136,440 used machines on RESALE, but how to find them? Machine Search
Bone Band Saw KOLBE K260 Technical data: Type: Kolbe K 260 400 V / 50 Hz / 1.1 kW / 3.1 A Year of construction: 2024 Cut side passage max.: 215 mm Max. cutting height clearance: 250 mm Table dimensions: L46 x D70 cm Machine dimensions: H160 x W60 x D70 cm Saw blade size: 2170 x 16 mm Weight: approx. 115 kg Equipment: Device completely stainless steel Stainless steel base frame on 2 swivel castors with brake & 2 fixed castors (optional equipment!) Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone meal container (removable) Left-hand delivery Engine protection Engine brake RRP. in this special version: EUR 8,817.90 Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions ...
saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm
used
Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.
AUTOMATIC CUTTING SAW machine model STROMAB PS 45 for solid wood, wooden packaging, furniture and others second hand machine with automatic movement of unit volt. 380/50 roller conveyor of mt. 2 to the right of the blade roller conveyor of mt. 2 to the left of the blade technical details : motor power Hp 5,5 blade diameter mm.450 blade hole diameter mm.30 Blade Speed RPM 2800 cut-off capacity mm 510 x 130 (H) net weight Kg.600
cutting width: max. 330 mm Cutting height: max. 150 mm Saw blade diameter: 550 mm Motor output: 7,5 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar work height max.: 900 +- 20 mm Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 550 the semi-automatic chop saw -------------------------------------------------- - Maximum cutting area 220x150/330x50 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 7.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to mini ...
From insolvency: Avola ZB 400-5 Year of construction 1996 No.51809 380 volts 130mm cutting height Saw blade 400mm Table size approx. 1030x740mm
Circular Metal Saw manufactured in 2020. This Behringer VMS 370 PV features a cutting capacity of up to 130 mm for round material and 120 x 120 mm for square material. It includes a saw blade diameter of 370 mm and a hydro-pneumatic saw feed. If you are looking to get high-quality cutting capabilities, consider the Behringer VMS 370 PV machine we have for sale. Contact us for further details.
This 4-axis BIESSE Selco WNTR 600 was manufactured in 2002. It features a maximum blade projection of 120 mm to 132 mm and cutting lengths of 3,200 mm, 3,800 mm, and 4,500 mm. The machine is equipped with a powerful main saw motor ranging from 13.5 kW to 18 kW and a saw carriage speed of up to 150 m/min. If you are looking to get high-quality panel cutting capabilities, consider the BIESSE Selco WNTR 600 machine we have for sale. Contact us for further details.
cutting width: max. 610 mm Cutting height: max. 150 mm Saw blade diameter: 600 mm Motor output: 9,2 kW turning speeds: 2750 U/min Required air-pressure: 7 bar work height max.: 900 +- 20 mm Dimensions (L/W/H): 770x1385x1370 mm SALVAMAC Legend 600 the semi-automatic chop saw -------------------------------------------------- - Maximum cutting area 420x150/520x100/610x30 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 9.2 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system ...
Various diameters and widths Auction-ID: A1-49785-229
This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information.
A Baumunk contour wire saw in need of repair is offered. Drive power: 5.5kW, control: Bosch OSA. The machine has been idle for about one year. Contour sawing was still working well when last used. The mounting for the grinding rollers is defective. Inspection by appointment possible.
cutting width: max. 375 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 500 fast semi-automatic chop saw -------------------------------------------------- - Maximum cutting area Option A: 220x125/310x50mm Option B: 350x80/375x50mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 5.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to ...
motor: 3 kW stroke: 60 cm motor (saw) tilting angle arm can be changed sawblade diameter: 350 mm
Carriage 3,80 m. Motor power: 7,5 kW Saw-blade tilting: 0? bis 45? Cutting height: max. 157 mm with sawblade ? 500 Rotational speed: 3000 - 3600 - 4200 rpm Cutting width: 1300 mm Scorer with 2-axes electrical positioning Ripfence with motorised postioning
Carriage 3,30 m. Motor power: 5,5 kW Saw-blade tilting: 0? bis 46? Cutting height: max. 87,5 mm with sawblade ? 315 Saw-blade diameter: 250 - 400 mm Rotational speed: 4000-4800-6000 rpm Cutting width: 1250 mm Scorer with 2-axes electrical positioning Ripfence with motorised postioning
Cutting capacity: 4300 mm x 4250 mm. Sawblade height: 95 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 5-130 m/min. Returnspeed 130 m/min. Programm fence speed: 80 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1050/1850/2650/3450 mm. Machine control: CADmatic 4 air tables of 2160 x 650
Key data: 360 mm
Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--
Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317
Wheel diameter: 900 mm Cutting height: 300 mm cutting width: 880 mm Motor output: 4,5 kW Table dimensions: 840 x 900 mm Table tiltable: -15° bis +45° Grad Dimensions (L/W/H): 1.800 x 1.000 x 2.800 mm machine weight ab.: ca. 1.000 kg saw band length: 6.100 6.200 mm : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 150 mm cutting range - square -: 120 x 120 mm cutting range - flat -: 300 x 40 mm capacity 45 degrees: round: 130 mm capacity 45 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 245 x 40 mm mitter cutting - all-position: 90 ° cutting speed: 13 / 25 m/min control: minipos 807 total power requirement: 4,3 kW weight of the machine ca.: 850 kg dimensions of machine L x W x H: 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Length of infeed table: 6000mm, length of outfeed table: 4300mm, length: 2400mm, width: 1300mm, height: 1800mm, with saw blades and length stop as accessories and documentation, was not regularly maintained, without maintenance reports, no known defects.
Sawblade tiltable: 0-45 ° Length of the rolling table: 3.200, 3.800 mm cutting width: 1.300, 1,500 mm Motor output: 7,5 kW Cutting height: 177 mm Cutting height at 45°: 133 mm Saw blade diameter: 500 mm Speed: 3000/3600/4200 U/min. work height max.: 870 mm Dust suction hood: 1x120, 1x100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...
cutting width: max. 250 mm Cutting height: max. 80 mm Saw blade diameter: 400 mm Motor output: 3,0 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar work height max.: 900 +-20 mm mm Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw -------------------------------------------------- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system t ...
ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of choiceing single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...
Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Cutting area at 90° rectangle: 200 x 80 mm Cutting area mitred at 45° rectangle: 150 x 70 mm Cutting speed: 13, 17, 26 m/min Drive motor: 380 V, 1.7/2.2/2.6 kW Space requirement: 1050 x 1000 x 1680 mm Weight: approx. 850 kg
Key data: 400 mm, 180 mm
Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.
Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates
Driven heavy roller conveyor for a gang saw, band saw Machine dimensions: total length 8300 mm, width 1800 mm, roller width 1600 mm, height roller of floor 580 mm, Roller Number 11 pieces Gear motor Power 2 kW/1400 rpm Total weight 2000 kg. As good as new
maximum number of results exceeded
please refine your search
450 € 
