127,851 used machines on RESALE, but how to find them? Machine Search
Semiautomatic band saw Starret ST-4040 with CE. Cutting capacity round: 280mm. Cutting capacity square: 280x280mm. Cutting capacity rectangle: 280x400mm. Angle cut: Yes. Cutting speed: 15 to 120m/min. Cutting tape: 3550x27x0,9mm. Power: 1,5Kw. Dimensions: 1150x1900x1700mm. Machine weight: 735Kgs. CE: Yes.
Edge banding machine Type: Top 2000 Manufacturer: Hebrock Year: 2007 Machine in good condition, fully functional, under power Find more here - / Contact us at -
Max. cutting length: 4,500 mm Max. saw blade diameter: 550 mm Automatic length positioning and angle adjustment via program control Motorized adjustment for swivelling on both sawing units, allowing angles between 45 and 90 degrees to be directly controlled New network-compatible control system in 2019 Minimum quantity spraying device Weight: approx. 2200 kg
Hot glue tub for edges application on both linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min Machine condition: unchecked. Approx. Transport dimension: LxWxH 2000 x 670 x 1260 mm; Approx. Weight: 470kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-393
Manufacturer: OTT Model: Strong Edge Year of Manufacture: 2020 Type of Machine : Edge banding machine Find more here - / Contact us at -
Serial number 4784, Wheels diameter 900 mm, Tilting table with dimensions 1250 x 1310 mm, Working height from the floor 950 mm, Maximum cutting width approx. 870 mm, Maximum cutting height approx. 500 mm, Tilting guide with dimensions 400 x 150 mm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-347
Table size: 600 mm x 605 Auction-ID: A7-45416-225
Bergschmid Band Saw Auction-ID: A7-45416-131
with length stop with 1 roller conveyor, 530 x 140 cm with 1 roller conveyor, 400 x 140 cm Roll width: each: 115 cm
Offer 26087 Technical data: - CNC control PS 210 for material replenishment machine, - Cutting speed, cutting pressure - Separate manual operation of all functions without CNC control - Saw blade dimensions 4150 x 27 x 0.9 mm - Cutting speed infinitely adjustable 15 - 105 m/min - Cutting pressure regulation infinitely variable 0.2 - 2.0 m/min - Cutting area - at 90° around 320 mm - Square flat 400 x 280 mm - at 45° around 200 mm - at 30° Re about 170 mm - Left + right mitre adjustable with digital display - min/max section length of the material replenishment machine - for single stroke 2 / 1005 mm - Total drive 400 V / 3.0 kW - Minimum quantity coolant spraying device pneumatically supported - Hydr. Saw Band Tension + Mot. Saw Blade Brush - 2 pieces of original roller conveyor 2000 mm - Space requirement approx. W 4200 x H 16 ...
Wooden band saw with extendable and swivel saw table Roller diameter 200 mm Cutting height 80 mm Cutting width 180 mm Motor power 350 W Table size mm Table tilt 45 degrees Saw blade length 1400 x 6.5 x 0.35 mm Condition: never used / new (5) Auction-ID: A1-45681-847
Belt width 150 mm Strap length 1220 mm Grinding wheel dimension 225 mm Work table: 150 x 400 mm Table adjustable up to 90 degrees Table surface 150 x 130 mm Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 35 kg Space requirement approx. 650 x 360 x 400 mm Condition: never used / new (5) Auction-ID: A1-45681-887
Belt width 100 mm Strap length 915 mm Grinding wheel dimensions 100 x 915 mm Work table: 225 x 155 mm Total power requirement 0.44 kW Machine weight approx. 0.018 t Space requirement approx. 0.56 x 0.26 x 0.3 m Condition: never used / new (5) Auction-ID: A1-45681-852
Wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a mitre guide and is supplied with a saw blade. Roll diameter 400 mm Cutting height 200 mm Cutting width 350 mm Motor power 1.5 kW Table size 400 x 500 mm Table tilt 45 degrees Saw blade length 2950 mm Auction-ID: A1-45681-829
roll diameter: 600 mm; cutting width: 580mm; table tilting: yes; belt speed: motor power: 2,2 kW; motor brake: yes / manual; suction connection: 100mm; machine length: 120mm; machine width: 800mm; machine hight: 2015mm; weight: 200kg;
Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...
Key data: 230 mm
suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece
Offer 26077 Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 1000 mm
Offered for sale: complete Kaltenbach profile processing line consisting of band saw and drilling rig, suitable for steel construction and serial processing of profiles. (VIDEO added!) Composition of the line • Bandsaw: Kaltenbach KBS 620 DG • Drilling unit: Kaltenbach KDE 603 (3-axis) • Steering system: Kaltenbach Profiline III • Including roller conveyors / transport system 13 meter inlet belt + 12 meter discharge belt (Total length approximately 35 meters). ⚙️ Technical features • Cutting capacity: up to approx. 620 mm • Miter saws possible (45° & 30°) • Drilling unit with 3 independent axes (X/Y/Z) - Electrical inspection required! • Suitable for H, I, U-profiles and tubes • CNC control (DSTV compatible) • Power supply: 3x 400V / 50 Hz ✅ Machine condition • Bandsaw: operational (video) • Roller conveyors / transport: operational ...
Cutting diameter 90°: Ø 305 mm Cutting range at 90 degrees: square: 360x305 mm Cutting range at 45 degrees: round: Ø 265 mm Cutting range at 45 degrees: flat: 265x305 mm Cutting range at 60 degrees: round: Ø 175 mm Cutting range at 60 degrees: flat: 175x305 mm Table height: 700 mm Saw blade dimensions : 3830x27x0.9 mm Belt speed: 16-100 m/min Dimensions LxWxH: 2300 x 1450 x 1650 mm Total power requirement: 380 V , 1.1 kW Machine weight approx.: 780 kg Cut area at 90° cow: Ø 305 mm Cut area at 90° weight: 360 x 305 mm Cut area in area at 45° round: Ø 265 mm Cut area in width at 45° angle: 265 x 305 mm Cut area in width at 60° cow: Ø 175 mm Cut area in width at 60° angle: 175 x 305 mm Rubber bands: 3830 x 27 x 0.9 mm Sägebandgeschwindigkeit: 16 - 100 m/min Spaces: 2300 x 1450 x 1650 mm Sägeantrieb: 380 V, 1.1 kW Weight ±: 780 kg Auction-ID: A1-41992-93
With saw band welding device Auction-ID: A1-45711-154
Serial Number: 44650046 Blade length: 4570 mm Cutting Capacity: Round material: ⌀ 406 mm Square Material: Width: 400 mm Height: 400 mm Max. loading capacity: Machine: 2500 kg Roller conveyor: 2000 kg/m Min. workpiece remaining length to ensure the clamping edge of 10 mm: 76 mm Min. workpiece residual length for no workpiece detection: 30 mm Saw blade dimensions: 41 x 1.3 x 4570 mm Velocities: 15 to 90 m per minute (50 Hz) 17 to 90 m per minute (60 Hz) Section length: 10 - 5040 mm (possible in steps of 0.1 mm) Single feed: 570 mm With technical documentation as shown in the pictures With additional roller conveyor Support length: approx. 2000 mm Total support length: approx. 5040 mm Auction-ID: A7-45758-40
HORIZONTAL BAND SAW KASTO SBL 280 U FROM 1996 - METALWORKING MACHINE - SERIAL NUMBER 6003102458 WITH DOCUMENTATION Auction-ID: A1-45663-3
Automatic sawing machine MEP 320 AXI, Information about technical data are not binding., Machine available subject to prior sale., Round cutting capacity: 260 mm, Rectangular cutting capacity: 320x000 mm, Blade dimension: 3150x27x0.9 mm, Band speed range: 20 - 100 m/1 (Stepless), Weight: 1.000 Kg
- Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-724
- Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-715
band width:1050 mm plate thickness:8 mm number of rolls:8 DECOILER:. - design : single coil :. - sheet width max:1050 mm - sheet width (min):150 mm - max. weight of coil:22 to - max. diameter of coil:2000 mm - min. internal diameter of coil:570 mm FEEDERS:. - feeder: type : roll feeder :. - sheet width max:1050 mm - sheet thickness max:150 mm LEVELER UNIT:. - sheet width max:1050 mm - sheet width (min):150 mm - sheet thickness max:8 mm - sheet thickness (min):2.5 mm - number of leveler rolls:8 - diameter of leveler rolls:96 mm - distance between leveler rolls:104 mm - diameter of feed rolls:160 mm - feed velocity min.:2 m/min - feed velocity max.:43.5 m/min ELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 Hz Technical description : Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of: - LAWECO COIL LOA ...
