126,769 used machines on RESALE, but how to find them? Machine Search
Wide belt Sander Brand: Bütfering Model: AWS 3 Year of construction: 1989 Working width: 1350 mm 1 x Calibration roller 1 x Combi unit ( roller + grinding shoe ) 1 x Sanding shoe 1 x Cleaning brush Location of the machine: Customer location / Abroad
Equipment: 1 sledge feeder on the right 3 press modules á 180 kN = 540 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 10 mm Belt width: up to 100 mm Feed length: up to 250 mm Power: up to 132 rpm
Equipment: 1 sledge feeder on the right 1 two-point eccentric press 70 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 3.5 mm Bandwidth: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm
Equipment: 1 sledge feeder on the right 1 two-point eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 5.0 mm Belt width: up to 40 mm Feed length: up to 320 mm Power: up to 132 rpm
used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2011 Machine no.: 407.00.360 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200
used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2014 Machine no.: 413.00.016 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200
Qty. 1 Second-hand cast house for billet production incl. filtration system Mfc.: Gautschi, Mechatherm, Weishaupt, PEHAKA, FISONS, Dantherm Filtration GmbH Built: Unknown The machine is very strong design and still running well because it has been maintained always with original spare parts and qualified experts. Direct casting on a vertical table and make billets of 6'' and 8''. To make 9'' the tool of the table can be modified. The vertical caster can work with 9'' by remachining and modifying the tool table. 1 Melting and Tilting furnace GAUTSCHI, Capacity 20 T, Fuel Oil Burners The furnace has an elevator charging machine to load the scrap from the top of the furnace Degassing unit FILD from MECHATHERM England Nitrogen treatment and filtering 1 Vertical caster for billets 26 x 6’’ and 20 x 8’’ for useful log length 6 m 1 Homogenizing furnace, Fuel Oil Burners Weish ...
used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2014 Machine no.: 413.00.024 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200
sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 40 t, 1030 mm
For sale is an automated press brake with 1st hand robot system for serial sheet metal part forming. Press brake 2019 BYSTRONIC Xpert 40/1030 Robot 2019 KUKA KR10R 1100 sixx Specifications Press brake - Press force: 400kN (40t) - Working length: 1030mm - Control: ByVision Robot - Max. nominal load capacity: 11kg - Reach: 1100mm - Axles: 6-axle - Position repeatability: 0.02mm - CE certified safety modules Characteristics - Fully automated bending cell with integrated 6-axis industrial robot - from 1st hand - Dimensions (LxWxH): approx. 3.25m x 2.8m x 2.5m - ByVision Bending control terminal with 22-inch Full HD touchscreen Machine condition - Operating hours: 7,724 h - Cycle counter: 310,212 - Complete service history, regular inspections - Technically perfect condition - Functional test: can be demonstrated during inspection - Location: Niederroh ...
Bevel helical gearboxes Manufacturer : Bonfiglioli Model : A 504 UH50 P90 LOE engine: Euromotori 1,1kw MS9016Year of construction 2008 NEW, unused from old stock for more information see pictures.
High pressure air compressor Belliss and Morcom High pressure air compressor Belliss and Morcom type: VH9H3N serial no. R188660 year of manufacturing: 2005 maximum working pressure: 40bar capacity: 580 m³ / h incl. pressure tank incl. cooling system / chiller
Filling and closing Bloc BKM type: Varifill VF 32/8 PET with 32 filling valves and 8 head plastic screw capper with pick-and-place system year of manufacture: 2001 with Siemens S7 electric incl. Touch Panel with neck-handling system
Cold glue adhesive binder Planax Perfect Binder F II; condition as is; only tested for function; Max. Block length 380mm; Max. Block thickness 40mm; Max. Block height 350mm; with milling machine and suction. Perfect binder Planx Perfect Binder F II; condition as is; only checked on function; max.lenght 380mm; max.thikness 40mm; max.hight 350mm; with mill and vacuum device.
Balers, Bramidan X30 LP, 30 to. Pressing force - used, as new - : Price from location: only 12.750.-€ (net) Manufacturer: Bramidan Type: X30 LP Year of construction: 2024 Bale size WxDxH (mm) 1200 x 800 x 800 Filling opening WxH (mm) 1090 x 530 Cycle duration avg. (s) 25 Dimensions WxDxH (mm) 1760 x 1255 x 1995 Weight (kg) 1450 Stroke (mm) 950 Number of Ties 4 Type of lacing ribbon / steel wire Automatic bale ejection Bale weight: Cardboard (kg) 225-325 Plastic film (kg) 275-375 Press force 30 t Types of recyclable materials: Cardboard, plastic film, paper, PET bottles, aluminium cans, tin cans, hard plastic, textiles, polystyrene. Noise level 59-60 dB Low Raw Material Press with High Press Pressure Suitable for many different recyclable materials Low overall height High pressing pressure Very low noise level Up to 80% savings of: volume, space, transpo ...
cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fully automatic bread slicer MHS Type: MHS BASIC L Technical data: Cutting Gate Bread Slicer Cutting thicknesses: 10 mm Bread passage: H 17 cm x W 45 cm x D 34 cm Bread rack to bag 230 Volt / 0.75 kW / 3 A Weight: 200 kg Total dimensions: H 114 cm x W 59.5 cm x D 73 cm Mobile on 4 pulleys with 2 brakes Cuts almost all types of bread (including yeast braids) Soft feed for particularly gentle cutting Lubrication without oil pump Minimal maintenance costs due to high ease of maintenance Simply click out the used felt and dispose of it The new felt is simply hooked into the existing guide Year of Make: 2015 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.
