ba used for sale

Direct current, gear motor -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank -Content: 11.5 ltr -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg

Control panel, injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press -Hydraulic control block comes from: an injection molding machine -Manufacturer: Battenfeld -Dimensions: 380/180/H300 mm -Weight: 17 kg

Platesetter BASF EF III; good condition; cleaned and tested; Format 900x1200mm; pre- and main exposure; Post-exposure; dryer; Radiator. Exposure unit BASF EF III; good condition; cleaned and checked; size 900x1200mm; before and normal exposure; postexposure; dryer; Chiller.

Standard equipment: robust, high-quality and inclined rotary hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop infinitely variable speed control Connection cable with SCHUCO plug (1.2 m) Undervoltage outlets Drilling protection with electr. Hedge thermal overload protection Emergency Stop Impact Button Weight in kg: 44 Motor kW: 0,45 AC 230 V Speed 1/min: 250-3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Projection 220 mm - Saeulen diameter 70 mm - usable table area (W x L) 300 x 250 mm - T-groove size number 2, distance 100 mm Dimensions width 14/26 mm - Spindle B 16 - Speed display digital - Drilling depth display: scale - Drill depth stop: quickly adjustable stop ring - Feed: by hand - FACTORY WARRANTY: 3 years - free domicile incl. packa ...

Electric motor, three-phase motor -Power: 0.3 kW -Speed: 1330 rpm -Construction: B14 -Protection class: IP 65 -Dimensions: 247/140/H200 mm -Weight: 7 kg

Available in stock 1 x Used Fuel Injector Nozzle Tester (400 bar). The equipment is used but in good working conditions.

Available in stock 1 x Used 1000 bar Two Stage Hydraulic Hand Pump with hose. The equipment is used but in good working conditions.

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Dimensions: 330/220/H170 mm -Weight: 9 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 955 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 380/265/H230 mm -Weight: 43 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

BATES Fully automatic valve bag filling, Thermal valve welding, 140 – 180 bags / hour (25 kg, 50 kg), food/non-food, refurbished, like new Description SPECIFICATIONS Valve bag filling, manufacturer Bates, year of construction 1992. The system is designed for the bagging of dry, fine powder in valve bags, whose valve width V = 135 mm (clear width). Since all parts in contact with the product are made of stainless steel, this system is suitable for both the food and non-food sectors. (From a purely technical point of view, ATEX is also fulfilled – but there is NO longer any guarantee for this.) Depending on the product and its characteristics, the production capacity of 25.0 kg bags is approx. 140 – 180 bags/hour. Of course, the system can also process 50.0 kg bags. The offered installation consists of several components: 1. 60FFED fully automatic filling machine  ...

Bottle Filler, make WüMa, typ: BAD 20/4, with 20-valve pressure filler and 4-head crown capper, built 1977

Electric motor, three-phase motor -Foot defective, see photo -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

Double hydraulic pump, oil pump, gear pump -Engine power: 11 kW at 1440 rpm -Pump: Ostrta A 16 -Nominal pressure: 160 bar -Flow rate: 16 l/min -Protection class: IP 44 -Dimensions: 670/290/H335 mm -Weight: 99 kg

Three-phase motor, electric motor -Power: 24 kW -Speed: 1480 rpm -Shaft: Ø 55 x 105 mm -Design: B3 -Protection class: IP 55 -Number: 3x motors available -Price: per piece -Dimensions: 760/500/H390 mm -Weight: 251 kg

Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.25 kW -Design: B5 -Shaft: Ø 25 x 60 mm -Bolt circle: 130 mm -Recess: 110 mm -Protection class: IP 55 -Dimensions: 400/160/H220 mm -Weight: 17 kg

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMD 101/120 -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg

Used press for pre-pressing cheese. Technical data: - producer TEWES BIS Barczewo - year of production 2006 - dimensions: overall length 4780 mm, width 1560 mm, height 3850 mm - pressing area 4.33 m3 - internal dimensions of the bath: length 3700 mm, width 1170 mm, depth 730 mm - mass of pressed cheese approx. 1000 kg - thickness of the cheese layer after pressing approx. 250 mm

Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control: UNILOG B4 Clamping force: 13000 kN Year of construction: 2005 Technical data closing page: Drive type: fully hydraulic Closing type: Full hydraulics Type: four-spar Clamping force: 13000 kN Tie bar size h: 1600 mm Tie bar size v: 1250 mm Panel size h: 2220 mm Panel size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm plate spacing max.: 3850 mm Opening distance: 2850 mm Ejector stroke: 350 mm Ejector force: 165 kN Centering movable plate D: 315 mm Centering fixed plate D: 315 mm Technical data spray side: Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1630 bar Screw length: 22 l/d Plasticizing current: 144 g/s PS The technical data of the 2nd injection unit are as follows: Injection unit II 7700 Screw diameter 100 mm, Specific spray pressure 1960 ...

new ! all stainless steel closed lid with seal 2 mixing directions (manual or automatic) CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm Perfectly suitable for dry products, such as: spices, ingredients, powders, granulates, nuts, grains, seeds, kernels, dried fruit, Granola, ..

