b 80 used for sale

A complete bread production line with proofing equipment is offered. The production line consists of a total of nine documented components: WP Kemper lifting and tipping device HK200L, WP Haton conical rounder CR59-AT, WP Haton dough divider V300, WP Haton conveyor 500mm, WP Haton conveyor 1000mm, WP Haton intermediate proofer AF2002, WP Haton discharge conveyor with retracting belt, WP Haton long moulder Combi UL and WP Haton delay conveyor. Inspection possible by appointment.

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system with centered glass scales and temperature compensation ⦁ Control panel with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool clamping Crowning ⦁ Manual crowning Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Sta ...

Standard configuration Machine ⦁ Stable machine frame for standing and sitting operation ⦁ Ram: stress relief annealed, optimized for few deformation ⦁ Electro-mechanic direct drive (Torque drive) ⦁ Inductive linear measurement system with temperature compensation ⦁ Switch cabinet air-condition ⦁ Ergonomic machine design Backgauge system ⦁ Highly dynamic backgauge system 3-axes X1, R1, Z1 Tool clamping ⦁ Upper tool system manual, non-hardened and self-centering for vertical tool change ⦁ Manual hardened lower tool clamping Control ⦁ Integrated machine control: TRUMPF TASC 6000, numerical shop floor programming ⦁ Windows XPe, Pentium M operating system, 1,1 GHz ⦁ 1 GB RAM memory ⦁ 15 touch screen ⦁ Network compatible Safety ⦁ Pivotable safety side-doors ⦁ Rear and side protective guard ⦁ 2-button foot switch for standing and sitting operation Addit ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic upper drive with 4-cylinder technology (IE3 drive motor) ⦁ Electronic pressure balance ⦁ Measuring system: With centered glass scales and temperature compensation. ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool Crowning ⦁ Manual crowning: Integrated in the table, manual adjustable crowning via wedges. Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Standard Safety equipment Control options ⦁ TRUMPF TASC 6000 ⦁ Network connection mach ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system with centered glass scales and temperature compensation ⦁ Control panel with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool clamping Crowning ⦁ Manual crowning Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Sta ...

Standard configuration ⦁ Stable all-steel welded machine frame ⦁ Press beam with high bending stiffness ⦁ Electro-hydraulic upper beam drive via proportional valves ⦁ Modern hydraulic block system ⦁ CNC backgauge with rack-and-pinion drive for X and R axes; safe front-side positioning of backgauge fingers ⦁ New Standard Clamping II manual upper tool clamping system ⦁ Lower tool holder for EV dies with hydraulic clamping and programmable positioning ⦁ Pneumatic lower tool shift with two positions ⦁ Electrical cabinet air conditioning ⦁ Network connectivity ⦁ Manually adjustable central crowning system ⦁ TASC 6000 CNC control Additional equipment ⦁ 6-axis backgauge system ⦁ Hydraulic upper tool clamping ⦁ CNC crowning ⦁ Safety device BendGuard for 220 mm/s ⦁ Preparation ACB ⦁ Working area lighting ⦁ 2 banding aids ⦁ Parking position 900 mm

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design Backgauge system ⦁ Backgauge system 2-axes Tool holder ⦁ Manual upper tool clamping ⦁ Shifting: programmable Crowning ⦁ Manual crowning: Integrated in the table, manual adjustable crowning via wedges Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Standard Safety equipment Control ⦁ TRUMPF TASC 6000 Operation ⦁ Communication Track  ...

Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Cattinair, radial fan, extraction blower -Type: XR CM B11R-4-7 -Motor: ABB 9.20 kW 2825 rpm -Inlet connection: Ø 240 mm -Outlet connection: Ø 240 mm -Fan wheel: Ø 460 x 80 mm -Protection class: IP 55 -Dimensions: 1030/890/H1040 mm -Weight: 194 kg

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed: Highly resistant to torsional forces, of ample size ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system: with centered glass scales and temperature compensation ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Control panel: with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ Hydraulic oil filled in the machine (lifetime lubrication) Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydrauli ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic upper drive with 4-cylinder technology ⦁ Optical set-up and positioning assistant ⦁ Generous edge clearance ⦁ Flat front covers ⦁ Block hydraulics ⦁ Electronic pressure balance ⦁ Measuring system with centered glass scales and deflection compensation ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ TCB - Thickness Controlled Bending Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Hydraulic upper tool clamping ⦁ Hydraulic lower tool clamping, hardened ⦁ Lower tool shifting 2 positions, pneumatic Crowning ⦁ CNC crowning Control ⦁  ...

