batteries used for sale

Charging for forklift trucks with traction battery 80 volts Type Tebetron-E 50/80 Power connection 380Volt Power 80 Volt 50 Ampere Connection to the battery Rema 160A (see picture), other plugs available. Digitally monitored charging for saeure batteries e.g. 5PZS750 Mass approx. Height 110cm Width 55cm Depth 40cm Weight 80kg Ready to use Special price

Material width max. 820 mm PET 12 to 20my OPP 15 to 75 my BOPP 12 to 75 my OPA 30 to 50 my Paper 45 to 110 g/m2 Composite foils with aluminium 40 to 250 my Composite foils without aluminium 40 to 250 my Main functions of the machine Previously used for priming and varnishing various plastic films and composites, also used after digital printing. Technical specification Unwinding Roll diameter Up to 1 000 mm Core diameter 76 and 152 mm Roll weight Up to 1 000 kg Side edge control FIFE DP-30 Web Guide Controller. Pre-treatment station Corona AHLBRANDT TG 3104-TP Gravure coating unit 2 coating carriages 1 for primer and 1 for varnish. For coating cylinders circumference 350 to 860 mm. Bale width 900 mm Some coating cylinders. DRYER With circulating air up to 120°C Dryer length 2 x approx. 2.2  ...

The FDR D-EVO Suite is the flexible entry-level DR system. Optionally, one, two or even three wireless detectors can be used. The batteries can be charged via a charging station or an optional cable, so you have a ready-to-record detector at all times. (Source: Fujifilm.eu) Used system from a clinic and is equipped with a digital detector system. In very good technical and optical condition.

Key data: 240 , 300 , 400

Emergency power system NSA as a backup power system with a nominal power of 300 kVA with Volvo Penta engine TAD 842 GE grid-parallel Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine Model: TAD 842 GE Engine No.: on request Engine power: 273 KW PRP | 299 KW LTP Cooling: Water-cooled Tempering: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 + Diesel B 7 Generator manufacturer: Stamford AvK Generator type: S4L1D-D Gene. No.: on request Generator power: 300 kVA Voltage: 400 / 231 volts Power factor: cos. - PHI 0.8 Speed: 1500 rpm Tank: Design: Base frame tank with drip pan Capacity / litre: 500 Dimensions of the power unit: Width approx. mm: 1.350 Height approx. mm: 2.370 Length approx. mm: 3.770 Weight approx. KG: 3.700  ...

This is a completely new Handheld XRF Gun in full working order ready for use still in factory warranty. It has a great performance comparible to XRF such as Thermo Niton, Olympus Vanta or Bruker Titan or even other ED X-Ray Benchtop Spectrometer like Spectro Midex, Thermo Scientific, Bruker Mistral or Fischerscope. Original price of the system is more than 30.000Euros. It can analyze Precious Metals and Catalytic Converters very fast in 30sec. It is sold because we do not use it as much. SciAps X-505 Precious Metals Analyzer. Part No 910-500066 PM. Ultra lightweight X-ray analyzer featuring tapered, ergonomic design ideal for testing requirements. The X-505 utilizes a miniaturized X-ray tube, Rh anode (50 kV, 200 uA, 5 W) and high resolution, high count rate silicon drift detector (25 mm2 SDD, 140 eV at 5.95 Mn K-alpha line, at 90+% live time, 250k cps) for fast alloy chemistry  ...

Ups SOCOMEC MASTERYS MC MAS2MC + 120-00 120kVA with batteries manufactured in 2012.

volt: 12/24 V ampere: 50/75 A Power: max.10 KW weight: 20 kg dimensions: 320 x 380 x 780 mm Product description of the Telwin Sprinter 4000 Start 230 Volt 12-24V Mobile charger with jump start for charging lead / acid batteries. Equipped with jump start to start vehicles with an empty battery. If the battery is heavier than 120 Ah (this is the limit to start at once), it can first be charged for 5 minutes and then restarted. Peak start current: 400 A. Included options: Long and flexible cables with compact terminals Switch for various functions with clear instructions Manual with clear instructions for use Solid plug for 230V power supply The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Production year: 2011 Control: Unilog B6S Robot: Yes Wittmann Robot W833 Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access zone

Model MC-800VF WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE FROM 1996 Brand MATSUURA Type Vertical Machining Centers Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp RPM 12000 rpm ATC 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG TRAVELS: X = 800mm, Y = 440mm, Z = 485mm mfg MATSUURA mpn MC-800VF Matsuura MC-800VF WITH 4 TH 5 TH AXIS MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP MADE.

