ba used for sale

Manufacturer: Grundfos Number: 3 Model: NBE 50-160/167 A-F-A-BAQE Built: 2008 Rated flow current: 87.4 m3/h Nominal head: 32.6 m Speed: 2900 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Manufacturer: Grundfos Number: 3 Model: NBE 65-160/173 A-F-A-BAQE Built: 2008 Rated flow current: 126.9 m3/h Nominal head: 33.4 m Speed: 2910 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 15 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

MTU 16V4000 M 90 A BANK 2930-12-378-7717 5260981120

MTU 16V4000 M 90 B BANK 2930-12-378-7720 5260981120

No.: 851275 with speed-controlled feed pump Funnel in Exx protection with switchgear good condition Dimensions LWH: 700 x 700 x 700 mm Weight: approx. 100 kg

n1-n2= 50-2000 rpm 220 V 50 Hz Dimensions LWH: 300 x 300 x 90 mm

- Battenfeld Unilog 4000 display - Battenfeld Unilog 4000 claviatura - Battenfeld Unilog 4000 TFU 400 card - Battenfeld Unilog 4000 rack - Battenfeld Unilog 4000 CPST 203 card - Battenfeld Unilog 4000 CPEA 200 card - Battenfeld Unilog 4000 ELIF 400 card - Battenfeld Unilog 4000 CC10 card - Battenfeld Unilog 4000 SNT 411 power supply - Battenfeld Unilog 4000 UTR 300 card

CATALOG NO. 7166 TECHNICAL DATA - loading hopper inlet 810x630mm - rotor working width 620mm - main engine 18.5kW - pump motor 0.75kW - number of knives 30 pcs - knife dimensions 30x30mm - 41mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1800x1170x2000mm - weight approximately 1500 kg ADVANTAGES – German production – like WEIMA WL4 – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 47900 PLN Net price: 10644 EUR depending on the price 4.50 EUR Net price: 12605 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer ...

The scope of delivery includes: 01x Stacking crate / Euro container, used Manufacturer: Bekuplast Type designation: Basicline Material colour: grey Product dimensions: 600 x 400 x 320 mm (LxWxH) Internal dimensions: 567 x 367 x 317 mm (LxWxH) Volume: 64.5 l Weight: approx. 2.28 kg / pcs. Material: Polypropylene Handles: closed Front wall: foldable on one side Side version: closed Bottom finish: smooth, closed Note: -Insensitive to acids and alkalis -Cold and heat resistant It is a second-hand item, there may be scratches, dents and traces of use exist. The price shown is the same as the pick-up price incl. VAT per piece! General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which can be queried separately depending on the place ...

Forklift attachments Snow sliders with rubber scrapers Quick pick-up with the fork tines Clearing shield 2-fold to the left and right adjustable Spring folding hatches and scraper screwed on Securing against unintentional slipping Shield width: approx. 2000 mm Shield height: approx. 400 mm Fork cross section: approx. 120 x 50 mm Fork distance: approx. 540 mm All information without guarantee

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

Mono-plate system Material:PE, PP, PS, ABS. Built: 1985, last modification: 2003 Screw diameter: 100 mm, L/D 36 Extruder with degassing, vacuum pump, melt pump, hydr. Screen changer, nozzle 1350 x 1.0 - 6.0 mm, 3 rolls smoothing unit 1350 x x 350 mm with single drives, 3 temperature control units for roller temperature control, cooling section, side cut, printwith 2 rubber rollers, top and bottom protective foil lamination, cross saw 1,350 mm, switch cabinets with air conditioning, separate control panel

For the gentle preservation of liquid foods with and without carbon dioxide in pre-filled bottles. Depending on the shape of the bottle, between 60-120l/h is possible, control to the desired product temperature or by means of a timer. ccbo2hk Gas spring-supported basin cover, full insulation, on castors with storage compartment, can be used in a wide variety of bottle shapes (milk bottles, beer bottles, preserving jars, etc.), dry-run protection, heat-up phase approx. 1h (20°-90°), standard with perforated metal base, heat holding time adjustable (0-99 min) Specifications: Water capacity ~115 l Weight 143 (= empty weight) kg Height 1 090 (= working height) mm Width 705 mm Length 1080 mm Electrical fuse 16 A Electrical connection 400V 50Hz (3 phases) Electrical power 9.15 kW Nominal capacity l/h up to 120 l/h

Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.

