banbury mixer used for sale

1 x Farrel model F80 banbury internal mixer, Serial number: 996006, Year of manufacture: 1999 (new), Chamber volume 80litre, With 4 wing ST rotors, pneumatic hopper, hydraulic drop door dicharge with Linear actuator and spade latch, FYH hydraulic dust stops, Unidrive gearbox, With 600 HP DC variable speed motor and drive/SCR controller, Complete with hydraulic unit, Lubrication system, 3 Zone TCU and Farrel series 2000 operator panel. High spec mixer (fully hard chrome plated chamber and rotors). Previously used for PVC.

1 x Farrel Pomini model F160 Banbury internal mixer, Original year of manufacture: 1980, but rebuilt in 2000 (very good condition), Chamber volume: 160L Net batch size: 120kg, With 2 wing type rotors, Rotor tips hard material coated and fully chrome plated Rotor speed max 50rpm, pneumatic hopper, hydraulic drop door, FYH dust seals, Unidrive gearbox, With 435kw DC variable speed motor and electrical controls (415V). Complete and in good condition.

Tangential Chamber volume 70 l, hydraulic drop door AC motor 320 kW / 380V / 50 Hz, 1483 RPM Year 1987 Previously used for PVC.

Meccanica model Italian 92-liter Banbury and Meccanica model Italian 80-liter Banbury.

Belt spiral mixer for powder and granules with hydraulic mast - 950mm diameter - Pneumatic outlet flap - approx. 120 litres filling volume - made of stainless steel - Drive power: 2.2 kW - 52 shaft revolutions per minute - Adjustable shaft speed - With hydraulic mast (0.55 kW)

Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.

Producer: Suhner Description: - Capacity- 2000l - Brand new microprocesor Mikster MCM 023 - Variable drum speed - Automatic control - Variable pressure level - Pressure measurement; 0-99 % - Manual work mode - 50 programs easy to change - 6 cycles to one program, max cycle time 100h, two phases on cycle - Total time one phase 99 minutes - Brand new inverter Lenze Section responsible for vacuum; - Vacuum pump Busch 36m3 /h - Vacuum valves Danfoss - Total power 5.5 KW ( main motor 4KW + pump 1,5 KW ) - Total weigth 1500 kg - Fully made of stainless steel

MTI P-10 laboratory mixer The laboratory mixer is suitable for mixing, homogenizing, dispersing and suspending of low-to high-viscosity products, heated, pressure and vacuum resistant Heating cooling jacket 5 bar Product space-1 / 0.75 bar Tank 15 l, Volume 11 litres. The machine includes two containers heated, presses a vacuum pump and a dispensing device to high-viscosity products from the mixing container. The documentation is available.

Are you looking for spare parts for your cone mixer? We have the most common spare parts suitable for various brands such as Nautamix, V-Mix, Vrieco mixeretc. in stock, or can produce them quickly and cost-effectively in our workshop. - Mixed screws - Replacement or replacement gearbox - Replacement or replacement of swivel arms - Gears, shafts, seals - Top bearings - Cross joints - Radial bearing - Outlets - Usw. We also have a repair and maintenance service. We would be happy to make you a non-binding offer. E-mail: t.roechter@heiligbv

You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv

Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.

Ruhle MKR 220 high tech tumbler with cooling and vacuum.

Vakona ESK 125 Tumbler, vacuum mixing and tumbling machine, the machine comes with tumbling arm and mixing arm, container size 125 liters, MC control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Height 2130 Width 1410 mm Length 2130 mm Weight 1500 kg Capacity 1200 l Voltage Electrical: 400V 50Hz 3N Installed Power 9.1 kw Main material Stainlees Steel Load 1000 kg Mixing System Spiral With Paddles Product discharge Pneumatic dampers, front Mixer type Vacuum Mixer Shafts amount Double Shaft

Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.

Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.

Wolfking” mixer-grinder Type TSMIG 1250/200 twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid suitable for cooling with N2 or Co2

Anschlagmaschine 20 l, Fabr. Rego

Rühle Tumbler MKR 300, Ruehle Hightech Tumbler with vacuum, incl. mixing and tumbling arm, container size 300 liters, Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device. You are very welcome to inspect the machine at our facility in Koblenz, Germany. If you have any questions, please do not hesitate to contact us.

Blender Talsa MIX95P; 400 V, new, Bowl capacity 95 litres, engine completely in stainless steel, separate stirrer and Bowl drive, 1 speed, forward and return, Bowl tilt, Dimensions Lxwxh approx. 108x80x120cm, weight 170kg New machine, built in 2018

with mixing and Meng arm cooling vacuum

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

NNP Stainless vacuum tumbler, 1500Kg capacity, forward / reverse, with timer, two stainless lids, 3Ph

Unaudited Auction-ID: A7-45427-264

https://www.behringer.com/product.html?modelCode=0601-ADG Sale with the following accessories: 1x IEC connection cable C13 Auction-ID: A7-45172-50

Dynacord Ps 800 8-Channel Power Mixer Mixer Auction-ID: A7-45427-112

Good condition Lots of accessories Auction-ID: A7-45427-43

Type: HM 200, high-performance mixer, partly in VA, Y:00, 1987, 6.5 / 9.5kW, 2 knife heads, control cabinet, completely on base frame, drives can be polum-switched.

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.

Material: stainless steel (1.4541) Engine: 7.5 kW Content: 500 ltr Weight: 1000 kg Length x Width x Height: 1200 mm x 1200 mm x 3100 mm With jacket 22 rpm Very good condition. We plan and build for the complete system from used and new machinery, exactly for your needs. Are you looking for something else? Write us below!

Material: stainless steel Engine: 160 kW Content: 15000 ltr Weight: 11000 kg Length x Width x Height: 6300 mm x 2200 mm x 2500 mm Mechanism SDW (340kW) Flender Speed: 1500 / 63 More details on request. Very good condition. You can also get the entire system with all components you need.

Material: stainless steel Volumes: 3,000 litres new machine We build the mixer you require. Do you need a whole plant from used or new components? Write us below!

WESTFALIA MZA 10 dynamischer Inlinemixer, Kapazität abhängig vom Produkt.

Material: stainless steel Year of manufacture: 1980 Content: 1000 ltr Weight: 350 kg Length x Width x Height: 3800 mm x 1900 mm x 1900 mm Drive shaft: 6,8 kW, snail 0,6W; Drive snail: 80 1/min. We develop, plan and build for you the whole plant exactly for your needs from new and/or used machines. More then 1000 used machines on stock. Write us below!

Material: High-grade steel Year of manufacture: 2011 Engine: 4 kW Content: 50 ltr 1 chopper You can also get the entire system with all components.

used lime-wash mixer material: Metal height: 4.00 m with engine width: 2.00 m diameter: 2.00 m connections: below, on top mixing works: yes Revideckel: yes

Technical specifications Category used machines Subcategory mechanical processing of meat Type Mixer Height 2200 mm Width 1500 mm Length of 2600 mm Capacity 800 l Power supply: 400V 50 Hz 3N Full power of 18 kW The main material stainless steel, acid-proof The delivery time 2-3 weeks The type of the agitator Paddle Loading Tote bin Loader, free-standing The type of mixer Mixer open The number of twin-shaft Description Mixer company BABE provide quick and intensive mixing of the product. Presented machine has many uses and is ideally suited for mixing products of different consistency. Mixer has two paddle shafts provide homogeneous and the highest quality product. Is controlled using the control panel where we can monitor and adjust the device to our requirements. Specification: Brand: LASKA Model: ME 800 Type: rotary vane Mixer Size: 2200 x 1500 x 2600 (mm) ...

