129,247 used machines on RESALE, but how to find them? Machine Search
The machine has been dismantled and has been in our warehouse since 2015, it is used and was in use in a turkey slaughterhouse with underbeam, conveyor belt and articulated rupee.
NANO FILTRATION PLANTS CAPACITY: FROM 5.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND PRE CONCENTRATION TO 20 % SOLID RATIO FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN
REVERS OSMOSIS APPLICATIONS: MILK CONCENTRATION, WHEY CONCENTRATION, WASTE WATER CONCENTRATION STRAINED YOGURT, QUARK, CAPACITIY: FROM 5.000 LT TO 50.000 LT PER HOUR FULLY AUTOMATION CONTROLLED WITH PLC AND TOUCH SCREE PANEL TURN KEY PROJECTS
BAYKAL HNC 4110 hydraulic guillotine shears built in 2019 in Turkey are designed for precision cutting of workpieces with a maximum thickness of 10 mm. The machining process is performed by extremely precise cutting knives with adjustable gap between blades. The all-steel construction combined with a powerful hydraulic system additionally ensure the highest stability and machining performance. The BAYKAL HNC 4110 guillotine shears have been in use for a small amount of time – so far they have worked only 560 hours. The total weight of the machine is 15400 kg. Technical specifications of the BAYKAL HNC 4110 guillotine shears - HMI panel: SIEMENS SIMATIC HMI - maximum sheet metal length: 4060 mm - maximum sheet metal thickness (Rm
ULTRAFILTRATION PLANT CAPACITY: FROM 5.000 LITER TO 30.000 LITER PER HOUR USED FOR PROTEIN CONCENTRATION APPLICATIONS: UF CHEESE, FETA CHEESE, MILK PROTEIN CONCENTRATE, WHEY PROTEIN CONCENTRATE FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN
BAYKAL APHS 31440 CNC hydraulic press brake was built in 2020 in Turkey by BAYKAL MAKINA SANAYI VE TICARET A.Ş. The machine, designed for machining sheet metal with a maximum length of 3100 mm, is distinguished by its high precision, efficiency and reliability. Throughout its entire service life, the machine was used for only 43 hours. Thanks to full electronic synchronisation with proportional valve technology, the installed CNC control constantly monitors and corrects the parallelism of the beam. The use of this solution maximises the accuracy and repeatability of the bending workpieces. The workspace, in turn, is protected by the FIESSLER AKAS laser safety system, which automatically stops the machine if the laser beam is interrupted. All this is complemented by a design made from high-grade ST44-2 steel, which maintains maximum stability during even the most intensive challenges. ...
BAYKAL RGS 3150x3 electromechanical guillotine shears were built in 2007 in Turkey by BAYKAL MAKINA SANAYI VE TICARET A.Ş. The machine, distinguished by its high precision, is used for cutting of sheet metal with a maximum thickness of 3 mm. The machining process is performed by means of quality cutting knives with an adjustable gap between blades. The all-steel design, combined with a powerful electromechanical system, guarantees the highest cutting performance during even the most intensive challenges. The workspace is additionally protected by high-end light curtains made by FIESSLER ELEKTRONIK. All this makes the offered BAYKAL RGS guillotine shears an excellent choice for any industrial plant. Technical specifications of the BAYKAL RGS 3150x3 guillotine shears - maximum sheet metal thickness (Rm
grinding wheel diameter: 200 mm no. of working stations: 2 Stück turning speeds: 2800 U/min dimensions of grinding wheel: mm grinding motor: 0,55 kW shaft cross cut: 32x40 mm total power requirement: kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 1 x 0,6 x 1,2 m - Swing table 420 x 220mm - on the side. Movement 40mm - infeed against grinding wheel 70mm - Degree of inclination 30 ° - Grinding guide grinding device - Inclination of the mounting bracket 20 ° - Adjustment of the mounting bracket 45 ° - Infeed against grinding wheel 80mm - Height adjustment 90mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rösen & Robbert Bread Slicer Type: Spa Bayern analog control Cutting width adjustable from: 3 – 15mm for cutting round and elongated breads with lubrication system can be driven on castors External dimensions width 104cm depth: 75cm height:107cm
The machine is in good technical condition, after prior agreement it is possible to test it. - Nominal forming force: 120 t Working length: 3106 mm CNC control Delem (graphic 2D programming) Automatic calculation of bending sequence and collision detection Back gauge X axis with 2× manually adjustable stop fingers CNC electromotive height adjustment of the back gauge (R axis) CNC electrically controlled table deflection Upper tool adapter ROLLERI Equipment and accessories: - Front protective device (tilting door) - Rear protective device (sliding door) - 1× freely movable two-hand / foot control - Operating instructions including CE declaration
Gebr. Bayer GB-2680N - Industrial bench grinder with drill grinding device - Drill grinding device - Diamond puller - Cooling water pump - Machine light Specification - Grinding wheel Ø: 210 / 280 mm - Grinding wheel width: 40 mm - Speed: 1450 rpm - Motor power: 1.5 kW - Dimensions WxHxD: approx. 1450 x 1600 x 1300 mm - Weight: approx. 300 kg
