bale press used for sale

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Gluing press Emmes Type: H EBP 500 . 10 Working length 5000 mm Working height 1530 mm Support width or depth 150 mm 10 Hydraulic Vertical Press Punch 5 pneumatic front hold-down devices max. compressive force 150/cm² Hydraulic pump 2.2 kW Oil pressure 159 kg/cm Air pressure 8 kg/cm²

Offer 25200 Specifications: - Pressure capacity 200 t - Working width 3100 mm - Passage between the uprights 2600 mm - Table width 180 mm - Projection 300 mm - Installation height 450 mm - Feed speed 80 mm/sec. - Working speed 9 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Drive 400 V / 18.7 kW - Space requirement approx. W 3300 x H 2950 x D 1900 mm - Weight approx. 10500 kg - with: - Adjustment of the crimping depth + baling pressure -Mot. Backgauge with handwheel fine adjustment - 4-fold universal die - sharpening tool - Two-hand control panel, foot switch,

Brand: DELLAVIA Model: Livorno Screw diameter: 125 mm Maximum allowable pressure: 200 tons Clearance between uprights below the guides: 320 mm Clearance between uprights within the guides: 240 mm Ram stroke: 280 mm Table dimensions: 300 x 400 mm Distance from table to guides: 230 mm Overall dimensions: 1.430 x 1.050 x 2.980 mm (H) Approx. weight: 2.900 kg

SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm 4 push-button plate suspension handles TS/500 Interface 4 safety light barriers Installed power: 3 kW

LVD PPBL-H 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 130 mm Max distance between table -- ram: 310 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 65 mm/sec Electric motor (power): 7,5 kW Weight: 6,5 ton

Stock number: P348, High pressure pump, stainless steel,, Rannie type 18.50,, mounted on stainless foundation with wheels., 3,0 kW motor, variator gear., 350 – 1750 rmp., Series no. 4661/71., Material: Stainless steel AISI 304

LVD PPBL-H 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 4 kW Length: 3200 mm Depth: 1350 mm Height: 2100 mm Weight: 5 ton

Stock number: D568, Tincture press, Steel 37,, mechanical., 12 l product chamber., Ø 250 mm., Material: Steel 37

LVD PPBL 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 80 mm/sec Working speed: 7 mm/sec Returning speed: 88 mm/sec Electric motor (power): 5 kW Length: 3200 mm Depth: 1260 mm Height: 2100 mm Weight: 4 ton

Stock number: H068, Low pressure homogenizer, stainless steel,, Gaco type AL-70, table model,, Theoretical capacity: 600 l/h., Max pressure 10 bar., Material: Stainless steel AISI 304

Qty. 1 Second-hand aluminium extrusion press line Code Aluminium HE9 6063 Mfc.: Indian manufacturer Built: 1978 PLC hydraulic – upgradation done in the year 2005! Total Force of Press: 680 MT, 750 UST Extrusion Pressure: 210 Bar Billet Diameter: 5”, 121 mm Weight per Inch of Billet: 0.76 kg/inch Scope of supply: Log heating furnace Hot shear Extrusion press Overhead puller Under-bed cooling system Run-out cooling bed Belt conveyor Stretcher Cutting machine Die oven Conveyor table Conveyor for final packaging

A fully pneumatic Polzer glazing press is available. Clamping height: 2300mm, total press height: 2600mm, roller conveyor width: 170mm, roller conveyor height: 250mm, total depth: 1000mm, clamping width: 3500mm, total width: 4500mm. Documentation available. On-site inspection is possible.

Stock number: H056, Low pressure homogenizer, stainless steel,, Gaco type AL., Table model., Theoretical capacity 600 l/h., Material: Stainless steel AISI 304

Stock number: H063, Low pressure homogenizer, stainless steel,, Gaco type AL., Table model., Theoretical capacity 600 l/h., Material: Stainless steel AISI 304

Amada Promecam ITPS 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: EMA Passage between uprights: 2600 mm Max stroke: 105 mm Max distance between table -- ram: 370 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 10 kW Length: 3640 mm Depth: 2210 mm Height: 2340 mm Weight: 6580 kg

Stock number: H050, Low pressure homogenizer, stainless steel,, Gaco type 2., 2,2 kW motor,, 220/380 Volt., 1420 rpm., Material: Stainless steel AISI 304

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 10 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

Stock number: H046, Low pressure homogenizer, stainless steel,, Gaco type AL., 1-stage., 0,75 HP motor,, 220/380 V., Theoretical capacity 600 l/h., The homogenizer has not been used., Material: Stainless steel AISI 304

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 14 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

