kg / floor 7 soils per field Available: from now on Condition: used (a bit dirty, see photos), not necessarily suitable for goods that are sensitive Location: Gau Bickelheim

Vacuum homogenizing system mobile table version Utility space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Content 5 litres gross Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW

Y.O.M.: 1989 Temperature Homogenizer speed-controlled Agitator right-left speed-controlled very good condition Dimensions LWH: 900 x 500 x 1450 mm Control cabinet: 800 x 300 x 1550 mm Weight: approx. 500 kg

Bertolaso Athena 75/15 Vacuum filler Bertolaso Year: 1991 with 75 filling valves and 15head aluinium screw capper Running direction: left to right

Manufacture | Manufacturer: Bekum Machine type | Machine type: BA15 Station | Stations: Single station | Single station Construction year | Year of construction: 2003 Location | Location: UES Clamping force | Clamping force: 170 kN Control system | Control type: Orig. Bekum Parison Control | WBK: 50 points | 50 points Extruder | Extruder: S 82/20D Parison Head | Hose head: Accu-head AKZ2.3 refurbished 2020 | Battery head AKZ2.3 overhauled in 2020 Mould Dimension | Shape dimensions mm (A length/B width/C depth): 525/400/2150 bottle volume | Bottle volume: 40 L Monitour language | Screen language: English | English Delivery time | Delivery time: Immediately | Right away

Butter Forming & Wrapping Machine Manufacturer: Trepko Type: XPG40 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k

Make Benhil Model: 8311 Junior Usage: Butter filling & wrapping Capacity: Up to 40 packages/min Product weight: 250 g Hopper with 2x screw augers Aluminium hopper and augers & Stainless Steel Hopper Condition : Good

Machine: Benhil Multipack 8304 mini portion Capacity: up to 110 packets/min Pack size: 7,5, 10, 12,5 gram Dimensions: 30 x 40 x height adjustable max 20 mm Product: Butter / Margarine Wrap material: Aluminium foil Dimensions: Approx. 200 x 150 x 200 mm (l x w x h) Weight: 1.400 kg (gross) Electricity: 1.1 kW

Ward Bekker Metal detector checkweigher Model: ACW25 Serial: 10012261 Stainless, Twin lane metal detector checkweigher, overall length 3400mm, belt width 75mm, max product height 100mm,

-for max. 80 litres -with automatic timer -Built in 2006 -Motor 3.0 kW -400 volts

Key data: 125 Cybelec, 2550 DNC 90 3D

Capacity: 125 t Folding length: 2550 mm CNC Brand: Cybelec CNC Model: DNC 90 3D Large tooling package Original paint 1e owner 2 hand opperator DNC 90 COLOR 3D Control Max. bending length:        2.550mm Distance between column:    2.050mm Max. pressing force:        125T Dis. Beam – Table:          480mm Beam stroke:                215mm Approch speed:              130mm/min. Working speed:              7mm/min. Return speed:               160mm/min. Adjustment X-Axis back gauge:1.000mm Number of controlled axis:  Y1 / Y2 / X  Control:                    Yes  Crowning:     ...

Key data: 300 , 300

Capacity round maximum diameter: 300 mm Angle degrees maximum: 300 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Cutting 90°:        300Ø Cutting flat 90°:   300 x 300 mm Feed single stroke: 10mm Feed multiple stroke:6.000mm Cutting speed Vario:0 - 115 m/min. Circle blade size:  4640 x 41 x 1,27 mm Power:              4,1 kW Chip conveyor:      yes  Length:             5.800 mm  Width:              3.000 mm  Height:             2.600 mm  Weight:             5.000 kg 

Compounding plant Material: PE, PP, PS, WPC + fillers / Details: segmented screws and cylinders, three-phase motor 250 kW, dcrunner, screw speed: 300 rpm, degassing, 2x busch vacuum pump, side feeding Berstorff ZSFE 120 SO, metal separator, noise protection hood, ECON air granulating system ELG 3000, control: SIEMENS S7 with visualization. Up for a surcharge: extension to 40D possible

Plate punch Beil 780 S-H-APL-CTP-p; pneumatically; Punching 780mm Autoplate; puncture 11mm; suitable for MAN 700; compressed air required. Plate punch Beil 780 S-H-APL-CTP-p MAN 700; pneumatic; punch size 780mm autoplate; depht 11mm; used for MAN 700; Need pneumatic air.

