bar mill used for sale

GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.

General SKU214X079 MakeUnknown TypeUnknown No.Unknown Year of constructionUnknown LocationBarneveld Main Features Motor1.5 KW Width350 mm Specified Features - Mixing mill Motor1,5 kW, 380 volt, 1410 rpm Mill width350 mm Mill diametre110 mm With variator3-36 rpm With temperature control20-270°C Electrical heatingcheck With jacketcheck General With switchgearcheck Floorspace1,50x0,60 m Total height1,80 m Weight570 kg Extra SpecificationsTesting Roll mill, Roll diameter 110 mm, roll face width 350 mm, operating width 265 mm, nip width 0,1-5 mm&:nbsp:Mixing millsRubber-Plastic machinery > Mixing millsIndustries > Chemical > RubberBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

General SKU296U565 MakeWAB-Bachhofen LocationBarneveld TypeKD 45 Main Features MaterialStainless steel Volume45 Ltr. Motor33 KW Specified Features - Sand mill Horizontal sand millcheck Capacity45 Ltr. Housing dimensions Dia: 290x750 InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor33 kW, 380Volt,985rpm (EX) Rotor speed985rpm With ballscheck CapacityCap. range 180-1000 l/h With pumpPonndorf, PX15 Motorcheck Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) With jacketcheck General No.760735 Year of construction1976 With switchgear(as is) Floorspace1,4x1,0 m Total height1,8 m Weight1200 kg ATEX designedcheckPaints & coatingsStarchSand millsCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicWab BachofenIndustries > Chemical > Paints & coatin ...

General SKU296U567 MakeDYNO-MILL WAB Bachofen LocationBarneveld TypeKD 60 Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor45 KW Specified Features - Sand mill Horizontal sand millcheck Capacity60 Ltr. Housing dimensions Dia: 290x960mm InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor45 kW, 350/660Volt, 1475rpm Rotor speed900rpm Without ballscheck Capacitycap. range 200-1300 l/h With pumpcheck Motor0,37kW,230/400Volt, 1375rpm MaterialMild steel, stainless steel 1.4000 (aisi 429) With jacketcheck General No.910820 Year of construction1991 Floorspace2,1x1,3 m Total height1,8 m Weight1500 kgPaints & coatingsStarchSand millsCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicWab BachofenIndustries > Chemical > Paints & coatingsIndustries > Food & Feed >  ...

General SKU291Y514 MakeFryma TypeML180 Year of constructionunknown Main Features MaterialStainless steel Motor11 KW Inlet diameter30 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 180 x 28 mm Teethed rotorcheck With hoppercheck Inletø 30 mm Outlet200 x 60 mm Motor± 11 kW, (380 V) MaterialBrass, Stainless steel 1.4408 General LocationBarneveld Floorspace0,5 x 0,7 m Total height1,15 m Weight220 kg Extra SpecificationsThroughput range 1,000–12,000 L/hr.&:nbsp:Achievable particle size 0.5–5 mm.&:nbsp:Oils & fatPaints & coatingsColloid millsGeneric medicinesOintmentsBiotechnologyFeed additivesDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicFrymaIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsMills > Colloid millsIndustries > Pha ...

General SKU291Y527 LocationBarneveld MakeKarl Schnell Type062-F282-248 Motor Motor power21 kiloWatt Main Features MaterialAluminium/Stainless steel Motor21 KW Inlet diameter200 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 240 x 155 mm With hoppercheck Inletø 200 mm Outlet185 x 75 mm Motor21 kW (380 V, 2880 rpm) Speed2880 rpm Material1.0257 St 44.4, Stainless steel 1.4305 (303) General No.Unknown Year of constructionUnknown With switchgear(as is) Floorspace0,6 x 0,9 m Total height1,7 m Weight500 kgOils & fatPaints & coatingsColloid millsGeneric medicinesOintmentsBiotechnologyFeed additivesDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicKarl SchnellIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsMills > Colloid millsIndustrie ...

