126,721 used machines on RESALE, but how to find them? Machine Search
General SKU454W1505 MakeWab Bachofen LocationBarneveld TypeMulti Lab Main Features MaterialStainless steel/Teflon Volume1.5 Ltr. Motor4 KW Specified Features - Sand mill MaterialPTFE (Teflon) Horizontal sand millcheck Capacity±1,5l Housing dimensions Dia. 100x215 mm InletDN15 OutletDN15 With jacketcheck Motor4 kW, 400 volt, 50 Hz, 2875 rpm Without ballscheck Information No.070715 Year of construction2007 With switchgearcheck Floorspace0,68x0,74 m Total height0,58 m Weight97 kgSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU437W1415 LocationBarneveld Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity20 l. Vessel sizesDia. 550x600 mm Dished bottomcheck OutletPneumatic valve With jacketcheck With propellor stirrercheck Motor0,37 kW, 220/380 volt, 1410 rpm Information MakeMedimex TypeMED 265 Mounted on legscheck With switchcheck Floorspace1,10x1,0 m Total height2,20 m Weight850 kg Extra SpecificationsWith ToolTemp temperature controller, type TT400, stainless steel vertical pressure vessel, volume approx 30 l. Stainless Steel ReactorsMedimexReactors > Stainless Steel ReactorsBrand > Medimex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...
General SKU405W1265 MakeWAB Bachhofen TypeKD15 LocationBarneveld Main Features MaterialStainless steel Volume15 Ltr. Motor17.5 KW Specified Features - Sand mill MaterialStainless steel 1.4000 (410S) Sand mills Ball millcheck Capacity15 l., (12,5l.) Drum sizesdia. 200x410mm InletDia. 35mm Outletcheck Motor17,5 kW, 380 volt, 1450 rpm (EX) With variable speed drive1305 rpm Speed13 m/sek Information No.890289 Year of construction1989 With switchcheck Floorspace1,150x0,70 m Total height1,60 m Weight560 kg ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU404U1225 MakeBaumgartner & Co LocationBarneveld CEcheck Pressure Working pressure2.5 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume103 Ltr. Pressure2.5 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Capacity103 Ltr. Vessel sizesdia. 450x715 mm Dished bottomcheck Top connectionsDN50 (CIP), DN40 Outletdia. 33 mm Max. temperature-15/150 °C With propellor stirrercheck (magnetic) Motor0.25 kW, 230/400 volt, 2720 rpm Speed mixing shaft± 200 rpm Information No.566 Year of construction2004 Mounted on consolescheck Floorspace0,74x0,74 m Total height1,2 m Weight200 kgPressure vesselsBaumgartnerTanks > Pressure vesselsBrand > Baumgartner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipp ...
General SKU296U567 MakeDYNO-MILL WAB Bachofen LocationBarneveld TypeKD 60 Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor45 KW Specified Features - Sand mill MaterialMild steel, stainless steel 1.4000 (aisi 429) Horizontal sand millcheck Capacity60 Ltr. Housing dimensions Dia: 290x960mm InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor45 kW, 350/660Volt, 1475rpm Rotor speed900rpm Without ballscheck Capacitycap. range 200-1300 l/h With pumpcheck Motor0,37kW,230/400Volt, 1375rpm Information No.910820 Year of construction1991 Floorspace2,1x1,3 m Total height1,8 m Weight1500 kgSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...
WITH STAND Ser. No.: 97651504 Format (mm): max. 297 x 420 // min. 105 x 148 Pockets: 2 Folding arts : Letter fold, zigzag fold, double parallel, single fold
The machine is in good technical condition, testing is possible after prior agreement. Pressing force: 35 tons • Working length: 1250 mm • Control system: CNC (precise adjustment of angles and stops) • Condition: Fully functional, currently not connected. Main advantages: • High accuracy: Stable frame and precise positioning for high-quality bending. • Compact dimensions: Ideal solution even for smaller workshops and operations. • Accessories: The sale includes the equipment visible in the photos.
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
Offered is an abdominal opener for poultry processing. Manufacturer: LINCO Food Systems (formerly Lindholst & Co A/S, now BAADER) / Tielemann Food Equipment BV, type 12 CW / 8 inch. Compatible bird sizes (live weight): standard broilers: 1.5-2.5kg, large broilers: 2.5-4.0kg, laying hens: 1.0-4.5kg, throughput: 6300 birds per hour (BPH), noise emission: below 80dB(A) at the workplace, machine dimensions (W/D/SM): 1380mm/1350mm/776mm, machine weight: approx. 550kg. Suitable for integration into industrial poultry slaughter and evisceration lines. Inspection possible by arrangement.
