128,639 used machines on RESALE, but how to find them? Machine Search
container volume: 600 l internal dimension: 1500 x 740 x 780 mm dimensions of the machine ca.: 1900 x 810 x 860 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
container volume: 600 l internal dimension: 1500 x 740 x 780 mm dimensions of the machine ca.: 1900 x 810 x 860 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pulling capacity: 32 kN : 20 m : 16 mm winch traction in steel case, as good as new pulling power with lever pipe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 10000 kg height of stroke: 130 mm Total height: 290 mm weight: 21 kg dimensions: 190 x 260 x 290 mm Hydraulic machine jack Foot height 22mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 5000 kg height of stroke: 120 mm Total height: 243 mm weight: 15 kg dimensions: 170 x 230 x 250 m Hydraulic machine jack Foot height 19mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 538 x 475 x 300 mm internal dimension: 450 x 448 x 300 mm material: verzinkt as good as new with some storage marks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 490x310x190 mm weight max. in kg: 20 kg Temperature range: -10° +50° °C Colour: grün RAL material: PST AU Lot storage stackable by lateral and rear tongue and groove can be connected to each other approx ca. 700 pieces in Stock Packing unit: Pallet Exception, for small quantities only if you pick them up yourself in Goldenstedt. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions: 900x 1200 mm Ideal as a floor for heavy duty shelving div. sizes available - 900x 1200mm - 1000x1100 mm - 1000x1200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight of the machine ca.: 14,2 kg dimensions of the machine ca.: 22 x 24 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125 m ...
roughness meter, Contour measuring device Manufacturer: Hommel Type: T 8000 Year of construction: 2005 Specification: DIN EN ISO 4287 Ra, Rz, RmaxRSm
Heidenhain ROD 800.0000 - 36000 Id.Nr. 298 466 06 Incremental angle encoders with self-bearing Series: ROD 800 System accuracy ± 1" Mechanically zul. Speed 1000 min–1 Interface: » 1 VSS Scope of supply: 1 piece Item condition: NEW More items - new and used - can be found in our shop! International shipping costs on request!
Automation SheetMaster ? Standard configuration ? Suction frame 3000 x 1500 mm ? Peeler cup ? Vacuum sensor ? Central lubrication ? Sheet thickness sensor for double sheet check ? Control TASC 100 ? Clamp closing automatically ? Peeling system ? Suction plate module GripMaster 3000 x 1500 mm ? GripMaster Standard / 1600 ? With the following configuration: ? GripMaster Standard ? Scissor table 400 mm ? Sheet skeleton grippers with sensor ? Scrap skeleton pallet tiltable, 3000 x 1500 mm ? SortMaster Box ? TooMaster with 40 stations ? Store interface ? Safety devices for connection to storage system incl. 1st light barrier circuit
Loading unit: LMZ 3050 suitable for: L3030 and L3050 Max. sheet size, load/unload: 3000 x 1500 mm Max. sheet thickness, unload: 20 mm Cycle time: 230 sec
Loading device LoadMaster including loading station with fanning magnets Loading Sheet size: 3000 mm x 1500 mm Min. sheet size : 1000 mm x 1000 mm Max. sheet thickness: 25 mm Max. sheet weight: 900 kg
Automation LiftMaster Compact Loading max. sheet format 3000 x 1500 mm min. sheet format 1000 x 1000 mm max. sheet thickness 25 mm max. sheet weight 900 kg Unloading min. parts size 150 x 150 mm max. sheet thickness 25 mm max. sheet weight 900 kg Basic system incl. synchronous loader, peeling device, measuring device for thick sheets, movable unloading rake, incl. loading / unpacking station Basic configuration: ? synchronous loader ? peeling device ? measuring device for thick sheets ? movable unloading rake ? raw material unpacking station ? maximal stack height on loading side is 90 mm ? maximal stack height on unloading side is 250 mm LiftMaster Compact options ? Additional pallet for finished parts ? Separation of thin sheets (s=1-2 mm) ? Scraper for slats (cleaning brush) ? Storage interface
Standard configuration Basic system incl. peeling device and measuring device for sheet thickness Max. sheet weight 900 kg Loading Max. sheet size 3000 x 1500 mm Min. sheet size 1000 x 1000 mm Max. sheet thickness 25 mm Unloading Min. part size 150 x 150 mm Max. sheet thickness 20 mm ? Installation symmetrical ? WITHOUT loading station
Properties: Condition: fully functional, with traces of use Ideal for fast material transport Expertly dismantled and packed Manufacturer: Soco System Condition: Used Model/Type: Roles Drive type: Gravity System consisting of: 7 segments (5 x 1,980 mm, 2 x 960 mm) Total length: approx. 11,820 mm Total width: approx. 470 mm Conveying width/roll width: approx. 410 mm Segment length: approx. 1,980 mm Roll diameter: approx. 50 mm/plastic rolls Axle distance: approx. 90 mm (adjustable) Material: Steel/plastic Information about the frame: Height: approx. 100 mm Width: approx. 25 mm Stock: 11.82 meters Price per meter Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined co ...
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Material: Steel Length of the elements: approx. 2000 mm, approx. 2500 mm, approx. 3000 mm Total length: approx. 1200 meters overall width: approx. 530 mm Conveyor width/roller width: approx. 495 mm/ approx. 505 mm Roll cross-section: approx. 80 mm Wheelbase: approx. 200 mm Colour: Green & Grey Frame height: approx. 80 mm Frame thickness: approx. 05 mm Drive Type: Gravity Available from August 2023 1200 meters in stock Price per meter Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading ...
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Material: Steel Length of the elements: approx. 2000 mm, approx. 2500 mm, approx. 3000 mm Total length: approx. 1200 meters overall width: approx. 530 mm Conveyor width/roller width: approx. 495 mm/ approx. 505 mm Roll cross-section: approx. 80 mm Wheelbase: approx. 200 mm Colour: Green & Grey Frame height: approx. 80 mm Frame thickness: approx. 05 mm Drive Type: Gravity Available from August 2023 1200 meters in stock Price per meter Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are ...
Tool pressetter Needs new computer and software Estimated price 2022 from producer € 4500,--
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Smugglers/smugglers conveyor technology Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 1790 mm Total width inside: approx. 2300 mm Conveying width incl. motor: approx. 800 mm Conveying width without motor: approx. 710 mm Roller spacing/ axle spacing: 120/65 mm Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (037 KW) Includes side guide Feet to be ordered separately. In stock: 1 Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made soluti ...
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor technology/ rollers Manufacturer: AMI Fördertechnik Year of construction: 2013 Condition: Used Drive type: Flat belt Total length: approx. 3800 mm Total width incl. motor: approx. 850 mm Total width without motor: approx. 690 mm Conveying width: approx. 600 mm Wheels/axle distance: approx. 65 mm Roll diameter: approx. 50 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 40 mm Including 2 SEW motors (0.37 KW) In stock: 2 pieces Price per meter The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics F ...
- Total installed power 29.60 KW. - Part width from 205 mm to 3200 mm. - Piece length from 100 mm to 1200 mm. - Part thickness from 10 mm to 70 mm. - Belt feed, feed speed 52 m/min. - 2 loading arms with belt feed of approx. 670 mm length. - 2 unloading arms with belt feed of approx. 315mm length. - Distance between drill bits: 32 mm. - Drill bit rotation speed 4000 rpm. - 1 x horizontal drilling group working from the right side with 20 drill bits. - 1 x horizontal drilling group working from the left side with 20 drill bits. - 2.20 KW-2700 rpm motor in each horizontal group. - 5 x vertical drilling groups working from below, 2 rotating heads 0°-90° in each group, 10 drill bits each head, 1.32 KW-2700 rpm motor in each head. - 2 x vertical drilling groups working from above, 2 heads each group, 10 drill bits each head, 1.32 KW-2700 rpm motor on each head. - Minimum drill ...
Specifications: SEW Movigear Drive Motors/ Motor Quantity: 11 pieces available Manufacturer: SEW Eurodrive Condition: good (used) Power: 50Hz/
Environmental box BRB storage technology green, size 1200x800x900 mm Auction-ID: A7-45677-111
Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt incl. substructure Horizontal range 5,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Scalloped edge: 80x50mm flush with both sides 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is curr ...
Capacity approx. 3200 pcs/h Auction-ID: A7-45702-7
maximum number of results exceeded
please refine your search
650 € 
