be used for sale

Hydraulic filter, filter element -Manufacturer: Hydac Betafit OVP -Type: 1.11.16D03BN -Number: 2x filters available -Price per. piece -Dimension: O 80 x 425 mm -Weight: 1.3kg/pcs

Lightbus combined input/output module, input/output module, parallel input/output -Manufacturer: Beckhoff, Input/Output Module -Type: M-1410 001 -Input voltage: 24 V DC -Quantity: 1 available -Dimensions: 165/75/H70 mm -Weight: 0.7 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water reservoir -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm -Dimensions: 570/540/H370 mm -Weight: 24 kg

Beumer bar band 1360-680-430 + injection unit 30° 800-680-430 RA1262 Injection unit 30° consisting of a clock band and a triangular band. Scaffolding and cladding are made of profiled steel sheet. The drive is carried out by means of a gear edgear motor and belt drive. Without control and connections to upstream and downstream conveyors Technical data: Manufacturer: Beumer Year built: unknown Condition: good (used) Engine: fully functional Data Triangular Band Type: Injection unit 30° 800-680-430 Angle (injection): 30° Conveyor length (FL): 1360 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Wide transport belt: 393 mm Drive drum: dia. 74 mm Deflection roller: 63.5 mm Funding speed: 2.0 m/sec Engine power: 0.55 kW Data clock band: Type: Tape 1360-680-430 Function: Acceleration tape Conveyor length (FL): 800 mm Nominal/outer width (NB): 680 mm Usable width  ...

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Manufacturer: Still, charger Belatron type E 24/90 eco EU -Input voltage: 220 V 50 Hz -Power: 25.2 V/90 A -Dimensions: 550/410/H780 mm -Weight: 94 kg

Pneumatic grease gun, compressed air grease gun, grease pump -Grease gun: pneumatic, compressed air grease gun, mobile version -Container capacity: approx. 100 liters / Ø 462 x 625 mm -Overall dimensions: Ø 606 x H1020 mm -Weight: 63 kg

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Manufacturer: Bernstain, Foot switch type F1-U1 UN -Voltage: 10A 500V-AC IP65 -Connector: 6-pin -Metal housing: with protective cover -Overall dimensions: 280/150/H760 mm -Weight: 3.3 kg

Fiber optic cable, fiber optic line, data cable, LAN cable, fiber optic cable, coaxial cable, antenna cable -Manufacturer: Bedea, coaxial cable 93 Ohm -Type: M17/90-RG 71 -Length: 200m -Price/delivery: complete -Dimensions roll: Ø 400 x 240 mm -Weight: 14.1 kg

Transport trolleys, pipe frame trolleys, drum trolleys, drum tippers -Barrel trolley: Barrel tipper for 200 liter barrel -Barrel support: 2 metal rollers Ø60 x 400 mm -Wheel equipment: 2 castors, 2 wheels -Bracket: for drip tray -Dimension: 990/610/H680 mm -Weight: 20 kg

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Smugglers/smugglers conveyor technology Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 1790 mm Total width inside: approx. 2300 mm Conveying width incl. motor: approx. 800 mm Conveying width without motor: approx. 710 mm Roller spacing/ axle spacing: 120/65 mm Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (037 KW) Includes side guide Feet to be ordered separately. In stock: 1 Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made soluti ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor technology/ rollers Manufacturer: AMI Fördertechnik Year of construction: 2013 Condition: Used Drive type: Flat belt Total length: approx. 3800 mm Total width incl. motor: approx. 850 mm Total width without motor: approx. 690 mm Conveying width: approx. 600 mm Wheels/axle distance: approx. 65 mm Roll diameter: approx. 50 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 40 mm Including 2 SEW motors (0.37 KW) In stock: 2 pieces Price per meter The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics F ...

1 BENNINGER sectional warping machine type BEN-ERGOTRONIC, working width 200 cm, year 1995, machine supplied with 2 trolley creels type BEN-CREEL, each 640 spindles (8 stores x 40 columns x 2 sides), vertical gauge 240 mm, horizontal gauge 240 mm

1 BENNINGER sectional warping machine type SUPERTRONIC, working width 220 cm, year 1989, machine supplied with 2 trolley creels type BEN-CREEL from the year 1999, each 640 spindles (8 stores x 40 columns x 2 sides), vertical gauge 240 mm, horizontal gauge 240 mm

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller Conveyor / Conveyor Conveyor / Rollers with Drive incl. acceleration motor / roller Model: Flat Belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 1860 mm Total width incl. motor: approx. 830 mm Total width without motor: approx. 695 mm Conveying width: approx. 600 mm Wheels/ axle spacing: approx. 65 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Including 2 SEW motors (0.37 KW) Feet to be ordered separately Stock: 6 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high load ...

WITH COUNTING STATION M. No.: 3.65-00001 Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt

Vacuum homogenizer, process plant Becomix RW 125 CD Machine COMPLETE BECOMIX RW 125 CD HOMOGENIZER IN VERY GOOD CONDITION. Maschine comes from product development. Commissioning December 2007 composed of: 1. Vacuum homogenizer in pharmaceutical design, homogenizer water-cooled and with Becomix Powder Jet Manufacturer: Becomix Type RW 125 CD Year of construction 2006, very good condition, commissioning December 2007 Capacity usable volume 125 l Vacuum and flameproof -1/+2 bar Heating jacket 21 l Pressure-resistant 4 bar 3. Bcomix Promas CS Control 4. 1 piece of energy frame incl. valves, vacuum pume, 5. Control cabinet with frequency converters 6. Control cabinet with Siemens S-7 and control panel with Promas CS software 7. Complete documentation including FAT, IQ, OQ.

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m Overhauled and modernized machine -DRO in x and z-axis -New BEMA tailstock with 0,1mm cylinder compensation -Park position for the tailstock -New automatic switch off when diameter is reached -Automatic switching from rough to finish grinding -Finish grinding feed electrical infinitely variable from 0-100% -Modernized infeed handwheel like on the new machines -swiveling operator panel -Splash doors -coverd x-axis with possibility to set an exhauster on top -New internal grinding device like on the new model -new hydraulic aggregate -New electric cabinet -Scontrol voltage 24V instead of 220V Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrS ...

Single-station machine for items up to 10 ltr. Extruder 6+0/20D. Single head, capped separator. Waste die-cutter. At call

moulder for bread rolls

Power supply rails, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, potential feed terminal -Type: KL9100 -Number: 4 pieces available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

InterBus-S, bus coupler, Interbus, Profibus -Manufacturer: Beckhoff, Profibus bus coupler -Type: BK3120 -Quantity: 1 module available -Dimensions: 70/50/H100 mm -Weight: 0.2 kg.

Shrink tunnel from a German manufacturer: -Tunnel opening approx. 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m/min. -Choice of fixed or center-rotating tunnel bars. -The hot air flows can be adjusted separately at the top and centre via deflectors. -Ground air at the bottom can be switched on separately. -The machine can be pushed or fixed by means of lockable castors.

Key data: 2 mm

CPP 7 ply , Testline, can also be used for smaller special productions. Film width max = 650 mm, Output max. = 200 kg/h Nozzle width = 800mm 5 Extruders: 2x Ø 60mm, melt pumps available 70 kg/h each 3x Ø 38mm 19 kg/h each Output: 200 kg/h Weight range: 50-700 μm, Hopper and pneumatic conveying option! Cloeren Feedblock EDBBCAA EBBCDCA ACEDEBA Cooling roller unit with 3 rollers Rewinder diameter max = 300 mm

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100/21 Machine no.: 1286.1541.1324 Year of construction: 12/1986 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 780 kg Bale volume: 1m³ Machine weight: 730 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 09-BE001521-05 Year of construction: 10/2005 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 pmax: 100 bar Drive power: 2.2 kW, 85.1 A Dimensions: 1210 x 1605 x 2200 mm Weight : 860 kg Bale volume: 1m³

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 08-BE003665-07 Year of construction: 08/2007 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 860 kg Bale volume: 1m³

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WD5-008.151-00 -Quantity: 2x controllers available -Price per piece -Dimensions: 310/60/H180 mm -Weight: 2.5 kg/pc.

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-? Machine No.: unknown Year of manufacture: unknown System: Rotating Waste Compactor The packing station captures, tears and compacts the product to be filled by means of a specially equipped steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Bale volume: 1m³ Weight: approx. 750 kg

Hugo Beck SL 412/25 Shrink Tunnel Hugo Beck Shrink tunnel SL 412/25 380 V 6/9 KW power Air circulating blower Cooling fans 2 x control heater 1 x basic heating 1 x auxiliary heater with chain transport Metrics Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm More items - new and used - can be found in our shop! International shipping costs on request!

Qty. 1 Second-hand filling monoblock Mfc.: STORK Bepak B.V. Type: VS 60/110/12 LW – 0.25, 0.5, 0.7 L Built: 1992 Carousel type 60 Pourers Equipped with a capping machine - 12 heads Installed power: 13.5 kW Nominal capacity: up to 20,000 bottles/h Working capacity: 12,000 bottles/h for a 0.5 l bottle Two sets of heads for 28x18 and 28x38 caps Two slides Multi-row plate conveyors feeding into and out of the monoblock. Technical assessment: complete device, technically efficient

Qty. 1 Second-hand carton forming machine Mfc.: STORK Bepak B.V. Type: S.A.-25 – 0.25, 0.5, 07 L Built: 1998 Possibility to form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to C, a hot melt adhesive applicator (Nordson USA) (granules or flakes) applies heated hot melt adhesive under high pressure in the form of strips to the vertical folds of the bottom of the carton. Capacity: 25 cartons/min Installed power: 8 kW Technical assessment: complete device, technically efficient. Price: EUR 49,500.00 As is where is!

Spare parts package for Compressors and cold dryer from BOGE MATTEI and BEKO. Upon request single parts can be offered. Detailed photos can be provided. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Unfortunately the type is no longer readable -Container content: approx. 25 liters -Total dimensions: 420/360/H3500 mm -Weight: 13 kg

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Staples, staples, industrial staples -Manufacturer: BeA, Industrial staples, type 14/40 NK HZ, carton of 10,000 pieces -Length: 40 mm / 1 5/8 -Back width: 10.5 mm -Material: Galvanized steel -Color: yellow resinous -Transport dimensions: 210/180/H130 mm -Weight: 10.4 kg

drawer rail, telescopic rail, drawer pull-out, drawer runners, Telescopic rails, pull-out rails, side rails, front pull-out, stainless steel bar handle -Bar handle:Stainless steel Ø10 mm -Length 700 mm / hole spacing 690 mm -Quantity: 1x handle available -Dimension: 700/41/H10 mm -Weight: 0.5 kg

Key data: 75 , 10 , 691

Parameters: -Max. pressure 10 bar - capacity 691.2 m3/h - power 75 kW - Built-in dehumidifier - PREVENTIVE MAINTNANCE support in 2019.

drawer rail, telescopic rail, drawer pull-out, drawer runners, Telescopic rails, pull-out rails, side rails, front pull-out, stainless steel bar handle -Bar handle:Stainless steel Ø10 mm -Length 695 mm / hole spacing 685 mm -Quantity: 1x handle available -Dimension: 695/37/H10 mm -Weight: 0.5 kg

drawer rail, telescopic rail, drawer pull-out, drawer runners, Telescopic rails, pull-out rails, side rails, front pull-out, stainless steel bar handle -Bar handle:Stainless steel Ø10 mm -Length 630 mm / hole spacing 620 mm -Quantity: 1x handle available -Dimension: 630/40/H10 mm -Weight: 0.4 kg

Bendi forklift in lovely condition. Manufacturer rebuild in 2015. New charger 2015. 5.5m lift. Available immediately, viewing possible in Milton Keynes, UK.

Belshaw Mark VI Automatic donut fryer Serial: 22682 2018, 4 wide automatic fryer for donuts, 1000+ donuts per hour, adjustable speed, timer and temp controls, with infeed conveyor, 1Ph

Steel staircase, exterior staircase, extension staircase -Steel staircase: Add-on staircase with treads and railings on both sides -Width: 880 mm -Step spacing: approx. 200 mm -Dimension of top step: 1940 mm -Transport dimensions: 3880/880/H970 mm -Weight: 150 kg

Window rubber, cutting machine, seal cutter, pneumatic slat cutter, cutting device, pneumatic cutting device, pneumatic press -Manufacturer: Benzing, pneumatic cutting device -Stroke: adjustable, max. 70 mm -Individual components: see photos -Dimensions: 150/130/H450 mm -Weight: 9.3 kg

4. Qty. 1 Second-hand Monoblok Mfc.: Stork Bepak BV Type: VS 60/110/12LV Built: 1992 Carousel monoblock 60 pourers 12 closing heads Fill inspector Missing cap Capacity: 20 000 bottles/h Sizes: 250, 500, 700, 750 ml

USB charging socket, USB charging socket -Manufacturer: Berker, USB charging socket 230 V, 2-way, 3A Ovp -Type: 926102505 ZR3722 -Number: 25 x socket available -Price per piece -Packaging dimensions: 80/80/H60 mm -Weight: 0.2 kg/piece

Variator pulley, Vario adjustment pulley, Vario pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Berges, Vario pulley -Type: 280 -Outer pulley diameter: 295 mm -Hole: Ø38 x 160 mm -Dimensions: Ø295 x 170 mm -Weight: 7.8 kg

Ventilation valve, relief valve -Manufacturer: BEV, ventilation valve for water -Type: M16072 PN16 DN 050 -Bolt circle: Ø 125 x 17 mm -Dimensions: 165/162/H295mm -Weight: 13 kg

Key data: 150 t, 2550 mm

Stock number: 3866 CNC PRESS BRAKE Manufacturer: BEYELER, Type: PR 8 150D x 3100 mm Machine NO.: 96/445/002, Year of manufacture: 1996 Specifications: Gr. bending length 3100 mm Gr. pressure capacity 150 tons Stroke length 215 mm Column passage 2550 mm Projection 305 mm Total power 7.5 kW CNC control Cybelec DNC 908 PS Presscad Fabr. Controlled in 4 axis Y1-Y2-x1-x2 axes Length: 1900 mm, Height: 2600 mm, Width: 3500 mm, Weight: 9500 kg