Clocked working machine for fully automatic sealing of round, flat and mould objects made of glass, plastic or metal with up to two different types of closure. Rubber plugs, drip inserts, screw and pilferproof and flange caps can be easily machined. Power: up to 4200 units/h.

Key data: 800 KW, 1000 kVA, 400 V

ENGINE: 12M33D900E310NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 1000kVA) / 800(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 7500kg DIMENSIONS L/W/HEIGHT (MM): 550020002100 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full a ...

Material: PE, PP, PS // DC motor: 132 kW, power: approx. 300 - 500 KG/hr, screw 90mm, L/D30, strand nozzle, water bath, strand granulator.

Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr

Hot counter + refrigerated counter on undertable with casters Dimensions undertable: H95 x W193 x D76 cm Hot Counter BETEC Execution: Hot counter GN 2/1 230V / 50 Hz Heat output up to 90°C the hot counters are lit up Total dimensions: H55 x W75 x D78 cm Year of Make: 2019 Chilled distribution depot: Bartscher Batida 2/1 Refrigerated display case / cold counter 2 x GN 1/1 with squared glass version 406051 This refrigerated display case / show display case from Bartscher is a guarantee for your good product presentation. Dimensions (W/D/H) cm: 75 x 77.5 x 60 cm Weight: 78.6 kg Capacity: 1 x GN 1/1-6.5 cm height (53x32.5cm) Technical services: Temperature range: +6ºC / +10ºC Version with convection cooling including lighting Connection: Connected load: 230 V /0.29 kW 1 phase / 50 Hz / 16 A with plug in Schuko design ...

Cast Film CoEx System (ABA), PE / PP, Capacity: approx. 400 - 700 kg/h, Main extruder, 120 mm, co-extruder of 60 mm, screen changer, melt pump, Co-Ex block, nozzle 1,650 mm, 2-roll chill-roll smoothing unit, cooling section, extractor, double winder with cutting device and edge control, edge trim, film measuring device thickness NDC (without measuring head), incl. operating instructions and e-plans.

NEW! industrial shredder for pulled meat suitable for beef, pork, lamb, chicken,… content hopper : ± 35L electrical power : 1,47 kW capacity : ± 300-500 kg / h (depending on the degree of the cooking) possibility to place a 200 L eurobin at the bottom of the machine, so the product falls in it.

Qty. 1 Second-hand batch-type annealing furnace Mfc.: LOI SAAR Type: natural gas (Hu=3.6 MJ/Nm³) Charging material: square, round dia. 50 up to 200 mm Length: 6.2 m Max. heat treatment temperature: 950 °C Capacity: max. 60 T at normalising 35 T Application: Tempering, stress relieve, normalising Heat gradients: 60 °C/h average (adjustable) Heating zones: 4 Number of burners: 20 Control principle: on/off with digital programmer Temperature precision: 10°C tolerance at 550 °C

Smoke house BASTRA Dimensions: 175x120x220cm Power: 18 KW

Gross volume approx. 18 litres, net volume approx. 12 litres Mixer shaft heatable and coolable Double jacket heatable and coolable Product-contacted parts: stainless steel VA Drive is carried out by chain drive and gearmotor Subject to prior sale - Errors possible

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

Key data: 250 KW, 314 kVA, 400 V

MODEL: EQ-BG312250 ENGINE: WP13D317E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 312.5(kVA) / 250(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 2275kg DIMENSIONS L/W/HEIGHT (MM): 311011341450 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with yo ...

