banbury mixer used for sale

1 x Farrel model F80 banbury internal mixer, Serial number: 996006, Year of manufacture: 1999 (new), Chamber volume 80litre, With 4 wing ST rotors, pneumatic hopper, hydraulic drop door dicharge with Linear actuator and spade latch, FYH hydraulic dust stops, Unidrive gearbox, With 600 HP DC variable speed motor and drive/SCR controller, Complete with hydraulic unit, Lubrication system, 3 Zone TCU and Farrel series 2000 operator panel. High spec mixer (fully hard chrome plated chamber and rotors). Previously used for PVC.

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).

1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.

1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.

1 x Farrel Pomini model F160 Banbury internal mixer, Original year of manufacture: 1980, but rebuilt in 2000 (very good condition), Chamber volume: 160L Net batch size: 120kg, With 2 wing type rotors, Rotor tips hard material coated and fully chrome plated Rotor speed max 50rpm, pneumatic hopper, hydraulic drop door, FYH dust seals, Unidrive gearbox, With 435kw DC variable speed motor and electrical controls (415V). Complete and in good condition.

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

Tangential Chamber volume 70 l, hydraulic drop door AC motor 320 kW / 380V / 50 Hz, 1483 RPM Year 1987 Previously used for PVC.

Machine details New Machines 4 Food Tumbler Mixer Model Uniball 225 Mixer Tumbler All stainless steel construction Capacity 225 litres, load capacity 60 kg to 100 Kg With inner blades to assist product roll Variable speed from 12 rpm to 24 rpm Motor gearbox drive 1.1 Kw Electric tipping discharge by motor gearbox Motor gearbox drive 0.12 kw Electric 400 volts 50 Hz Electrical controls mounted in IP 65 stainless steel control box Rigid construction to withstand movement Mounted on stainless steel wheels Discharge height to suit a standard 200 litre tote bin Overall length 1.6 metres Overall width 1.25 metres Overall height 2.0 metres Suitable for all type of products 12 months warranty

Condition: presentation machine Size: 120 Liter usable Volume - with control system - with pump to empty out

Condition: presentation machine Size: 160 L usable Volume - with control system - with pump to empty out

Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.

Producer: Suhner Description: - Capacity- 2000l - Brand new microprocesor Mikster MCM 023 - Variable drum speed - Automatic control - Variable pressure level - Pressure measurement; 0-99 % - Manual work mode - 50 programs easy to change - 6 cycles to one program, max cycle time 100h, two phases on cycle - Total time one phase 99 minutes - Brand new inverter Lenze Section responsible for vacuum; - Vacuum pump Busch 36m3 /h - Vacuum valves Danfoss - Total power 5.5 KW ( main motor 4KW + pump 1,5 KW ) - Total weigth 1500 kg - Fully made of stainless steel

Producer: Servotech Description: Vacuum mixer Servotech - Capacity 340 l - Out put 240 kg/h -Total power 4,0 KW - Dimension; 1500mm x 800mm x 1300mm -Total weight 650 kg - Manual operation - one mixing and discharging gear - Top and discharging covers opened manualy - Machine fully made with s/s

MTI P-10 laboratory mixer The laboratory mixer is suitable for mixing, homogenizing, dispersing and suspending of low-to high-viscosity products, heated, pressure and vacuum resistant Heating cooling jacket 5 bar Product space-1 / 0.75 bar Tank 15 l, Volume 11 litres. The machine includes two containers heated, presses a vacuum pump and a dispensing device to high-viscosity products from the mixing container. The documentation is available.

Are you looking for spare parts for your cone mixer? We have the most common spare parts suitable for various brands such as Nautamix, V-Mix, Vrieco mixeretc. in stock, or can produce them quickly and cost-effectively in our workshop. - Mixed screws - Replacement or replacement gearbox - Replacement or replacement of swivel arms - Gears, shafts, seals - Top bearings - Cross joints - Radial bearing - Outlets - Usw. We also have a repair and maintenance service. We would be happy to make you a non-binding offer. E-mail: t.roechter@heiligbv

You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv

Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.

Ruhle MKR 220 high tech tumbler with cooling and vacuum.

Vakona ESK 125 Tumbler, vacuum mixing and tumbling machine, the machine comes with tumbling arm and mixing arm, container size 125 liters, MC control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Height 2130 Width 1410 mm Length 2130 mm Weight 1500 kg Capacity 1200 l Voltage Electrical: 400V 50Hz 3N Installed Power 9.1 kw Main material Stainlees Steel Load 1000 kg Mixing System Spiral With Paddles Product discharge Pneumatic dampers, front Mixer type Vacuum Mixer Shafts amount Double Shaft

Condition: Presentation machine Size: 120 Liter usable volume

Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.

Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.

Wolfking” mixer-grinder Type TSMIG 1250/200 twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid suitable for cooling with N2 or Co2

Rühle Tumbler MKR 300, Ruehle Hightech Tumbler with vacuum, incl. mixing and tumbling arm, container size 300 liters, Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device. You are very welcome to inspect the machine at our facility in Koblenz, Germany. If you have any questions, please do not hesitate to contact us.