Mixing Boiler capacity total 26 l Useful capacity 15 l mobile table version Product area Material 1.4404 Heating room material 1.4541 Utility space: Operating temperature 99 °C Boiler room: Operating temperature 144 °C Pressure 4 bar Turbo dissolver agitator power 0.75 kW, rated speed 1,390 rpm, sliding ring seal little in operation

Vacuum homogenizing system mobile table version Utility space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Content 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Agitator with wall wiper 20-160 rpm Left-hand running/right-hand running and reciprocal left-right running Homogenizer 500-6,600 rpm

Baguette langroller Benier BE / Guette -Baguette long roller with long roll-out belt -Bandwidth: 72cm -Total length with band 445cm

Concier dough parting machine Type: B-84 A Dimensions: Length without strap: 116cm Length with band 236cm Width 80cm Height with funnel 162cm Height without funnel 111cm

Motor for trimmer BETTCHER type UN-84 Power: 440 Watt Power supply: 230 V without handle and circular blade We also offer: Blade - Knife 1000 - 183141 Blade - Knife 1400 - 183142 Blade - Knife 500 - 183142 Guide rail 1000 / 1400 - 183143 Toothed bushing 183154 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

• Corker BERTOLASO mod. VA for screw cap: • Producer: BERTOLASO • Speed (BPH): 8.000 bph • Direction: Clockwise • Screw aluminum cap • Cap: 31,5 x 18. • Capper 4 heads • Code X 73

• Filler BERTOLASO mod. AMBRA 30/40 – Low vacuum for still wine: • Year: 1990 • Producer: BERTOLASO • Speed (BPH): 6.000 bph • Direction: Clockwise • Used filler BERTOLASO 40 valves with low vacuum filling for still wine. • Mechanical bottle lifting pistons. • Bottling machine all in stainless steel. • Safety protections. • Control panel. • Code T 36

We offer replacement and wear parts for all common scrap baling presses of German manufacturers, such as Lindemann, Becker & Prünte, Becker, Oberländer, Leimbach.

• Corker BERTOLASO DELTA 809 R/S: • Year: 2012 • Producer: BERTOLASO • Speed (BPH): 15.000 bph • Direction: Clockwise • Used corker BERTOLASO composed of: • Model: DELTA 809 R/S. • 9 capping heads: o Natural straight cork. o Mushroom cork. • Safety protections. • Code X 242

• Corker BERTOLASO single head • Year: 1994 • Producer: BERTOLASO • Speed (BPH): 3.000 bph • Direction: Clockwise • Cap: - Natural straight cork - Mushroom cork. • Pre-evacuation before capping. • Safety protections. • Code X 105

• Corker BERTOLASO mod. SUPER GLORIA 110, single head – natural straight cork: • Year: 1992 • Producer: BERTOLASO • Speed (BPH): 2.500 bph • Direction: Counterclockwise • Complete with some cylindrical bottle formats. • Dimensions: 1100mm x 1000mm x H 2400. • Weight 500 kg • Code X 97

• Corker BERTOLASO mod. DELTA 406: • Year: 1993 • Producer: BERTOLASO • Speed (BPH): 9.000 bph • Direction: Clockwise • Natural straight cork. • Vacuum device before closing. • Variable height head • Stainless steel basement. • Safety protections. • Variable production speed. • Code X 82

• Corker BERTOLASO mod. DELTA 404 – 7.000 bph: • Year: 1986 • Producer: BERTOLASO • Speed (BPH): 7.000 bph • Direction: Clockwise • 4 capping Heads. • Suitable for naturla straight cork. • Safety protections. • Code X5

• Corker BERTOLASO 4T: • Year: 1982 • Producer: BERTOLASO • Speed (BPH): 7.000 bph • Direction: Clockwise • Used corker BERTOLASO composed of: • Model: DELTA 404. • 4 corking heads for flat cork. • Coclea for input bottle. • Many format available. • Safety protections. • Code X 1

Suction capacity: 1500m3/h Pressure Pa: 1200 Engine power: 1.1 kW Voltage: 400 V Weight: 150 kg Built: 2002 Rated current A 2.5 Frequency: 50 Hz Rust area: 750x500 mm Width: 760 mm Depth: 1050 mm Height: 890

New machine! Max. Speed: 120 (Max. BPM.) Need to match the thickness of the film. Applicable Lable Thickness: 0.05 - 0.07 (m/m) Applicable Lable Lay Flat Width: 40 - 150 (m/m) Applicable Lable Cut Length: 25 - 50 (m/m) Air Pressure: 5.5 (80 psi) Applicable Products Shape: Round, Square, Oval & Others Applicable Material: PVC, PET, OPS, PLA Machine Dimension LхWхH: 1130 x 1000 x 1620 mm Power: 1Ø 220V 50/60HZ - HMI control system help worker operate machine & change size easily. - Single cutting knife cut shrink band without dog ear. - Shrink band apply to cap by sucker; it is good to work with wide cap container. - Single phase power is required, easy & convenient. - Door Interlocks safety feature protecting worker from injury.