General SKU291Y475 MakeKarl Schnell Serial42942 Motor Motor power55 kiloWatt Main Features MaterialStainless steel Motor55 KW Inlet diameter165 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 220 x 50 mm With hoppercheck Inletø 165 mm Outletø 100 mm Motor55 kW (400 V 2880 rpm) Materialstainless steel 1.4006 (AISI 410) General Type080 F248 Mounted on framecheck LocationBarneveld Floorspace1,15 x 1,00 m Total height1,55 m Weight700 kg Extra SpecificationsWithout perforated disc.Oils & fatPaints & coatingsColloid millsGeneric medicinesOintmentsBiotechnologyFeed additivesDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicKarl SchnellIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsMills > Colloid millsIndustries > Pharmaceutical > Gen ...

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 5.750 Litre Measurement and Weight: Total Height: 4400 mm Tank Body Height: 3325 mm Diameter: 1600 mm Weight: 2110 kg Uni 3750 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure cooling jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Jacket and walls 9 mm. On cylindrical part of a cooling jacket as double jacket about 2.500 mm high. Container outside approx. 100 mm isolated, with screw stainless steel metal cover. Tank upp ...

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Orsta, universal unit -Motor: 1.1 kW/1410 rpm -Nominal pressure: 63 bar -Liter output: 6.3 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 380/750/H640 mm -Weight: 72 kg

Hydraulic pump, high-pressure pump -Max. pressure: 500 bar -Hydraulic connections: 7 -Pressure gauge up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, pressure gauge with glycerin filling, unused, original packaging -Type: RKG 63-3,r 0-100 bar G1/4 A -Quantity: 1x pressure gauge available -Cardboard dimensions: 95/95/H75 mm -Weight: 0.3 kg

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, Bourdon tube pressure gauge, unused, original packaging -Type: R 100-1 rFr 0-2.5 bar G1/2 A -Number: 2x pressure gauges available -Price: per piece -Cardboard dimensions: 140/135/H110 mm -Weight: 0.6 kg/pc.

Description Item #8768 – CHOCOLATE BAR WRAPPER Manufactured by SIG Model C

Qty. 1 Second-hand Shot-Blasting Line Mfc.: COGEIM – SAS Eng. Built: 2016 Dismantled and in storage Type: 4 Turbines Material to be processed: Bars’ length: min. 6.000 – Max. 12.000 mm Approximate work pieces dimensions and weight: Dimensions: round Ø 30 - 110 mm No. of simultaneously processed bars 7 up to Ø= 60 mm; 4 for bigger diameters

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer -Manufacturer: Timmer, Bourdon tube manometer -Type: M-SH-40-0/10-1/8-KU-bar/psi -Item No.: 18245004 -Screw connection: see photos -Number: 20x pressure gauges available Price: per piece / from 2 pieces €7,-/piece -Cardboard dimensions: 45/45/H45 mm -Weight: 0.1 kg/piece

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Wika, Bourdon tube pressure gauge, unused, original packaging -Type: 111.10.100 25 bar G1/2A -Item No.: 9021850 -Number: 14x pressure gauges available -Price: per piece -Cardboard dimensions: 145/105/H45 mm -Weight: 0.2 kg

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Wika, Bourdon tube pressure gauge, unused, original packaging -Type: 111.10.100 25 bar -Item No.: 9012605 -Screw connection: see photos -Number: 4x pressure gauges available -Price: per piece -Cardboard dimensions: 145/105/H35 mm -Weight: 0.2 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, pressure gauge with glycerin filling, unused, original packaging -Type: RKG 63-1,r 0-16 bar G1/4 A -Number: 7x pressure gauges available -Price: per piece -Cardboard dimensions: 95/95/H75 mm -Weight: 0.3 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, Bourdon tube pressure gauge with glycerin filling, unused, original packaging -Type: RChG 63-3, Rh 0-4 bar G1/4 A -Number: 4x pressure gauges available -Price: per piece -Cardboard dimensions: 95/95/H75 mm -Weight: 0.3 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, Bourdon tube pressure gauge, unused, original packaging -Type: RCh 100-3 rFr 0-1.6 bar G1/2 A -Number: 5x pressure gauges available -Price: per piece -Cardboard dimensions: 140/140/H105 mm -Weight: 0.8 kg/pc.

CHEAP EQUIPMENT, rock botton prices for owners retirement, send your enquiry for photos, consult PDF file for clear vision, availability: imediate

Glass Triblock KOSME Modell Barifill RFC Filling System: Short Tube Filling System with 60 filling valves, 50 rinsing stations and 10head aluminum screw capper Year of manufacturing: 2013 Capacity: 0,33 ltr. glass bottles - 20.000 bph 0,75 ltr. glass bottles - 16.000 bph Pitch: 113 mm Control system: Siemens S 7 The complete line was fully refurbished in December 2025. Available from November 2026

Description Item #8496 – CHOCOLATE BAR WRAPPER Manufactured by SAPAL Model BB, Foil Fed From reel, Label fed From Stack Each with Glue Unit, each with operating manual & electrical drawings set up to do 100gramme bars, measuring 157 x 78 x 8mms high

Description Item # 8568 – BAR FORMING MACHINE suitable for bars and centres such as caramel, fruit based, nougat, fudge, creams, marzipan, coconut, health bars, biscuits etc Manufactured by NID (Australia) Model BARFORMER Variable speed drive. The machine is currently set up for a 10 lanes x 25mm trapezoid shape strips/ropes Inlet unions, with overflow, for external hot or cold water are provided on the former and sheeter rollers. 450mm Wide Belt Production capacity of approx 270 Bars/minute based on a bar size 80mm long and up to 30mm thick and width of 25mm Cut off Length of the bar is instantly adjustable and can easily be set according to customer requirements. The NID Former continuously moulds ropes by passing the confectionery mass through the profiled grooves in the forming roller. The formed ropes are gently guided onto the belt conveyor to be cut to length by the guillotine.  ...

Description Item #8909 - CHOCOLATE BAR WRAPPER Manufactured by SAPAL Model BB, Nominal capacity up to 160 bars per minute on plain bars. Set up for a 100g bar, measuring 125mms long x 77mms wide x 12mms high. Could also wrap an 80g bar of the same size smaller height (less chocolate filling in mould). Foil & Paper fed from reel. With NORDSON Series 3100 Glue Unit. 380Volts, 50hz.

Description Item #8941 – CHOCOLATE BAR WRAPPER Manufactured by SIG Model DST Currently set up for a 68/70gramme filled bar Measuring 130mms long x 37mms wide x 16mms high Foil & Label both fed from a reel Heat Seal Foil, Glue Seal Label up to 150 bars per minute With NORDSON Glue Unit, With SIEMENS Simatic HML PLC Controls

Description Item #9016 - CHOCOLATE BAR WRAPPER Manufactured by SAPAL Model TD Was wrapping a 100gramme bar, measuring 157 x 75 x 8mm Depending on bar type, speed is up to 120 per minute 2-Stage Wrapping Foil From Reel, Label From Stack9016 -

Description Item #9056 - CHOCOLATE BAR WRAPPER Manufactured by SIG Model DSN, Was doing a Foil and Label from stack, or Foil & Cardboard Outer Wrap (parts included are for foil/cardboard outer). Foil fed from reel, label or cardboard outer from a stack. Foil is also heat sealed before outer wrap of label or cardboard. nominal capacity at around 120/130 bars per minute. Including a ROBOTECH Concept B5/2 Glue unit for the outer label or cardboard, Machine includes parts for 100grammes Foil & Cardboard Outer Bar parts. 100g bar dimensions : Length 188 x width 96 x height +/-6mm depending inclusions Machine is mounted on an Air Cushion Transport System Optionally available for an extra price parts for 150/180/200grammes Foil & Label Bars. Dimensions: Length 188 x width 96 x height 10.85mm (Height depending on the weight, but format parts are the same for 150 – 180 and 200g)