This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information.
Robot Automation Manufacturer Guarantor Type Basic Plus Nachi M212 Year of construction 2022 1960 Hours Was operated on a Gildemeister CTX 410. It is in a used, very good, 100% functional condition
This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for sale.Contact us for more information.
Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ã16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details.
General SKUR0454 MakeAZO GmbH & Co KG LocationBarneveld TypeAZO Emptying system AZO Batchtainer 700x1005 Main Features MaterialMild steel Number of1 heads Specified Features - Powder filler MaterialMild steel Powder fillerEmptying system Information No.1269665 Year of construction2015 Floorspace1,3x0,9 M Total height0,7 M Extra SpecificationsThis pick-up station is used for discharging product from a container of type AZO Batchtainer This machine is equipped with 2 JVM vibration motors 0.4 kW 380/420 Volt For opening the Batchtainer, a pneumatically driven rotary mechanism is mounted Powder fillersAZOPackaging machines > Powder fillersBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...
General SKUR1059 MakeBausch & Ströbel Maschinenfabrik (D) LocationBarneveld TypeKSF-1020 Main Features MaterialStainless steel Motor0.25 KW Number of1 heads Specified Features - Capper MaterialStainless steel Cappers Electric capacity2 kW Motor0.25 kW 380 Volt With conveyor beltcheck With cappercheck Number of closing heads:1 Single headcheck Rotating cappercheck For pilverproof capscheck For plastic capscheck Number of closing heads:1 With motor0.25 kW 380 Volt With vibratory feed bowl(2x) With conveyor beltcheck Belt width80mm Information No.4755 Year of construction1979 With switchgearcheck Floorspace4,0x1,2 M Total height2,0 M Weight1500 Kg Extra Specificationswith additional format parts: Round 31.5mm, Round 50mm, Round 51.5mm, Round 67mm, Round79mm, Square 53mm, Square 53mm Bottle feeding and sealing machine, without filling installation CappersBa ...
General SKU410S990 MakeBauermeister Verfahrenstechnik GmbH (D) LocationBarneveld TypeWSV 1300 Specified Features - Roll breaker MaterialStainless steel Roll breakercheck Double shaftcheck Roll sizesdia. 240x1300mm Fluted rollscheck Inlet1260x210mm Outlet1300x550mm Motor15 kW 500 Volt Feeding by metering rollcheck With roll feedingcheck Motor2,2 kW 500 Volt Information No.8.42204 Year of construction1998 Floorspace2,2x1,4 M Total height1,3 M Weight2200 KgRoll breakersBauermeisterBreakers > Roll breakersBrand > Bauermeister What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU223N083 LocationBarneveld MakeNewmix TypeSystem 1000 Premium EU No.701024 Main Features MaterialStainless steel Motor0.55 KW Length950 mm Specified Features - Stirrer Stirrercheck Shaft length1x 950mm (1000l), 1x 670mm (500l), 1x 570mm (200l), 1x 470mm (50l), 1x 400mm (25l) Motor0,55 KW, 230 Volt With frequency controllercheck MaterialStainless steel 1.4301 (304) Information Year of construction2008 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,1 x 1,6 m Total height2,0 m Weight400 KG Extra Specifications- Mixer for contents of bags with liquid - 2x kettle 500 liters: double-walled, mobile - Tempering unit Single STL 1-9-B5/10-TKG StirrersNewmixMixers > StirrersBrand > Newmix What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to ...
General SKU268N294 MakeParker Baston TypeNitrogen generator N2-22 Year of construction1994 LocationBarneveld Main Features MaterialMild steel Volume50 Ltr. Specified Features - Miscellaneous MaterialMild steel Capacity50 Ltr (at 7 bar and 95% pureness) Information Floor space2,0x1,5 M Total height2,7 M Weight900 KG Extra Specifications (1x) Nitrogen generator, manufacturer Parker, Typ N2-22 : (1x) Vessel, manufacturer Gianesi Edilio, Type No.9767, Content 250 Ltr, Build 1994, Pressure 12 bar MiscellaneousParkerMiscellaneous > MiscellaneousBrand > Parker What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU294N388 LocationBarneveld MakeBHS Werk Sonthofen Dimensions Filter width80 cm Material Product contact materialStainless steel 1.4529 (926) Main Features MaterialStainless steel Motor15 KW Surface2.25 m2 Specified Features - Vacuum belt filter Vacuum belt filterEnclosed indexing vacuum belt fliter Filter surface2,25 m² Filter width800mm Number of sections:6 Without motor(pneumatic) Knife dischargecheck (knife blade not included) With vacuum pumptype PMMZF 3813 D3 Motor15 KW, 500 Volt With vacuum tankcheck MaterialStainless steel Information TypeBF 5 /4.5-KD Year of construction1997 Floorspace7,0 x 2,0 m Total height2,5 m Weight5000 kgVacuum belt filtersBHS SonthofenFilters > Vacuum belt filtersBrand > BHS Sonthofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...
General SKUR0316 LocationBarneveld MakeAZO GmbH & Co. KG TypeD800XD400X1300H Main Features MaterialStainless steel Volume300 Ltr. Specified Features - Silo MaterialStainless steel 1.4301 (304) Silocheck Closedcheck Capacity300 Ltr. Sizesdia. 800x1000mm Diameter800mm Cylindrical height390mm Conical height600mm Conical bottomcheck Flat topcheck Inletdia. 50mm Top connectionsdia. 50mm Outlet with valvecheck Outletdia. 400mm Information No.1100959 Year of construction2012 Mounted on framecheck Floorspace1,0x1,0 M Total height1,3 M Weight240 Kg Extra Specificationsoutlet is equipped with a manually operated butterfly valve DN400 SilosAZOTanks > SilosBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...
General SKU032U185 MakeHoefnagel & Meijn No.91410-01, Design pressure 0,3 bar Year of construction1991, Strainer perforation dia. 5mm LocationBarneveld Main Features MaterialStainless steel Specified Features - Screen filter MaterialStainless steel Screen filters FilterStrainer/Basket filter (1x) Information Extra SpecificationsMounted on legsScreen filtersHoefnagel&meijnFilters > Screen filtersBrand > Hoefnagel&meijn What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Key data: 62 kN
Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of Make: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touch Screen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor controlled by an inverter – very precise Automatic part feeding with quality control system Machine workplace protection with safety package Dimensions: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to part ...
Key data: 3000 kN
Battenfeld EcoPower SE 300/1330 / Electric Machine Year of Make: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Spray pressure: 2470 bar Dosing volume: 540 cc Clamping unit: Clamping force: 300 t Tiebar spacing: 770x720 mm Size of the clamping plates: 1090x1170 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air Valve x 8 Control with hot runners x6 Hardened injection unit - Bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/Width/Height: 7.20x2.04x2.20m Drive: Pumps/motor: 0 kW Heating capacity: 22 kW Total power: 0 kW All offered machines are started by our servic ...
Key data: 2700 kN
Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Spray pressure: 2041 bar Dosing volume: 653 ccm Clamping unit: Clamping force: 270 t Handlebar spacing: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with parallel horizontal injection units Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control with air valve Hydraulic core pull x 3 Reinforced Injection Units – Bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm I ...
Key data: 3000 kN
Battenfeld HM 300/2250S with the Wittmann W818 robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of Make: 2007 Injection unit: Screw diameter: 55 mm Injection weight: 702.5 g Spray pressure: 2500 bar Dosing volume: 772 ccm Clamping unit : Clamping force: 300 t Spar spacing: 710x630 mm Size of the clamping plates: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection New original screw and barrel are installed in the machine Robot Wittmann W818 4-axis, high-speed robot: ...
Key data: 1500 kN
Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with the Rotary Molding Machine Year of Make: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Spray pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Spar spacing: 0x0 mm Size of the clamping plates: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Vertical Injection Molding Machine with the Rotary Molding Machine Hybrid machine: high-speed, energy-saving and very quiet Air Valve x 5 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Rotary table diameter: 1500 mm Rotary table driven by a servo motor, controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83x1.50x4.07 m All offered machines ...
Key data: 1300 kN
Battenfeld BA 1300V/315 V-R / Vertical Injection Molding Machine with the Rotary Table Year of Make: 1997 Injection unit: Screw diameter: 40 mm Injection weight: 182.9 g Spray pressure: 1575 bar Dosing volume: 201 cc Clamping unit: Clamping force: 130 t Handlebar spacing: 454x740 mm Size of the clamping plates: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 4000 Additional equipment: Air Valve x 5 Hydraulic core pull x 1 Rotary table: 1250 mm The vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7500 kg Length/Width/Height: 3.83x2.33x4.16 m Drive: Pumps/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live te ...
Key data: 1500 kN
Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating Hours: approx. 29,000 in automatic mode Year of Make: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Spray pressure: 1714 bar Dosing volume: 442 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x470 mm Size of the clamping plates: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total number of operating hours: 36,714 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 6600 kg Length/Wid ...