Stock number: SF171, Gel press filter column, stainless steel,, type Dan-process., Hanging in tiltable stand,, air controlled press cylinder at the top., Product filter in the bottom,, Ø 300 x H 1000 mm. column., Material: Stainless steel AISI 304

- 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Control: 2D Touch Passage between uprights: 7210 mm Max stroke: 350 mm Max distance between table -- ram: 650 mm Depth of throat: 400 mm Table width: 350 mm Locking speed: 70 mm/sec Working speed: 8 mm/sec Returning speed: 50 mm/sec Electric motor (power): 47 kW Power needed: 380V Length: 8300 mm Depth: 2600 mm Height: 4400 mm Weight: 90 ton

Stock number: SF061, Pressure filter, stainless steel,, ALA, E size 45., Standing on legs., Hinged, bolted lid in the top., Stainless stack of plates for 6 filters., Ø 530 x H 450 mm chamber., Material: Stainless steel AISI 304

Stock number: SF015, Dynamic axial compression flow-through bed, stainless steel,, type Dan-Process,, hanging in tiltable rack., Air driven pressing cylinder in the top., Product filter in the bottom., Ø 200 x H 900 mm column., Material: Stainless steel AISI 304

1.875 litre, Stock number: T3909, Litre: 1.875, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Pressure tank, Standing: 3 pcs. legs , Top: Dished, Bottom: Dished, Tank cover: In the side, Ø 360 mm., CIP: In top center, Working temperature: -10/150° C, Working pressure: 7,2 bar, Inner diameter: Ø 1200 mm., Total height: 2150 mm., Manufacturer: Vamdrup Rustfrit Stål, Year: 2002, Other: The tank is polished on the in side and previously used for pressure.

4.600 litre, Stock number: T3907, Litre: 4.600, Material: Stainless acid proof steel SS 2377, In stock: Yes, Amount in stock: 1 pc., Item: Pressure tank, Standing: 3 pcs. legs , Top: Dished, Bottom: Dished, Tank cover: In the side, Ø 500 mm., Working temperature: 5-40° C, Working pressure tank: 3 bar, Inner diameter: Ø 1750 mm., Total height: 2700 mm., Manufacturer: Vamdrup Rustfrit Stål, Year: 1997, Other: The tank is polished on the inside and previously used for pressure.

2.230 litre, Stock number: T3899, Pressure tank, stainless acid proof steel,, closed top, standing on legs., Dished top and bottom,, bolted tank cover in the side., The tank is polished on the in side, Previously used for pressure., Ø 1200 mm., Litre: 2.230, Material: Stainless acid proof steel AISI 316

High: 2.050 mm, Long: 750 mm, Force: 10 tons, Width: 600 mm, Weight: 800 Kg., Neckline: 150 mm, Stem travel: 200 mm, Rate of climb: 10 cm / sec, Piston rod ø of: 65 mm, Surface of the table: 300 x 300 mm., Specification: Hydraulics

145 litre, Stock number: T3886, Litre: 145, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Pressure tank, Standing: 3 pcs. legs with wheels, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Working temperature: Max 100° C, Working pressure: Max 4 Bar, Inner diameter: Ø 500 mm., Outer diameter: D 620 mm., Total height: 1480 mm., Manufacturer: Hosokawa Micron Europe BV, Model/type: R50-100, Other: 2 pcs. inspection glasses at the side

Bending Machine FEMAS PI 30.45 - 3000 x 45 t. - NC ESA 400, Information about technical data are not binding., Machine available subject to prior sale., Capacity: 450 Kn, Bending lenght: 3050 mm, Distance between shoulders: 2550 mm, Throath depth: 350 mm, Approach speed: 50 mm/s, Bending speed %smm/s: 10 mm/s, Return speed: 68 mm/s, Backgauge type: Motorized, Backgauge travel: 500 mm + R, Cn: ESA TRIA KLT 400 (3 axes), Main motor power: Kw 5,5, Weight: 5.500 Kg, Accessories: Tool set

Two T-slot tables, High: 2.500mm, Long: 1.700mm, Pump: 18L / mm, Force: 5 TN, Width: 1.000mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics

MAWEG frame press with automatic adjustment of height and width Press size 4.50 m.x 2.60 m. Frame Press Size: 5.30 x 3.40 x 1.30 m.

