bar mill used for sale

This 5-axis MECOF DYNAMILL 3000L was manufactured in 1999. It features an impressive X-axis travel of 5,500 mm, Y-axis travel of 3,000 mm, and Z-axis travel of 1,500 mm. The machine is equipped with a powerful spindle taper of ISO 50 and a tool magazine capacity of 24 tools. If you are looking to get high-quality milling capabilities, consider the MECOF DYNAMILL 3000L gantry milling machine we have for sale. Contact us for further details.

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

This 3-axis Vision Wide Vision gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,530 mm, and Z-axis travel of 750 mm. The spacious work table size of 2,000 × 1,530 mm makes it ideal for large, flat workpieces. If you are looking to get high-quality milling capabilities, consider the Vision Wide Vision gantry milling machine we have for sale. Contact us for further details.

A universal tool milling machine by Friedrich Deckel, overhauled in 2008 and originally built in 1989, is available. Travels X/Y/Z: 560mm/500mm/450mm, table dimensions X/Y: 900mm/530mm, max. table load: 450kg, tool taper: SK40, quill stroke: 80mm, milling head swivel: +/-90°, spindle speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible.

Kunzmann WF4/3 - Universal milling machine - Heidenhain position display - Stepless feed in all axes - Rapid traverses in all axes - Hydraulic tightening system - Rigid angle table - Electrical central lubrication - Coolant device - Workplace lighting - Machine feet - Year of construction 1995 Specifications - Mount: SK40 - Speed range (infinitely variable): 40 - 2550 rpm - Travel X/Y/Z: 400 / 320 / 400 mm - Feed X/Y/Z: 0 - 2000 mm/min - Quill stroke vertical: 60 mm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1500 kg

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

x-travel: 1400 mm y-travel: 630 mm z-travel: 600 mm Control: Heidenhain total power requirement: 15 kW weight of the machine ca.: 5,85 t dimensions of the machine ca.: 1800x630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

This 3-axis HARTFORD Infinity HSA-2215AD gantry milling machine was manufactured in 2007. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 780 mm. The machine includes a robust table size of 2,200 x 1,400 mm and a maximum table load of 6,000 kg. If you are looking to get high-quality milling capabilities, consider the HARTFORD Infinity HSA-2215AD machine we have for sale. Contact us for further details.

End mill, roller cutter, milling cutter, disc cutter, slot cutter -Manufacturer: Fette, roller end mills, disc cutters -Type: A175x20N -Hole: Ø 40 mm -Dimensions: Ø 166 x 18 mm -Weight: 2.5 kg

Ex-Cell-O XG620, Excello XG 620, Siemens CNC overhauled 2011, docs available, ball groove milling for CV constant velocity joints - homokinetic joints, This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Available 3/2027 after medium overhaul Siemens S840 DISO 502-axis head K4,000 rpm1,000 Nm30 kW2,000 x 8,000 mm7,000 mm2,800 mm1,100 mm2,550 mm40 tools

Key data: 600 mm, 525 mm, 200 mm

Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial no.023 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial.no.063 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 710 mm, 520 mm, 520 mm

TECHNICAL DETAILS X-axis travel:710 mm Y-axis travel:520 mm Z-axis travel:520 mm Rapid traverse X-axis:30 m/min Y-axis rapid traverse:30 m/min Rapid traverse Z-axis:30 m/min X-axis feed speed:10 m/min Y-axis feed speed:10 m/min Z-axis feed speed:10 m/min Overall height:3,300 mm Overall length:4,600 mm Overall width:5,500 mm Total weight:6,000 kg Spindle speed (min.):20 rpm Spindle speed (max.):12,000 rpm Spindle motor power:25,000 W Input voltage:400 V Type of input current:three-phase Work table length:700 mm Worktable width:500 mm

Surface reference plates, roughness measures MASSI end milling machines TGL 4763 Rz 6.3 μm - Rz 80 μm in wooden box used, tested ! Dimensions: 345 x 125 x 35 mm