Anschlagmaschine 20 l, Fabr. Rego

Blender Talsa MIX95P; 400 V, new, Bowl capacity 95 litres, engine completely in stainless steel, separate stirrer and Bowl drive, 1 speed, forward and return, Bowl tilt, Dimensions Lxwxh approx. 108x80x120cm, weight 170kg New machine, built in 2018

with mixing and Meng arm cooling vacuum

Lake mixer / Mixer -Manufacturer: Sprematec -Condition: presentation machine / demonstration system -Size: 120 L

REF-1902 TEC-MAQ VACUUM MEAT KNEADER-MIXER Meat kneader with vacuum system and T-shaped mixing paddles. Manufacturer: TEC-MAQ. Model: ALFA-150. Serial no. 1125/OC. Year: 1996. 380V. 5,7A. 2.25kW. Capacity: 150 litres. Meat capacity: 80-100kg. Equipped with mechanical variable speed drive. Inner dimensions: length 600mm, width 480mm, height 600mm. Outer dimensions: height 1,600mm, width 700mm, length 1,250mm.

For sale a refurbished vacuum tumler. New control cabinet !

Product number: 1574B Type: TSMIV3250L Serial number: 56453 & 56455 Year of construction: 1993 Mixer: 4500 litres double paddle mixer Capacity: max 3250 kg product Power: 3 x 380V, 50Hz, 37kW Dimensions: 3400 x 2200 x 2700 mm With Scanio lifter for 200L bins Single discharge valve

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

NNP Stainless vacuum tumbler, 1500Kg capacity, forward / reverse, with timer, two stainless lids, 3Ph

Matas spiral mixer with 2 mobile s/s tubs, mixer dimensions: 1800 mm x 1150 mm x 1580 mm, inside dimensions tub: ø 1050 mm x 500 mm, total dimensions tub: (2x) 1200 mm x 1150 mm x 1020 mm.

Matas spiral mixer with 2 mobile s/s tubs, mixer dimensions: 1800 mm x 1150 mm x 1580 mm, inside dimensions tub: ø 1050 mm x 500 mm, total dimensions tub: (2x) 1200 mm x 1150 mm x 1020 mm.

Tilting

Capsule Mixer M+W Capsule Mixer Select, S/N 183097, Instruction Manual

P. Prat S.A. tiltable mixer, type mixer: TI-120-R, number: 61373, year of construction: 1993, 380 V, type tilting device: EHT, number: 61374, year of construction: 1993, 380 V, 50 Hz, 1.5 kW, dimensions: 2150 mm x 1350 mm x 1620 mm.

P. Prat S.A. tiltable mixer, type mixer: TI-120-R, number: 64371, year of construction: 1993, 380 V, type tilting device: EHT, number: 61372, year of construction: 1993, 380 V, 50 Hz, 1.5 kW, dimensions: 2150 mm x 1350 mm x 1620 mm.

Manufacturer: Grenier - Charvet Model: E 25 Type : High viscosity paste mixer   Motor power : 25 CV - 18 KW Speed variation : mechanical Previous use : Painting Agitation tool: approx. ? 800 mm butterfly / cloverleaf type Tank clamping: pneumatic Vertical movement: hydraulic unit

Manufacturer: Grenier - Charvet Model: E 15 Year: 1973 ( Compliance file 2001) Type : High viscosity paste mixer   Motor power : 15 CV - 11 KW Speed variation : mechanical Previous use : Paint 220 L tank Mixing tool: ? 705 mm butterfly / cloverleaf type Tank clamping: pneumatic   Vertical movement: hydraulic power unit Height in low position: 2040 mm Height in high position: 2880 mm Stroke: 840 mm

Manufacturer: Grenier ? Charvet Model: E 15 Year: 1973 ( Compliance file 2001) Type : High viscosity paste mixer   Motor power : 15 CV ? 11 KW Speed variation : mechanical Previous use : Paint 220 L tank Mixing tool: ? 705 mm butterfly / cloverleaf type Tank clamping: pneumatic   Vertical movement: hydraulic power unit Height in low position: 2040 mm Height in high position: 2880 mm Stroke: 840 mm

Manufacturer: Grenier - Charvet Model: E 35 Year: 1974 ( Compliance file dated 2001) Type : Paste mixer / butterfly mixer   Motor power : 35 CV - 25 KW Speed variation : mechanical Previous use : Paint tank 1160 L and 440 L Agitation tool: ? 1260 mm butterfly/clover type (? 950 mm possible) Tank clamping: pneumatic   Vertical movement: hydraulic power unit Height in low position: 2770 mm Height in high position: 4070 mm Stroke: 1300 mm   Technical file available

Manufacturer: Grenier - Charvet Model: E 15 Year: 1973 ( Conformity certificate in 2001) Type : High viscosity paste mixer   Motor power : 15 CV - 11 KW Speed variation : mechanical Previous use : Paint 220 L and 440 L vessels Mixing tool: ? 960 mm butterfly Vessel clamping: pneumatic   Vertical movement: hydraulic unit Height in low position: 2040 mm Height in high position: 2880 mm Stroke: 840 mm