Genie GS-2046 Self-Propelled Scissor Lift The quiet, emission-free Genie GS-2046 scissor lift is the ideal machine for construction site, maintenance and installation applications on solid surfaces, indoors and outdoors. With an impressive working height of 8.10 m, it offers sufficient space and stability for workers and equipment Manufacturer: Genie Model No.: GS-2046 Year of construction: 2005 Equipment • Folding railing with full-height platform swinging door • Joystick control: two lifting and travel speeds & two pre-selectable speed levels • User-friendly diagnostic system • Platform control panel with battery charge indicator • Fully integrated diagnostic system • Power cable to platform • Attachment points for harnesses • Emergency release valve for manual lowering of the platform • Emergency stop switch on platform and floor control pane ...

Used scissor lift Int. Art. Ref. m3459 Manufacturer: Haulotte Type Compact 8 Year of construction 2007 Batteries approx. 1.5 years old Dimensions (L x W x H): 250 x 80 x 200 cm Weight: 1.730 KG Operating hours: approx. 380 h Propulsion: Electric Platform height: 6.2 meters Working height: 8.2 meter Platform dimensions: 230x80 cm Expandable platform: 92 cm Max. platform load: 350 KG With intergr. Charger Location: 59425 Unna The machine can be viewed and tried out. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge  ...

Self-propelled 3-row top-lifting harvester DEWULF ZK III SE, Manufacturer: DEWULF Type ZK III SE Factory number 5913733, Year of production 2013, Engine: Deutz 238 kW, No batteries - mileage cannot be verified Visible signs of corrosion and oil leaks. Dewulf ZK lllSE is a self-propelled 3-row top lifting harvester with a spike unit and a discharge elevator (for harvesting, among others, carrots, parsley, red beet, celery). According to the information provided by the manufacturer, depending on the logistics used, it is possible to collect products from 4-5 hectares during the day, ensuring optimal conditions, resulting in a high-quality final product. After the vegetables pass through the cutting set, the product is transported further using a cross belt. There is a large spiked belt behind the conveyor belt, which ensures complete cleanliness of the product immediately after c ...

Production year: 2011 Control: Unilog B6S Robot: Yes Wittmann Robot W833 Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access zone

From a company liquidation of a robot service company, we offer a refurbished KUKA robot. The system is operated via an RCM3 control system. The device was kept as a backup system for a specific customer. The backup batteries are empty and need to be replaced. Software, data transmission device and documentation are available. In addition, all axis controllers and other control cabinet assemblies are available as redundancy in the package. After the overhaul, the system has only completed the test runs, so it is in very good condition. Ideal for securing spare parts or for use in handling tasks.

The electric self-propelled machine has two rotating brushes it also works with chemicals and doubles as a wet vacuum cleaner with a rubber blade. Manufacturer: CLEANFIX Accommodating size: 1300 x 1100 x 1100 mm Rotating brush diameter: 2 x 250mm Electrical supply voltage: 24V from 2 lead-acid batteries

Offer: Battenfeld HM 400/2250/750S Year/year 2011  ps: new screw + cylinder 65mm/ new screw+barrel 65mm  Production year: 2011 Control: Unilog B6S Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access  ...

Pick by Voice System, Honeywell, A500 and A720 - used - : Prices per piece ex location: A500: 1.250.-€ (net) A720: 1.450.-€ (net) Price for complete acceptance: 15.000.-€ (net) then incl. all spare parts such as batteries, carrying straps, spare attachments for the ear cups and microphones etc. Manufacturer: Honeywell Type: A500 – 13 pieces Type: A720 (newer model) – 5 pieces Original price per system approx. 3.600.-€ (net) Each set includes one device with 1 pair of headphones Condition: very good Available: from now on D-64859 Eppertshausen

FlexLink Plastic Mat Chain Conveyor Together, the FlexLink standard conveyor systems cover a wide range of applications.  The flexible conveyor systems use plastic chains in a variety of shapes and designs.  The chain shape allows horizontal and vertical changes of direction.  With a product width of up to 400 mm, the chains have a width of 43 mm up to 295 mm. Each system consists of several modules that can be assembled with simple hand tools. Suitable for a wide range of applications.  Preferred for high-speed applications. Examples of areas of application Toilet paper, gear wheels, spray cans, ball bearings medium size, piston parts, yoghurt, injectors, Dry batteries, plastic bottles, matches, cheese boxes, coffee and tea packaging. A FlexLink conveyor can operate at temperatures between -20°C and +60°C. FlexLink Conveyor System X65 Total length: 7000 mm  ...