Standard configuration Machine ⦁ C frame ⦁ Press beam ⦁ Highly dynamic electromechanical direct drive ⦁ Distance measurement system (Y-axis) with dynamic deflection compensation ⦁ Electrical cabinet air conditioning up to an ambient temperature of 40 °C Backgauge system ⦁ 3-axis backgauge with carbon fiber gauge finger (X, R and Z axis) Clamping system ⦁ Manual TRUMPF upper tool clamp ⦁ Manual TRUMPF lower tool clamp Control ⦁ TASC6000 machine controller ⦁ Integrated TRUMPF technology data ⦁ Data transfer ⦁ Network capability ⦁ USB interface Operation ⦁ Foot switch Safety ⦁ CE marking ⦁ Standard safety device Additional equipment Backgauge system ⦁ 6-axis backgauge system Ergonomic package ⦁ Comfort support table (front) ⦁ Comfort foot rest ⦁ Front work area illumination (LED) ⦁ Swiveling control panel ⦁ Sitting and standing aid ⦁  ...

Majer BSZ I – Cheese-box making machine Year: 1972 Machine for the production of cheese boxes. Format range, output and scope of supply on request. Reference: PP-57899 Further information on request.

Machine shreds steel packaging tapes 9-32 mm or plastic into approx. 8 cm long pieces and thus serves as a volume reduction. Packaging tapes without metal closures. E-connection 400 V, 50-60 Hz, 0.55 kW

Second-hand Bäuerle PKS pendulum saw for professional use in woodworking. The saw features dual swivel action and the rip fence has a pneumatic clamping mechanism. Technical data: Cutting width: ~ 600 mm Cutting height: ~ 120 mm Saw blade diameter: 450 mm Motor: 3 kW Swivelling range: 45° Roller conveyor length: ~ 6,500 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Used BORELLI T12 TECNA line - Year 2023Technical Specifications & Performance DataThe Borelli TECNA Line T12 is a glass bottle rinsing monoblock designed for sterile-water rinsing before filling in an automatic bottling process. This used bottling line component is fitted with a 12-pincer and 12-nozzle rinsing turret, providing a simple rinse treatment with discharged rinse water.Manufacturer: BorelliModel: TECNA Line T12Year of production: 2023Maximum speed: 3000 bph Rinsing system: 12 pincers/nozzlesCompatible containers: Glass bottlesCompatible formats: 0.5L, 0.75L (2.000 bph) and 1.5L (1.500 bph) bottle formatsDimensions: 1600 mm width, 1420 mm length and 2200 mm maximum heightWeight: approximately 1800 kgThe machine is suitable for 0.75L Burgundy bottles with an 81.5 mm diameter and 299.5 mm height, as well as 0.75L Bordeaux bottles with a 74 mm diameter and heights from 308 mm to 3 ...

Dixi 50 S – Vertical Baler Year: 2004 General: Type: Vertical baler for paper, cardboard, foil, PET, textiles, and other recyclable materials Pressing force: 50 t Drive: 7.5 kW electric motor, 400 V / 50 Hz Control: Microprocessor-controlled with programmable settings Bale Performance: Cycle time: ~41 seconds Press time: ~23 seconds Bale size (L × W × H): 120 × 80 × 80–110 cm Bale weight: 350–500 kg (depending on material) Feeding opening: 1200 × 670 mm Dimensions &, Weight: Machine size (L × W × H): 1600 × 1300 × 3100 mm Transport height (lowered): 2240 mm Approximate weight: 2,050–2,180 kg Operation &, Features: Manual bale strapping Automatic start when feed door closes Hydraulic ram return and full bale ejection Adjustable press time and bale size Optional extras: dust-extraction connection, hydraulic door opener Type: Vertical baler for paper, cardboard, foil, ...

pressure: 320 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 140 mm/sec work speed: 10,5 mm/sec return speed: 150 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 900 mm table width: 220 mm oil volume: 400 ltr. voltage: 380 Volt total power requirement: 30.0 kW weight: 21300 kg range L-W-H: 5350 x 2450 x 3150 mm Features: - DELEM DA66T CNC control system - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, as well as CNC crowning - FIESSLER AKAS laser safety device in front of the machine (including FPSC) - Rear safety device: light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - 2 front support arms - 1 freely movable dual foot control - Upper and lower tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26219 Technical data: - Saw blade dimensions 3375 x 27 x 1.1 mm - Cutting speed infinitely adjustable 18 - 100 m/min - Hydr. Cutting pressure regulation - Hydr.- Lifting + lowering of the saw frame - Machine table left + right swivel for mitre cuts - Cutting area - at 90° around 255 mm - Square 240 mm - flat 300 x 180 mm - at 45° around 210 mm - flat 200 x 160 mm - at 60° left about 135 mm - Max. opening width of the vice 310 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 2000 x H 1500 x D 2100 mm - Weight approx. 990 kg with - Feed roller conveyor 5000 mm - Discharge roller conveyor with dimension stop 5000 mm

SIDEL SAMETO Technifill pallets tipper for preforms type EBHS 2050 LD BM 1400 designed for pallets containing preforms feeding the preforms hopper PET blowing machines Suitable for Sidel SBO Universal machines and also other makes New never used Equipment stored and available immediately

1 item 140-MN-0250 1 pc 140-MN-2000 1 pc 140-MN-1600 1 pc. speaker + shoe KTA 3-25

Glovecheck by color sensitive scanning with high frequency vision camera., Cutting height: 420 mm, Cutting width: 390 mm, Saw blade: 3290 x 16 x 0.56 mm, Compressed air: 6 - 7 Bar, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 1100 x 1150 x 2050 mm, Weight: 360 kg

Prints and applies labels to the underside of packs, The VWS LPX Blow 4/300R prints a label and blows it onto the pack from below as it runs across the belt. Useful for trays and tubs whose top has to stay clear, or when you want information on the bottom as well as a top label., The machine was built in 2014 and sits on a stand with an 800 mm belt. It runs on 230 V., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vws-lpx-bottom-labeller/, Type: Bottom labeller (print & apply), Application: Blow applicator from below, Belt: 800 mm, on stand, Electrical: 230 V, 50–60 Hz

Overview SIG Corpoplast BLOMAX 18 Series III rotary stretch blow moulder for PET bottles, built in 2003. Rated output is up to 27,000 bottles per hour on 0.5, 1.0 and 1.5 L bottles and up to 24,300 bottles per hour on 2.0 L. The machine last produced 1.0 L bottles for mineral water and carbonated soft drinks at 27,000 bottles per hour with a PCO 1881 neck finish. It ran in production until August 2026 and is still installed and under power. The preform feeding (box tipper, inclined elevator and unscrambler) and the chiller are part of the sale. Technical data Manufacturer: SIG Corpoplast Model: BLOMAX 18 Series III Year of construction: 2003 Machine type: rotary stretch blow moulder for PET bottles Rated output: max. 27,000 bottles per hour on 0.5 / 1.0 / 1.5 L, max. 24,300 bottles per hour on 2.0 L Last format: 1.0 L bottle, 32 g, 28 mm PCO 1881 neck finish, petaloid base Blow air press ...

Serviced Continuous Butter Making Machine (CBM) equipped with a new Rittal control panel with simple and user-friendly controls. Stainless Steel frame execution. The machine is designed for the continuous production of sweet butter from cultured and / or sweet cream and is suitable for hygienic dairy processing applications. The CBM has a butter production capacity of approximately 3.000 kg per hour and is designed for an input of approximately 6.000 litres of cultered or / and sweet cream per hour (38/42% fat, pH of 4,5/4,8 and infeed temperature ± 10 - 13 °C). Completely electrically driven; Churning cylinder / Beater I: 37 kW, Churning cylinder II: 3 kW and Squeezer / Working section: 11 kW., The machine is equipped with a new Rittal electrical control panel, incorporating simple and clearly arranged controls for the main machine functions. The control panel includes:, - 3 x Danfoss ...

