ball mill used for sale

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 20 mm -Weight: 4 kg

NOVAR ACTIVE 4000 CNC milling machine built in 2002 in Italy is the perfect choice for even the most intensive production challenges. The machine allows for efficient machining of large-sized workpieces with a maximum weight of 10 tonnes with reliable components in the form of cutting tools and a high-speed spindle. The installed HEIDENHAIN TNC 426M CNC control additionally guarantees seamless operation of the machine and utilisation of its full potential and capabilities. The NOVAR ACTIVE CNC bed milling machine has been continuously serviced and has new bearings on the spindle. The total weight of the machine is 27000 kg. Technical parameters of the NOVAR ACTIVE 4000 milling machine - CNC control: HEIDENHAIN TNC 426M - feeds in the X/Y/Z axis: 3500/1100/1400 mm - rapid traverse in the X/Y/Z axis: 8000/10000/10000 mm/min - work table surface (L x W): 4000 x 1000 mm - maximum wor ...

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200 V -Hole diameter: 16 mm -Weight: 5 kg

Tenon milling machine / tenon cutting and slitting machine Manufacturer: Kölle Model: Z40 Year of construction: 1992 1 x Sawing 1 x Milling

Key data: 340 mm, 700 mm

available 27" Mill Description Attached!

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2820 rpm at 50 Hz -Motor: 2.2 kW 5800 rpm at 100 Hz -Voltage: 380 V -Shaft mounting: Ø 30 mm -Weight: 15 kg

Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Universal milling angle head, milling angle head -Receptacle: Collet -Recess inlet: Ø 160 mm -Bolt circle: 174 mm -Milling spindle: 45° -fully swiveling -Dimensions: 200/185/H320 mm -Weight: 20 kg

20-75- CNC router WOODLAND MACHINERY (new) Type SX1325A-4 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 6kw+4.5kw x 3 18000 rpm. Engine Hybrid servo Control system LNC system Repeat positioning accuracy 0.03mm Work table vacuum plate Vacuum pump 11kw Maximum speed 50000 mm/min Maximum working speed 25000mm/min Resolution ±0.05 mm System resolution ±0.001 mm Code G Inverter 7.5 kw Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 2100 kg The price is 23100 Eur

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1.85 kW at 17570 rpm at 300 Hz -Voltage: 165 V -Receptacle: Shaft collet -Number: 8 motors available -Price: per piece -Dimensions: 350/75/H160 mm -Weight: 12 kg

Bruks RR800 Capacity: at roller conveyor feed rate 60 m/min for logs with diameter 60 cm - 4 logs/min at roller conveyor feed rate 30 m/min for logs with diameter 60 cm - 3 logs/min Maximum removal 200 mm Max log diameter 800 mm measured 1500 mm from the root and Length min 3,2 m max 6,2 m Number of cutting tools 30 Cutting tool width 60 mm Cutting motor 37 kW, 1500 rpm Cutting length 900 mm Roller chain driver: gear reductior transmission motor of 2.2 kW Hydraulic unit 5,5 kW Total weght including main motor 5000 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.6 kW 17350 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 16 mm L 10 mm -Number: 4x motors available -Price: per piece -Dimensions: 280/60/H140 mm -Weight: 4 kg

Key data: 305 mm, 550 mm

available 22" Mill Decription attached!

Grinder mill with blades Brand: Prat, model: P-6, cutting chamber: 800x600 mm, motor: 37 KW (50 hp), open rotor. With mechanical hopper opening. No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm L 25 mm -Weight: 3 kg

Stock number: 3880 PROCESSING Manufacturer: Johnford , Type: VMC 824 Machine NO.: 49208455, Year of manufacture: 1992 Specifications: Table size 1100 x 400 mm Longitudinal movement (X) 900 mm Transverse movement (Y) 500 mm Vertical movement (Z) 570 mm Spindle cone BT 40 Spindle speeds 36-6000 rpm Spindle motor 7.5/5 Kw Tool changer 24 places Control Fanuc OM Fabr. Operating hours spindle 4412 hours Length: 3100 mm, Height: 2850 mm, Width: 2350 mm, Weight: 5000 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.23 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 15 mm L 25 mm -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 2 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.23 kW -Speed: 18000 rpm at 300 Hz -Dimensions: 210/70/H100 mm -Weight: 2 kg