A fully equipped line for the production of polypropylene yarn type Technorope 1000/100/PP-300: Manufacturer: Sima Srl Useful width of the cutting head: 1000 mm Capacity: up to 300 kg/h, depending on the type of yarn Twister: 16 (with 16 batteries) Yarn types: from 5000 to 120 000 denies

This device is calibrated for rapid detection of metals in scrap and recycling. Within a second, you can see V2A, V4A, chrome steel, bronze, gunmetal, aluminum alloys and much more. The device is not suitable for precious metals or catalysts. The device has only been in use at the customer for about 3 years and is in good condition. The device includes two batteries for about 8 hours of operation each, a charger with charging cradle and the transport protective case. In contrast to newer devices, the internal camera is also unlocked here, so that you can save images of the measuring range in the device. The device has received all available software updates and can be used in conjunction with the smartphone app, via cloud computing or even as a single device.

Available in stock 1 x Complete Containerized Gas Power Plant based on 1 x 725 kW Guascor FGLD 480. The power plant is mounted in a 40 ft container with its corresponding alternator, gas connection with regulation system, electronic control system and rest of auxiliaries (batteries, refrigerators, switches and control cabinets). Manuals and electrical diagrams are also available. The unit is in our warehouse - ready to go. Equipment in good working conditions.

Condition : Used ( Very good ) Manufacturer :OLYMPIAN Caterpillar Model : GEP 275 Power : 220 Kw/275 KVA Engine:Perkins6Cylinder Turbo Diesel RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Year built in :2007 Operating hours:2500h - Complete with controls - Incl. batteries - Incl. diesel tank in the base frame - Ready to use - Delivery against 1200, - € is possible

The machine cannot be started up at the moment, it will probably be the memory batteries of the control, including replacement control with display, an inspection is possible.

Roughness measuring device from the Hommelwerke. The following parts are part of the delivery: - T1000E measuring station - The Hommel Tester LV15 with installed skidding probe T1E, ArtNr 240000 - Power supply for charging the batteries: Type FW 1289 - Control cable for the LV15 to the T1000E - Hommel Printer P 1010 with started paper roll and start print head. -Suitcase

Machine number: 2022-548 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers For sale we have new diesel generator sets with the following data: Condition: New Engine Cummins Model: 4BTA3.9-G11 Rated Power: 77KvA Continuous power: 70KvA Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 rpm. Year of construction: 2023 Included: Diesel filter, air filter, oil filter High-quality sound hood made of galvanized steel Water preheater Diesel tank, approx. L234 Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller-DEEPSEA: Model: DSE6120 UK Protection: • Low oil pressure • High water temperature • High/low voltage • High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Startup error  ...

Max. load: 227kg, operational hours counter: 979h, with documentation, the machine has not been used for 2.5 years, the slewing ring makes noise when extended, the brakes are difficult to control, brakes somewhat abruptly, the batteries were renewed a few years ago, an on-site inspection is possible.

Machine number: 2022-546 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers For sale we have new diesel generator sets with the following data: Condition: New Engine Cummins Model: 4BTA3.9-G2 Rated Power: 55KvA Continuous power: 50KvA Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 rpm. Year of construction: 2023 Included: Diesel filter, air filter, oil filter High-quality sound hood made of galvanized steel Water preheater Diesel tank, approx. 234L Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller-DEEPSEA: Model: DSE6120 UK Protection: • Low oil pressure • High water temperature • High/low voltage • High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Startup error  ...

Machine number: 2022-549 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers For sale we have new diesel generator sets with the following data: Condition: New Engine Cummins Model: 6BTAA5.9-G12 Rated Power: 165KvA Continuous power: 150KvA Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 rpm. Year of construction: 2023 Included: Diesel filter, air filter, oil filter High-quality sound hood made of galvanized steel Water preheater Diesel tank, approx. L342 Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller-DEEPSEA: Model: DSE6120 UK Protection: • Low oil pressure • High water temperature • High/low voltage • High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Startup err ...

Machine number: 2022-547 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers For sale we have new diesel generator sets with the following data: Condition: New Engine Cummins Model: 4BTA3.9-G13 Rated Power: 110KvA Continuous power: 100KvA Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 rpm. Year of construction: 2023 Included: Diesel filter, air filter, oil filter High-quality sound hood made of galvanized steel Water preheater Diesel tank, approx. L234 Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller-DEEPSEA: Model: DSE6120 UK Protection: • Low oil pressure • High water temperature • High/low voltage • High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Startup erro ...

Machine number: 2022-545 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers For sale we have new diesel generator sets with the following data: Condition: New Engine Cummins Model: 4B3.9-G12 Rated Power: 33KvA Continuous power: 30 KvA Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 rpm. Year of construction: 2023 Included: Diesel filter, air filter, oil filter High-quality sound hood made of galvanized steel Water preheater Diesel tank, approx. 135L Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller-DEEPSEA: Model: DSE6120 UK Protection: • Low oil pressure • High water temperature • High/low voltage • High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Startup error  ...

Scrubber dryer Daewoo DAFL50A like Hako Scrubmaster new year of manufacture 2022 Brand: Daewoo Type: DAFL50A Year: 2022 Working width: 500 mm Electrical: Yes Hours on display: 0 hr Battery Charger: Yes Electrical connection: 220 V Weight: 160 kg Overall dimension L: 1250 mm Overall dimension B: 550 mm Overall dimension H: 1150 mm Description Including batteries, including charger to 220 volts

Floor scrubbing machine Kärcher B40 W Bp Year of construction: 2012 new batteries Weight: approx. 205kg

welding machine, welding rectifier, jump starter, battery starter, charger VISZEK TIRISZTAR 24 SV built: 1988 Charging current: max. 63 A < < 2br />Jump start: max. 400 Abr /> Welding current: max 130 A 9 kW 380 V 3AC used, checked! without batteries ! Dimensions: 820 x 520 x 940 mm

Key data: 400 , 500 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 10V1600G20F-3B Engine No.: on request Power: 430 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 / Diesel B 7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 D Gene. No.: in production Generator power: 550 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 2.060 Height approx. mm: 2 ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine: TWD 16 45 GE Engine No.: on request Power: 616 KW PRP | 675 KW LTP Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S6L1D-C Gene. No.: on request Generator power: 700 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 950 Dimensions of the power unit: Width approx. mm: 1.860 Height ap ...

Execution: Aggregate type: stationary Execution: Skid frame Technical data engine: Engine manufacturer: MTU Engine: 20 V 4000 G 34 F Engine No.: in production Power: 2590 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: Synchronous with AVR Gene. No.: in production Generator power: 3000 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 2000 Dimensions of the power unit: Width approx. mm: 1.887 Height app ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Perkins Engine: 404A-22G1 Engine No.: in production Power: 18.4 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator type: NPE32-2M/4C Gene. No.: in production Generator power: 20 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Hand & Remote Start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 90 Dimensions of the power unit: Width approx. mm: 700 Height approx. mm: 1.650 Leng ...

Infratec VarioCAM HDx 625 Professional infrared camera Thermal imaging camera 5.6 " TFT thermography measuring system with IRBIS software remotely controllable via PC Condition: Used TOP condition - purchase 2020 - functionally tested - rewriting of the SW license included Thermography measuring system and infrared thermal imaging camera Type: VaroCAM HDx 625 Manufacturer: InfraTec GmbH, Dresden, Germany Date of purchase according to invoice: 18.09.2020 Typical areas of application are: - Therographic inspection of electrical and mechanical installations and aggregates - Optimization of components and assemblies - Material investigations - Control of process temperatures -Quality assurance - Building thermography Execution: - 5.6 " TFT monitor for the live image - Detector format 640 x 480 -Distance measurement - permanete autom. Focusing - Spot editor (tem ...

We offer it dismantled and CIF ITALIAN PORT., In very good conditions,still connected, can be seen in work on appointment or on a video call. The line includes: N. 2 extruders diam. mm.55, 78 kW 30 L/D N. 1 extruder diam.75 mm. 142 kW, 30 L/D n. 3 lever type screen changers Melt control system 3-layers still die Ø mm.300 gap. mm.1,4 IBC cooling system AM500/2 dual flow cooling ring 2 temperature exchange batteries electrical cabinets with Mitzubishi inverters Oscillating pull-off system width mm.1700, working width mm.1600, Gusseting units FIFE web guider mm.1700 Bubble driver with vertical adjustment and sensor for automatic bubble inflating (maximum Ø 1.175 mm.) for 3.386 mm.web circumference) Back to back winding station 1.680 with 4 expandible mandrels Automatic film cutting Automatic reel unloading system Bolted 12 m.tall tower with 3 storey, ladders (10 m. at 3rd floor + 2 m. pul ...

Complete line for bottles composed of : Depalletizer, unpacker, bottle blower, filler- screw capper, cartoner, carton labeller, case packer and palletizer. Equipment out of production in 2020 Documentation available + lots of spare parts for each machine. 2 formats available. Capacity : 6000 bottles/hour in 370 ml 7500 bottles/hour in 200 ml. Complete line for bottles composed of the following elements: PRB Depalletiser - Destratus R99214 Year: 2004 Installation of PRB in 2004 Depacker / Accumulation table St Gobain Debalpack 800 Year: 1986 NO LONGER AVAILABLE : IMA Mystral - Bottle Blower Y16 LB3023 Year: 2009 Monoblock filling / sealing bottles: IMA Farmomac F370 18VL 8C Filler + screw capper / sealer 3700026 Year: 1987 Refurbished in 2004 NO LONGER AVAILABLE : Flexlink conveyor and accumulation table Year: 2004 Cartoning machine CAM HF ...