Milling head PAGUS Outer Ø thread: 41.8 mm square 10 x 10 mm used, tested ! Dimensions: 250 x 200 x 400 mm

X-axis: 660mm, y-axis: 350mm, z-axis: 450mm, table clamping surface dimensions: 762x356mm, speed: 10-10,000/min, tool holder: SK 40 DIN 69871, number of tool changer stations: 20, rapid traverse: 28m/min, control: ULTIMAX 4, length: 2000mm, width: 1800mm, height: 2660mm, weight: 2.9t, with documentation, documents, hydraulic diagram and electrical circuit diagram. An on-site inspection is possible.

Tool holder, milling holder, milling tool, long milling arbor, attachment holder, cutter head holder, cutter head holder -Milling chuck: SK40 chuck, 3 pieces -Type: 40x16x63 TGL 30 1359 -Hole: Ø 16 mm -Dimensions: 203/60/55 mm -Weight: 1.2 kg

High-Energy Ball Mill for Sale Zoz Simoloyer® CM100b with Auto-Batch System AB100 Industrial High-Energy Milling System – Like New – Immediately Available Overview: This offer comprises a Zoz Simoloyer® CM100b Semi-Turnkey System, manufactured in 2013, complete with the Auto-Batch System AB100 and a completely modernized electronic control system. The complete installation has accumulated only one hour of operating time (commissioning and demonstration only) and is therefore in mint, like-new condition. The system represents a rare opportunity to acquire a fully automated high-energy milling solution without the long lead times associated with new equipment. Designed for demanding research and industrial production environments, the system is ideally suited for the processing of advanced materials, nanostructured powders, oxide dispersion strengthened (ODS) alloys, batter ...

Milling machine, water slot milling machine, window production machine PERTICI UNIVER ML142 year: 1995 x, y, z- travel: 100 mm milling depth: 0 - 50 mm Operating voltage: 380 V Power: 0.50 mmbr /br / 6 kW - pneumatic workpiece voltage - manual feeds used, tested ! Dimensions: 1600 x 1000 x 1300 mm

ACCTEK AKM2030 CNC router was built in 2020 in China by Jinan Acctek Machinery CO., Ltd. The machine is designed for the precise milling, cutting and engraving of parts made from materials such as wood, MDF and plastics. Its large work area, combined with a stable design, makes the machine ideal for both one-off projects and mass production. All machining processes are performed using a high-performance electro-spindle with a maximum speed of 24000 rpm. The rotational speed and torque are controlled by an inverter, allowing the operating parameters to be adjusted to suit the current task. The electro-spindle is also equipped with a cooling system, which helps maintain stable parameters during intensive use of the machine. Individual axes are driven by high-torque stepper motors. These move along precision linear guides, ensuring accurate positioning and repeatability of the parts p ...

A Caser-Saimp universal milling machine in need of repair but still operational is offered. Spindle taper: ISO 40, table size X/Y: approx. 1300mm/265mm, travel X/Y/Z: approx. 750mm/265mm/430mm, max. spindle speed: 1700rpm, spindle drive power: approx. 4kW. The X-axis can no longer be moved using the power feed. A servo motor was retrofitted to the X-axis (white assembly). Inspection possible by arrangement.

This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details.

Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Durchlauföfen Herdwagenöfen Kammeröfen Schachtöfen Schmelzöfen Industrieöfen gebraucht Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Härt en GlühenNormalisieren Weichglühen Isothermglühen Vergüten Anlassen Entspannen Hubschritt-Kettenförderofen Ringherdofen Kammerofen Durchstoßofen Drehherdofen Rollenherdofen Gußplattenbandofen Reinigungsanlagen

This 4-axis DMG Mori Seiki SL 2500 Y was manufactured in 2005. It features a maximum swing diameter of 755 mm and a machining diameter of 390 mm, with a maximum machining length of 655 mm. The machine includes a 12-station turret and a programmable hydraulic tailstock. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki SL 2500 Y turn-mill centre we have for sale. Contact us for further details.