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 250 mm -Short taper mount for: bayonet disc mounting, taper size 8, bolt circle Ø 171.4 mm -Weight: 17 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 112/224 rpm -Power: 0.5/0.7 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 400/220/H205 mm -Weight: 23 kg

Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: Ø 300 mm -Short taper mount for: bayonet disc attachment, taper size 6, -Bolt circle: Ø 133.4 mm -Quantity: 1x disc available -Weight: 20 kg

Dear customers currently we offer you a used and very massive tape saw of the brand Bäuerle. Here are some technical data of the machine: Work table: 1,000 x 820 mm Cutting width: 765 mm Super cutting height: 520 mm Table swivel: 45° Roll diameter: 800 mm Power: 3 kW Speed: 1,400 rpm Dimensions: 1,500 x 820 x 2,500 mm Weight: approx. 900 kg All information without guarantee! VAT will be shown separately on the invoice. Shipping possible against surcharge. No guarantee and/or warranty on used machinery and accessories. If you have any questions, please do not hesitate to contact us.

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 300 mm -Short taper mount for: bayonet disc mounting, cone size 8, bolt circle Ø 171.4 mm -Weight: 30 kg

Multipli with pheumatic bow feeder , compresser, double sheet control , 2 pockets

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 3000 rpm -Power: 2 kW -Design: B5 -Shaft diameter: Ø 19 mm -Number: 2 motors available -Price: per piece -Dimensions: 500/165/H210 mm -Weight: 9.2 kg

Multiple limit switches, buttons, limit switches -Type: BNS519-B5D16-100-1 -Price: per piece -Number: 2x available -Dimensions: 170/120/H107 mm -Weight: 2.9 kg

Gear motor, electric motor -Speed: 99 rpm -Power: 0.11 kW -Construction: B5 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Number: 1x gear motors available -Price: per piece -Dimensions: 300/145/H130 mm -Weight: 5.3 kg

Power converter, power supply, power supply unit, servo power unit -Manufacturer: Baumüller -Type: BUS21-15/30-30-001 -Quantity: 1 available -Dimensions: 400/55/H310 mm -Weight: 4.9 kg

Bread slicer Treif Diskus 400 Bäko Line circular knife -Circular knife bread slicer Treif Diskus 400 -with new knife -digital control - Cutting width adjustable from 3mm to 15mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Rated power 0.9 kW - Years of construction 2007 to 2012 External dimensions : width 80cm depth 70cm height 112cm

Inductive sensor, electronics sensor -Ø: 6.5 -Connector: M8 -Connection: 10-30 V DC -PNP -36 mm: long -Switching distance: 2 mm -Stainless -Number: 2x available -Price: per piece -Weight: 5 g

Absolute encoder -Hollow shaft: Ø 12 mm -Dimensions: 80/85/H60 mm -Weight: 0.5 kg

Power: 5,5 KW Receiver: 50 L weight of the machine ca.: 0,450 t dimensions of the machine ca.: . m feed pressure: 330 bar liter capacity: . l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 395/210/H190 mm -Weight: 7 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 685 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 375/270/H250 mm -Weight: 41 kg

Identification system -Type: BIS F-403 -Voltage: 24 V DC -Dimensions: 130/175/H45 mm -Weight: 0.55 kg

Three-phase motor, electric motor -Power: 1.1/1.6 kW -Speed: 1400/2800 rpm -Shaft: Ø 25 mm -Construction: B3 -Protection class: - -Dimensions: 350/290/H260 mm -Weight: 42 kg

Gear motor, electric motor -Speed: 9.7 rpm -Power: 0.37 kW -Construction: B5 -Brake: 24 V DC -Diameter shaft Ø 40 mm -Protection class: IP 65 -Number: 1x available -Dimensions: 690/300/H230 mm -Weight: 52 kg

UPW 25x100 Thread rolling machine Available 2 machines. Pressure 25TONS Max. Workpiece Diameter 100mm Min. Workpiece Diameter 10mm Thread Length at Plunge Operation 180mm Thread Length at Continuous Operation 2000mm/80mm Distance Of Roll Spindles 150/325mm Length Of Roll Spindle Fixtures 180mm Dia. Of Rolling Tool 230mm Roll Spindle Turning Speed Range 20-90 U/Min Shaft Dia 63mm Weight 3,25 tons

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 13.8 rpm -Power: 0.025 kW -Construction: B5 angle -Diameter shaft: 14 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 260/115/H155 mm -Weight: 5 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor -Motor power: 5.5 kW -Speed: 1435 rpm -Hydraulic pump -Max. Pressure: 60 bar -Liter output: 50 l/min -Dimensions: 720/640/H700 mm -Weight: 145 kg

Gear motor, electric motor -Speed: 55 rpm -Power: 0.18 kW -Brake: 24 V -Construction: B5 -Diameter shaft: Ø 17 mm -Protection class: IP 65 -Dimensions: 395/185/H140 mm -Weight: 12.8 kg

Gear motor, electric motor -Speed: 32.5 rpm -Power: 0.37 kW -Brake: 415 V -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Dimensions: 465/195/H150 mm -Weight: 17.7 kg

Gear motor, electric motor -Speed: 31.5 rpm -Power: 0.25 kW -Construction: B5 angle -Brake: 415 V -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 445/190/H140 mm -Weight: 16 kg

Ref. 444_2 BASF nyloprint Dryer for Nyloprint plates Serial: 263 35 + 80° Functioning

Gear motor, electric motor, three-phase motor -Speed: 45.5 rpm -Power: 0.18 kW -Brake: 24 V -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 430/200/H140 mm -Weight: 15.1 kg

Gear motor, electric motor -Speed: 85 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 410/200/H205 mm -Weight: 17.4 kg

Gear motor, electric motor -Speed: 37/74 rpm -Power: 0.2/0.4 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 1x available -Dimensions: 345/200/H185 mm -Weight: 14 kg