battenfeld ba used for sale

GT-5355 Single Spindle Extruder - Brand: FLAG - Diameter: 80 mm 25 L/D - Spindle length: 2 meters - Extruder electrical panel

MD-0107 Overhead Cut to Water - Brand: BAUSANO - Model: TDF-500 - Year: 2015 - With 1.5 meter centrifuge - Made of stainless steel - 5.5 hp (4kw) - With water bath and electrical panel

Key data: 700 mm

Band saw Bäuerle Roll diameter 700 mm APA guides at the top and bottom! Runs great! Guided tours in a first-class condition Used machine Accessories lots of band saw blades

General SKU210X061 MakeTycon LocationBarneveld CEcheck TypeBE 4000 Pressure Working pressure20 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume4000 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity5425 l., (4000 l.) Vessel sizesDia. 1700x2300 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionscheck OutletDN100 With jacketcheck 550 l. Max. temperature-25°C/+200°C With propellor stirrercheck Motor15 kW, 400 volt, 1450 rpm, (Ex) Speed mixing shaft20-120 rpm Glass Reactors MaterialGlass - Enamel Information No.9950 Year of construction2002 Floorspace2,0x2,0 m Total height5,30 m Weight6700 kg Extra Specificationsreactor comes with outletvalve. a hastelloy spray ring is installed in the reactor. Glass-lined ReactorsTycon ItalyReactors > G ...

Planetary agitator ALEXANDERWERK, type: WR 40 -in good condition- Stirring, beating and kneading dough, meat and frothy masses - Machine was rarely used - Powerful agitator with powerful motor - Bowl for 40 litres capacity - Tank car included - Kettle included - Including 1 whisk and 1 flat beater - Cover / protective cover made of plastic - Lever for raising and lowering the mixing bowl - Stepless speed adjustment - El. Connection: 380 V, 50 Hz, 3 Ph, 1.1 kW, 3.0 A - Dimensions: W 570 x D 912 x H 1,210 mm - Weight: approx. 180 kg Volume specifications of various products: - Egg whites (1l = 30 eggs): whisk, 6 litres - Cream: Beater, 18 liters - Mayonnaise: Beater, 12 litres - Mashed potatoes: whisk, 24 kg - Bisquick base: whisk, 16-20 kg - Bread dough 50%: dough hook, 18 kg - Sand cake: Stirrer, 24 kg The machine has been completely checked and is in very ...

Type: 604-518 Serial number: 120002743-10 Year of construction: 2018 Drum: 1.3 mm Compressed air: 6 Bar, 50 l/min Power: 3 x 415V, 50Hz, 8.5kW Dimensions: 1500 x 1700 x 2400 mm Weight: 1460 kg Working hours: 1465 hours With hopper and tamping device

• s/s-style, adjusted for filling and closing of vials/bottles • 2 filling stations for steady objects, object-dia for round objects 16-100 mm, for flat objects 16x16 - 100x100 mm, h 35-310 mm, according to change parts • Output max. 3,000 objects/h according to product • Filling area 0.3-540 ml/bottle according to pumps, with 2 one after the other installed s/s-rotary piston pumps each 2 pumps each 8 - 50 ml • Single filling (max. 50 ml) and step filling (max. 100 ml) possible with existing pumps • Drip retraction • 1 Hand-over station for screw caps dia 22,0 x 20,5 mm with screwing tool and sorting bowl • Change parts for bottle-dia 24,2 x H 63,7 mm, dia 28,6 x H 71,5 mm, dia 37,7 x H 92 mm • 2 sets dosing needles, each 2 pcs, several dia • PLC Klöckner Möller PS4-201-MM1, touchscreen • Eectr. connection 220/380V/50Hz

The BA150E is a 6-inch mobile wastewater pump suitable for pumping contaminated water with particles up to 80 mm in diameter., This centrifugal pump is equipped with its own vacuum system and is therefore dry self-priming., Mounted on a fully hot-dip galvanized, stackable frame., , Drive: Electric motor, Discharge x suction: 6 x 6, Max. capacity: 430 m³/h, Max. delivery head: 24 mwc, Free passage: 80 mm, Vacuum system: MP50 (50 m³/h), Version: Dry self-priming, Motor: 22 kW, Poles: 4, Frequency: 50 Hz, Starting method: Soft starter, Voltage: 400/690V, , Do you have any questions? Please contact us for a personal consultation., , Throughput capacity: 400 m3/h, Max dirt passage: 80 mm, Motor brand: Hansa-Motoren, Max. head: 24 MWK, Weight: 1250 kg, , = More information =, , Year of manufacture: 2014, Applicable material: Water, Empty weight: 950 kg, Connector size: 6 Inch, Cargo space ca ...