Description Item # 9233 - CHOCOLATE BAR WRAPPER Manufactured by NAGEMA Model EB1 The machine can pack filled bars, solid bars and bars with inclusions. overhauled by Schokoma in 2024 Currently set for a 200g tablet (Dubai tablet) 1st format 200g: Length: 161mm Width: 78mm Height: 15mm 2nd format 100g: Length: 147mm Width: 70mm Height: 7mm foil from reel label from stack cold glue seal for labels Output approx. 60-80 tablets per minute

Description Item # 9319 - BAR FORMING/EXTRUDING ROLLERS Manufactured by LEKOS (Slovakia) Model EXT-1020 Year 2016 1000mms working width SIEMENS Simatic HMI Plc Controls Set of Three (3) Forming Rollers (vertically stacked) Previously being used for Nougat Mass, Caramel, Syrup Layer Including Supporting Frame, Extruding Rollers, Cooling/Heating of the Rollers, Height adjustment of the top & middle roller, Mass Scrapping Mechanism, Mass Greasing Mechanism, Extruder Mass Storage Top Roller with 440mms diameter, Other Two Rollers with 630mms diameter Top Two Rollers can be adjusted, Bottom Roller is fixed Product thickness can be adjusted from 0 up to 30mms thick With Cold water Glycol Cooling Unit, to cool the rollers Still set up in the factory but no longer in production overall dimensions: 2851mm high x 1490mm deep x 2630mm wide weight: 3100kg

Description Item # 9357 - BEAN TO BAR CHOCOLATE LINE Manufactured by SELMI Year 2021 Including : ROASTER 106, 6Kgs capacity, 3Phase, 380Volts, 50hz WINNOWER, Single Phase, 220Volts, 50Hz GRINDER PLUS, 15Kgs Vat capacity MICRON BALL MILL, 3Phase, 400Volts, 50Hz VIBRO SIEVE, Single Phase, 220Volts, 50Hz CONCHA 60, Single Phase, 220Volts, 50Hz

Description Item # 9363 - CLUSTER FORMER / CEREAL BAR FORMER Compact system for shaping cereal mixes in any shape. The moulding system designed for processing and moulding cereal masses Not only rectangular products can be formed, but e.g. domes, triangles, bars etc. Manufactured by WOLF Spezialmaschinen Model: WCF 200 200mm working width Working capacity depends on the weight of the product. It can be 50 kg per hour. Year of manufacture 10/2023 3 formers. 1 is with 5 buttons, 1 is with 6 buttons in a row, 1 is for bars 2 in a row. 400V/230 V/ 50 HZ

Features Volume 6000 L Material No. V2A Operating pressure 8 bar Total height 1600 mm Cylinder height 1300 mm Outer diameter 1400 mm Depth 4600 mm Description Tank crest: Flange connection for pressure fitting with piping pulled forward Front: Clapper bottom Pressure fitting Flanges with sample tap Manhole 410 x 320 Clarification drain with pressure fitting Franz Vogel Rear: Clapper bottom Underbody: Residual drain pipe with angled seat valve DN50 2 bearing cups

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Cross milling machine Bartezaghi 2BE 250 Spindle length 240 mm Maximum milling height 250 mm Spindle diameter 40 mm Spindle speed 5600 RPM 9kw motor Pneumatic material pressure Desktop control

VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg G & BAR-BV-1 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78

Oven wild Barfield Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts

Board repair line with double end profiling line in top condition Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg < Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: Feeding station with feeding rollers, Automatic vacuum lifting table for lengths up to 6 m Conveyor systems Repair line 1 Turning station Transfer service Repair line 2 automatic vacuum lifter for stacking (6m) Stacking roller conveyor Control cabinet with machine control Profilfraessanlage Stacking Tables; very well

Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts

Rotary Lathe with Staylog Bar and Longitudinal Cutting System

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

Sparkling Pressure Tank / Steel Pressure Tank Storage Tank / Pressure Tank with red food safe munkadur coating, HORIZONTAL with new KIESELMANN Sparkling pressure fitting Operating pressure 8 bar Volume: 5.000 Litres Measurement and Weight: Total Length: 2800 mm Cyl. Length: 2045 mm Diameter: 1600 mm Weight: approx. 1220 kg Operating pressure: 8 bar, Test pressure: 10,4 bar Operating temperature: -10+50°C Tank lining: EMS 277 Inspection book, Documentation available Tank-Description Container with torispherical bottoms. Bottoms 8 mm wall thickness, jacket wall thickness 8 mm. Top of the tank: • with 1 flange DN 25 Tank body: • with forward drawn manhole oval front 440 x 350 mm swiveling with holder • with new KIESELMANN Sparkling pressure fitting with manome ...

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank with red food safe munkadur coating with cooling jacket and with isolation With new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 8.000 Litre Measurement and Weight: Total Height: 4900 mm Tank Body Height: 3625 mm Diameter: 1900 mm Weight: 2100 kg Uni 4850 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Operating temperature: -10 +40 °C Year of construction: 2000 Lining: Akorrosit EL 15 p” On cylindrical part two cooling jacket, test pressure 2 bar, depressurizes, 5,8 m2 cooling surface Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms and jacket 8 mm wall thickness. Container outside completely isolated with ...

Sparkling Pressure Tank / Champagne cooling tank / Storage Tank/ Pressure Tank Overpressure 8 bar, STANDING With new KIESELMANN sparkling pressure fitting Volume: 10.000 Litres Measurement and Weight: Total Height: 3220 mm Cyl.Height. 2050 mm Diameter: 2200 mm Weight: approx. 2250 kg Uni 3950 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Operating temperature : 20°C Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms 12 mm wall thickness and jacket 10 mm wall thickness. Tank upper body: · filling connection DN 50 central in the top · 2 crane eyelets · Flange connection NW 40 · 1 Block flange NW 20 Tank front: · with manhole oval 450 x 350 mm swivelling with holder · with new KIESELMANN sparkling pressure fitting up to 10 bar with manometer, with overpressure s ...

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 11.500 Litre Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with scre ...

Horizontal pillow-pack packaging machine For the packaging of various products from A for Apple to Z like plums, the performance is dependent on the product and the cover material (foil) that are used to. Is the machine for packs of 20 to 50 wraps the minute set there are various special applications possible or additionally possible. Depending on customer request, the machine in a line can be built or supplied as a whole line. From the Eintaktung.Bis to the Pack in the box or E 2 box with Etieketierung and foreign body detection.

Barsso” vacuum tumbler Type 5 Bartumb NEW ! all stainless steel PLC control with 50 programs max. load : ± 500 kg adjustable speed from 0 up to 9 rpm with vacuum pump Büsch with water filter dimensions (l x w x h) : 2.550 x 1.300 x 1.650 mm

Korimat KA 160 autoclave, 240 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine at our facility in 56070 Koblenz, Germany.

Korimat KA 160 autoclave, 120 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine at our facility in 56070 Koblenz, Germany.

Cooling screw trough screw double-walled heated or coolable used Manufacturer: BARL Maschinenbau GmbH Type: KT0803F17T50 Built: 2015 Total dimensions of the trough screw approx. 9.5 x 1.3 x 1.6 m Trough length approx. 8000 mm Trough width outside approx. 450 mm Trough depth approx. 600 mm Conveyor length approx. 7000 mm partly double-walled and can be heated or cooled with water Steel screw with cooled shaft Spiral thickness approx. 8 mm Diameter approx. 400 mm Spiral height approx. 100 mm Slope approx. 160 mm Shaft approx. 200 mm geared motor 1.5 kW 6.8 rpm 220/380 V substructure Steel construction approx. 11 x 2.5 x 0.2 m Total dimensions: approx. 11 x 2.5 x 2 m Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.