CONTROLS   CNC controls BLM VGP 3D TECHNICAL SPECIFICATION   Max. diameter of tube: 28 mm   Max. wall thickness: 1.5 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 3400 mm   space requirements -front/back-: 1100 mm   total height: 1500 mm   total weight approx.: 1850 kg Stainless steel max. 20 mm diameter CNC control with VGP 3D software

pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 200 mm/sec work speed: 10.0 mm/sec return speed: 120 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90.0 mm control: DELEM oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11.0 kW weight: 8650 kg range L-W-H: 4250 x 2050 x 2800 mm Very good condition () Current new price: 75.0000 Euros Special price on request --------------------------------------------------------- POWER BEND PRO electro-hydraulic press brake featuring: Increased daylight opening (installation height) Increased cylinder stroke Increased throat depth --------------------------------------------------------- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control DA 56 - 2D graphics Bending sequence calculation Product/tool library USB interface - ...

cutting diameter: 220 mm saw band length: 2455 x 27 x 0,9 mm cutting width: 230 mm cutting speed: 35-74 m/min m/min total power requirement: 1,2 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 1,6 x 0,9 x 1,8 m The GBS 218 Eco AutoCut is a precision miter band saw designed for use in workshops and light industrial settings. It is ideally suited for cutting steel, stainless steel, and aluminum profiles, combining a powerful range of features with user-friendly operation. Thanks to the integrated AutoCut system, the machine offers three selectable operating modes: automatic saw frame lowering with adjustable feed rate, rapid approach to the workpiece, and manual operation with a braking cylinder function. This versatility makes it ideal for a wide variety of sawing requirements. Key features: - Miter cuts up to 60° to the left - Two-stage selectable cutting speed: 35 +  ...

BOBST SP 102 E - Car plates year 1984 82,500 running hours max. size 740 x 1,040 mm min. size 350 x 400 mm max. speed 8000 sheets / hour max. cutting force 250 T manual non–stop feeder 1 pull side lay guide o.s. 1 cutting chase with quick lock 1 cutting chase without quick lock 1 cutting plate 4 mm and 1 cutting plate 5 mm Centerline Micrometric device (1mm plates) stripping section 1 set stripping frames (quick lock) with tools in production good condition (upgraded)

Handles the full spectrum of blade types — bi-metal, carbide, wood, and stainless steel — up to 50 mm clamping width, covering blade dimensions from 6×0.40 mm up to 54×1.60 mm on bi-metal stock. At 25 kVA with 38 kN clamping force and 10 kN upsetting force, it delivers consistent, high-integrity welds across carbon and stainless steel strip with max. cross-sections of 150 mm² and 60 mm² respectively. The fully automatic welding and annealing cycle is recipe-controlled via touch panel — operator inserts the blade, hits start, and the machine handles the rest. Robust pneumatic clamping, water-cooled electrodes, and a 800 kg industrial frame make this a workhorse for sawmills, blade service centers, and large metalworking operations. Make and Model iDEAL BAS 320 Nominal output (50% DC) 25 kVA Secondary voltage 2.8 – 5.5 V (6 stages) Control voltage 24 DC Clamping force 38 k ...

Bunker and transport system, consisting of: - (2x) VEB Wägetechnik Weimar bunkers, type: K961, number: 4228, inside dimensions: 1780 mm x 1780 mm x 900 mm, - (1x) Transport belt, rubber belt, belt width: 690 mm, total dimensions: 9400 mm x 1100 mm x 800 mm. Total dimensions installation: 12550 mm x 3400 mm x 4850 mm.

Batch weigher, consisting of: elevating belt, plastic belt with dividers, belt width: 350 mm, 220 mm, divider height: 50 mm, distance between dividers: 90 mm, elevating height: 1700 mm, and Rewa weighing scale, type: 83Z, min/max weight: 0.04/60 kg, dimensions scale: 770 mm x 440 mm x 520 mm, total dimensions: 3200 mm x 1000 mm x 2130 mm.

Standard configuration Machine ⦁ Box frame ⦁ Press beam ⦁ Spherical bearing of the press beam with press beam tilting ⦁ Electro-hydraulic upper drive ⦁ Block hydraulics ⦁ Distance measurement system (Y axis) with dynamic deflection compensation ⦁ Hydraulic oil filling (life-long filling) ⦁ Oil cooler Crowning ⦁ Self-regulating, combined crowning Backgauge ⦁ Gauge fingers (2 pieces) Tool clamping ⦁ Manual upper and lower tool clamp Control ⦁ T3500T Multi-Touch machine control ⦁ Integrated TRUMPF technology data Data transmission ⦁ USB interface ⦁ RJ45 network interface Operation ⦁ Operating unit with foot switches Safety ⦁ CE marking ⦁ Standard safety device Additional equipment Crowning ⦁ CNC crowning Backgauge system ⦁ 5-axis backgauge system : R1, Z1, Z2, X1, X2 (Delta X) Tool clamping ⦁ Hydraulic upper tool clamping Contr ...