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.6 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 16 mm L 10 mm -Number: 2x motors available -Price: per piece -Weight: 3.3 kg

Make CONDUX Type CS 450/600-2 Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

Manufacturer: Probst & Class (PUC) Type: N/60/S Factory number: 84.016 Power: 2.2 kW with hopper Hopper volume: approx. 20 l LWH: 460 x 330 x 900 mm

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 17300 rpm at 300 Hz -Shaft mounting: Collet Ø 12 mm -Dimensions: 340 x 110 x H150 mm -Weight: 10 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg

Tool magazine, tool holder, tool mount, milling tool -1 Recording: HSK80 -for tool changers -Shrink chuck, collet chuck, surface chuck, reducing sleeves, cutter head, end mill -Weight: 2 kg

Tool holder, tool magazine, tool mount, milling mount, milling tool -1 Recording: HSK80 -for tool changers -Shrink chuck, collet chuck, surface chuck, reducing sleeves, cutter head, end mill -Weight: 2 kg

Colloid Mill Manufacturer: Fryma Type: MZ 80/A Factory No.: M13063 Power: 2.2 kW Year of construction: 1987 Working room pressure: 1 bar very good condition with double jacket with outlet chute with pressure gauge LBH: 370 x 340 x 760 mm

Milling machining center CNC Hedelius Tiltenta T7-4200

Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

Radius cutter, milling cutter -Finishing cutter -1x Diameter: 84 mm Height 44 mm R12 mm -1x Diameter: 102 mm Height 53 mm R15 mm -1x Diameter: 114 mm Height 70 mm R20 mm Type: HSS Quantity: 3 pieces -Sale: only complete set -Weight: 5.4 kg

Dmg DMU 125P Hidyn Machining Center ::SPECIFICATIONS::: CNC Model: Heidenhain Tool holder: SK 40 Spindle speed: 20000 Number of tools: 60 X-axis stroke: 1250mm Y-axis travel: 880mm Z-axis stroke: 800mm Rotary Table: Yes Rotary Table Type: Continuous Table size: 1250 x 1000mm Allowable load on the table: 1500Kg Fourth and fifth axis head: yes Fourth and fifth axis head type: continuous High refrigerant pressure: yes External tank system with filter: yes Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Weight: 18500Kg

For sale: Kiheung cnc milling machine type Point-U6 with Huron Universal milling head with Heidenhain control. The X, Y and Z axis movement is 1600 x 720 x 760 mm. Table size is 2.200 x 550 mm. Main motor power 11 kW, speed range 40 - 1,600 rpm/min. ISO 50 spindle mount. . Machine weight is 8,000 kg. The machine is in good condition. Still visible under power. Available at short notice, subject to prior sale.

Counter support, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Dovetail: 144 x 184 mm, 30 mm high -Drawing with the photos -Dimensions: 270/130/H195 mm -Weight: 12 kg

Tool holder, milling tool holder -Number: 21x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 88 kg

Tool holder, milling tool holder -Number: 21x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 90 kg

MICRONIZER JET MILL MC One Technical Data Nominal Estimated Batch size Process gas Process gas Installed diameter capacity 7 bar 12 bar power 33 mm From 0.1 From 0.2 gr 0.09 Nm3/min 0.18 Nm3/min _ (1.3 inches) to 50 gr/hr to 50 gr (3.18 CFM) (6.36 CFM)