Additional independent injection unit with its own supply and control system

TECHNICAL DATA: Piston compressor Installed power: 2 hp Maximum pressure: 10 bar Working pressure: 8 bar Capacity: 100 liters Voltage: 230 V

power capacity: 1,5 kW volt: 380 V ampere: 5,75 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mm Working height: 220 mm Motor output: 4 kW Length of the planing table: 2100 mm Number of knives: 2 St. Feed speed: m/min. Dust suction hood: mm Dimensions (L/W/H): mm machine weight ab.: 1200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 1,1 kW volt: 380 V ampere: 2,8 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade width max.: 120 mm Weight: 350 kg Motor output: 1,3 kW WINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB PNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness. Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding. Technical specifications: - Band Saw Width 15-120mm - Tooth pitch Max. 60mm Tooth depth 0-30mm - Tooth forms PV,NV,KV,PU,NU - Hook angle -10° to +30° - Feeding rate 0-90 teeth/min. - Motor quantity 2 - Grinding wheel motor – 1.1kW, 1400 r.p.m. - Gearbox motor double-rev. – 0.55kW, 1400 r.p.m - Grinding wheel diameter Ø250mm - Grinding wheel bore diameter Ø20mm - Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch) - Operating voltage 400V, 3Ph, 50-60Hz - Total power ~1,3kW - Dimensions 80120175cm - Net/gross we ...

power capacity: 2,2 kW volt: 380 V ampere: 5,3 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details.

2-position pneumatic piston filling machine as an add-on dispenser, Filling volume: up to 250 ml, Output: up to 2,000 containers per hour, Frame: stainless steel, Dimensions: approx. L x W x H = 1,200 x 1,000 x 1,400 mm, Connection value: 380Vac, 50Hz,, Compressed air > 6 bar, Miscellaneous: bottle stop with positioning device (the bottle is filled in 2 stages), Stainless steel control cabinet, Storage tank with V2A lid and agitator, the system was overhauled in 2014 by Lenssen in Holland and equipped with a new control system. It was used to fill glass bottles with salad dressing., filling volume: up to 250ml, Filling volume: up to 250ml, a slight vacuum is drawn and the pouch sealed.: up to 250ml

VWS Nederland – Top/Base Labeling Machine (R → L), Manufacturer: VWS Nederland, Type: Top / Base Labeling Machine (Right → Left), Year of manufacture: 2017, Description, The VWS Nederland Top/Base Labeling Machine is designed for automatic labeling of products on both the top and bottom sides. The system operates from right to left (R → L) and is suitable for integration into automated packaging and production lines., This labeling system is commonly used in the food, pharmaceutical, and consumer goods industries where accurate and consistent label placement is required., Technical Specifications, - Manufacturer: VWS Nederland, - Machine type: Top and bottom labeling machine, - Labeling direction: Right → Left (R → L), - Label positions: Top and base (bottom), - Year of manufacture: 2017, - Application: Automatic labeling of trays, containers, and packaged products, - Integra ...

Cherry stoner, make Baskaya, model BM - CC-IA, year 2020, The machine removes stones from cherries without destroying their natural shape., Plunger stoner, compatible with the FERRUM stoner., Output: approx. 800 - 1,400 kg/h depending on product quality and calibration., Version: stainless steel,, Dimensions: L x W x H: approx. 3,500 x 1,300 x 2,000 mm,, weight: 1,250 kg,, electr. Connected load: 4 kW.