This 6-axis Takisawa TS-4000YS was manufactured in 2021. It features a maximum swing diameter of Ø 600 mm and a turning diameter of Ø 370 mm with a length of 750 mm. The machine includes a powerful 22 kW main motor and a counter spindle with a speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-4000YS turn-mill centre we have for sale. Contact us for further details.

Used slow speed ball mill for the production of chocolate creams made by Techmasz model: WMK350. New 2019. The offer consists of: - 2x WMK350 ball mill - 2x chocolate pump with water jacket + piping - 1x DUO fat melting tank The slow-running ball mill was manufactured mainly for the food industry. Its technical parameters allow it to meet the high requirements of this industry. Technical data: - Mixer drive: Nord SK2282 VF - 112 MH/4 geared motor controlled by NORD inverter type SK500E-401-340 - Coupling type: Maintenance-free flexible torsion coupling size 75 with 92 Sh A coupling. - Agitator speed control: In the range 20-80 rpm - Noise level: Less than 85 dB(A) - Ball diameter/type: 13 mm/91 kg (approx. 10000 pcs.) - Usable volume of mixing chamber: Min. 11.50 l., Max. 342.00 l. The total capacity of the mixing chamber is 346 litres - The usable capacity of the m ...

Surface comparison plate set, roughness measures MASSI Planing, face milling, turning TGL 4763 Planing: Rz 6,Rz 3 μm - Rz 160 μm Face milling: Rz 6.3 μm - Rz 80 μm Turning: Rz 3.2 μm - Rz 80 μm in 3 wooden boxes used, tested ! Dimensions: 345 x 125 x 105 mm

This 6-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine.

This 3-axis MTE BF 4200 was manufactured in 2002. It features an impressive X-axis travel of 4,000 mm and Y-axis travel of 1,200 mm, with a robust table size of 4,200 × 1,000 mm and a maximum table load of 13,000 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 4200 bed type milling machine we have for sale. Contact us for further details.

This 3-axis MTE BF 2200 Bed Type Milling Machine was manufactured in 2004. It features a substantial X-axis travel of 2,000 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine includes a large table size of 2,200 × 1,000 mm and can handle a maximum table load of approximately 7,200 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 2200 machine we have for sale. Contact us for further details.

Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible.

Digital Display for Vertical Milling Machines ACU-RITE MillMate Dimensions: 280 x 175 x 160 mm

Travel X/Y/Z: 650mm/500mm/475mm, table dimensions X/Y: 1530mm/450mm, max. table load: 400kg, spindle taper: SK40, max. spindle speed: 4000rpm, spindle power: 7.5kW, milling head swivel range: 140°, control: Heidenhain TNC 620. Weight: approx. 2750kg, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2050mm. An on-site inspection is possible.

Manufacturer: MAKA Model: DC 7 D Year of Manufacture: 2016 Type of Machine: Milling machine Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 65 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MAKA Model: DC 7 D Year of Manufacture:2018 Type of Machine: Milling machine Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 65 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 5-axis Mazak INTEGREX 200-3 was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum turning length of 1045 mm. The machine is equipped with a main spindle speed of 5000 rpm and a milling spindle speed of up to 12000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX 200-3 machine we have for sale. Contact us for further details.

We are pleased to offer for sale a complete high-precision manufacturing cell designed for the production of long, helical and screw-profile components, including PCP and mud motor rotors, extruder and injection molding screws, compressor and pump spindles. The equipment includes: 1. 2008 LEISTRITZ PW190.8000.HP Peeling / Whirling — Fully Operational Capacity: 120 mm (4.72”) diameter × 8,000 mm (315”) length Machine weight: 92,594 lbs (42,000 kg) 2. 2011 LEISTRITZ LWN300 Milling / Hobbing — Fully Operational 3. 2009 LEISTRITZ PW300PM Milling / Hobbing — Not in Service 4. 2014 WEINGÄRTNER FINISH 450 Finishing / Polishing — Fully Operational This equipment forms a comprehensive production route covering roughing, profile machining, semi-finishing and final surface finishing of long, high-precision helical and screw-profile components. Typical applic ...

Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length : 60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Even larger MAHO or lids, ... Mounting plates: A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm Distance 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm Distance 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm Distance 90mm (3x) PRICE : € 180,-

This 5-axis DOOSAN DNM350/5AX was manufactured in 2017. It features a tool turret with 30 stations and utilizes BT40 tool holders. The machine is fully functional and has operated for 5500 hours. If you are looking to get high-quality milling and turning capabilities, consider the DOOSAN DNM350/5AX mill-turn centre we have for sale. Contact us for further details.

Milling cutter, H, schl. Zahnst. Group milling cutter FETTE K HSS E ( KHSSE ) Module 0.8 EW 20° DIN 3972 BP I

This 4-axis Biglia B.1200/S-Smart turn-mill centre was manufactured in 2009. It features a maximum turning length of 1500 mm and a Z-axis travel of 1500 mm. The machine is equipped with an HSK 63 spindle and has a tool capacity of 40 in the automatic tool changer. If you are looking to get high-quality turning and milling capabilities, consider the Biglia B.1200/S-Smart machine we have for sale. Contact us for further details.

End mills GEFRA u.a. HSS end mills 12 to 40 mm 43 pieces used, tested ! Dimensions: 400 x 200 x 100 mm

A - T-slot size: approx. 21.5mm, B-35, thread M20 16 T-slot nuts 20 pcs threaded rods M20, L-120 – 400mm 3 x 2 pcs clamping claws 4 nuts long, 6 nuts, washers 2 blocks for adjustment with adjustment screw 4 blocks 80 x 60 x40mm ( underlay ) Price : Euro 400,- ex works ! B - T-slot size : approx. 17, thread M16 20 T-slot nuts approx. 17, B-28-32mm 6 clamping claws 4 pcs. Threaded rods M16 – L110 AMF 12 winding rods L to 260mm 16 Pcs Nuts, Weight approx. 24Kg Price: Euro 150,- C - Clamping Set Clamping Clamps, Groove Width approx. 21.5mm W-36mm, M16 2 pcs. 0 – 25 – 70 , M16 with clamping claws 2 pcs. 100 – 220 , M16 with clamping p. 2 pcs. 200 – 320, M16 WITH clamping pr. 2 threaded rods M20 L-310 2 threaded rods M20 L 150 1 adjustment block, 4 nuts, 6 nuts Weight: approx. 30kg , Price : 360,- ex works ! D- groove width : approx. 28mm , W-4 ...

This 5-axis JOBS Jomach 241 gantry milling machine was manufactured in 1999. It features an impressive X-axis travel of 3,400 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 1,250 mm. The worktable size is 3,000 x 1,500 mm with a load capacity of 12,000 kg. If you are looking to get high-quality milling capabilities, consider the JOBS Jomach 241 machine we have for sale. Contact us for further details regarding this machine.

Travel X/Y/Z: 850mm/435mm/210mm, vertical head adjustment: approx. 590mm, table dimensions X/Y: approx. 1570mm/500mm, max. table load: 250kg, spindle taper: Fehlmann SF32, max. spindle speed: 7100rpm, spindle power: approx. 5kW, drilling capacity in steel: 30mm, tapping capacity in steel: M20, control: Mach3 with touchscreen PC, weight: approx. 3000kg. The machine was subsequently retrofitted with a Mach3 control. An on-site inspection is possible.

GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,82 x 4,16 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system ...

GeneralUniversal Milling Machines; Control: 3D-control Heidenhain TNC 620 Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 4,16 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system X,Y,ZDire ...