b tec used for sale

TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

Qty. 1 Second-hand 8” logs furnace Mfc.: Tecalex Aluminium Technology Built: 2014 Capacity: 4000 kg/h Consist of: Furnace frame Refractory insulation Burner areas Log guiding system Air-gas piping Air supplying fan Thermocouples Fumes exhaust and recirculation fan Furnace exit door Pneumatic system (for the thermocouples and the door cylinders) Nominal production capacity: 4000 kg/h Log diameter: 8” – 203 mm Zones of burners (nº of thermocouples) Nº 4+2 Thermal nominal power installed: 1440 kW Electric nominal power installed: 35.5 kW Max. temperature: 510 °C Dimensions: 16250 x 2400 x 3200 mm – L x W x H UNITS VALUES N° of burners 187 N° of pilot flames 12 Maximum consumption of natural gas ( 36MJ/Nm3 ) Nm³/h 147 Maximum consumption of propane ( 97MJ/Nm3 ) Nm³/h 61

Horn pump Cabinet consisting of: -2 x Horn pump MP 5 (700 l / min) -> For heating oil, diesel and bio-diesel Technical data: Max capacity: 700 l / min Supply voltage: 400 / 50 V / Hz Capacity: 2, 5kW Inlet: DN 80 Pressure connection: DN 80 Maximum suction height: 4, 5 m Protection class: IP 44 Pump Cabinet is painted and fully functional! The pumps can be expanded like at extra charge out of the closet, but we would prefer a sale as a complete package!

Complete HPLC-MS system Agilent 1200 with single Quad ESI mass-spectrometer 6110 E1M18 foreline pump Edwards G1311A quaternary pump G1329A autosampler G1379B micro vacuum degasser G1316A column oven G1314A variable wavelength UV detector Incl. measuring computer / software Tel: 06721-9886710

0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Lieder (ROBOT FOOD TECHNOLOGIES) Type: TA54V-2 4 Lines Size of tubes: Ø 75 mm Filling volume: Filler 1: 25 - 50 ml Filler 2: 100 - 250 ml (you can make two different products into one cup) Capacity: up to 10.000 cups/h Cup disinfection: by H2O2 Including: - carton erector and packer 4x5 - Clean air filter (Laminar flow) - CIP installation - SIEMENS S5 control

Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE

This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. The processing of the cable is carried out in the two-blade system both knives from both sides at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are independently adjustable continuous operation or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical

Pharma Technology DV1300 +VC vertical tablet/capsule deduster, output 50,000 to 2,000,000 pieces/hour.

Good day have with this machine a top TECA print up to 4 colours! Carrée and pad cleaning! Absolute Professional machine. If you have questions just email!

Unwinding, cutting, stacking and depositing on a conveyor belt consisting of: 1x u550 divertler, slicer/stack system c23s25 (middle cut-out) and 1 x conveyor belt tray 2m and an extraction system GR 140.2 x trolley for paper rolls. Specifications: Dispenser u550: Umwinder u550 Outfeedplate Airshaft 70mm/520 Lifting KIT Offline KIT 2 trolleys for the paper rolls Cutting line C23S25: Cutter c23 Middle knife Gutter cut 6mm c20/23 Extraction side trim-c23 v2 Conn.parts Gutter cut c23 v2 Stacker s25: Aassy Automatic stop plate Conveyer/conveyor belt 2000/634 v-speed Extraction system GR 140 Appointment You have the opportunity to inspect the objects before buying. Location Location: Im Schorrenfeld 8 in 76661 Philippsburg-Hüttenheim Disclaimer The sale of used items takes place as the item stands and lies, to the exclusion of any warranty for material defec ...

Qty. 1 Second-hand pulp moulding plant Maker: DongJin MP Tech Model no.: DPF 70-85 S2 Built: 2007 Dry type pulp moulding machine Quantity: 4 units Condition: can be inspected in dry running Three step way: heating /pressing/vacuum dry -Platen size: 700 x 850 mm -Dimensions: 1300(W) x 3200 (L) x 4000(H) mm

Used weighing and packaging machine used for packing granules by TÉCNICAS MECÁNICAS ILERDENSES SL. model ILERSAC LBSD. New 2013. TECHNICAL DATA: PRODUCT CHARACTERISTICS: - Product BLACK COAL IN PROSPECT. - Density 340 / 645.16 kg/m3 - Fluidised Yes - Granulometry 30 µm - Sack type PAPER - OPEN BAGS - Bag weight 12 kg - Dimensions of bag 740x500x160mm - Dimensions of CP1 pallet 1200x1000x150 - Maximum pallet height 1800 mm Maximum production of 90 bags/hour CONNECTIONS: - Electrical connection 380V III+N+T 50 Hz - Installed power 12 kW - Control voltage 24 V - Air pressure 6 bar - Air consumption 150 NL/min. - Aspiration 1900 m3/h - 21 m/s Main features: - Programming of reading stability conditions. - Programming of weighing cycle and autocorrection parameters. - Zero variation detection range. - Precision: 5000 homologated divisions. - 50 operating reci ...

TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!

CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

Manufacturer: Tecnimetal Internationale Type: P&S Built: 2004 Total length: approx. 240 cm Total width: approx. 65 cm Total height: approx. 145 cm Basket height: approx. 60 cm Opening for chain: approx. 145 cm All information without guarantee

Used three extruders with die - head/three layer extruder from POLY TECH model HP 1800/3/100/55/55. New: 2000. 1) Head/Matrix - Slot of the die - 2,26 - Die diameter - 220 mm - Thickness 25-130 microns - Capacity 250-300 kg / hour 2) Matrix/Head - With efficient heating system (set of heaters with sensors PT/100 temperature sensors) - Three described Poly Tech extruders A) Extruder fi 100 mm L/D 30 with 150 kW motor drive . ZAMBELLO/ITALY drive gearbox TYPE RPU 280 E RPM 1400 B) Extruders fi 55 mm L/D 30 with 60 kW motor drive pcs. 2 ZAMBELLO/ITALY gearboxes TYPE RPU 180 E RPM 1400 The described extruders have a gravimetric system from DOTECO/ITALY Model GRADO IIS/GO 4100940 equipped with a metering system with computer readout on the measuring cabinet. Complete plasticizing systems including drive gears and main driv ...

Techne HB-1D Hybridiser Hybridization Oven/Incubator This economical high-performance hybridization furnace is compact and easy to use. It's for the immobilization of DNA, RNA and proteins on Nylon or nitrocellulose membranes. The incubator holds up to six hybridization tubes with at least five 20x20 cm membranes/tubes. A clear liquid crystal temperature display and glass door allow for accurate data observation. The warm-up time is 50 minutes (from 16 to 65 °C) with over-temperature shutdown. The device has a digital temperature control and a PRT temperature sensor. • Compact, easy to use and offers complete protection against hybridization hazards • A temperature range of 10 °C above ambient to 100 °C • High capacity that can hold up to 24 mini tubes or 6 unique large tubes • Hybridizations can be performed with a minimum volume of 5 ml probe • Adjust ...

Manufacturer: Technigraf , Type: Aktiprint S, Year: 2002, Work piece width min-max mm: 1300, Number of lamps: 2, Lampen gerade eingebaut: 2, Power per lamp watt UV: 2 x 120, Working hight approx mm: 5 - 35, Conveyor: PTFE Band, Through running hight mm: 20, Year :2002

Mobile marking station Marking of metal parts - was used in Faurecia Machine checked - fine, ready for use

Manufacturer: GWK Walzenheizgerät, Type: Teco 800, FREETEXT1: Kw Leistung 6, FREETEXT2: Warmwasserbetrieb, FREETEXT3: Max. 140 Grad , FREETEXT4: Regelbar,

Manufacturer: Teco Umrichter, Modell: N2-402-H3,

Machine type point welding pliers Make TECNA Type Power Pointer 7900 Connection voltage 1 x 400 V switch-on time 50% ED at 2.0 kVA current setting infinitely variable max. pointable material thickness 2.0 + 2.0 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 7.2 kA discharge min. 125 mm max. 500 mm Weight 12 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,210.00 + VAT Price €720.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € Item No. n353.5.3910 Electrode sharpener for hand cutting 129.00 € Item N ...

Machine type point welding pliers Make TECNA Type Power Pointer 7902P - Pulse Connection voltage 1 x 400 V switch-on time 50% ED at 2.5 kVA current setting infinitely variable max. pointable material thickness 2.5 + 2.5 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 8.2 kVA discharge min. 125 mm max. 500 mm Special accessories incl. pulse current, especially for galvanized sheets Weight 13 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,490.00 + VAT Price €890.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 €  ...

Temperature control device Manufacturer: gwk Type: teco cs 90 N°: 11936 Y.O.M.: 2002 Heating capacity: 9 kW Rated cooling capacity: 23 kW Maximum temperature circulating medium: 95° C LWH: 900 x 260 x 600 mm

Temperature control units Manufacturer: gwk Model: teco wv Machine no: 1) S001 2) S010 3) S030 4) 567 good condition with operating instructions Control via touchpad LWH: 1300 x 320 x 950 mm 4 pieces available

Temperature control unit Manufacturer: gwk Model: teco wv good condition with operating instructions Touch panel LWH: 1100 x 330 x 750 mm

Temperature control units GWK central cooling system, project number 21 8729 Designed for: Cooling capacity 300 kW; at max. ambient temperature 32°C and cooling water flow temperature 20°C Composed of: Temperature control unit burner cooling Teco WCC100 / power 13.3 kW, nominal voltage 20.5A Temperature control unit heating roller 1 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 2 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 3 Tecma Wi 7.700.150D.150.D25, power 7.5 kW, nominal voltage 15A Temperature control unit cooling roller 4 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A Temperature control unit cooling roller 5 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A

Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes

HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module,  ...

Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes

Mint only 300 operating hours. Can be viewed on site. Dip-Tech GP Series – Industrial Digital Printing Machine for Glass (Ceramic Printing) Bjbsypllcjn Efavpscw High-end digital printing system for architectural, automotive and specialty glass The Dip-Tech GP Series is an industrial digital printing press for ceramic direct printing on glass. Developed for heavy-duty production, it combines the highest print quality (720 DPI), high speed (up to 33 m²/h) and maximum flexibility for glass formats up to 2400 x 6000 mm (depending on model). Thanks to the patented Drop-Fix system (air convection technology), the ink is optimally fixed – for finer details, sharper lines, reduced colour gradients and excellent colour brilliance. Technical highlights: ✔ 12 printheads / 720 DPI ✔ Up to 33 m²/h production capacity ✔ Glass thicknesses: 2–19 mm ✔ Glass sizes: 80 ...

Type: Clipper Tipper Tie Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Inclined surfaces to improve drainage of water S-clip on reels S-Clip: S 625, S 628, S 632, S 638 Dimension of the machine: Width: 100 cm Depth: 78 cm Height: 180 cm Power input: 0.1kW Fuse Connection: 2.5A Compressed air: 4-6 / 0,4-0,6 MPa Delivery time: 1 working day after payment

The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg

Key data: 199 , 6 , 40

FS Elliot Centrifugal Compressor with inverter starter = 1 unit Model : P300-300 Brand/ Manufacturer : FS Elliot (FSE) Air Quality : Oil-Free (ISO 8573-1 Class Zero) Compression : Three Stages Compression Cooling Method : Water Cooled Motor Power : 415V, 50Hz, 3 Phase Main Motor : TEFC, 415V, 3PH, 50 Hz Motor Type : Inverter type; brand WEG; IE3 Motor Starter : Inverter type, Free Standing Inverter Drive Starter without a line synchronous bypass system. designed and supplied by manufacturer, cable connection from starter to motor shall be supplied by customer or can be quoted separately. Shaft Power : 264.93 hp or 198.7 kW (} 4%) Delivery Air Flow Rate : 40 m3/min (} 4%), based on cooling water inlet temperature 32°C, inlet air temperature 35°C, Relative Humidity 80%. Discharge Pressure : 6.0 barg. Discharge Temperature : 37.3°C Vibration Sensors : 2 sets, Low and H ...

Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment