bale press used for sale

Key data: 50 t, 1600 mm, 200 mm

CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

pressure: 3 t throat: 0 mm stroke: 200 mm total power requirement: 15 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t throat: 0 mm stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weigh ...

Vertical Multistage High Pressure Centrifugal Pump KSBTyp Movichrom N CN 3/10 2RFabr. Nr 1-P30-837561Nominal flow rate max. 3 m3/hNominal delivery head 70 meters = 7 barNominal speed 2900 rpm. Motor power 1.5 kWNet connection 400 volts, 50 Hz- pump structure in 10 stages- pump elements made of stainless steel, pump base made of cast iron connection flanges DN 32- suitable for drinking water supply, irrigation and drainageSpace requirement pump L x W x H 250 x 220 x 830 mmWeight 38 kgUnused replacement pump made of

Single-column eccentric press AMBOLD type PEEV 25.2Masch. No. 11734 / 02 Year of construction 2002Compressive force 25 ton. Projection 200 mmTable area 520 x 400 mmPlunger area 155 x 155 mmHole in table 185 x 155 mmStroke adjustment 4-80 mmPlunger adjustment 40 mmInstallation height max. 270 (largest stroke in UT, table below)Clamping pin hole 32 mmTable height adjustment approx. 150 mmPlunger strokes 160 strokes/min. Motor power 2.2 kWNet connection 400 volts, 50 Hz pneumatic clutch-brake combination

Double Column - Hydraulic Press RASTER ZEULENRODA (WALTER) Type WUP S 60Masch. No. 136 / 7 (156-165) Year of manufacture 1999Basic machine from 1987, in 1999 Overhauled with new controlPressure capacity 60 ton. Stand width 1090 mmStand passage laterally 265 mm (one-sided) Plunger area 650 x 300 mmAdditional plate on ram 990 x 550 x 60 mmTable area 990 x 550 mmPlunger stroke max. 320 mmInstallation height 330 or 390 mmTable height above floor 980 mmHydraulics Operating pressure 320 barRapid traverse downward 75

A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible.

pressure: 63 t passage width: 1350 mm stroke: 300 mm total power requirement: 16 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2,0 x 1,8 x 3,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible.

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible.

A Sahinler workshop press is available. Press pressure: 150t, max. pressure: 244bar, working width: 1520mm, piston stroke: 300mm, ram dimensions X/Y: 200mm/1520mm, through hole: 100mm, table dimensions X/Y: 600mm/1520mm, max. installation height: 610mm. Forward speed: 9mm/s, retraction speed: 10mm/s, working speed: 5mm/s, drive power: 11kW. Machine dimensions X/Y/Z: approx. 2500mm/1000mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible.

pressure: 10 t distance between columns: 500 mm stroke: 200 mm total power requirement: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible.

pressure: 125 t distance between columns: 1050 mm stroke: 250 mm total power requirement: 40 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible.

pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg.

pressure: 150 t Table dimensions: 1000 x 360 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Inclineable mechanical press with updated electrics (CE2004) and bolster plates. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800kN, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible.

pressure: 20 t stroke: 180 mm daylight between the columns: 540 x 100 mm dayligth: max. 990 mm : 72 mm diameter of piston: 48 mm weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A total of five Cannon foam systems are available. Materials: isocyanates and polyol, press plate dimensions X/Y: 720mm/650mm, lid opening angle: 100°, tilt angle: 60°, opening min./max.: 312mm/502mm, parallel stroke: 190mm, approach stroke: 95mm, press stroke: 95mm, ejector stroke: 75mm, control: PLC. Including material preparation. Documentation available. On-site inspection is possible.

COURTOY R292F Compressor Missing the 2 compressed descents and the cables between the electrical cabinet and the machine; All the documentation including the electrical diagrams is present (in French), Punch type: D, Weight (kg): 4500 , Cadence / hour: 43,000 - 350,000, Compression (kN): 100, Precompression (kN): 10, Maximum tablet dimensions (mm): 25,40, Die outer diameter (mm): 38,10, Matrix height (mm): 23,81, Punch diameter (mm): 25,40

pressure: 10 t stroke: 180 mm daylight between the columns: 335 x 115 mm dayligth: max. 340 mm : 56 mm diameter of piston: 40 mm weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,75 x 0,53 x 1,6 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t column daylight: 2600 mm stroke: 800 mm table surface area: 6000 x 3000 mm : max. 800 mm adjustment of press crosshead: 5200 mm slide adjustment -horizontal: 1800 mm Capacity: 162 l/min feed down: 9 mm/sec feed up: 14 mm/sec total power requirement: 45 kW weight of the machine ca.: 50 t - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton

Capacity: 60 ton Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton

Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton

Rotary tablet press for tableting single-layer tablets. Easy punch tool change, quick to clean, low noise operation. Including dust collector, tablet deduster and vacuum feeder. - Specifications: press tool: D | number of punch stations: 15 | max. speed of the machine in neutral: 77 cycles/minute (corresponds to approx. 69,000 tablets/hour) | max. tablet diameter: 25 mm | max. filling depth: 20 mm | max. precompression force: 12 kN | max. main compression force: 100 kN | product contact parts are made of stainless steel SUS 316L, chassis is made of stainless steel 304 | power consumption: 5.5 kW | machine dimensions: 660?690?1620 mm | weight: 675kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short d ...

Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton

Jörgensen tablet press type 075HK3, built in 1961, with accessories, poor condition

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton

Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5

For sale is a very well-preserved pressure tank of the Rieger brand: Specifications: - Manufacturer: Rieger Fluid Process - Max. operating overpressure: 3 bar - Capacity, 3,800 Ltr. - 2 pressure load cells available - Spray head available

Inv. Num. : 8437 Type: 50-VE Producer: IMS Created: 2002 Parameters: Compressive force: 50 t Maximum stroke rate per minute: 145 1/min Stroke: 80 mm Adjusting the ram: 75 mm Machine weight: 2300 kg

Two Illig punching machines are available for the precise punching of thermoformed plastic parts from film material. Working width: approx. 900mm, working height: approx. 120mm, roller diameter: approx. 196mm, machine dimensions X/Y/Z: approx. 2500mm/1300mm/1600mm, weight: approx. 750kg. Including two hydraulic punching machines Wolf EHPT 6E and two manual swivel arm punching machines. On-site inspection is possible.

Inv. Num. : 8438 Type: AF-200-75 Producer: Arisa Generated: Parameters: Maximum retraction speed: 200 t Top table length: 950 mm Top table width: 750 mm Maximum number of strokes: 20 1/min Ram stroke: 250 mm

Container Press SMC/CP 1100 Used Equipment Used device is kpt. reconditioned, wear parts were replaced, incl. oil change and new hydraulic hoses incl. UVV safety test and protocol, 6 months warranty Pressing force: 3.5 tons Swivel stroke: 95 degrees Connected load: 230 V/ 1.5 KW Machine dimensions: 980x 1190x 1900 mm WxDxH Machine weight: 250 kg

A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible.

Upstroke press Top lid can tilt open to allow mould to be (un)loaded Capacity: 150 ton Passage between uprights: 1850 mm Max ram adjustment: 500 mm Distance between table -- ram: 1000 mm Table area: 1800 x 1300 mm Height: 2350 mm

pressure: 25 t stroke: 250 mm table-size: 400 x 500 mm surface of ram: 200 x 500 mm weight of the machine ca.: 0,9 t dayligth: 400 mm distance between columns: 500 mm - Handspindelpresse, gebraucht Balancier, used Typ/ type: PSHZ 25/I Preßkraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgröße/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Gewicht/ weight: 0,9t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With Automatic Strip Feeder BBV 190 500 kN | 100–1120 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 500 kN Stroke rate: 100–1120 strokes per minute Working hours: 41000 h Main motor: 22 kW Control voltage: 24V DC Power connection: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 /44 / 51 mm Shut height adjustment: 64 mm Working Dimensions: Max tool installation width: 1100 mm Strip pass width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Strip entry height adjustable: 60–140 mm Max strip width: 120 mm Max feeding pitch: 85 mm Max material thickness: 4 mm Feeding angle: 180 Deg Machine Dimensions (with BBV 190): Machine footprint (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 1 ...

Specifications Maximum pressure: 75 tons Year of Make: 1999 Press force: 90.9 t/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1550 mm Bale weight: 500-750 kg Weight: approx. 25 tons Power connection: 400 V Bale tying: automatic Motor: 75 kW (possibility of switching to 55 or 45 kW) Press capacity at idle: max 750 m³ / hour Press capacity under operating conditions: max 350 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 12 tons/hour Theoretical throughput to density 60 kg/m3: approx. 21 tons/hour Theoretical throughput to density 100 kg/m3: approx. 33 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Cho ...

An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible.

Embossing press Baier GEBA 1/F, installation height 90 mm, printing capacity 800 kg, working size 10cm x 14 cm, year of construction 1973, machine number 73040, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Waste compactor - 3.5 t pressure

pressure: 250 t throat: 400 mm stroke: 30...140 mm table-size: 1000 x 750 mm hole in the table: 360 x 400 mm ram surface: 630 x 500 mm ram adjustment: 110 mm total power requirement: 18 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used piston press for apple juice production made by Bucher, model: HP 5000, capacity 5 t / h. New: 1985. 2 pieces available for general renovation (hydraulics) or for parts. Control cabinet available for 1 press.