bale press used for sale

AUTOMATIC TENONER type BALESTRINI PICO volt. 380/50 working conditions : Excellent for chairs

double-sided long-hole drilling machine with automatic duty cycle, maximum working width / stroke length of oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20°, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 strokes per minute, pneumatic workpiece clamping, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and optically in very good condition

Balemaster Year: 2006 Type: CMG 268 Waste compactor

Baler Balemaster EO 399, built in 2012, with tamper Specifications: Manufacturer: Balemaster Europe Type: EO 399 Year of construction: 2012 Hours: 60,924 Drive power: 55 kW Press force: 103 t Filling opening: 1000 x 2000 mm Bale dimensions: 800 x 1100 mm Capacity: 211-495 m³/h Binding: 4-fold, automatic Dimensions: 9900 x 2200 x 2450 mm Weight: approx. 20,000 kg Material: Corrugated cardboard, paper, foil The press was serviced annually and the wear parts were replaced. In 2020, the master cylinder was replaced.

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI I2F machine for chairs composed by 3 working units : - circular saw diam. mm.350 motor power hp 3 - boring unit boring head with 5/7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 - vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage machine composed by 3 working units : 1) circular saw for cutting to length of pieces 2) boring unit equipped with multi bit drilling head 3) vertical spindle for moulding the machine may be used for a variery of job requirements , including the end cutting off , moulding curved surfaces and boring end cutting , or end cutting off amd moulding for finger jointing , or end cutting , etc.

AUTOMATIC TENONER machine BALESTRINI 2/TAO AUTOMATIC MORTISER machine BALESTRINI 2/CAP recondition machines volt. 380/50 NOT SEPARATE SALE

DOUBLE AUTOMATIC TEMPLATE SHAPER MACHINE Type BALESTRINI C70 Max. working width mm. 360 Max. working heigth mm. 120 Feed : from 1 to 8 mt./min. ( automatic or pedal variation ) n.02 Router Shaft diam. mm.30 n.02 Router Shaft motor power Hp 5,5 each one n.01 Hydraulic advance variable spped motor power Hp 1 net weight : kgs. 1000

COPY SHAPER machine Type BALESTRINI C70N Max. working width mm. 360 Max. working heigth mm. 90 Feed : from 1 to 8 mt./min. ( automatic or pedal variation ) n.02 Router Shaft diam. mm.30 n.02 Router Shaft motor power Hp 5,5 each one n.01 Hydraulic advance variable speed motor net weight : kgs. 1100

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI IF Special machine for chairs automatically cuts and bores all type of parts of chairs and furniture components . composed by : - circular saw diam.mm.350 motor power hp 3 - boring unit ( boring head with 5/7 mandrins ) motor power Hp 3 max. working stroke of boring unit mm. 130 net weight kgs.400 Volt. 380/50

AUTOMATIC TWIN TABLE SLOT MORTISER Type BALESTRINI 2/CAP RECONDITION MACHINE Max oscillating length mm. 120 Max. mortise depth mm. 80 Spindle collect diameter mm.13 Max. bit diameter mm. 20 Spindle motor power: Hp 3 Oscillating motor power: Hp 1 Spindle rotation: rpm 9000 Volt. 380/50

CATALOG NUMBER 6024 TECHNICAL DATA - 2.9kW main engine - 0.75kW spindle motor - 0.75kW trolley feed motor - 380V power supply - dimensions length / width / height 1600x1100x1200mm - weight 891 kg Machine equipped with: - 2 tables with dimensions of 300x340mm - pneumatic clamps - angularly adjustable tables in two planes - the possibility of making long and round tenons on the tables - table speed and spindle speed regulated mechanically - adjustable up / down tables - pin width adjustment Net price: PLN 16900 Net price: EUR 3885 Net price, calculated at the rate of 4.35 PLN / EUR (with larger exchange rate fluctuations the price may change)

AUTOMATIC COPY SHAPER machine type BALESTRINI CP 4 second hand machine Technical Details : machine composed by 4 units : 2+2 shaper units max. working useful length mm.2500 max. working width mm. 500 max. working heigth mm. 180 speed rotation shaper units 8500 rpm speed rotation sanding units 3500 rpm hydraulic pump motor power Hp 5,5 net weigth kgs. 3300 Volt. 380/50

