129,021 used machines on RESALE, but how to find them? Machine Search
A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ...
Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric
Year of manufacture: 1989 / 2018 overhauled Single head max nozzle 180 mm PWDS (Feuerherm) Control: Beckhoff Operating hours: since overhaul 2018
BATTENFELD EXTRUSION LINE FOR PVC, EVA,.., including:, PAPENMEIER MIXER, type TSEH 200/KMSU 400 L, construction year 1991, Electrical power heating 30/35 kw - Cold 6,0/7,5 kw, including supporting structure, Total dimensions LWH : 2.4002.6502.550 mm., Weight : about 3.000 kg., BATTENFELD EXTRUDER, metal detector, feeding unit, barrel with screw 150 mm., 7 heating areas, 5 cooling fans, Assea 110 kw Drive, vacuum degassing pump, screenchanger 2x 90 mm.Ø, heating 4,0 kw, Gneuss temperature probes, hydraulic power station 2,3 kw, air pelletizer, variable speed, self adjusting knives, 1,5 kw drive, adjustable pressure, extra (Bausano cutting system with inverter), pellets cooling unit, vibrating screen with one air turbine on each side, Constructed in 1989, Documents available, offered AS IS WHERE IS or CHECKED., CUTTING: AIR
CALIBRATING TABLE BATTENFELD K 160 V2, 2 Speck v-pumps 4 kw / 2 sections, 16 x vacuum-connections, 12 x water-connections, Blower for drying, HAUL OFF BATTENFELD P 100 SV, 2-belt haul-off (type caterpillar), Contact 1.200 x 160 mm, Speed approx. 0,5 – 15 m/min., Motor-power approx. 4 kw, Pulling-power approx. -6.000 N maxi., SAW BATTENFELD SPR 32 P, Profile-saw upstroking, Blade Ø 300 mm, Chip/dust-suction, control panles,, Electric manuals available
Key data: 1100 kN, 25 mm
warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG
B&A REF: 9170 TON: 50 SCREW DIAMETER: 14MM SHOT WEIGHT: 1 STROKE VOLUME: 1.1CM3 INJECTION PRESSURE: 2500AR PLATEN SIZES: 364 X 196MM MIN MOULD HEIGHT: 100MM MOULD OPENING STROKE: 200MM MAX DAYLIGHT: 300MM EJECTOR STROKE: 50MM CONTROLS: UNILOG B4
Machine in perfect condition, immediately ready for use, overhauled 2018/19, Operating h: approx. 6,000 Beckhoff control system Head 160 Single with Viewing Strip and PWDS Video on request
Injection moulding machine Battenfeld Machine Type TM 2700/2800 Control Type B2 Year of construction 2003/04 Screw diameter 75 mm
Injection moulding machine Battenfeld TM 4500/2800 BJ 2002
Key data: 650 kN, 22 mm
Injection moulding machines BATTENFELD HM 65-130 Stock No.: 503671 Manufacturer: BATTENFELD Type: HM 65-130 Control: UNILOG B6 Year of Make: 2011 We offer for sale a used injection moulding machine BATTENFELD HM 65-130 from 2010. Ideal for a wide range of plastic processing applications, this compact and powerful injection molding machine gives you precision, reliability, and energy efficiency in a rugged design. The BATTENFELD HM 65-130 is perfect for producing high-quality plastic parts with high repeatability and is particularly energy efficient, making it a cost-effective solution for your production needs. Why should you choose this injection molding machine? Compact design: Ideal for smaller production spaces without compromising on performance. Energy efficiency: Low energy consumption for sustainable and cost-effective production. Reliability: Excellent machine q ...
This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details.
Key data: 3000 kN
Battenfeld EcoPower SE 300/1330 / Electric Machine Year of Make: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Spray pressure: 2470 bar Dosing volume: 540 cc Clamping unit: Clamping force: 300 t Tiebar spacing: 770x720 mm Size of the clamping plates: 1090x1170 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air Valve x 8 Control with hot runners x6 Hardened injection unit - Bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/Width/Height: 7.20x2.04x2.20m Drive: Pumps/motor: 0 kW Heating capacity: 22 kW Total power: 0 kW All offered machines are started by our servic ...