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Bayerwald, metal band saw M42 unused -Type: M42 2480x27x0.9 8/12 -Quantity: 1x metal saw band available -Transport dimensions: Ø 280 / 55 mm -Weight: 0.5 kg/piece
grinding wheel size: - mm amount: 2 STK Year: unbekannt 0 Grinding discs- 2 pieces Type Spec. 9A 541 JB U76 Max. RPM 2.360 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Offer 24295 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - Projection 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Motor back gauge with positioning control 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 rpm - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space required including back gauge, without front support arms -ca. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - E-foot switch - Cutting Line Illumination - - Cutting Length Selection - Rear area protection with light barrier
Offer 22408 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 10 mm - Projection 270 mm -Cutting angle° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Mechanical backgauge 20 - 650 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 12 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 820 mm - Space requirements incl. back gauge, without front support arms -ca. W 3850 x H 2000 x D 2000 mm - Weight approx. 8500 kg - With: - E-foot switch - Cutting line illumination
Buchdruck Schrank - Letters Cabinet Bayer For Leter Press Heidelberg OHT - Cylinder Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
An assembly line (workpiece carrier assembly system) item Bayern GmbH for loading, assembly, and (return) transport of workpiece carriers with two Deprag screwdrivers is available. Assembly principle: Karakuri (non-driven material flow principle), max. load: 30kg, max. stroke: 2630mm, max. speed: 1.63m/s. Assembly station dimensions X/Y/Z: approx. 12850mm/3350mm/2950mm, weight: approx. 1600kg, lift system dimensions X/Y/Z: approx. 9700mm/3350mm/1600mm, weight: approx. 400kg, control: item C3-05. The system is modularly adjustable at any time and complies with standardized industrial standards. Documentation available. An on-site inspection is possible. The system is dismantled.
sheet width: 3060 mm plate thickness: 6 mm no. of strokes: 20 Hub/min stroke: 750 mm Motor Capacity: 11 kW oil volume: 160 l weight of the machine ca.: 5.500 kg dimensions: 3860 x 2560 x 1560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Baykal Model: HGL 2606 Cutting length: 2560 mm Hydraulic universal swing beam shear Suitable for all types of sheet metal processing Max sheet thickness: 8 mm Compact design Finger guard for enhanced safety CNC Control: CYBTOUCH 8W Manual blade gap adjustment with quick setting on the right side Sheet insertion via roller ball table 90° feeding ensured via left-side guide The Baykal HGL 2606 is a hydraulic swing beam shear designed for precise, efficient, and economical cutting of sheet metal up to 8 mm thick. The machine features hydraulic hold-downs for 100% sheet clamping, ensuring clean cuts and operator safety. Find more here - / Contact us at -
Manufacturer: Baykal Model: MGH 3110 Cutting length: 3060 mm Heavy-duty hydraulic swing beam shear CNC Control: CYBTOUCH 8W Suitable for processing all types of sheet metal Max sheet thickness: up to 20 mm Max sheet length: up to 4100 mm The MGH” series of hydraulic guillotine shears from Baykal is designed for fast, precise, and economical cutting of sheet metal with thicknesses starting from 10 mm. This heavy-duty swing beam shear ensures a 100% secure sheet hold with its hydraulic hold-downs. Sheet feeding is assisted via a support table with integrated ball rollers, and pressure regulation is possible to optimize cutting performance. Find more here - / Contact us at -
Manufacturer: Baykal Model: HNC 3110 Cutting length: 3070 mm Hydraulic guillotine shear (sliding ram type) Ideal for narrow strips and all sheet metal types Max sheet thickness: up to 20 mm Max cutting length: up to 6070 mm (model range) Finger guard for safety CNC control: CYBTOUCH 12G Automatic blade gap adjustment The Baykal HNC 3110 is a CNC-controlled hydraulic guillotine shear from the HNC series, designed for precise processing of all types of sheet metal, especially narrow strips. It ensures high accuracy and clean cuts through automatically adjusted cutting angle, blade gap, and back gauge settings. This machine delivers consistent, burr-free cutting results and offers maximum reliability and flexibility. The model allows for a cutting length of up to 3070 mm and can handle sheet thicknesses up to 25 mm. Find more here - / Contact us at -
Key data: 160 t, 3700 mm
Control Delem ... DA - 56 s Thrust... 160t Bending length... 3700mm controlled axes ... 4 Drive... Hydraulic Max. ram stroke... 260mm Main engine power ... 15kW Machine weight ... 10700kg L x W x H ... 4750x1850x2660mm The machine is in good condition, possible to test under power.
sheet width: 3060 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: 20 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° Control: ELGO Number of working hours: ~ 1.100 h total power requirement: 11.0 kW weight: 5250 kg range L-W-H: 3800 x 1940 x 1560 mm from a maintenance workshop with only approx. 1.100 operating hours () Equipment: - electro-hydraulic swing beam shears - ELGO NC control unit for electric back stop Input of target/actual position value possible - NC electro-motoric back stop travel path of back stop X = 750 mm back stop ball screw with no play travel speed 100 mm/sec - electric cutting length limitation cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment, via eccentric - tip operation with push buttons on the control panel on the left - ...
Key data: 3100 mm, 6 mm
Max. cutting length ... 3100mm Max. sheet thickness ... 6mm Drive... Hydraulic Main engine power ... 11kW Number of strokes ... 20/min Machine weight... 5500kg L x W x H ... 3900x2560x1560mm The machine is in good condition, possible to test under power,
pressure: 60.0 t chamfer lenght: 2600 mm distance between columns: 2050 mm column arm: 310 mm working feed: 10.0 mm/sec return speed: 61.0 mm/sec stroke: 100 - 140 mm dayligth: 450 mm table height: 860 mm oil volume: 100 ltr. Control: ELGO P8822 operating pressure: max. 200 bar Number of working hours: ca. 2.370 h voltage: 380 V total power requirement: 5.5 kW weight of the machine ca.: 5000 kg. range L-W-H: 3000 x 1850 x 2050 mm good / well-maintained condition () with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on request in checked conditions - machine video - https://www.youtube.com/watch?v=PsUeM3O5wAM Equipment: - NC electro-hydraulic press brake - with ELGO NC control unit P8822 Input of target/actual values for back stop Input of target/actual values for depth adjustment ` swiveling operation, front left manual mode selectable - ...
Two identical smoking and cooking systems are available. Suitable for the production and refinement of sausages and meat products, poultry, fish, cheese and baked goods, hot smoking, warm smoking, cold smoking, moist smoking, intensive smoking, quick smoking, reddening, sweating, scalding, steaming, cooking, hot air cooking, semi-preservation, baking, roasting and defrosting. Heating capacity: 24kW, connected load: 31.5kW. With operating manual. An on-site inspection is possible.
sheet width: 3060 mm plate thickness: 8.0 mm thickness at Niro-steel: 6.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: max. 10 - 15 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° back stop - adjustable: 6.0 - 750 mm Control: ELGO P9521 total power requirement: 18.5 kW weight: 6300 kg range L-W-H: 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s - 1x stable side stop With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with ...
BAYKAL BPS3006 plasma cutting machine was built in 2020 in Turkey by BAYKAL MAKINA SANAYI VE TICARET A.Ş. The machine is designed for precision plasma cutting of sheet metal and tubes. The machining process is performed on a large work table with a length of 6000 mm and a width of 3000 mm with an extraction system. This system is integrated with an industrial filtration unit, which removes any contamination generated during the cutting process on an ongoing basis. The plasma torch with an anti-collision system and automatic height adjustment is in turn powered by a powerful HYPERTHERM plasma source of the highest energy efficiency. The innovative True Hole cutting technology for mild steel ensures significantly better hole quality than was ever possible with the use of plasma. All this is complemented by extensive equipment, consisting of, among others, an intelligent CNC control and au ...
pressure: 180 t chamfer lenght: 3110 mm distance between columns: 2600 mm column arm: 410 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 80.0 mm/sec back stop - adjustable: max. 750 mm stroke: 260 mm dayligth: 460 mm table height: 880 mm oil volume: 210 ltr. operating pressure: max. 240 bar control: DELEM total power requirement: 15.0 kW weight of the machine ca.: 11.200 kg. range L-W-H: 4250 x 2000 x 2800 mm Current new price approx. 85.000 euros Special price on request Features: - Electro-hydraulic CNC press brake - With DELEM CNC control model DA 66W” 2D graphic programming Automatic bend sequence calculation and collision detection High-quality LCD screen (TFT) Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electric motor-driven backgauge (X axis) with 2x manually adjustable stop fingers - CNC electric mo ...
The machine is in good technical condition, after prior agreement it is possible to test it. Baykal HNC 3100/13 hydraulic sheet shears controlled by PLC. Steel 13mm Stainless steel 8mm Cutting length 3070mm Cutting angle 0.5-2.5 degrees Weight 13t
pressure: 35.0 t chamfer lenght: 1250 mm distance between columns: 1070 mm piston stroke: 150 + 60 mm column arm: 410 mm table height: 800 mm dayligth: 470 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec table width: 140 mm Control: ELGO NC Number of working hours: ~ 9.600 h oil volume: 80.0 l operating pressure: max. 240 bar voltage: 380 V total power requirement: 4.0 kW weight: 2200 kg range L-W-H: 1800 x 1450 x 2150 mm Well maintained condition With only approx. 9.600 operating hours () Features: - Robust NC-controlled hydraulic press brake - With ELGO NC control unit P8822” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swiveling control panel, front left - NC electric motorized backgauge (X axis) With 2x stop fingers, manually adjustable (R+Z axis) - 1x split set of pointed tools - top - 1x rotatable Multi-V die block - Side saf ...
pressure: 35.0 t chamfer lenght: 1250 mm distance between columns: 1095 mm stroke - stepless adjustable: 215 mm column arm: 410 mm table height: 800 mm dayligth: 455 mm working feed: 10.0 mm/sec return speed: 56.0 mm/sec work height max.: ca. 875 mm Control: DM 51 Number of working hours: ~ 13.300 h oil volume: 80.0 l operating pressure: max. 240 bar voltage: 380 V total power requirement: 4.0 kW weight: 2500 kg range L-W-H: 1700 x 1450 x 2250 mm Features: - Robust CNC-controlled hydraulic press brake - With DELEM CNC control unit DM 51” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Program + tool storage possible Swiveling control panel, front left - CNC electric motor-driven backgauge (X axis) - CNC electric motor-driven height adjustment of the stop (R axis) - 2x manually adjustable stop fingers - 1x split set of deer foot tools - top - 1 ...
pressure: 180 t chamfer lenght: 3100 mm distance between columns: 2550 mm throat: 310 mm stroke: 200 mm ajustment speed: 80.0 mm/sec working feed: 10.0 mm/sec return speed: 58.0 mm/sec dayligth: 385 mm table width: 240 mm work height max.: 885 / 1050 mm oil volume: 180 ltr. total power requirement: 15.0 kW weight of the machine ca.: 9850 kg. range L-W-H: 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition () - in checked condition - machine video - https://www.youtube.com/watch?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) with 4x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) with digital position display ...
A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible.
This Baykal BPH 1503 + Hypertherm HPR 130 Plasma Cutting machine Machine was manufactured in the year 2012 and has 18000 production hours. It is equipped with a Baykal control unit.
