126,702 used machines on RESALE, but how to find them? Machine Search
used
1 of used high-seeed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-H, new 2013. Operating side: right. Used for beverage cans diameter 66 and 58 mm in various collations. Siemens S7 PLC with MI-servo controls. Gas-fired shrinktunnel (can be converted to electrical).
1 of used medium-speed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-M, new 2013. Operating side: left. Used for 500 ml PET bottles in various collations at a maximum speed of 70 cycles per minute (depending on format). Siemens S7 PLC with MI-servo controls. Electrically heated shrinktunnel.
Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible.
Used microfiltration made by Intermasz type MF 1137231178 UNT. New 2013. Milk and whey microfiltration installation. Capacity: 10,000 l/h. Filtration area: 13 m³. Weight: 950 kg.
PNEUMATIC TRANSFER PRESSES - HEAT PRESS FOR T-SHIRT PRINTING – INTRON COPY PRESS 300 220 070 Sr. No.: 9304 0392 Equipment / Additional information: Professional shirt / cardboard and press for various things that need printing
- Multi-Tasking Machining in a Single Machine Setup - Sub spindle for overtaking with full C-Axis - The INTEGREX IV series can finish all machining processes. - High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. - Lower turret with rotary tool spindle so livew tooling - Chip conveyor with coolant and 15 Bar iKZ - Double chuck KNCS-N 210-53 SMW Autoblock - MAZAK Flex -GL150F Gantry Loader - Gripping range 200 x 120 length x 15 Kg
- 3 rolls driven Servo - Torq each roller 3500 nM - Electrically support rolls - Intelligent software : - Ellipse program - U Bend shapes - control of tangents - Auto section detector
A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...
Manufacturer: ELITechGroup Model: InGenius Type of Machine : PCR machine ELITe InGenius® is an easy-to-use sample-to-result solution dedicated to Molecular Diagnostics which integrates extraction, amplification and result interpretation with an unprecedented flexibility and assay menu possibility. ELITe InGenius® processes 1 to 12 samples in parallel and independent tracks. It features a universal extraction process with multiple and independent PCR enabling the laboratories to create and run custom panels of assays on demand. ELITe InGenius® offers laboratories an unlimited menu capability, combining the largest CE-IVD infectious disease menu available on a sample-to-result instrument, with a real open capability. Benefits - Full Automation - Bench-top instrument integrating all the steps of molecular diagnostics: automated nucleic acid extraction, real-time PCR amplification, a ...
Manufacturer: Index Model:MS 25 M Year of Manufacture: 1990 Type of Machine : Lathe, 6 Spindles - Main spindle: 25 mm - Drive: Mechanical - Features & Equipment: - Bar loader (IEMCA) - Pallet changer - Chip conveyor - Driven tools - Additional accessories included Condition: Used, in good working order. Find more here - / Contact us at -
EREMA INTAREMA 906 TE ECO SAVE, construction year: 2017, Throughput rate up to 240 kg/h depending on materials and feeding rate, installed power 110,5 kw, Presently used for PE and PP, compact line including:, loading conveyor belt 6 m.long, 500 m wide, metal detector, Reel feeding unit RZ 50P, compacting unit, extruder with screw Ø 65 mm., 45 kw drive, double degassing unit, Non-stop, double Screen changer: Erema SW 2 134 RTF, water ring pelletizer HG 84 D, Drying centrifuge: GGT 75 A, Water pump, vibro-classifier for granule type GS 1510, Pellet transport system, Double big bag filling station, installed power - used power in work: about 60-65% : 110,5 kw, availability: immediate, options available: mixing-cooling silo, capacity: up to 240 kg/h, conditions: very good, type: compact line from scraps to granule
Tool milling machine Manufacturer: INFRATIREA, Type: FUS-32, built in 1988 Specifications: Table 950 x 450 mm Travel X / Y / Z: 500 / 320 / 400 mm Spindle speeds 25 - 2000 rpm with digital display
2 pieces Revolver automatic lathes, Fabr. Index, Type OR with many accessories Specification: Largest diameter 12 mm Number of spindles 6 Number of spindle speeds: 10 pieces Minimum spindle speed 950 1/min Maximum rotation speed of the spindle 7500 1/min Weight of the machine 1 t (for more data see nameplate)
Indramat DDS02.2-W100-BE12-01-FW Digital AC Servo Controller DDS02.2-W100-BE12-01-FW Indramat Digital AC Servo Controller 100A Cooling Type: Air More items - new and used - can be found in our shop! International shipping costs on request!
1x INDEX ER25 (built in 1974) with milling device (IRCO bar feeder with weight feed) 3x INDEX 25 (model years 1973-76) 4x INDEX C29 (years 1970-81) 3x INDEX DG12 (years 1972-75) 1x INDEX DG20 (built in 1972/73)
A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.
Height=0.96 m, Overall length= 1.2 m, Overall width= 1.2 m, Net weight= 120 kg,
Height=1.22 m, Overall length= 0.57 m, Overall width= 1.03 m, Net weight= 155 kg,
Height=1.88 m, Overall length= 0.7 m, Overall width= 3.25 m, Net weight= 850 kg,
Height=2.09 m, Overall length= 1.08 m, Overall width= 2.25 m, Net weight= 1610 kg,
Qty. 1 Second-hand extrusion press line Mfc.: Breda Sutton, Cometal, OMS Type: oil hydraulic, Dia.: 7 inch, 178 mm Force: 1600 MT Built: 1977 Fully reconditioned in 1995 Scope of supply: Log feeder Billet Furnace Hot Shear Extrusion Press Run-out Table Puller Cooling Bed Stretcher Finishing saw Aging Furnace Die Furnace
Like NEW! Never used Inductive hardening machine for bolts M8 and M10 with year of manufacture 2019 The equipment is designed for automatic inductive hardening of screws and bolts M8 and M10. The plant was built by the company Grimm Zuführtechnik. It is designed for approx. 70-80 parts per minute (depending on the component) and has various monitoring options (temperatures, component heights, component types, rotation, etc.). The components are conveyed from a hopper belt via a steep conveyor to a linear sorter and from there are separated and transferred to an 8-station indexing table with 2 nests per station. A 50kW HF generator from IDEA is connected, which provides further monitoring (energy quantity, earth fault monitoring, flow quantity and water temperature of the inductor, etc.). The plant has its own tank for quenching water, from which the components are transported out ...
A fully automatic SPEA bed-of-nails in-circuit tester for SMEMA production lines is available. Type: inline ICT tester, slots: 2x768/Core, conveyor width range: 50mm-380mm, conveyor length: 450mm, resistance measurement range: 1mΩ-1GΩ, capacitance measurement range: 0.5pF-1F, inductance measurement range: 1µH-1H, dimensions X/Y/Z: approx. 900mm/1000mm/1750mm. Including various feeders (8x2-56). Documentation available. An on-site inspection is possible.
SPECIFICATIONS Free Air Delivery 70.7cfm/2002lpm Pump 3000 cast iron NO. of Cylinders 3 Compression Stages 3 Free Speed (rpm) 780 Oil Limit alert Switch STANDARD Auto Condense Drain NO Motor Size 15kw/20hp Power Type 415v 50Hz electric Engine N/A Drive Type Belt Working Pressure 175psi/1200kpa Starter Star Delta Starter Constant/ Dual Controls STANDARD Centrifugal Unloader STANDARD Air Tank Capacity (L) 445L Mounted Type Tank Mounted Weight (kgs) 750 Dimensions Lxlxh (mm) 1900x1100x1540 NOise Level dB(A)1m 86.2
EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg
x-travel: 550 mm y-travel: 400 mm z-travel: 400 mm Control: INGERSOLL ANDRONIC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used INTAMSYS FUNMAT PRO 410 â high-performance 3D printer for engineering plastics, Industrial quality at an attractive used price, For sale is a used INTAMSYS FUNMAT PRO 410, an industrial high-temperature 3D printer for additive manufacturing with sophisticated technical materials such as PEEK, ULTEMâ¢, PPSU, PC, PA, ABS and many more., The printer is fully functional, has been regularly serviced, and is in very good condition. Ideal for use in the Aerospace, automotive, medical technology, research and development,, ---------------------------------------------------------------, Highlights of the FUNMAT PRO 410:, - Dual extrusion system: Two nozzles for complex geometries, support materials and multi-material printing., - High temperature pressure: Nozzle temperature up to 500°C â perfect for high-performance thermoplastics., - Large installation space: 305 à 305 ...
Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from the manufacturer Ingersoll Rand – model TS3A, built in 2008. Technical features: Max Air Pressure: 175 psig (12 bar) Max. Air Inlet Temperature: 60 °C (140 °F) Cooling System: Air-cooled Operating Voltage: 400V/3Ph/50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant Oil Type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
Used head machine / dough divider KÖNIG, Type: Rex Industrie II - I-Rex 8 / 6 / 5 rows - Own integrated control system for individual operation - Weight range: up to 110 g Visits and test runs are possible by arrangement.