Hammer drill, chisel hammer, combination hammer, Bosch hammer, cordless hammer drill -Manufacturer: Hilti, cordless hammer drill type TE 6-A -Power: 36V -incl.: charger and accessories with case, without batteries -Dimensions case: 580/400/H145 mm -Total weight: 8 kg

Battery charging cabinet, battery, emergency power battery, emergency power battery, emergency power system, power supply system, lead battery -Manufacturer: multipower, 2 lead batteries mounted on the base plate. -Power: 12 V 7.2 Ah each -Dimensions: 200/200/H120 mm -Weight: 5.6 kg

Rotary hammer, chisel hammer, combination hammer, Bosch hammer, cordless hammer drill -Cordless hammer drill: Bosch GBH 36 V-LI Professional -incl.: batteries, charger and accessories with case -Power: 36 V -SDS Plus: recording -Dimensions case: 500/395/H140 mm -Weight: 13 kg

Power supply systems, construction site emergency lighting, escape sign luminaires, escape route luminaires, emergency and escape route lighting, emergency lights, escape routes -Emergency lighting with: charger and controller and batteries -Dimensions: 630/390/H260 mm -Weight: 25 kg

Power supply systems, construction site emergency lighting, escape sign luminaires, escape route luminaires, emergency and escape route lighting, emergency lights, escape routes -Emergency lighting with charger and controller and batteries -Dimensions large lamps: 665/180/H120 mm 36 pieces -Dimensions small lamps: 420/170/H90 mm 14 pieces -2x items of lamps: with charger and control available -Price: per item -Weight: 820 kg/item

The wireless recorder with probes allows you to quickly build and expand a centralized temperature monitoring network. No need to physically read data, preview of all sensors in one place, the ability to report alarms visually, acoustically, via e-mail or SMS, these are just some of the advantages of modern JRI wireless data recording systems. JRI is a French company founded in 1845, producing, among others, SPY RF recorders The kit includes: -> SPY SIRIUS RECORDER (ModeM) -> SIRIUS Lite SOFTWARE -> 14 ELECTRONIC THERMOMETERS with 27 PROBES, including: 2 x ELECTRONIC THERMOMETER SPY RF U2 wireless with 2 probes (range: -50 to + 180 C) 11 x ELECTRONIC THERMOMETER SPY RF N2 wireless with 2 probes (range: -40 to + 80 C) 1 x ELECTRONIC THERMOMETER SPY RF N2 wireless with 1 probe (range: -40 to + 80 C) Year of production / purchase: 2015-2018 (system expansion) Due to the liquid ...

sheet width: 1250 mm plate thickness: 16.0 mm thickness at Niro-steel: 10,0 mm blade length: 1300 mm cutting angle: 2-3 Grad no. of strokes: 13 Hub/min back stop - adjustable: 500 mm Control: konv. table height: 810 mm blade length: 1300 mm oil volume: 350 l engine output: 18.5 kW weight: 3900 kg range L-W-H: 2150 x 1200 x 1900 mm Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale - hydraulic cutting angle adjust ...

UPS Effekta Pegasus 200 kVA Uninterruptible power supply 3 phases Batteries were renewed 06/2019 and are tested all still have between 12.9 and 13.0 V and that after 3 months, are stored on a separate pallet the power supply is in 1A condition and does not come from the manufacturing industry 2 months return policy

Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Tray dimensions: 1200 x 1200 mm Mini/maxi mould: 380/825 mm Max gap between trays: 1595 mm Screw diameter: 60 mm Screw length: 25D Injection volume: 763 cm3 Injection pressure: 2106 bar Motor power: 135 kW Heating power: 27.9 kw Injection weight: 24 tons Dimensions length: 8m Dimensions width: 2.2 m Dimensions height: 2.70 m robot interface Bi-metal 2 blowguns, 3 batteries on injection, 16 hot channels

Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Tray dimensions: 1200 x 1200 mm Mini/maxi mould: 380/825 mm Max gap between trays: 1595 mm Injection: Screw diameter: 60 mm Screw length: 25D cm3: 763 Bars: 2106 General: Motor power: 135 kW Heating power: 27.9 kw Options: Cores: Robot interface: YES Bi metal: YES Others: 2 BLOW GUNS, 3 injection batteries, 16 hot runners