This 4-axis Baykal APHS 31120 press brake was manufactured in 2020. It features a 120-ton press force, a bending length of 3100 mm, and a Delem 66t CNC control unit for precise operations. The backgauge X range extends to 1000 mm, and it includes European clamping with a sectioned punch and die. Consider the opportunity to buy this Baykal APHS 31120 press brake. Contact us for more information about this machine.
pressure: 035 t chamfer lenght: 1250 mm distance between columns: 1070 mm piston stroke: 150 + 60 mm column arm: 410 mm table height: 800 mm dayligth: 470 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec table width: 140 mm Control: ELGO NC Number of working hours: ~ 9.600 h oil volume: 80.0 l operating pressure: max. 240 bar voltage: 380 V total power requirement: 4.0 kW weight: 2200 kg range L-W-H: 1800 x 1450 x 2150 mm Well maintained condition With only approx. 9.600 operating hours () Features: - Robust NC-controlled hydraulic press brake - With ELGO NC control unit P8822” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swiveling control panel, front left - NC electric motorized backgauge (X axis) With 2x stop fingers, manually adjustable (R+Z axis) - 1x split set of pointed tools - top - 1x rotatable Multi-V die block - Side saf ...
This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 Ã 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine.
This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 Ã 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information.
This Baykal HNC 3100x13 shearing machine was manufactured in 2009. It features a cutting capacity for St 42 at 13 mm and a cutting length of 3060 mm. Main voltage is 380/50/3 with a robust 30 kW motor. The machines substantial weight of 13000 kg ensures stability and precision in operation. For more information about this shearing machine, please reach out to us.
This 4-axis Baykal APHS 31440 press brake was manufactured in 2020. It features a pressing force of 440 tons, a bending length of 3100 mm, and a stroke length of 330 mm. With a motor power of 35 kW and a machine weight of 23500 kg, it includes CNC crowning and a European clamping system. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31440 machine we have for sale. Contact us for more information.
The machine is in good technical condition, testing is possible after prior agreement. Pressing force: 35 tons • Working length: 1250 mm • Control system: CNC (precise adjustment of angles and stops) • Condition: Fully functional, currently not connected. Main advantages: • High accuracy: Stable frame and precise positioning for high-quality bending. • Compact dimensions: Ideal solution even for smaller workshops and operations. • Accessories: The sale includes the equipment visible in the photos.
CNC press brake Type: APH-S 3106×120 Manufacturer: Baykal Year: 2005 Control: Delem DA 66W (graphical 2D programming) Press force: 120 t Working length: 3100 mm Automatic calculation of the bending sequence and collision detection X-axis rear stop with 2x manually adjustable stop fingers CNC electromotoric rear stop height adjustment (R axis) CNC electrically controlled table deflection ROLLERI upper tool adapter Equipment and accessories: Front protection device (hinged door) Rear protection device (sliding door) 1× freely movable two-handed / foot control User manual including CE declaration Machine in good condition, fully functional, under power Find more here - / Contact us at -
Grinding machine, angle grinder, rotary steel grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, double bench grinder -Manufacturer: Gebr. Bayer, tool grinding machine with 2 stations -Motor power: 0.75 kW -Speed: 2800 rpm -Grinding discs: Ø max. 225/160 mm -Coolant device: -Dimensions: 1210/710/H1340 mm -Weight: 195 kg
drill diameter: 50 mm total power requirement: 0,75 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3060 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: max. 10 - 15 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° back stop - adjustable: 6.0 - 750 mm Control: ELGO P9521 total power requirement: 18.5 kW weight: 6300 kg range L-W-H: 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s - 1x stable side stop With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with ...
Additional title: Vertical tank, Capacity: 5244 l, Max. allowable operating pressure: 5 bar, Operating temperature: 20 °C, Width: approx. 1600 mm, Height: approx. 3200 mm, Material: Stainless steel 1.4541, Position: vertical, Base construction: 3 x feet, Features: Manway; safety valve; CIP piping
The scope of delivery includes: Steel panel, new Material colour: sendzimir galvanised Total width: approx. 295 mm Total depth: approx. 1,110 mm Inner depth: approx. 1,104 mm for column depth: approx. 1,100 mm Clear span: approx. 992 mm Truss support: approx. 55 mm Height of bending: approx. 25 mm Material thickness: approx. 2.00 mm Weight / piece: approx. 5.95 kg Other quantities on request. Quantity: - clear width trusses: 01 pcs. 02 pcs. 06 pcs - 1,800 mm 07 pcs - 2,100 mm 08 pcs - 2,400 mm 09 pcs - 2,700 mm 10 pcs. - 3,000 mm 11 pcs. - 3,300 mm 12 pcs - 3,600 mm 13 pcs - 3,900 mm 20 pcs. 50 pcs. 75 pcs. 100 pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is a ...
maximum number of results exceeded
please refine your search
10 € 