Control Mazatrol 640 MT Pro Max. Rotary Diameter 660 mm Max. turning length 1,045 mm Travel X1 axis: 580 mm X2 axis: 150 mm Y-axis: 160 mm Z1 axle: 1,045 mm Z2 axis: 1,010 mm W-axis: 1,050 mm B-axis: -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 22 kW Max. spindle speed 4,600 rpm C-axis Sub-spindle Drive power: 18.5 kW Max. spindle speed 5,000 rpm C-axis Milling spindle Drive power: 18.5 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 40 tool positions Max. tool diameter: 90/125 mm Max. tool length: 300 mm Max. tool weight: 10 kg lower turret Drum turret 9 tool stations Special equipment Conveyor Tooleye 15 bar high pressure pump Milling spindle synchronized threading 5-axis simultaneous machining Preparation for multiple and flash tool holders Interface for ...
used
Hindenlang TPESM-600 - Induction oven Max temperature: 850° Capacity: 500 kg Voltage: 400 V
Technical data: Printing width: 600 mm Colors: 4 Chamber doctor blade units: 3 Application: Inline with bag-making machine Condition: used Features: • Manufactured by Windmöller & Hölscher (W&H) • Designed for inline use with bag-making equipment • 3 chambers with doctor blades for precise ink transfer • Compact, robust construction for easy integration • Ideal for retrofitting or adding inline print capability
used
Hindenlang TPESM-600 - Induction oven Max temperature: 850° Capacity: 500 kg Voltage: 400 V
Hindenlang TPESM-600 - Induction oven Max temperature: 850° Capacity: 500 kg Voltage: 400 V
Hindenlang TPESM-600 - Induction oven Max temperature: 850° Capacity: 500 kg Voltage: 400 V
Offer 25311 Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 /min - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Footswitch - Space requirement approx. W 1300 x H 1250 x D 1300 mm - Weight approx. 800 kg - Mobile undercarriage
Key data: 200 mm, 400 mm, 6000 1/min
Machine Manufacturer: Index-Werke KG, Esslingen Machine: CNC lathe Index G 200 Compact Machines Year of Make:2001 Availability: in advance. from CW47/2025
Key data: 637 KW, 1500 1/min
Natural gas operation Engine block incl. crankshaft, camshaft, pistons, connecting rods, wheel drive, vibration damper, turbocharger console
50,000 litre underground tank - brand new - according to DIN-EN 12285-1, single-walled, raw inside, professional insulation on the outside. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank has a DN 600 manhole with dome cover, screws and seal. Containers from the factory, freely charged. On request, the tank can be completely equipped with a fire water suction connection, the tank then meets the requirements of DIN 14230 - underground fire water tanks: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction pipe DN125 made of stainless steel - V2A, with Storz A fixed coupling and Storz A blind coupling, - 1 pcs DN100 vent pipe with stainless steel hood - V2A, - 1 piece anti-vortex plate mounted on suction line, - 1 sign "Extinguishing water extraction point", - 1 pc. soun ...
I am selling an automatic CNC machining center for BLOCK-HOUSE production Hundegger K2i built in 2011. Almost new machine. Built in 2015. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360° rotation, servo-hydraulic inclination 0–65° Universal 5-axis unit with round milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill Combination holder for at least 5 tools with horizontal drilling device up to 2.5–3.0 kW power, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum machining depth 300 mm Combination holder for at least 5 tools with horizontal drilling device up to 2.5–3.0 kW power, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum machining depth 300 mm Positioning and clamping of the workpiece by means of gripper arms. While the workpiece is measured and transported to the d ...
Key data: 664 KW, 830 kVA, 400 V
Running hours 60,000
Manufacturer: Leica Model: INS 3000 Year of Manufacture: 2001 Electrical Specifications: - Voltage: 115/230V AC - Frequency: 60/50 Hz - Current (I max): 10 A - AIC of Overcurrent Protection Provided: 50 kA - Number of Phases: 1 Laser Classification: Laser Class 1 CE Marked : YES Condition : Good Find more here - / Contact us at -
X-ray accident investigation workstation available for sale. The Bucky workstation shown in the photos is included. The generator and the two measuring chambers in the table and wall-mounted grid stand are not included. Included components: - Ceiling-mounted tripod with X-ray tube, depth stop, and control arm - X-ray table - X-ray stand (lung stand) Additional items for sale: - 9 mobile stands (including stands for Philips MP 40 monitors with X3) - 5 boxes, each containing 2 gas cylinder holders for Evita V300/V500/V600 ventilators - 1 bed scale (Seca) (as new) - 1 wheelchair scale (Seca) (as new) - 1 Manujet III (VBM Medizintechnik) - 1 Microspeed uni (Aesculap) - 1 TruLight 1000 examination light (Trumpf) (very good condition) - 1 hemodynamic monitor PICCO - 1 Leon Plus anesthesia machine Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