No.: 3164 Year of construction: 2001 Type of current. 400V vacuum pump, double jacket Electric heating adjustable Homogenizer adjustable Schauglass, perfume funnel in Rezleitung and cover etc. Mobile frame, control cabinet Dimensions: LWH = 800x1000x1650mm

Volume: 1000 ltr. Material: mild steel

Tank / plant: Used lime milk Manufacturer: Passavant Material: Steel Size: located 1.77 m Height/length: 1.00 m Volume: 240 l

Seal Drawing No. 14430-2815C2

Seal Drawing No. 14430-2818C2

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98, NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motor, 3ph, 660V. Currently without controls, hydraulic unit or lubrication.

Seal Drawing No. 14430-2824C2

Vacuum stainless steel planetary mixer mixer mixer mixer mixer used, as good as new condition State. As good as new Gross volume: 140 litres Attachment (batch) size: 35 to 100 litres max. 200 kg Max pressure: Vacuum 10mbar absolute up to 1200mbar absolute Process pressure range up to max 200 mbar Max operating temperature: 80°C Mixing tool: 7.5 kW Stirring head speed: 3-40 rpm Mixing tool speed: 10-120 rpm Total connection power: 25 kW Operating voltage: 3x 400 V / 50 Hz Control voltage: 230 V / 50 Hz or 24 V DC Siemens PLC Visualisation Filling nozzle slated with pneumatically spun rotary flaps Filling snail Frequez controlled motors Level sensors hydraulic excavation with Siemens Symatic Multi Panel Touch / Siemens Simatic controller / Siemens frequency inverter with 2x mobile cylindrical exchangeable container (140 L ) with cooling jacket (20 L) made of stain ...

Stock # U2333-1 Used carbon steel jacketed paddle type mixer by Kates (PL) type 2M1.6. Total volume 1700 l, working volume about 1600 l. Mixing chamber is designed for work on pressure up to 0.14 bar in working temperature range from 5 - 40 C. Mixer has mixing shaft with 6 paddles and two rods working close do front walls. Shaft is driven by el. motor 55 kW, 1483 rpm in Ex design, through gearbox with reduction i = 72.71, what gives working rotation of shaft up to 20.39 rpm. Mixing chamber is covered with carbon steel cooling jacket with volume 75 l. Working pressure on jacket up to 0.5 bar at temperature in range from 5 up to 40 C. Mixer has top inspection manway with bolted lid and diameter 500 mm. Central bottom discharge with pneumatically operated valve. Mixer is mounted on carbon steel supporting construction. Machine is able to work as Ex II3GcIIA T3 /ATEX. Mixer is equipped wi ...

: Plant used lime milk Manufacturer: Passavant Material: Steel Size: 3.80 m Height: 1.20 m Volume: 1.6 m³ Other: with agitator and Revi

- Capacity 2,000 litres - Motor power: mixing screw:3.0 kW,swivel arm:0.55 kW - Usable volume approx. 1,600 litres (depending on product characteristics) - Container and lid parts are made of stainless steel 1.4301 (V2A) - Swivel arm and transmission parts are made of normal steel - 1st side outlet is made of stainless steel 1.4301 (V2A) - All lubricants are H1 and halal approved and certified

New machine 24-month warranty Benefits: + TOP value for money + Table planet stirrer with simple, digital control + 5 speeds (LED display) can be controlled at the touch of a button + Timer (LCD display) with auto shut-off + with plastic protective hood and ingredient shake + Machine stands on 4 vibration-absorbing adjustable feet + Boiler stroke with lever + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 10 litre stainless steel boiler - 1x whisk for 10 litres boiler - 1x flat stirrer for 10 litres boiler - 1x kneading hook for 10 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - additional 10 litre stainless steel boilers - additional tools (stirring whisk, flat stirrer, kneading hook) Technical data: - Engine power: 650 W - Rpm at 50Hz: 100 - 500 (level 1 - level  ...