Mixing vessel Company: Bäuchle & Sohn N°: 2193/1/2 Built: 1987 Double jacket pressure: 3 bar (insulated) Indoor and outdoor temperature: 150°C Content: max. 400 l min. 50 l Wiper agitator, speed-controlled Jet-flow agitator with 2 stages Temp meter, switchgear Dimensions LWH: 1100 x 970 x 2220 mm Weight: approx. 600 kg

Key data: 500 KW, 625 kVA, 400 V

MODEL: EQ-BG625500 ENGINE: 12M26D605E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 625(kVA) / 500(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 5040kg DIMENSIONS L/W/HEIGHT (MM): 374714861909 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with you ...

infeed station, pressing station, jogging station, banding station for up to 2 up production, transport to paternoster delivery table format sizes 1 up production 720 x 235 mm, 2up production 335 x 235 mm Bundle Delivery with Pressing Station

Key data: 100 KW, 125 kVA, 400 V

MODEL: EQ-BG125100 ENGINE: WP6D132E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 125(kVA) / 100(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 1085kg DIMENSIONS L/W/HEIGHT (MM): 25329501365 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your d ...

M.Bäuerle CAS 52/4 Art; Online folding machine with H+H feeder; 4 folding pockets; 3x Ionosation; Investment table 150cm; Max inlet width 520mm; may also be operated with other investors or upstream systems; Meter reading 4.5 million Online folding system M.Bäuerle CAS 52/4 Art; with feeder H+H; 4 pockets; 3x ionization; feed table 150cm; max.width 520mm; ca be used with other feeders or systems; counter only 4.5 mio.

Key data: 350 , 34 , 22

Manufacturer: Battenfeld Type: Plus 350/75 Built: 2004 Control: Unilog B2 Closing force: 350 kN Closing type: Hydraulic Tie bar ratio: 270 mm Plate size: 470 mm x 285 mm Tool installation height: min. 150 mm max 250 mm Opening distance: 200 mm Plate spacing max.: 450 mm Screw: 22 mm Lifting volume: 38 cc Spray weight PS: 34.5 gram HP Spray pressure: 1627 bar General Engine: 7.5 kW Heating: 2.7 kW Dimensions: 2.3 m x 0.9 m x 1.3 m Weight: 1100 kg Screen text: German / English Additional equipment Robot interface

Key data: 500 , 130 , 35

Manufacturer: Battenfeld Type: BA 500/210 TM Built: 2000 Control: Unilog B2 Closing force: 500 kN Closing type: Knee lever Tie bar distance: 320 mm x 320 mm Plate size: 490 mm x 490 mm Tool installation height: min 150 mm max 350 mm Opening distance: 250 mm Plate spacing max.: 600 mm Screw: 35 mm Lifting volume: 144 cc Spray weight PS: 130 gram PS Spray pressure: 1500 bar General Engine: 11 kW Heating: 10.4 kW Dimensions: 3.3 m x 1.1 m x 1.7 m Weight: 2500 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Key data: 750 , 198 , 40

Manufacturer: Battenfeld Type: BA 750 - 350 TM Built: 2000 Control: Unilog B4 Closing force: 750 kN Closing type: Knee lever Tie bar distance: 370 mm x 370 mm Plate size: 590 mm x 590 mm Tool installation height: min 200 mm max 400 mm Opening distance: 330 mm Plate spacing max.: 730 mm Screw: 40 mm Lifting volume: 220 cc Spray weight PS: 198 gram PS Spray pressure: 1595 bar General Engine: 15 kW Heating: 12.1 kW Dimensions: 3.8 m x 1.3 m x 1.8 m Weight: 3300 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Key data: 1000 , 291 , 45

Manufacturer: Battenfeld Type: BA 1000/525 TM Built: 2002 Control: Unilog B4 Closing force: 1000 kN Closing type: Knee lever Tie bar ratio: 420 mm x 420 mm Plate size: 640 mm x 640 mm Tool installation height: min 200 mm max 450 mm Opening distance: 330 mm Plate spacing max.: 830 mm Screw: 45 mm Lifting volume: 318 cc Spray weight PS: 291 gram PS Spray pressure: 1659 bar General Engine: 18.5 kW Heating: 13.8 kW Dimensions: 4.1 m x 1.3 m x 1.8 m Weight: 3900 kg Screen text: German / English Additional equipment Robot interface Core train: x2

BAYKAL HNC 4110 hydraulic guillotine shears built in 2019 in Turkey are designed for precision cutting of workpieces with a maximum thickness of 10 mm. The machining process is performed by extremely precise cutting knives with adjustable gap between blades. The all-steel construction combined with a powerful hydraulic system additionally ensure the highest stability and machining performance. The BAYKAL HNC 4110 guillotine shears have been in use for a small amount of time – so far they have worked only 560 hours. The total weight of the machine is 15400 kg. Technical specifications of the BAYKAL HNC 4110 guillotine shears - HMI panel: SIEMENS SIMATIC HMI - maximum sheet metal length: 4060 mm - maximum sheet metal thickness (Rm

Key data: 150 mm

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

Head machine TTW Bavaria dough part and actuator -Head machine Bavaria -Model 512 -5 rows

Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.

Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.

Year: 1965 Make: SHELL / BADGER N.V. Crude Oil Atmospheric and Vacuum Distillation and Naphtha Stabilizer. Year of manufacture 1965 Process Design by Shell Process Engineering by BADGER N.V. Feed = Original design, paraffinic crude (21 d/month), naphthenic crude (7 d/month), after 2015 Revamp is 100% naphthenic crudes. Crude oil with Total Acid Number (TAN) up to 4,2 (TJP), 3,3 (Laguna), (range of Viscosity = 5,5 – 144 cst/100°C) Throughput max. 12.000 t/d – original design Current Process Parameters (after 2015 Revamp) Atmospheric Distillation: Throughput max. 6000 t/d Operational operating temperature = 355°C Operational operating pressure = 2,5 bar Vacuum Distillation: Throughput = max. 4500 t/d Operational operating temperature = 380°C Operational operating pressure = 0,2 bara Naphtha Stabilizer C-0807: Throughput = max. 2000 t/d Operational operating temp ...

Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.

SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...

Max. size= 42 x 42 cm, Availability= 082023, Plate punch Bacher 425 mm LOT Loaded in truck or container

Max. size= 80 x 60 cm, Availability= 042023, max. plate width 80 cm Punching distance 425 mm Machine No. 2349 LOT Loaded in truck or container

Big Bag filling station, filling and weighing system used The system consists of the following components: 1 filling hopper approx. 2300 height 2500 mm 2 stainless steel trough screws 1 tumbling/shaking sieve approx. 1200 height 1900 mm 1 BigBag filling station approx. 1950 x 2400 x 3700 mm 1 control cabinet The Big Pack filling is filled by wheel loader or forklift via a pouring funnel. The filling material is transported via a conveyor screw to a tumbling sieve. From there, transported with another screw to the actual weighing and filling station. The big bags lie on a vibrating floor when filling and are thus compacted.

M. No.: 121

Тypе: FESSMANN BK 2 522 1W Baking chamber with rotating trolley of 360° Heating: electrical Control: DP 11 Width of the basic area: 198 cm Depth of the basic area: 187 cm Corpus height: 251 cm Total height: 298 сm Min. room height: 340 сm Baking trolley dimensions (HxBxT), сm: 198х102х104 Installed power, electrical heating: 88,2 kW Baking temperature: about 230 ° C

Plate dimensions: 2500,1250 mm Daylight opening: 400 mm Number of daylights: 1 St. Specific pressure: 2,2 kg/cm² Motor output: 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer Adsorption dryer 2 Kaeser DC 75 E Bj. 2016 6-16 bar Bid 1-3 The system is part of a compressed air system in a production hall. It is used built in 2016, and fully functional, in very good condition and is offered - due to restructuring of the use of the hall at our customer. The display will continue to be updated specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption Dryer DC 75 with 2 desiccant containers Bj:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption center: Activated aluminum oxide Al2O2g - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1038 - Operating hours: 5700 estimated based on compressor hours - Max operating temperature air: 0° C - Ambient temperature 2-45°C - DL entry temperature min/max +2 / +50 °C - Volume flow at 20°C compressed air ...