Stock number: 3885 PROCESSING Manufacturer: HERMLE, Type: C800 V Machine NO.: 14187, Year of manufacture: 2000 Specifications: Table size 1000 x 560 mm Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Infinitely variable spindle speeds 10,000 rpm Spindle motor 25/16.8 Kw Total power 43 KVA Tool changer 30 places Feed rate 1-2000/30000 mm/min Rapid traverse 35 m/min Control Heidenhain TNC 430 Fabr. Operating hours spindle 9318 hours Accessories: Chip conveying. Touch Probe Renishaw Cooling by spindle Spindle Cooling Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weight: 7000 kg

Fine impact mill B 315 with 15 kW motor, newly mounted

Stock number: 3886 PROCESSING Manufacturer: HERMLE, Type: C800 V Machine NO.: 15521, Year of manufacture: 2002 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Infinitely variable spindle speeds 10000 rpm Spindle motor 25/16.8 Kw Total power 43 KVA Tool changer 30 places Feed rate 1-2000/30,000 mm/min Rapid traverse 35 m/min Control Heidenhain TNC 530 Fabr. Operating hours spindle 10220 hours Accessories: Chip conveying. Cooling water system. Probe Renishaw OMP 60 Cooling by spindle Spindle Cooling Machines vice. Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weig ...

Granulator with rotor width 1000 mm, motor 37 kW, with hopper attachment and hydraulic feed slide. Knives resharpened and whole machine repainted. Very good condition. Optionally with total separator and fan for the regrind.

WE OFFER AN EXCELLENT STAMA , JUST PERFECT CONDITION WITH TOOLS STAMA TECHNICAL DETAILS MACHINE DATA Machine type: Machining center Manufacturer: Stama Model: MC 526 Compact Machine number: KMM 526 1508 Year of construction: 2005 Condition: used Functionality: fully functional TECHNICAL DETAILS Travel distance X-axis: 1,000 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 360 mm Rapid traverse X-axis: 45 mm/min Rapid traverse Y-axis: 45 mm/min Rapid traverse Z-axis: 45 mm/min Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Torque: 60 Nm DESCRIPTION TECHNICAL DETAILS Travel x: 1000 mm Travel y: 400 mm Travel z: 360 mm Control: Fanuc 18i-MB5 Projection: 350 mm Work ...

DMG DMU 75 monoBLOCK universal machining centre (5-axis): Year of construction 2015 Travel 750 mm x 650 mm x 560 mm Heidenhain TNC640 control system with DXF import option Tool magazine with 60 places Tool holder HSK-A 63 Spindle with 18,000 rpm Production package with scraper belt conveyor Coolant system 600 litres with IKZ 40Bar Blowing air through spindle center Blum Laser Tool Measurement Heidenhain Probe TS649 Oil and Emulsion Separation Plant Rinsing gun Operating mode 4 Zero-point clamping system from Lang Weight: approx. 9.5t Machine times (as of 04/2024): Machine on: 16.665h Spindle on: 3.386h

Hermle B300 Universal Machining Centre (5-axis): Year of construction 2012 Heidenhain iTNC530 control with DXF import option Tool magazine with 30 places Tool holder HSK-A 63 spindle with 15,000 rpm IKZ with 40Bar Blowing air through spindle center Blum Laser Tool Measurement Heidenhain Probe TS440 Oil and Emulsion Separation Plant Rinsing gun Zero-point clamping system: Partool Powergrip 160 (4-fold) Weight: approx. 7.5t Machine times (as of 04/2024): Machine on: 20.272h Spindle on: 6.618h

Tool holder, milling tool holder -Quantity: 20x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Sale: only complete set -Weight: 70 kg

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Tool holder, milling tool holder -Number: 17x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Sale: only complete set -Weight: 68 kg

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Key data: 5000 mm, 1600 mm

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Grinder Mill with Blades for Sale Brand: Prat Cutting Chamber: 500x320 mm Closed Rotor Without: Motor, Electrical Panel and Hopper For more details or to make an enquiry, please contact us.

Axis:XYZ (3-axis) Max. travel:950x500x450 Tool:SK-40 Control:HEIDENHAIN ITNC 530