Masonry Aging System The Masonry Aging System creates uniquely aged faces and backs for standard, architectural, and retaining wall units. The aging process is totally random and adjustable. A variety of aged looks can be created by altering the speeds of the impactor heads, the rotation speeds of the clamps, and the amount of time the unit is held under the impactor heads. Video on request.

Technical description : 2 UNITS SCRAP CONVEYOR SYSTEMS consisting of: - First unit being approx. 35 meters length - Second unit being approx. 40 meters length - Each having a drive unit, gearbox, reversing station - Conveyor width is approx. 1100mms - Conveyor height is approx. 1200mms. Both units were professionally dismantled, cleaned and stored carefully into containers in our warehouse in D-57258 Freudenberg some 140 km north of Frankfurt International Airport

spindle diameter:130 mm spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-travel:1000 mm w-axis:1075 mm table surface area:2000 x 1800 mm workpiece weight max.:8000 kg spindle turning speed range:4,5 x 900 U/min spindle taper: ISO:50 faceplate turning speed range:4,5 x 180 U/min faceplate diameter:785 mm rapid traverse::5000 mm/min total power requirement:40 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,5 x 6,9 x 5,2 m Machine retrofit and overhould with TNC 360 Heidenhain in 2023 and stepless spindle speeds - table indexing 4 x 90° - facing head 785 mm - exhauster - various arbors and tooling

cutting diameter:430 mm saw band length:5800 mm cutting width:54 mm total power requirement:11 kW weight of the machine ca.:2,1 t dimensions of the machine ca.:ca. 4,10 × 2,30 × 2,10 m Behringer HBP 430N ? Robust double-column band saw for professional use The HBP 430 N is a high-performance horizontal double-column band saw designed for industrial use, offering impressive cutting precision, robust construction and reliability. It is ideally suited for use in mechanical engineering, steel construction, metal fabrication, as well as in manufacturing and metalworking workshops. With a cutting range of up to Ø 430 mm or 600 × 430 mm at 90°, both solid material and tubes and sections can be processed cost-effectively. A working area of 320 × 430 mm is available for mitre cuts up to 45°. The infinitely variable cutting speed, ranging from 17 to 110 m/min, allows for optimum adaptation  ...

bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:80 mm total power requirement:1,1 kW weight of the machine ca.:195 kg dimensions of the machine ca.:530 x 650 x 1850 mm spindle speeds::355, 710, 1400, 2800 U/min Table dimensions:340 x 280 mm

spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-axis:1520 mm w-axis:1000 mm table surface area:2000 x 1800 mm workpiece weight:8 t spindle motor:18 kW spindle taper ISO:50 spindle turning speed range:4,5 - 900 U/min faceplate diameter:785 mm rapid traverse:5 m/min total power requirement:40 kW dimensions of the machine ca.:5,5 x 6,9 x 5,2 m weight of the machine ca.:35 t Machine was retrofitted in 2023 with HEIDENHAIN TNC 360 CNC control - inf. variable spindle spped - 4 x 90° table positioning - diverse toolholders - dDust exhauster

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

NEW, 140 cm wide, with Martin M10 mount, 123 kg net weight, suitable for 5.6 - 9.0 t excavators

Miter adjustment and roller conveyor. Cutting range up to Ø 230 mm or 310 × 200 mm. For more details, see photo. Machines are generally offered without documentation. If documents are available, they will be attached to the respective machine.

Bioreactor Manufacturer: Sartorius Type Biostat CultiBag RM 50 and Type DSO50LORM Year of construction 2008

7 head , 70 keg/h from 4.27 Free, good condition uwemetzlerdingslebener

<br>AGFA APIS-Board Rev. A5. For AccuSet 800 / 1000 and Avantra 25<br><br><br>br>Verf Gbar: now

<br>AGFA APIS-Board Rev. B2. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44-E/S/XT)<br><br><br>br>Verf Gbar: now

<br>AGFA APIS-Board UPAC - for old and new PCs (3, 3V and 5V) - for all AccuSets (800/1000/1500 normal & plus), all Avantras (20/25/30/36/44-E/S/XT) and all Galileos (YAG/VS/Thermo)<br><br><br><br>Verf Gbar: now

R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement