be used for sale

Manufacturer: Heesemann , Type: LSM 8, Year: ca. 1998, Monting of the machine: Quer/lang/Scotch/Bürste/Entstaubung, Sanding hight mm: 3-80, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350/5400 x 1400, Band 1Schleifbandgeschwindigkeit m/sec: 0,3-12, Band 2 Schleifbandgeschwindigkeit m/sec: 0,3-12, Table hight adjustment by engine: yes, Cross sanding unit: 1, Shoe unit: 1, Elektronische Tastung mm: 16, Frequency control of belts: 2, Power belt 1 in kW: 11, Performance in kW belt 2: 11, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 1,6-9, Feeding engine kw: 1,5, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Maschine vorführbereit: yes, Voführung möglich: yes, FREE TEXT: 1 zusätzliche Scotch Bürste 4 Kw, Year :1998

Manufacturer: Ernst Funierschleifautomat, Type: 840-2, Year: 2003, Monting of the machine: Quer/lang/lang/lang/Bürste, Sanding width mm: 1305, Sanding hight mm: 3-120, Number of sanding belts: 4, Sanding belt dimensions: 2620 X 1350/5400 X 150, Table hight adjustment by engine: yes, Rollers: no, Band 1Querschleifaggregat: yes, Band 1 Leistung kW : 18,5, Band 2 Schuhaggregat: Simplex Schuh, Band 2 Kombiaggregat Walze/Schuh: no, Band 2 Leistung kW : 30, Band 3 Kombiaggregat Walze/Schuh: Simplex Schuh, Band 3 Leistung kW : 30, Band 4 Kombiaggregat Walze/Schuh: Duplex Schuh, Band 4 Leistung kW : 37, Elektronische Tastung mm: yes, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 13,5-60, Feeding engine kw: ca.4, Constant table hight: 880, Vacuum table: yes, Segment sanding shoe: yes, wast cleaning: yes, Ionising: yes, Weight in kg: 10200, Year :2003

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor -Strap width: 2x 30 mm -Width: adjustable -Conveyor belt length: 1950 mm -with frequency converter in the geared motor -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Height: adjustable -Quantity: 1 piece available -Dimensions: 1950/930/H960 mm -Weight: approx. 100 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor -with pneumatically driven centering unit -with lifting unit -Belt width: 2x 30 mm -Width: adjustable -Conveyor belt length: 2450 mm -with frequency converter in the geared motor -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Height: adjustable -Number: 2 conveyor belts available -Price: per piece -Dimensions: 2450/1380/H1000 mm -Weight: approx. 300 kg

Key data: 1100 mm, 3 , 150 mm

Wide belt sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, year 1991 TECHNICAL DATA: Working width max. 1,100 mm Working height max. 150 mm Abrasive belt width 1,110 mm Sanding belt length 1,900 mm 1. Grinding unit Profiled steel contact roller D=200 mm Motor power 15 KW 2. Grinding unit Combined contact rolling - grinding shoe unit Profiled rubberized contact roller, D=150 mm Air cushion sanding shoe Motor power 11 kW 3. Grinding unit Grinding shoe unit, electronically controlled link pressure beam Element width 30 mm Synchronization / counter-rotation Infinitely variable sanding belt speed (frequency converter) Digital display of the sanding belt speed Motor power 11 kW - Transport carpet with stepless belt feed 3 - 15 m/min. - Vacuum table / vacuum clamping device 11 kW - Rotating cleaning brush 0.75 kW - Digital display of the grinding height - ...

Manufacturer: Torusmill Model: TM-100 Year: 2004 The cooling circuit is not included Technical Specifications - Tank Volume: 100 L - Grinding Material Capacity: 40 - 70 L - Grinding Basket Volume: 4.3 L - Bead Fill Level 50%: 2.135 L - Main Motor Power: 15.0 kW - Motor Speed: 0 - 3,000 rpm - Shaft Speed: 100 - 2,000 rpm - Power Supply: 3 x 400 V / 50-60 Hz - Fusing: 3 x 50 A, 2 x 2 A - Total Weight: approx. 1,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

with cross-table Max drill capacity: dia 40 mm Table dimensions: 900 x 260 mm SPEEDS: 65 > 2400 rpm

Manufacturer: Fasti Model: 902-315/40 Year of Manufacture: 1990.The machine was last retrofitted in 2019. Type of Machine : Bending Machine Technical Specifications - Total Weight : 25,000 kg - Nominal Pressing Force : 3150 kN - Stroke Length: 250 mm - Working Width: 4050 mm - Maximum Working Pressure: 30 MPa - Stopping Time: 71 ms - Two-Hand Release Safety Distance : 114 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 300 t

For sale is a hydraulic gantry straightening press (H-frame) from the manufacturer Durendus with a maximum pressing force of 300 T. The machine has a table size of 1,500 × 2,000 mm, a maximum installation height of 1,000 mm and a stroke of up to 600 mm, making it particularly suitable for straightening, tuning and heavy forming work in industrial use. Technical data + information: Hydraulic gantry straightener – H-frame – 300 t 1,500 × 2,000 mm General information - Name: Hydraulic portal straightening press - Type: H-frame / portal press - Manufacturer: DURENDUS - Press force: 300 T (adjustable) - Distance between the stands: 1,580 mm - Table size: 1,500 × 2,000 mm - Bridge travel: 1,500 mm - Lateral travel (center): ±500 mm - Max. installation height: 1,000 mm - Table height from the ground: 950 mm - Plunger extension: 200–400 mm - Total weight: approx.  ...

Key data: 200 t

DURENDUS DPS-200 – Hydraulic gantry straightening press – 200 t – 1,500 × 2,000 mm The machine shown here has already been built and delivered on behalf of a customer. We can remanufacture this machine for you at very short notice. It is a hydraulic gantry straightening press from the manufacturer DURENDUS with a maximum pressing force of 200 t. The machine has a table size of 1,500 × 2,000 mm, a maximum installation height of 800 mm and a stroke of 400 mm, making it ideal for straightening work, press-fit processes as well as applications in steel construction and toolmaking. Technical data + information: Hydraulic gantry straightening press – 200 t – 1,500 × 2,000 mm General information Manufacturer: DURENDUS Model No.: DPS-200 Type: Gantry press / H-frame Press force: 200 t (adjustable) Total weight: approx. 8,500 kg Dimensions (W × D × H): approx.  ...

2x2x2m 650 C and 1200 C PLC

The Brewiks 500 is a two-vessel microbrewery system operating on a plug-and-brew principle. It consists of a mash tun and a lauter tun, both on wheels, which together function as mash tun, filter tun, boiler, and whirlpool. Average output is up to 580 litres of high gravity wort per 6-hour brew cycle. Construction and Certification - The system is manufactured from quality stainless steel AISI 304/316 and carries a CE certificate. - Both vessels are stone wool insulated and mounted on stands with wheels for easy repositioning. Mash Tun - Included Equipment - 7-inch touchscreen controller - Electrical installation with 40 kW electrical heaters - Hygienic pump - Water heating system - Heat exchanger for heating sparging water - Pipe heat exchanger with hot water recuperation - Stone wool insulation - Valves and fittings - Stand on wheels - Condensing lid with silicon seal and drain tu ...

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 1350 mm, 1

- Working width 1350 mm - Rubberized pressure rollers - Roller table at the inlet and outlet - Belt feed speed 2.5-13 m/min, infinitely adjustable, perforated belt (prepared for vacuum tensioning device by external, not included drive motor) - Combi-contact roller-grinding unit (15 kW), with electr link pressure bar (element width 25 mm), belt speed infinitely variable from 2.5 to 20 m/s, belt length/width 2150/1370 mm, belt blow-off device, sanding shoe rest in the machine, pneum. Abrasive belt tensioning device - 1 rotating workpiece cleaning brush (0.75 kW) on the outlet side of the machine - Paintwork: RAL 5018 - Total connected load approx. 22 kW (36 A) - Operating voltage: 400 V, 50 Hz Technical data subject to actual equipment The sale is carried out on behalf of the owner from the current location, in the condition as existing, excl. Warranty.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers, curved roller conveyor -Conveyor belt rollers: Transport rollers, carrying rollers, curved roller conveyor, diameter 50/86 mm -Transport width: 575 mm -Wave: Dimensions see photos -Material: Plastic, galvanized steel -Quantity: 41x transport rollers available -Price: per piece -Overall dimensions: Ø 86 x 620 mm -Weight: 1.8 kg/piece

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

TECHNICAL DATA: Table dimensions: 1100 x 760 mm Tilting table Diameter of the flywheels: Ø 800 mm Saw blade length: max. 5650 mm / min. 5550 mm Installed power: 5.5 hp

TECHNICAL DATA: Working area: 1200 x 800 mm 3 flywheels: Ø 600 mm Saw blade length: max. 6970 mm Installed power: 3 kW Cutting height: 630 mm

max. wheel diameter: 406,4 mm gear width: 66 mm max. module: min. module: module: Control: FANUC Series 150M total power requirement: 61,6 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 5,5x4,6 m The GLEASON Phoenix 400HG is a high-precision CNC bevel gear grinding machine designed for the grinding of spiral, hypoid, and Zerol bevel gears in various operations. The machine is based on a 6-axis design with an additional dressing axis (D-axis) and enables fully interpolated movements between the tool and the workpiece. This allows for both generating and formate processes. The CNC control system synchronizes all movements, resulting in very high profile accuracy, repeatability, and flexibility. • GLEASON PHOENIX 400HG CNC machine with FANUC 150M control system • Gleason HMI – user interface for easy entry of gear parameters and correction values • Automatic dr ...

x-travel: 4.000 mm y-travel: 1.200 mm z-travel: 2.000 mm Control: HEIDENHAIN iTNC 530 HSCI total power requirement: 40 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 10,2 x 5,3 m High-performance CNC bed milling machine MTE BF 4200 equipped with HEIDENHAIN iTNC 530 control, ideal for precise machining of large and heavy workpieces up to 13,000 kg. The machine offers generous travels (X: 4,000 mm, Y: 1,200 mm, Z: 2,000 mm), a universal swivel milling head, and a 60-position tool changer. Fully refurbished, the machine is in very good technical and visual condition and ready for immediate operation. • Machine bed, column, and vertical saddle: cast construction, stress-relieved • Milling slide: cast construction • Universal milling head, positioned via Hirth splines, front plane 2.5°, rear plane 2.5° • Oil cooling unit for cooling the main gearbox • Spindle dr ...

TECHNICAL DATA: Sanding belt length: 2800 mm Installed power: 2 hp

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibeltl, timing belt pulley Ø 228 mm -Type: TB 28-8M-30 -Material: Steel -Number of teeth: 28 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 1210-32 Ø 32 x 25 mm -Quantity: 8x timing belt pulleys available - Price: per piece -Dimensions: Ø 75 x 38 mm -Weight: 0.6 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibeltl, timing belt pulley Ø 228 mm -Type: TB 56 8M 30 -Material: Steel -Number of teeth: 56 teeth / Belt width: 30 mm -Receiver: Taper clamping bushing: TECNAMIC 2012-40 Ø 40 x 35 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 150 x 38 mm -Weight: 3.6 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibelt, timing belt pulley Ø 228 mm -Type: TB 90 8M 30 -Material: Cast iron -Number of teeth: 90 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 2517-40 Ø 40 x 45 mm -Quantity: 6x timing belt pulleys available -Price: per piece -Dimensions: Ø 228 x 45 mm -Weight: 7.0 kg/pc.

: 1200 mm : 580 mm : 600 mm : 1575x425 mm : SK 40 : 152 mm : 110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WTW inoLab Oxi 7310 Benchtop Oximeter With CELLOX 325 oxygen sensor OD Accuracy: ±0.5% OD Concentration: 0.00 - 20.00 / 0 - 90 mg/L Dissolved oxygen - saturation: 0.0 - 200.0 / 0 - 600% (±0.5%) Dissolved Oxygen - Barometric Pressure Range: 0 - 200.0 hPa / 0 - 1250 hPa Temperature range: 0.0...+50.0 °C Temperature accuracy: ±0.1°C Power supply: Universal power supply, 4×1.5 V AA batteries or 4×1.2 V NiMH rechargeable battery Data Acquisition - Capacity: 500 in manual mode/5000 in automatic mode In good condition

Transnorm belt conveyor GF 3250-700-600 RA2470 Technical data: Conveyor length (NL): 3250 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0.5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 1994 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3250 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 scope of delivery: without support ...

Benchtop centrifuge ROTOFIX 32 Hettich laboratory In excellent working condition Reference : 1205 Technical specifications: Voltage: 208 - 240 V 1 ~ Frequency: 50 - 60 Hz Power: 160 W Maximum capacity: With swivel rotor: 4 x 100 g Max. Speed: 6,000 min-1 Dimensions (H x W x D): 257 x 366 x 430 mm Weight: approx. 23 kg With oscillating free rotor 1624 With 2 HETTICH 1369 pods for 4 tubes of 6/7ml Ø12 x 82/100 mm With 2 HETTICH 1346 pods for 2 x 20ml tubes Max. Speed: 4000 rpm Year of Manufacture: 2000

pressure: 135 t chamfer lenght: 2550 mm distance between columns: 2050 mm control: CYBELEC ModEva 10 S total power requirement: 25 kW weight of the machine ca.: 11.000 kg dimensions of the machine ca.: m Machine: - Sturdy machine frame constructed as a fully welded all-steel structure - Pressure beam with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system Optional equipment: - Increase in installation height and stroke by 150 mm each - Backgauge system 2 - 2 axes, R-axis adjustment 150 mm - 2 x additional stop fingers 2/4-axes, however, offset by 20 mm - CNC holding device - Distance from the bending line to the holding device approx. 240 mm - EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering - EHT lower tool clamping, mounting width 55 mm, pneumatic - Hardened insert strip for E ...

Press brake Amada Astro HDS 1030 / NTR BJ 2010

This IMA AM33 - 3000 /1300 Systems unloading and stacking station was manufactured in 2005. It is a robust and reliable choice for your automation needs. Contact us for more information.

This 3-axis TIGER TFA6 Bed Type Milling Machine was manufactured in 1998. It features a longitudinal travel of 2000 mm, transversal travel of 1000 mm, and vertical travel of 1000 mm. The machine is equipped with a Heidenhain TNC 426 CNC, a manual bi-rotary head, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the TIGER TFA6 machine we have for sale. Contact us for further details.

This 3-axis DEBER BTM 5A was manufactured in 2000. It features a continuous rotary table with a size of 1,500 x 1,000 mm and a maximum spindle speed of 3,000 rpm. The machine is equipped with a twin-spindle head and an automatic tool changer, enhancing its operational efficiency. If you are looking to get high-quality honing capabilities, consider the DEBER BTM 5A horizontal honing machine we have for sale. Contact us for further details.

This 3-axis Soraluce TA-20 bed type milling machine was manufactured in 2005. It features a substantial table size of 2,000 x 800 mm with a maximum table load of 4,000 kg. The machine offers impressive X-axis travel of 2,000 mm and rapid traverse speeds of 25,000 mm/min. If you are looking to get high-quality milling capabilities, consider the Soraluce TA-20 machine we have for sale. Contact us for further details.

This 3-axis Soraluce TA-A20 bed type milling machine was manufactured in 2005. It features a longitudinal traverse of 2,000 mm, a cross traverse of 1,000 mm, and a vertical traverse of 800 mm. The machine is equipped with an automatic indexing head and a spindle speed range of 20 to 4,000 rpm. If you are looking to get high-quality milling capabilities, consider the Soraluce TA-A20 machine we have for sale. Contact us for further details.

This 3-axis ALESA MONTI MAF45 was manufactured in 1992. It features an impressive X-axis travel of 1,900 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 700 mm. The machine is equipped with a universal head and has a maximum spindle speed of 2,000 rpm. If you are looking to get high-quality machining capabilities, consider the ALESA MONTI MAF45 horizontal machining centre we have for sale. Contact us for further details.

Transnorm conveyor belt GF 1500-600-500 RA2070 Technical data: Conveyor length (NL): 1500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 1500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit  ...

Transnorm conveyor belt GF 15000-600-500 RA2067 Technical data: Conveyor length (NL): 15000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 15000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...

Transnorm conveyor belt GF 1250-600-500 RA2096 Technical data: Conveyor length (NL): 1250mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 1250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...

Ref. №: 4104 Automatic belt skinning machine Cutting width: 370 mm Width: 800 mm Depth with conveyor belts: 1850 mm Height: 1200 mm Electrical connection: 0,75 kW, 400V/50Hz/3ACV

Key data: 200 t

Horizontal Hydr. Straightening and bending press, 200 tons, hand and foot control, hydraulics. 18kw, with bending tools.

sheet width: 2040 mm plate thickness: 4,0 mm distance between columns: 2100 mm roll diameter: 150 mm total power requirement: 7,0 KW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 420 mm throat: 420 mm workpiece height: 300 mm table-size: 610 x 610 mm saw band length: 3150 - 3260 mm turning speeds: 12 - 750 m/min total power requirement: kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,2 x 0,8 x 2,0 m Band saw with - Ideal welding machine - Grinding machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 mm, 500 mm, 500 mm

Manual bending bench, 2 m long, with extendable base frame for installation in transporter

Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible.

Key data: 1350 mm, 3 st.

CALIBRATING SANDING machine with 3 belts model DMC TECHNOSAND 1350 RRP second-hand machine working conditions excellent machine with vacuum unit for table machine with CE regulation: YES instruction booklet : YES universal machine for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data: max. working width mm.1350 max. working height mm.150 min. working height mm.3 dimensions of abrasive belts mm.1380 x 2620 automatic centering composition machine ( 3 units , 3 independent motors ) : 1st unit : rubber roller diameter mm.170 - shore 45 . motor power Hp 15 automatic blowers for cleaning abrasive belts 2nd unit : rubber roller diameter mm.170 - shore 45 . motor power Hp 15 automatic blowers for cleaning abrasive belts 3rd unit : electronic segmented pad n.34 sectors . motor power Hp b ...

Key data: 1100 mm, 2 st.

CALIBRATING SANDING machine model SANDINGMASTER SCSB 2-1100 second hand machine max. working width mm.1100 composed by n.2 belts ( 2 separate motors ): 1° belt . calibrating roller in rubber diam.mm.260 . motor power Hp 20 2° belt . pneumatic pad . motor power Hp 15 belt dimension mm. 1900 x 1130 volt. 380/50 weigth kgs. 2000

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.