Bäuerle pull saw with support table left/right and stop. 400mm circular saw blade Cutting depth approx. 450mm Year of construction unknown 3KW

Item condition: in working order Availability: as of now Year of construction: 1999 Year of construction Eberhardt: 2013 Technical data: Output adjustable: 4 rows up to 3600 pieces/h, 80-160gr. 5-row up to 4500 pieces/h, 40-90gr. 6 rows up to 5400 pieces/h, 40-90gr. Connected load: 1.87 kW, 2.1 kVA Performance and weight ranges are indicative. Depending on the dough and proofing, the values may vary. Dimensions in mm Stuppling system Cutting machine A 1020 1215 B 890 890 C 1600 1600 D 1700 1700 E 2720 2420 F 2810 2730 Pre-proofing zone, plunger station and automatic stacker in one compact unit: After rounding, the dough pieces are automatically placed in the robust pre-proofing hanger. A ...

CLOSING MACHINE BAUSCH+STROBEL KS-1025 Fully automatic intermittent-motion closing machine/crimper for vials and cylindrical glass, plastic or metal containers with up to two different types of closure. Includes separate electrical panel (300 kg, 800 x 600 x 2100 mm). Built in 1996. PRODUCTION - Output: up to 4200 units/h - Processable types of closure: rubber stoppers; droppers; screw caps; pilfer-proof caps and crimp caps; special closures with pipettes; pump spray assemblies; child-proof closures DIMENSIONS - Size (mm): 2200 x 1600 x 1800 ca. - Weight (kg): 1500 ca.

An ultrasonic cutting machine is offered. 180mm full-wave titanium blade, cutting shapes: rectangular, triangular, diamond-shaped, round products, sheet dimensions X/Y: min. 300mm/200mm max. 600mm/400mm, round products: min. 220mm max. 260mm, cutting height max.: 120mm, production capacity: approx. 120sheets/h, integrated cleaning station and drying function. Inspection possible by appointment.

This 6-axis BACCI TWIN CNC Wood Machining Centre was manufactured in 2001. It features an impressive X-axis travel of 3400 mm, Y-axis travel of 1500 mm, and Z-axis travel of 1000 mm. The machine is equipped with 4 milling heads that can reach speeds of up to 24,000 rpm and includes 2 tables and 2 vacuum units. If you are looking to get high-quality wood machining capabilities, consider the BACCI TWIN machine we have for sale. Contact us for further details.

A complete cut-off grinding system is available. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking device. 4) Bar rotating drive and measuring station. 5) Weighing station with section sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic power unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible.

2002 Fold length: max. 36 cm; min. 5 cm Paper weight: 40 - 250 g/m² Power supply: 230 V / 10 A Underfloor vacuum feeder PBA with integrated alignment table 2 pockets Total counter Control panel Double sheet control Size: max. 35 x 45 cm min. 8.5 x 12 cm In production Located: Germany Available: immediately

This machine is a batch butter churn which produces butter from cream obtained in a previous process from raw milk by separation. The cream is beaten and pushed in a rotating cylinder, forming butter granules which separate from the buttermilk during the process. The buttermilk is continuously skimmed until pure butter remains as the final product. Total volume: 550 liter - cream in max: 275 liter - output butter: 137,5 kg per batch. Manhole on the side for filling / emptying. Motor: 2,8 kW - 1.460 rpm - 380 V - 50 Hz. New simple control panel with frequency converter for speed adjustment by simple button click, forward/reverse switch, emergency stop and main switch., Type of Machine: Butter Churn, Volume: 550 liter, Capacity of butter: ± 137,5 kg/batch, Diameter of the drum: 85 cm, Length of the drum: 100 cm, Motor: 2,8 kW - 1.460 rpm - 380 V - 50 Hz, Year of Major Service: 2024, Opera ...

Glass Bottle Filling Line, 3000 bph, with Markl Bavaria Counter Pressure Filler This complete bottling line was delivered by the German manufacturer Markl Brauereimaschinen in 2015 and is still in operation. The line consists of a semi-automatic bottle off-loading system, where new bottles are lifted layer-by-layer from pallets onto the feeding table. It also includes a VELA CW 30 linear labelling machine for self-adhesive, single roll-fed labels. The filling system is a Markl Bavaria type 12/3 VKL 12 counter-pressure filler equipped with 12 filling valves, a single air pre-evacuation system with CO₂, a rotating filler, and a 3-head crown capper. The highly efficient pre-evacuation vacuum is vented directly from the center of the bottles. Pressurizing CO₂ gas is introduced at the bottom of the bottle—precisely where the beverage flows smoothly into the container. The CO₂ cush ...

Embossing force: 40kN Heater: 2280 Watt with cabinet - ideal embossing press suitable for book cover, die-cuts from leather, imitation leather and cloth, as well carton and und carrier bags, flat plastic parts - embossing surface 15 x 21 cm - autom. foil feed

Overview The Kosme / Krones Barifill is an isobaric filler that is currently in operation in a German brewery and can be seen in operation. The machine was manufactured by Kosme in 2015 and installed in 2016. It has a maximum output of 8,000 bottles per hour and the rated speed of the manufacturer is 7,000 bph. The system is designed for 26 mm crown corks and has 30 filling stations. Technical details  Output: 8,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0,5 NRW 0,5 Longneck 0,5 Lochmund 0,33 ALE 0,33 SUD 0,33 Steinie Bügel Filling stations: 30 Electrical specifications: Max. Voltage: 3x400 V + N + GND 50Hz Power consumption: 13,00 kW Operating hours: 18393 (March 2025) Spare parts included: Drives Gearboxes Cardan Shaft others Serviced by Kosme/Krones each year Lifting cylinders in 2024 Valves and capper in 2025 Features: Bottle shower High pr ...

An HD piston compressor Bauer is available. Capacity: 800l/min, max. operating overpressure: 160bar, max. operating pressure: 2320psig, power: 18.5kW, speed: 1180rpm. Machine dimensions X/Y/Z: approx. 2200mm/1100mm/1450mm, weight: approx. 750kg. An on-site inspection is possible.

Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible.

General SKU431X1350 LocationBarneveld CEcheck MakeGeppert Band Conveying Systems Main Features Motor0.25 KW Length3800 mm Width140 mm Specified Features - Conveyor belt MaterialPlastic, Stainless steel Conveyor beltcheck Elevator beltcheck Belt width140 mm Belt length3800 mm With carrierscheck Carrier height100 mm With motor0,25 kW, 219-241/380-420 volt, (Ex) Belt speed137 rpm Outlet height1300 mm Information TypeGES-50-K-W Mach.No.1509113 Year of construction2015 Mounted on framecheck Inclined on framecheck Floorspace3,20 x 0,80 m Total height2,20 mConveyor beltsGeppert-Band GmbHConveying systems > Conveyor beltsBrand > Geppert-Band GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

Used Fat Baking Equipment Fat Baking Equipment GTHdescriptionManufacturer: GTHTtype: EB-KGead class 11/90 Watt 1100with a trolley and tilting floorboardsAll details and dimensions are on the photoswith hood and side tableDetails see pictures.

Bread roll system Stainless steel clad digital control consisting of: Head machine type K5 Weight range up to 110gr Settling device with long-rolling station Trigger length adjustable 60/40 to 60/100cm mobile - Bakery condition/not cleaned

Pull-off trolley for 240cm deep pull-offs NEUWagen profile 40x40mm screwedExternal dimensions: W: 251cm D: 64cm H: 190cmInternal dimensions: W: 243cm D: 64cmSee pictureWe have various large pullers and pull-off trolleys in stockDetails see pictures

Scraper for 194cm deep pullers NEUWagen profile 40x40mm screwedExternal dimensions: W: 207cm D: 64cm H: 180/190cm10 supportsInterior dimensions: W: 197cm D: 64cmSee pictureWe have various large pullers and pullers in stockDetails see pictures

Manufacturer: Harald Baumgarten/Sema Systemtechnik Model: TM 400S Year of Manufacture: 2014/2015 Type of Machine : Angle Grinding System The system consists of the following components: - Cut-off grinding machine type TM 400 S with bundle loader (manufacturer Sema Systemtechnik, - rod breaking device, - Rod rotary drive / measuring station - Weighing station with section sorting, - Extraction and filtration system, - Soundproof booth (manufacturer: HüWa Schallschutz und Anlagenbau) and protective fencing - Four-column press (Manufacturer: Winter Presses) - Hydraulic power unit with hydraulic pumps - Control cabinet and control panel Find more here - / Contact us at -

Puller for 200cm deep pullers NEUWagen profile 40x40mm screwedExternal dimensions: W: 213cm D: 64cm H: 180/190cmInterior dimensions: W: 203cm D: 64cmSee pictureDo we have various large pullers and pullers in stockDetails see pictures

Key data: 800 mm, 900 mm, 650 mm

Double-spindle machining center with swivel beam for mounting tension bridges Spindle spacing 800 mm Spindle speed up to 12,500 1/min Power 10% - 40% - 100% ED = 42 / 35 / 28 KW Torque 10% - 40% - 100% ED = 200/ 165/ 135 Nm Tool changer 2 x 42 tool positions Tool holder HSK 80 Rapid traverse 120 m/min - CNC control Siemens 840 Dsl - Central coolant facility

Oven Heating Elements / Heating Rods for Quail Piccolo 4 PiecesTubular Radiator with Stainless Steel JacketPower: 250W Voltage: 230V Ear Mantle Material: 1.4828 / AISI 309Bent: U-ShapeTotal Length: 78cmHeatable: 61cmUnheatable: 17cmHole Spacing: 7.5cmDetails see pictures

Support machine with stackerManufacturer: BMTEC GmbHTyp: Care unit stackerYear of construction: 20093x400V 1kWThe condition: Defect must be completely checkedDetails see pictures.

Oven Heating Elements / Heating Rods for Quail Piccolo 4 PiecesTubular Radiator with Stainless Steel JacketPower: 320WSpanning: 230VRear Sheath Material: 1.4828 / AISI 309Bent: U-ShapeTotal Length: 78cmHeatable: 61cmUnheatable: 17cmHole Spacing: 7.5cmDetails see pictures

Puller Wipes 3920x560mm NEW6 EyeletsWe have different large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase, an exchange or return is excluded it is only for tradespeople.

Heating Elements / Heating Elements for Jufeba Pretzel Baking Machine LN-2Above price for 6 pieces Tubular Radiator with Stainless Steel JacketPower: 1200WSvoltage: 230Vgestr. Length: 1410mm (±2%)of which unheated: 2 x 30mmTube diameter: 8.5mmSurface loading: approx. 3.4W/cm²Tube jacket material: 1.4828 / AISI 309Connection: Thread M4Closure: Silicone curved: U-shapewith connection plate 50x20mmDetails see pictures.Payment: Bank transfer or cashOur opening hours: only by appointmentThe telephone Availability is only possible Monday to Friday from 08:00 to 17:00. Shipping and

Heating Elements / Heating Elements for Jufeba Pretzel Baking Machine LN-2Above price for 2 pieces Tube Heater with Stainless Steel JacketPower: 1200WSpan: 230Vgestr. Length: 1410mm (±2%)of which unheated: 2 x 30mmTube diameter: 8.5mmSurface loading: approx. 3.4W/cm²Tube shell material: 1.4828 / AISI 309Connection: Thread M4Closure: Silicone bent: U-shapewith connection plate 50x20mmDetails see pictures.Payment: Bank transfer or cashOur opening hours: only by appointmentThe telephone Availability is only possible Monday to Friday from 08:00 to 17:00. Shipping and

Puller Cloths 2100x560mm NEW( 4 Pieces )Puller Cloths 2100x560mm NEWProductor Dimensions : W: 2100mm T: 560mm5 EyeletsWe have various large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase an exchange or return is excluded it is only for tradespeople.

Used Printing Board For Bread / RollsDescriptionManufacturer: bmTECTyp: Printing BoardYear of Construction : 2021See pictures for details.

Shop Baking Oven  Wiesheu Bundle Baking Station E3 NEW / Unused NEW / UnusedManufacturer : WiesheuType : Bundle Baking Station E3Year of construction: 2024-09Door hinge: rightDuring transport there is some damage ( see photo )for baking tray size /cm 60x40 cmUpper oven 5 trays lower oven 10 trays For rack trolley / without rack trolleyE3 Maximum baking capacity â€" More space for more salesUniform baking quality with optimised energy balanceEasy operationIntelligent and functional designFlexible Door hinge left or rightThe E3 convinces with a perfectly matched fan

Pull-off trolley for 80cm deep pull-offs NEWagen profile 40x40mm screwedOuter dimensions: W: 126cm D: 64cm H: 184cm10 CushionsInterior dimensions: W: 118cm D: 64cmThe trolley is suitable for 80cm deep and 60cm wide ovenSee pictureWe have various large pullers and pull-offs in stockDetails see pictures