Cast iron beds Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Capacity round maximum diameter: 310 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id    5334 MAKE        Behringer    Germany TYPE          HBP 310 / 403 GA YOP            1995 SPECIFICATIONS Bandsaw / Circelblade / Automat        Automat Mitre cutting Angle L / R Degrees       L + R Cutting capacity 90 ˚ Ø   310 mm Cuttting capacity 90 ˚ Flatt      310 x 400 mm Cutting capacity 45˚ Ø       270 mm Cuttting capacity 45 ˚ Flatt       270 x 310 mm blade dimensions       5000 x 34 x 1,1 mm roller conveyor / push up / measuring Roller conveyor Cutting speed M/min ...

Capacity round maximum diameter: 320 mm Angle degrees maximum: 90 Capacity square: 320 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 320 mm MACH-id    5326 MAKE        BEKAMAK TYPE          BMSO 320 YOP            2008 SPECIFICATIONS Bandsaw / Circelblade / Automat        Bandsaw Automat Angle L / R Degrees        90 Gr. Cutting capacity 90 ˚ Ø       320 mm Cuttting capacity 90 ˚ Flatt      320 X 320 mm DIMENSIONS Length         2400 mm Width          2000 mm Height         1900 mm

• Year: 2000 • Producer: BERTOLASO • Speed (BPH): 6.000 bph • Direction: Clockwise • Vacuum before capping. • Cap presence check. • Natural straight cork. • 4 heads. • PLC SIEMENS S7. • Safety protections. • Code X 101

Capacity: 40 t Folding length: 1000 mm CNC Brand: Cybelec CNC Model: DNC 880 MACH-id    5203 MAKE         Beyeler Swiss TYPE           RTS 40 / 1000 YOP             1987 SPECIFICATIONS Max. bending length       1000 mm Distance between column       1000 mm Max. pressing force        40 T Dis. Beam - table        380 mm Troth beam          350 mm Approch speed         110 mm/min. Working speed          10 Return feed         120 mm/min. Adjustment       X-Axis bac gauge   500 mm Number of controlled axis         3 Control   ...

Pressure: 20 t Sheet length: 0 mm Sheet width: 0 mm Positions ATC: 20   CNC Brand: Siemens CNC Model: 810 MACH-id      5198 MAKE          Beyeler Raskin TYPE            RT 210 / 12 YOP              1995 SPECIFICATIONS Table load in kG        400 Kg Working area X Axis        1270 mm Working area Y Axis       1016 mm Working area X Axis with override        2540 mm Punching force        20   T Maximum sheet thickness        6 mm Turret position        20 / 5 BIG Auto indexing positions        5 Positioning speed X and Y Axis       85 mm/min. Change speed revolver  ...

Pressure: 20 t Sheet length: 0 mm Sheet width: 0 mm Positions ATC: 20   CNC Brand: Siemens CNC Model: 810 MACH-id     5197 MAKE          Beyeler Raskin TYPE            RT 210 / 12 YOP              1994 SPECIFICATIONS Table load in kG      500 Kg Working area X Axis       1270 mm Working area Y Axis        1016 mm Working area X Axis with override        2540 mm Punching force         20 T Maximum sheet thickness       6 mm Turret position      20 (2 BIG) Auto indexing positions      2 Positioning speed X and Y Axis       85 mm/min. Change speed revolver     40 Rpm Contro ...

J.A.Becker & Söhne SVB300/250 high-pressure compressor Built: 2005 Overpressure: 250 bar Volume flow: 300 liter/min ( 18m3/h) Engine power: 7.5kW Operating hours: cca. 2000 hour Pressure HP filter NEW Öel NEW Impeccable condition ! Only for industrial use ! No breathy !

CNC fine lathe Make: PetrolGer Type: TNL Control: Siemens 810T Built: 1991 Equipment and accessories: - Swivel loader system - Small conveyor belt - Charging-unloading gripper - Chip conveyors - Foot lever for clamping and relaxing the collet

Truck Mercedes Benz 814 D approx. 154,000 km with platform and Rungenstock with followers

Process containers new Manufacturer Becomix Type MV 250 Year built in 2015 never in use Content Usable volume 250 l Vacuum and pressure-resistant -1/+2 bar Operating temperature 20-134 °C Heating room Pressure-resistant 0-4 bar Operating temperature 20-152 °C

Machine type: Table milling machine Manufacturer: ELEKTRA BECKUM Model: TF 100 M 2.8 DN Built: 1998 Condition: ready for use Offer type: used machine Technical data: Table: 520 X 420 mm Speeds: 4000/6000/7500 rpm. Drive: 1.8 KW Comment: with an additional horizontal sawing unit (1.5 kW) for Two-sided machining with roller conveyor and lateral material guidance, everything can be easily dismantled Weight: 150 kg

1-channel rinser with 40 rinsing stations with safety housing running direction: right - left pitch: 127 mm

Used Stikken ovens PIETRO BERTO, Type: PBR H5/E-18 -In bakery condition - with gas burner - 3 ovens available - Sheets for baguette and 3-edge perforated sheets also available Visit and test run on request.

Semi-automatic flocking system Flockkabine MAAG flocking technology The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the parts were coated for the automotive industry.