T-slot table, High: 2.500 mm, Long: 1.700 mm, Pump: 18 L / mm, Force: 5 TN, Width: 1.000 mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Step between uprights: 200 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics

L-profile: 120 x 120 x 10 mm flat steel: 300 x 15 mm round/square steel: 40 mm punching: dia 28 x 13 mm U/I-profile: 100 mm

LVD PPCB 150 ton x 4100 mm CNC Capacity: 150 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 90 mm/sec Working speed: 7,3 mm/sec Returning speed: 56 mm/sec Electric motor (power): 7,5 kW

LVD PP 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Backgauge: no backgauge Passage between uprights: 2550 mm Max stroke: 120 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 8,5 mm/sec Returning speed: 50 mm/sec Electric motor (power): 7,5 HP Weight: 5,6 ton

Equipment Description Used Indirect Extrusion Press • Brand / Model: SMS Hasenclever 28 / 31.5 MN McKechinstrang” • Type: Horizontal indirect extrusion system for non-ferrous billets • Drive: Mechanical main unit with hydraulic auxiliaries • Country of Origin: Germany • Current Status: Dismantled and available for dispatch • Serial No. / Year of Manufacture: [To be confirmed] 2. Key Technical Specifications Parameter Value Main Piston Force 25.07 MN Total Press Force with Coupling 31.23 MN Max Stroke 3,070 mm Working Stroke 2,825 mm Ram Speed at 28 MN 0–64 mm/sec Ram Speed at 31.5 MN 0–57 mm/sec Billet Diameter Range Ø 230–355 mm Billet Length (cold) 320–1,320 mm Receiver Heating System Resistance; max 63 kW / 375 °C Shear Force 0.64 MN Profile Ejector Force 0.31 MN Actuation Differential Cylinders Ø 280/200 3. Included Components • B ...

used baler Herateller: PAAL Type: PACOMAT II Year of Make: 1995 Specifications: Pressing force: 27 t Drive power: 18.5 kW Total connected load: 25 kW Throughput: 115 m³/h Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm (H x W)

Baler  Manufacturer: WMW AG  MY 2019  Type DIXI 40 SLk

automatic baler Manufacturer: PAAL Type: Pacomat IS Year of Make: 1990 specifications: Pressing force: 27 t Specific pressing force: 5.51 kg/cm² Total connected load: 23 kW Rated current: 46 A Main drive power: 18.5 kW Capacity: 80 m³/h Control: Siemens S5 100 U Bale size: 700 x 700 Filling opening: 800 x 600 mm

automatic baler Manufacturer: PAAL Type: KONTI 125 SO Year of Make: 1990 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)

Hydraulic embossing press from WSK

Inv. Num. : 8499 Type: PEKRS 160 Producer: IWK Created: 1970 Parameters: Table length: 2000 mm Table width: 1000 mm Maximum stroke rate per minute: 55 1/min Stroke: 8-180 mm Adjusting the ram: 110 mm

hydraulic: ja : 100 t weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Antike Spindelpresse - Antique Spindel Press Krause 35286 Baujahr / Year ca. 1934 - Serial-No. 35286 Pressfläche / Press Size max. 400 x 500mm Wunderschön verarbeitete antike Spindelpresse  Beautifully crafted antique Spindel Press

automatic baler Manufacturer: PAAL Type: KONTI 600 F/k with cross-binding Year of construction 2008 only 4 years in operation specifications: Press force: 145 t Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 2 x 75 kW Throughput capacity:approx. 510 m³/h Capacity at 35 kg/m³: 17.5 t/h Capacity at 60 kg/m³: 30.0 t/h Capacity at 100 kg/m³: 47.0 t/h Binding: 5-fold vertical Additional 4-fold automatic horizontal bonding Bale weight: approx. 800 - 1,250 kg depending on baled material and bale length Machine weight: up to approx. 39 t

Nominal pressing force ... 250t Table dimensions... 1120 x 800mm Slab dimensions ... 800 x 475mm Plunger adjustment ... 110mm L x W x H ... 1350 x 2550 x 2915mm Machine weight ... 13000kg Number of strokes ... 45/min Control Siemens The machine is in good condition, possible to test under power.

Presstation / Press station Stahl PS 46 Year 1988 - Serial-No. 26184 Arbeitsbreite / Working width max. 460mm

1x SK labeller GAI 6023-x01, built in 2021, for self-adhesive labels / adhesive labels with capsule roller & 2 label As good as new GAI 6023-x01 Year of construction 2021 2 label stations 1 station with 2 roll-on heads for roll-on capsules Attachment for capsules Molded parts for common bottle sizes Accumulation sensor in the outlet, collection table with belt drive Achievement: Labelling only 2800b/h with roll-on capsule: 2000b/h Price: €38,500 plus VAT ex Rheinhessen location

2 Farben Offsetdruckmaschine - 2 Color Sheet-Fed Offset Press Heidelberg GTO52-2+ Year 1997 - Serial-No. 714923 Size max. 360 x 520mm Impressions 48 Mio. Dampening System DDS with Technotrans refrigeration Plus Version Ink laser ducts Manuals Included