band width:2000 mm plate thickness:1.8 mm number of rolls:13 Controls:SIEMENS DECOILER:. - design : single coil :. - sheet width max:2000 mm - sheet width (min):400 mm - max. weight of coil:30 to - max. diameter of coil:2000 mm - min. internal diameter of coil:610 mm FEEDERS:. - sheet width max:2000 mm - sheet thickness max:2 mm - feeding step max.:4000 mm LEVELER UNIT:. - sheet width max:2000 mm - sheet width (min):400 mm - sheet thickness max:1.8 mm - sheet thickness (min):0.6 mm - number of leveler rolls:13 - diameter of leveler rolls:50 mm
roll diameter:420 mm throat:400 mm workpiece height:325 mm table surface area:615 x 615 mm table swivelabel +/-:10/45 ° table - inclinable:+/- 20 ° cutting speed:20 - 2500 m/min total power requirement:2 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,95 x 0,65 x 1,83 m
weight of the machine ca.:1750 kg sawing motor:2,2 kW total power requirement:5 kW cutting speed:17 - 90 m/min cutting diameter:320 mm cutting range max.:320 x 320 mm saw band length:4.930 x 34 x 1,1 mm feed length:max 9x 600 mm dimensions of the machine ca.:2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual,
cutting diameter:320 mm saw band length:3280 mm cutting width:320 320 mm total power requirement:3,8 kW weight of the machine ca.:1150 t - columm guidance - roll-conveyer 4000mm / 1000 mm lenght - cutting speed 15 - 105 m / min - mitre cutting up to 60°
Serial Number: 44650046 Blade length: 4570 mm Cutting Capacity: Round material: ⌀ 406 mm Square Material: Width: 400 mm Height: 400 mm Max. loading capacity: Machine: 2500 kg Roller conveyor: 2000 kg/m Min. workpiece remaining length to ensure the clamping edge of 10 mm: 76 mm Min. workpiece residual length for no workpiece detection: 30 mm Saw blade dimensions: 41 x 1.3 x 4570 mm Velocities: 15 to 90 m per minute (50 Hz) 17 to 90 m per minute (60 Hz) Section length: 10 - 5040 mm (possible in steps of 0.1 mm) Single feed: 570 mm With technical documentation as shown in the pictures With additional roller conveyor Support length: approx. 2000 mm Total support length: approx. 5040 mm
Cutting diameter 90°: Ø 305 mm Cutting range at 90 degrees: square: 360x305 mm Cutting range at 45 degrees: round: Ø 265 mm Cutting range at 45 degrees: flat: 265x305 mm Cutting range at 60 degrees: round: Ø 175 mm Cutting range at 60 degrees: flat: 175x305 mm Table height: 700 mm Saw blade dimensions : 3830x27x0.9 mm Belt speed: 16-100 m/min Dimensions LxWxH: 2300 x 1450 x 1650 mm Total power requirement: 380 V , 1.1 kW Machine weight approx.: 780 kg Cut area at 90° cow: Ø 305 mm Cut area at 90° weight: 360 x 305 mm Cut area in area at 45° round: Ø 265 mm Cut area in width at 45° angle: 265 x 305 mm Cut area in width at 60° cow: Ø 175 mm Cut area in width at 60° angle: 175 x 305 mm Rubber bands: 3830 x 27 x 0.9 mm Sägebandgeschwindigkeit: 16 - 100 m/min Spaces: 2300 x 1450 x 1650 mm Sägeantrieb: 380 V, 1.1 kW Weight ±: 780 kg
Additional title: Roboband / Logomatic, Capacity: 150 paletts / h, Power: 5,5 kW, Current: 10 A, Voltage: 400 Volt, Frequency: 50 Hz, Weight: 1700 kg
Contour edge banding & trimming machine Make: VITAP Type: SMART-3 New machine - With swivable trimming station - For straight and formed workpieces (convex and concave) - 1 glue spreading roller for 10-60 mm panel thickness - Guillotine to cut bands up to 3 mm thickness - edge 0,5-3mm 2 tape feeding speed (3 m/min or 7 m/min) -Glue pot 1kg capacity - Tape plate Ø=520mm Solid Phenolic table - Easy to clean - With no heat transmission - Electronic temperature control - Foot pedal command for the guillotine Tilting trimming unit - with 1 high frequency motor HP 0.75 (kw0,55) - 1 cutter Head with 2 knives r1mm/r2mm/r3mm - Support tape plate Ø 600 mm - Semi-automatic end-cutter with motor 0,5 kw and blade Ø=125 mm - Working table 400 x 300 mm. - CE standards. Optional available for an extra charge: - Cutter (without knives) - Set ...
Saw pulley diameter: 914 mm (34 ) Saw pulley width: 90 mm (3,5 ) Max. sawblade width: 90 mm (3,5 ) Sawblade length: 5384 to 5587 mm Max. cutting height under the guide: 406 mm Max. opening feed rolls to sawline: 228 mm. Max. opening fence to sawline: 228 mm. Main saw motor: 15 kW Feedmotor: 1,1 kW Tabel height from floor level (with pit): 812 mm Total height from floor level: 2184 mm.
Code: 0221 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Technical data: Diameter of flywheels mm 700 Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400
Used single-sided edge banding machine Brand: Homag Type: Profi KAL 330/ 9/A6/L Year of manufacture: 2011 Feed speed Infinitely adjustable 18-25 m/min Release agent spray unit top/bottom - To reduce surface contamination. Jointing unit KAL300/S2 - 2 motors, each 3 kW, Hz 9000 1/min - Motor shaft Ø 30x68 mm, KN - Electropneumatic control of both motors for joint milling. - Automatic adjustment of the joint milling cutter to the center of the workpiece. Melting unit with granulate container - Granulate container 12L - Level control of the melting quantity Lasertec activation unit standard - The gluing unit is designed so that it can be used with either EVA/PU adhesive or LaserTec. - Manual conversion from LaserTec to PU/EVA Magazine 1 roll - For solid edges, strip goods, and roll goods - Automatic strip separation via vacuum suction cup - 1 edge f ...
maximum number of results exceeded
please refine your search
250 € 