Key data: 2700 kN
Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Spray pressure: 2041 bar Dosing volume: 653 ccm Clamping unit: Clamping force: 270 t Handlebar spacing: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with parallel horizontal injection units Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control with air valve Hydraulic core pull x 3 Reinforced Injection Units – Bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm I ...
Key data: 3000 kN
Battenfeld HM 300/2250S with the Wittmann W818 robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of Make: 2007 Injection unit: Screw diameter: 55 mm Injection weight: 702.5 g Spray pressure: 2500 bar Dosing volume: 772 ccm Clamping unit : Clamping force: 300 t Spar spacing: 710x630 mm Size of the clamping plates: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection New original screw and barrel are installed in the machine Robot Wittmann W818 4-axis, high-speed robot: ...
Key data: 1500 kN
Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with the Rotary Molding Machine Year of Make: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Spray pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Spar spacing: 0x0 mm Size of the clamping plates: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Vertical Injection Molding Machine with the Rotary Molding Machine Hybrid machine: high-speed, energy-saving and very quiet Air Valve x 5 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Rotary table diameter: 1500 mm Rotary table driven by a servo motor, controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83x1.50x4.07 m All offered machines ...
Key data: 1300 kN
Battenfeld BA 1300V/315 V-R / Vertical Injection Molding Machine with the Rotary Table Year of Make: 1997 Injection unit: Screw diameter: 40 mm Injection weight: 182.9 g Spray pressure: 1575 bar Dosing volume: 201 cc Clamping unit: Clamping force: 130 t Handlebar spacing: 454x740 mm Size of the clamping plates: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 4000 Additional equipment: Air Valve x 5 Hydraulic core pull x 1 Rotary table: 1250 mm The vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7500 kg Length/Width/Height: 3.83x2.33x4.16 m Drive: Pumps/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live te ...
Key data: 1500 kN
Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating Hours: approx. 29,000 in automatic mode Year of Make: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Spray pressure: 1714 bar Dosing volume: 442 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x470 mm Size of the clamping plates: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total number of operating hours: 36,714 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 6600 kg Length/Wid ...
Key data: 1100 kN
Wittmann Battenfeld EcoPower 110/350 / Electric motor / Operating hours: approx. 15,000 in automatic mode Year of Make: 2019 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 682x682 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 21,800 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Dimensions: Weight: 4800 kg Length/Width/Height: 4.91x1.42x2.10 m ...
Key data: 1100 kN
Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Clamping unit: toggle lever Control:UNILOG B8 - Touch Screen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements The machine was servi ...
Key data: 1000 kN
Battenfeld TM 100/525 Year of Make: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Dimensions: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...
Key data: 1000 kN
Battenfeld HM 100/525 with the Battenfeld R10S robot / Operating hours: approx. 19,000 in automatic mode Year of Make: 2008 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total number of operating hours: 26,580 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Battenfeld R10S robot Year of Make: 2015 5-axis robot: 3 axes are driven by servo motors (electric); Axis B - pneumatic, Axis C Robot with adapter Purchase of the r ...
2 x Battenfeld injection moulding machines type: TM 180/750 BJ 2010
Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Cyclus Battenfeld, operating unit from injection molding machine BA-T2400 / BA 600 CDC / A5002 03 1 04 -Type: MDE-BDE -Number: 3x control unit available -Price: per piece -Dimensions: 290/50/190 mm -Weight: 0.8 kg/pc.
Glass scale, glass measuring scale, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display, linear encoder -Length measuring device: from Battenfeld BA-T2400 injection molding machine, 2 pieces -Measuring length: approx. 950 mm -Price/Sale: complete -Dimensions: 1060/35/H85 mm -Weight: 4 kg/pc.