Key data: 1100 kN
Wittmann Battenfeld EcoPower 110/350 / Electric motor / Operating hours: approx. 15,000 in automatic mode Year of Make: 2019 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 682x682 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 21,800 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Dimensions: Weight: 4800 kg Length/Width/Height: 4.91x1.42x2.10 m ...
Key data: 1100 kN
Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Clamping unit: toggle lever Control:UNILOG B8 - Touch Screen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements The machine was servi ...
Key data: 1000 kN
Battenfeld TM 100/525 Year of Make: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Dimensions: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...
Key data: 1000 kN
Battenfeld HM 100/525 with the Battenfeld R10S robot / Operating hours: approx. 19,000 in automatic mode Year of Make: 2008 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total number of operating hours: 26,580 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Battenfeld R10S robot Year of Make: 2015 5-axis robot: 3 axes are driven by servo motors (electric); Axis B - pneumatic, Axis C Robot with adapter Purchase of the r ...
filling amount: 250 l basket dimensions: 550 x 270 x 75 mm dimensions of the machine ca.: 1,25 x 0,85 x 1,24 m BALTIC METALL - 6957 Dive Wash Unit - Immersion Tank Dimensions: 595 x 395 x 500 mm - Draining Area Dimensions: 470 x 350 mm - 2x Storage Rack Dimensions: 480 x 360 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Width 45 cm Year of manufacture 1997 flexible sword folding unit MS 45 Self-control Delivery date: immediately Price on request. Worldwide Delivery & Installation
Geared motor FARMER Type BF50-04/DHE11LA4 Volt 3 chamfer 400 volt 4 KW 56 RPM Hole 50 mm IE2 L 60.00cm W 30.00cm H 50.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Farmer Type BG60-11/D11LA4 3 chamfer 400 volts 5.5 KW 58 RPM Shaft 50 mm L 75cm W 35cm H 35cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
General SKUR0456 MakeAZO GmbH & Co KG (D) LocationBarneveld TypeAZO Emptying system AZO Batchtainer 700x1005 Main Features MaterialMild steel Number of1 heads Specified Features - Powder filler MaterialMild steel Powder fillerEmptying system Information No.1269665 Year of construction2015 Floorspace1,3x0,9 M Total height0,7 M Extra SpecificationsThis pick-up station is used for discharging product from a container of type AZO Batchtainer This machine is equipped with 2 JVM vibration motors 0.4 kW 380/420 Volt For opening the Batchtainer, a pneumatically driven rotary mechanism is mounted Powder fillersAZOPackaging machines > Powder fillersBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...
General SKUR0455 MakeAZO gmbH & Co KG LocationBarneveld TypeAZO Emptying system AZO Batchtainer 700x1005 Main Features MaterialMild steel Number of1 heads Specified Features - Powder filler MaterialMild steel Information No.1269665 Year of construction2015 Floorspace1,3x0,9 M Total height0,7 M Extra SpecificationsThis pick-up station is used for discharging product from a container of type AZO Batchtainer This machine is equipped with 2 JVM vibration motors 0.4 kW 380/420 Volt For opening the Batchtainer, a pneumatically driven rotary mechanism is mounted Powder fillersAZOPackaging machines > Powder fillersBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld ...
General SKUR0453 MakeAZO gmbH & Co KG LocationBarneveld TypeAZO Emptying system AZO Batchtainer 700x1005 Main Features MaterialMild steel Number of1 heads Specified Features - Powder filler Powder fillerEmptying system MaterialMild steel Information No.1269665 Year of construction2015 Floorspace1,3x0,9 M Total height0,7 M Extra SpecificationsThis pick-up station is used for discharging product from a container of type AZO Batchtainer This machine is equipped with 2 JVM vibration motors 0.4 kW 380/420 Volt For opening the Batchtainer, a pneumatically driven rotary mechanism is mounted Powder fillersAZOPackaging machines > Powder fillersBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...
pressure: 035 t chamfer lenght: 1250 mm distance between columns: 1070 mm piston stroke: 150 + 60 mm column arm: 410 mm table height: 800 mm dayligth: 470 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec table width: 140 mm Control: ELGO NC Number of working hours: ~ 9.600 h oil volume: 80.0 l operating pressure: max. 240 bar voltage: 380 V total power requirement: 4.0 kW weight: 2200 kg range L-W-H: 1800 x 1450 x 2150 mm Well maintained condition With only approx. 9.600 operating hours () Features: - Robust NC-controlled hydraulic press brake - With ELGO NC control unit P8822” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swiveling control panel, front left - NC electric motorized backgauge (X axis) With 2x stop fingers, manually adjustable (R+Z axis) - 1x split set of pointed tools - top - 1x rotatable Multi-V die block - Side saf ...
cutting diameter: 320 mm saw band length: 3400 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 400 mm capacity 45 degrees: flat: LI 320 x 280 mm capacity 45 degrees: flat: RE 320 x 260 mm capacity 60 degrees: flat: RE 320 x 140 mm band speed: 35 + 70 m/min work height max.: 930 mm voltage: 400 V total power requirement: 2.67 kW weight: 950 + 250 kg range L-W-H: - mm well-maintained condition () current new price incl. accessories ~ 40.000 Euro special price on request Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - miter cuts are carried out fully automatically electro-hydraulic miter adjustment left right - Up to 99 cutting programs - Central operation of all machine functions from the front - Loading also possible from above - Precise positioning thanks to accurate measuring system - electro-hydra ...
Key data: 1600 mm, 2000 mm, 1500 mm
Inv. Num. : 8971 Type: BT 1600 S2 Producer: TOS HULIN Created: 2018 Parameters: Switch-on hours: 11910 h Max. turning diameter: 2,000 mm Face plate diameter: 1,600 mm Max. workpiece height: 1,500 mm Max. workpiece weight: 12,000 kg Speed range faceplate: 2–315 rpm (2-stage infinitely variable control) Main drive SIEMENS: 58 kW Max. cutting force: 45,000 N Working stroke ram: 1,060 mm Feeds: Working feed: 1–4,000 mm/min Rapid traverse: 12,000 mm/min Feed per revolution: 0.001–50 mm/rev Threading: 0.01–400 mm/rev Dimensions and weight: Machine height: 5,655 mm Space requirement incl. protective cover: 8,685 x 5,325 mm Total weight: approx. 46,000 kg
Used Used Wraparound Baumer 35 ppm: Year: 1997 Condition: Good Used Wraparound Baumer 35 ppm Year: 1997 Speed: 35 ppm Formats: From 24 (6?4) 33cl and 50cl Inlet transport and bottle divider missing Only for cans Safety protections Code: JL 225 More details: https://bottlingscout.com
Used Used Shrink Wrapper Baumer: Year: 2002 Condition: Good Used Shrink Wrapper Baumer Year: 2002. Speed: 20 bundle per minute. Model: avvolgitrice flex Film launch system (film only). Safety protections. Code: F 35 More details: https://bottlingscout.com
Used Used Case Packer Wrap-Around Baumer Flex 512/3: Year: 2013 Condition: Good Used Case Packer Wrap-Around Baumer Flex 512/3 Year: 2013 Speed: 25 box per minute (8/9.000 bph) Model: flex 512/3 Type of closure: glue Type: with hives inserter Motorization of the independent suction cup arm Type of hives insertion: from below Possibility of use with or without hive inserter: yes Alimentation: voltage: 380v. / 50hz. 3 phases | neutral | earth Air pressure: 6 bar Consumption 40 nl/minute Gluer: preo Storage: capacity 300 boxes Safety protections: yes Code: JL 232 More details: https://bottlingscout.com
Used Used Bag In Box Line 3 LT 2012: Year: 2012 Condition: Good Used Bag In Box Line: Case erector: Sacmi Packaging EC 25 ? 2012 Ultra Clean filling: Sacmi Pakim FB-2 ? 2007 Closing: Sacmi Pakim C.R.C.E. bib ? 2007 Handler: Sacmi Pakim ? 2007 Speed on the format 3 LT: 1.200 pz/hour Equipped for 3 liters Safety Protections Gluer Case Erector MELER Micron 4/2 120P ? 2012 Gluer Closing machine MELER Micron 4/2 100P ? 2007 Conveyors boxes included Codice: OP 10 Code: OP 10 More details: https://bottlingscout.com
Used Used Wrap Around Baumer 2010: Year: 2010 Condition: Good Year: 2010 Speed: 20 BPM Model: WA FLEX 534/90? Infeed: 90? Gluer: PREO EASI 5 Suitable for round and shaped bottles Current formats: 4?3 round bottle of 0.75 lt 3?4 rectangular bottle of 0.35 lt Workable case formats: min mm240x150 H 115 max mm 420?300 H 350 Safety protections: yes Code: JM 102 More details: https://bottlingscout.com
GT-5315 1-Spindle Extruder - Brand: FLAG - Ø 120 mm - 2.2 meters long spindle - With 75 hp (55 KW) engine - No electrical panel
GT-5350 Single Spindle Extruder - Brand: FLAG - Diameter: 120 mm 25 L/D - Spindle length: 3 meters - Extruder electrical panel
maximum number of results exceeded
please refine your search