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA second hand machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. the BALESTRINI FTA performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined. all movements of the machine are controlled by pneumatic devices and sliding carriage is hydraulic composed by 3 working units : 1 - Cutting unit circular saw max. diam. mm.400 motor power hp 3 2- Boring unit boring head with 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 hydraulic sliding carriage

with automatic working cycle, max. working width / stroke length of the oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 huebe per minute, pneumatic factory tension, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and visually in very good condition

with an automatic working cycle, Max working width / stroke length of the oscillation 120 mm, depth of 80 mm, table tilt maximum 20 °, tool clamping diameter of 13 mm, drill diameter of 20 mm, spindle motor power 2.24 KW / Volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating engine power 0.75 KW, oscillation adjustable from 120-240 strokes per minute, pneumatic workpiece clamping, 4 dust nozzle D = 80 mm, deep space - 1,000 mm, width 1300 mm, height 1250 mm, weight 500 KG

AUTOMATIC COPY SHAPER machine BALESTRINI CP 6 second hand machine Machine for the simultaneous milling of elements of chairs, tables or other items by copying a template composed by 6 working units : 1+1 shaping units . motor power Hp 7,5 1+1 shaping units . motor power Hp 5,5 1+1 shaping units . motor power Hp 6 / 4,5 max. working width mm. 300 max. working heigth mm.180 hydraulic carriage max. working length mm. 2500 hydraulic pump motor Hp 5,5 volt. 380/50

AUTOMATIC COPY SHAPER machine type BALESTRINI JUNIOR second hand machine conditions : Excellent, machine like new CE mark : YES with tools : YES with safety protections and instruction booklet machine composed by n. 02 working units max. working length mm. 1400 max. working height mm. 180 max. working width mm. 500 tools rotation speed rpm 8400 feed speed of carriage : from 0,5 to 15 mt/min retun feed speed carriage mt.min. 70 spindle motors power Hp 10 x 2 hydraulic pump motor power Hp 4 volt. 380/50

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

Double sided round end tenoner Balestrini mod. TTSA Description:  Double sided round end tenoner Balestrini mod. TTSA complete with loader 1. Automatic loader 2. Control panel 3. min / max working length 240/1200 mm 4. maximum tenon size 100x30 mm 5. Capacity: 1200 tenons/hour (600 pieces/hour) 6. Tool rotation 9,000 rpm 7. Total power 6,5 kW

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

automatic TENONER machine BALESTRINI 2TAO machine for production of parts of chairs , sofà, bedrooms , funritures . volt. 380/50

automatic TENONER machine BALESTRINI 2TAO machine for production of parts of chairs , sofà , bedrooms , furnitures . volt. 380/50

automatic TENONER machine BALESTRINI 2TAO for production of chairs , sofà , bedrooms , furnitures , etc. volt. 380/50

Oscillating drill Balestrini Pragma TOP 14 spindles Spindle layout per side: 5x horizontal 2x vertical Aggregate motor power 4 x 1 kW Oscillating motor power 0.37 kW Mechanical oscillation Max. oscillation length 100 mm Max. depth 60mm Minimum/maximum distance between units 85-890mm Spindle speed 6000/12000 rpm Independent drilling angle adjustment Oscillation speed control Maximum tool size 16mm Air demand 160 l/min Minimum working pressure 6bar 2 independent magazines for elements with feeder Machine dimensions 1500x2400x1600mm

Double-sided double-spindle drilling and grooving machine Balestrini Pragma Top Characteristic Overall dimensions, mm - 1600х1600х1300 Power, kW - 4,5 Machine weight, kg - 1500 Drill diameter, mm - 16 Table height, mm - 950 Distance from the table to the spindle, mm - 100 Clamp - pneumatic

Balestrini linear milling machine two milling units pneumatic pressure of elements

SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI MOD. PRO 15 CNC - CE RULES - Working length mm. 170 – 2000 mm - Max tenon length 80 mm - Production: 1800 tenons/hour (900-1350 pieces/hour) - Tool rotation 11,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - With loader RBF 2 -Volt. 380/50 - S/N AO.118.88 - Year 2002

SECOND-HAND ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO - CE RULES - Max tenon dimensions 100x30 mm - Table tilt: max 20° - Workpiece fence max inclination 45° - Production: 600-700 tenons/hour - Tool rotation 9.000 rpm - Tenoning unit motor4hp -Volt. 380/50 - S/N F356M16 - Year 1995

BALESTRINI TEAM automatic CUTTING , END MILLING and DRILLING MACHINE machine for joining parts of chairs, living rooms, furniture, etc. the TEAM machine is made up of 3 operating units: 1st unit: circular saw for cutting workpieces to length 2nd unit: spindle moulder for milling 3rd unit: drilling unit with multiple center distance head . there are 9 work programs that can be choiceed and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . all units are operated by a hydraulic pump to obtain adjustable and smooth movements Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 - Boring unit . engine power Hp 3 . max. depth ...

Balemaster HL 160 – Air shredder system with feed belt, built in 2012 Specifications Manufacturer: Balemaster Europe Type: HL 160-Air Year of construction: 2012 Motor: 22 kW Feed width: 1600 mm Belt speed: 15 m/min Throughput: approx. 3.5 t/h Weight: approx. 4000 kg Material: corrugated cardboard, paper, cardboard boxes

5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED

SECOND-HAND 5 AXIS BALESTRINI IDEA 2 – CE RULES - X axis 1800 mm - Y axis 1600 mm - Z axis 700 mm - 4 x 7.5 air cooled Colombo spindles - NUM control. - 2 Pumps 75 mc/h Rietschle - YEAR 2007 - complete with cabin

SECOND-HAND OSCILLATING TWO BENCHES MORTISER MOD. BALESTRINI MICRON - CE RULES - volt. 380/50 - sn AF657 Y11 - year 1998

SECOND-HAND MULTIPLE H.F. OSCILLATING MORTISER BALESTRINI PRAGMA TOP - CE RULES - n. 5 +5 horizontal spindles - n. 2 + 2 vertical spindles - n. 3 horizontal oscillations - n. 2 vertical oscillations - control box

SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - positions 1-2 milling units - positions 3-4 milling units - positions 5-6 sanding units - positions 7-8 sanding units - positions 9-10 trasversal sanding units - working length mm. 2500 - working height mm. 180 - n. 10 pneumatic locking cylinders - SN 0 133 H2 - CE rules (year 2001)

ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO CN – CE RULES - max. horizontal tenon length 160 mm - max. vertical tenon length 100 mm - max. bench inclination 20° - inclination of workpiece support guides: 45° - production: 600/700 tenons per hour - spindle Ø 25 mm - benchs: dimensions 315x360 mm longitudinal axis inclination 0° ÷ -20° piece support guide adjustment 0° ÷ 45° - Numerical Control piece support guide adjustment 0° ÷ 45° axis movements 2 DC motors brushless” X axis stroke 600 mm Y axis stroke 200 mm X, Y axis speed 15 m/min. execution of programs in quick tasks program memory 1000 pcs. programming using macros - 9000 / 12000 rpm. - cutter motor power 4 hp - volts. 380/50 - year 2012 - CE Standards

min and max tenon width: 4-100 mm + thickness min and max tenon thickness: 4-30 mm min and max tenon depth: 6-80 mm Table adjustments: vertical: 120 mm horizontal: 60 mm front tilting: 20? scale fence on table for miter positioning: 45? cutter spindle motor: 3kw motor for drum rotation: 0,75kW rotation speed of drum adjustable

Description: • Double sided automatic tenoner with feeder • Serial number D227-C7 • Total installed power approx. 7.50 KW • Working length from approx. 180 mm up to approx. 1800 mm • Dimensions and inclination angles of the tenons: see photo number 35 • Tilting heads around the horizontal axis from -25 ° to +45 ° • Heads rotation around the vertical axis from -10 ° to +45 ° • Cutting shaft speed 9000 rpm • Each head has a motor with power 3 KW • Power opening motor 0.50 KW • BALESTRINI APS feeder Approx. Onsite Dimension. (l x w x h): 3,900 x 2,400 x 1,800 mm, weight approx.: 3,400 kg

Description: • Multi spindle slot mortiser • Serial number AC 256-T8 • 2  ,tables with dimensions 1000 x 220 mm each • Tables with adjustable height 120 mm and depth • 2 pneumatic clamp devices in each table • 5 horizontal independent oscillanting units working by 2 sides, motor power 0.50 KW-6000 rpm each • Head height adjustment 60 mm • Maximum tool diameter 16 mm • Frequency converter Approx. Onsite Dimension. (l x w x h): 1,800 x 1,650 x 1,550 mm, weight approx.: 1,300 kg

Description: 4-spindle copying lathe with aluminium template STANDARD EQUIPMENT 4 spindles for simultaneous copying of 4 workpieces Variable rotation with inverter Spindle drive with bronze gears and worm gear Centring devices for automatic workpiece positioning Pneumatic clamps Approach and moving away of cutter unit with pneumatic system Cutter carriage feed on rectified guides and recirculating ball pads Independent adjustment of cutter carriage feed and wood rotation Machine and electrical system complying with EC regulations TECHNICAL DATA Max. turning length mm 1100 Max. turning diameter mm 150 Cutter motor power V 380 / 50 - Kw 4 Spindle rotation motor power V 380 / 50 - Kw 0,75 Cutter carriage feed motor power V 380 / 50 - Kw 0,55 Tool holder diameter mm 145 Tool diameter mm 35 Variable carriage feed speed mm/min 0 ÷ 600 Variable spindle rotation speed r ...

Technical data: model: RMH 60 x 40 – T 100 or T - 150 machines dimensions without preloading box / side case box L x B x H / in metres 4.50 x 1.60 x 2.10 loading box dimensions: L x B x T / in cm: 130 x 60 x 61 parcel dimension in cm: 60 x 40 x material amount engine kW / volt: 15 / 400 or 22 / 400 mole lid pressure in T: 50 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T: 100 or 150 ground ram piston rod Durchmesser:220 mm working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 6600 control: by hand the RMH 60 x 40 metal press and scrap metal presses is likewise able to come with lateral hydraulic preloading box are delivered and also with different Press force in the ground ram, 100 metric tons and 150 metric tons.

Technical data: model: RMH DK 50 x 70 machines dimensions without preloading box / side case box L x B x H / in metres: 4.46 x 1.34 x 2.43 loading box dimensions L x B x T / in mm: 1.575 x 840 x 700 parcel dimension in cm: 50 x 70 x material amount engine kW / volt: 22 / 400 ground rams pressure in T: 100 working pressure in BAR: 240 Presszyklus/seconds: 75 weight in kg: 7300 control: By hand / Automatk all machines are delivered in the state kind equipment with hand lever control and oil cooler. Optionally with lateral preloading box and radio control available.

Model RMH 50 x 30 - 65 machines dimensions without preloading box / side case box L x B x H / in metres 4.10 x 1.40 x 1.95 loading box dimensions: L x B x T / in cm: 110 x 50 x 54 parcel dimension in cm: 50 x 30 x material amount engine kW / volt: 11 / 400 ///// Optionally with 22 kW / 400 mole lid pressure in T.: 40 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T 65 Optionally also with 100 or 150 metric tons press force ground ram piston rod diameter: 200 mms working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 4900 control: by hand optionally also with lateral preloading box available

THROW BAND / SPIN / BELT / DIRECT FROM THE MANUFACTURER! -Stable original cast band / belt / conveyor belt made of rubber, specially designed for baling presses (original quality) or many other applications in industry, agriculture, wood u.v.m.! -New, open reinforced, with mounted hook connectors in stainless steel, 2-ply top Supergrip profile, black, running side out fabric -suitable for CLAAS, Stockey & Schmitz and Welger P22/P23 -Name: EP 3-0 250/2, ceiling -Dimensions: length 2,040 mm x width 300 mm Shipping will be by UPS! On request, we can customize the conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. More transport and conveyor belts in all other sizes available immediately . We ship worldwide we deliver worldwide, pl ...

Max. bale dimensions: 700x490x730mm, bale weight: 40-60kg, length: 710mm, width: 1000mm, height: 1920mm, weight: 550kg.

Connected load: 15.5kW, weight: 6.8t.

Weight: 5.65t.

Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h.

Pressing force: 785kN, opening width: 1100mm, bale weight: 475-750kg, bale dimensions: 1100x750mm, max. output: 30t/h, motor power: 45kW, operational hours counter: 59,550h, with documentation, an on-site inspection is possible, the machine is located in Slovakia.

Pressing force: 30t, max. bale dimensions: 1525x800x1100mm, chamber width: 1520mm, chamber height: 560mm, bale weight cardboard/ plastic: 300-400/ 400-600kg, stroke: 1000mm, connected load: 4kW, weight: 1.78t, on-site inspection is possible.