Glass scale, glass measuring scale, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display, linear transducer, displacement sensor -Manufacturer: Novotechnik, displacement sensor from injection molding machine Battenfeld -Type: TLH 450 -Dimensions: 640/65/H60 mm -Weight: 1 kg
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from Battenfeld BA 600 CDC injection molding machine -Type: PT-350/4.0/M/ FL086-E -Pump: Brueninghaus type A10VS 0 71 DFR1/31 210 bar -Motor: Brandstetter 11 kW / 1450 rpm -Individual components: see photos -Dimensions: 1130/430/H350 mm -Weight: 152 kg
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from Battenfeld injection molding machine -Type: PT-350/2.3/M/ FL 83 -Motor: ABB 11 kW / 1455 rpm -Individual components: see photos -Dimensions: 980/610/H490 mm -Weight: 184 kg
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards -Manufacturer: Cyclus Battenfeld, module from injection molding machine -Type: Cyclus PGA-A MDE-PGA -Quantity: 3x module available -Price per piece -Dimensions: 250/120 / H55 mm -Weight: 0.5 kg / pc.
CNC control, operator panel, control console, operating unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board -Manufacturer: Bosch, module from injection molding machine Battenfeld -Valve module: Bosch QV 60 0 811 405 099 -Dimensions: 220/45/H128 mm -Weight: 0.4 kg
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card -Manufacturer: Bachmann, analog distribution card from injection molding machine Battenfeld -Type: CVA500 CV-A500 B2532 / 00 -Number: 4x control card available -Price per piece -Dimensions: 160/100 / H40 mm -Weight: 0.2kg/pc.
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distribution print card -Manufacturer: Bachmann, distribution board from injection molding machine Battenfeld -Type: CV 32 B 2531/00 -Quantity: 10x module available -Price per piece -Dimensions: 100/80 / H30 mm -Weight: 0.1 kg/pc.
CNC control, operator panel, control console, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, circuit board, analog distribution board, distribution printed circuit board -Manufacturer: Bachmann, distributor print card made from injection molding machine Battenfeld -Type: CV 4 B 2528/00 -Number: 3 modules available -Price: per piece -Dimensions: 100/60/H30 mm -Weight: 0.1 kg/pc.
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, valve control -Manufacturer: Bachmann, valve amplifier from Battenfeld injection molding machine -Type: CPPV 200 KB 2525/00 -Quantity: 3x valve control available -Price per piece -Dimensions: 125/82/H35 mm -Weight: 0.4 kg/pc.
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control of electronic modules from injection molding machine Battenfeld -Card slot: Bachmann CST 500 (K1) / DNT B 2636/04 -Busprint: Bachmann BUS 500/1 B 6661/00 -Power supply: Bachmann DNT 90 / UB 6811/00 -Output card: Bachmann CA 16 / P 2.5 SB 6147/00 2 pcs. -Input card: Bachmann CE 32 / 1S B 6144/00 -Processor card: Bachmann CC 11/4 B 6047/00 -Coupling card: Bachmann KOP 500 U / SB 6786/00 -Control card: Bachmann MF 600/1 B 3736/01 -Temperature control card: Bachmann UTI 06 F1 B 2932/01 -Temperature control card: Bachmann UTR 300 -An ...
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, distribution board from injection molding machine Battenfeld -Type: Bachmann CV 16 P7,5 Art.Nr: 2530/00 -Quantity: 5x cards available -Price per piece -Dimensions .: 145/80 / H40 mm -Weight: 0.1 kg / pc.
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distribution board, valve amplifier, electronic module -Manufacturer: Bachmann gb, electronics module from injection molding machine Battenfeld -Type: ROB 01 Art.Nr: 2644/00 -Dimensions: 135/80 / H35 mm -Weight: 0.1 kg
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier -Manufacturer: Bachmann, electronic module valve amplifier from Battenfeld injection molding machine -Type: CPPV 200 SB 7621/00 -Quantity: 1x module available -Price per piece -Dimensions: 125/85/H30 mm -Weight: 0.2 kg/pc.
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control of electronic modules from injection molding machine Battenfeld -Input card: Bachmann CE 32/1 B 2600/01 4 pcs -Output card: Bachmann CA 16 / P 2.5 B 2596/00 5 pcs -Processor card: Bachmann CC 11/3 2 pcs. -Control card: Bachmann VID 500 B 2565/00 -Memory card: Bachmann MEM 501 B 4018/00 -Processor card: Bachmann STU 500 UB 2623/00 -Processor card: Bachmann STU 500 UB 4749/00 -Control card: Bachmann MF 600/1 KOP 500 U and KOP 500 ZB 2563/01 -Power supply: Bachmann SNT 411/2 -Card Rack: Bachmann BUS 618/1 BALS500 B 2568/00 -Analog ...
Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from Battenfeld injection molding machine -Type: MOD13/1X052-088 -Contr: TDM 3.2-30-300-W1 -Quantity: 2x servo controllers available -Price per piece -Dimension: 450/70/H325 mm -Weight: 8.6 kg/pc.
Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from Battenfeld injection molding machine -Type: MOD13/1X... -Contr: TDM 3.2-30-300-W0 -Quantity: 1x servo controller available -Dimension: 390/70/H325 mm -Weight: 7.7 kg
Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from Battenfeld injection molding machine -Type: MOD13/1X014-088 -Contr: TDM 3.2-30-300-W0 / TVM 2.1-50-W1-220 -Quantity: 1x servo controller available -Dimension: 390/105/H325 mm -Weight: 15,1 kg
CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control electronic modules from Battenfeld injection molding machine -Power supply: Bachmann SNT 411/2 -Control card: Bachmann VID 500 B 2565/00 -Memory card: Bachmann MEM 501 -Processor card: Bachmann STU 500 U -Electronic card: INC 500 B2562/00 -Analog card: Bachmann AIO 500 B 2585/00 -Processor card: UTU B 2933/00 -Temperature control card: Bachmann UTR 300 -Control card: Bachmann MF 600/1 B 3736/01 -Coupling card: Bachmann KOP 500 UB 2563/00 -Processor card: Bachmann CC 11/3 B 35227/00 -Output card: Bachmann CA 16/P 2.5 SB 2596/00 -Input card: Bac ...
Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, valve amplifier, valve control -Manufacturer: Bachmann, valve control from Battenfeld injection molding machine -Type: PVV100/SB 7827/00 -Quantity: 3x Modul card available -Price per piece -Dimensions: 130/50/H30 mm -Weight: 0.1 kg/pc.
Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, valve amplifier, valve control -Manufacturer: Bachmann, valve control from Battenfeld injection molding machine -Type: PVV100 B 2537/00 -Quantity: 1x control card available -Price per piece -Dimensions: 130/50/H30 mm -Weight: 0.3 kg/pc.
Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, temperature control card, amplifier card -Electronic module: from Battenfeld injection molding machine -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 115/80/H50 mm -Weight: 0.2 kg
Control card, plug-in cards, printed circuit boards, circuit board, coupling card, temperature control card -Manufacturer: Bachmann, temperature control card electronic module from Battenfeld injection molding machine -Type: RTR 04 Art.No.: 3020/00 -Quantity: 2x module available -Price per piece -Dimension: 130/25/H90 mm -Weight: 0.2 kg/pc.
- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.
Key data: 2400 kN, 594 g/PS, 55 mm
Injection Unit .../1330 Screw diameter 55 mm Spec. Spray pressure 2041 bar Injection volume 653 cc Injection weight in hp 594 g L/D Screw Ratio 22 Clamping unit 240/... Clamping force 240 t Size of the clamping plates 910 x 930 mm Lights spar spacing 630 x 570 mm Ejector force 59 kN Tool installation height 350 mm Opening way 725 mm Max. panel spacing 1075 mm Ejector path 200 mm Weight 10000 kg Dimensions(m) LxWxH 5.5 x 1.8 x 2.4 m Year of construction 2013 Control type Unilog B6
A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect.
maximum number of results exceeded
please refine your search