Broma Milk Roll Pusher Milchweck / dough piece pusher for manual assignment / one-man operation Pressure setting adjustable long discharge belt Tabletop unit DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty
Microbrewery – Brewiks 500 L, 760 L/brew, 5,000 L/month – 2017 This is a complete two-vessel microbrewery, installed in 2017, equipped with all essential components for brewing, fermenting, and packaging beer in glass bottles. It is ideal for small- to medium-scale production. The main unit is a Brewiks 500 L two-vessel system, comprising two multifunctional tuns: • Mash Tun / Boiler / Pasteurizer • Lauter Tun / Sparging / Whirlpool Both vessels have been modified by Mithreum, including the addition of a manhole for easier spent grain removal. The Mash Tun / Boiler has a maximum capacity of 760 liters and can produce two brews in 8–11 hours, depending on the beer type. The current monthly capacity is approximately 5,000 liters, limited by fermenter volume. If higher output is needed, the Brewiks 500 system can be upgraded with a Brewiks PLUS module (an additional bo ...
Braumeister Micro Brewery System – 500 L The Braumeister is a fully automated brewing system designed for simplicity of operation, ease of cleaning, and reliable performance. It features a five-step automated control process that streamlines the brewing cycle and ensures consistent results. The 500-liter system is well suited for small commercial applications such as bars, cafés, and pilot breweries, as well as for highly experienced home brewers. The unit is supplied with integrated wheels and a hoist for ease of handling. It has a compact footprint, fully automated operation, and a jacketed vessel for efficient cooling. The system also includes a whirlpool function, making it a comprehensive solution for small-scale commercial brewing. Technical Characteristics Manufacturer Speidel GmbH Model Braumeister 500 Litre Manufacturing year 2016 Capacity approx. 500 l fin ...
Beer Brewery Two Vessel VELO 15hl/brew, up to 4000hl/annum Complete two-vessel beer brewing line manufactured by Italian VELO (now part of TMCI Padovan), suitable for producing a wide range of beer styles—from ales and lagers to non-alcoholic beers and high-strength varieties such as Imperial Stouts over 10% ABV. The standard brew size is 1,500 liters, with the capability to produce two brews during a 10-hour day in peak season. The maximum malt load per batch is 600 kg. Without sugar addition, wort strengths range from 18.5° to 21° Plato; with sugar addition, up to 35° Plato. A complete brew cycle, including CIP, takes approximately 5–6 hours. In regular operation, brewing batches have been overlapped: once lautering and spent grain removal from the first batch is complete, the next brew begins. With 10-hour working days, the maximum weekly capacity is six brews (three ...
3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881
BHT INNOVA E3 Professional Bronchoscope Washing Machine INNOVA – Professional endoscope washing machine for practices and small clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washing machine. This endoscope washing machine is compact, offers a high capacity for endoscopes or bronchoscopes. Depending on the treatment, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for general practitioners and small clinics that value safe hygiene, efficiency and reliability. Item condition: used
This plant is currently intact and fully connected. The footprint is rectangular and measures approximately 9x5 metres (not including the steam plant, which is in a separate building, adjacent to the brewery). All brewery pipework is stainless steel with clamp-type connectors. The Vessels are all 1,250 litres (except for the glycol tank). - Hot Liquor Tun with level sight. - Mash Tun with wedge-wire filter and powered rakes; inlets for sparge; CIP and Vorlauf. - Combined Copper / Whirlpool with 2 x outlets; exhaust condenser; CIP ball. - Glycol Tank; 2,500 Litres. - 5 x Cylindro-conical, insulated fermenters with CIP, pressure gauge, sample outlet, spunding valve, racking and base outlets. - Side and top-entry access door. - Bright Beer Tank. Spec. as fermenters, but without the conical base. - 2 x Glycol Chillers. - Two Stage Heat Exchanger (water/glycol) with clamp-typ ...
Second hand ABUK 5 BBL Brewery System System consists: - 5 BBL Hot Liquor Tank; electric heating element. - 5 BBL Cold Liquor Tank; 1000 litre square IBC, plastic. - 5 BBL Mash Tun; drilled-plate floor, re-circulation & thermo-well. - 5 BBL Kettle designed for WHOLE FLOWER HOP; low-level thermo-well; electric heating elements. - (2x) 5 BBL Fermenting Vessels; sample taps; extension legs; racking outlet. - Under-back. - Hop Seed Strainer. - Plate Heat Exchanger. - Fixed / welded / partially flexible brewhouse pipework. - Brewers Hoses. - Butterfly & Diaphragm Valves. - (3x) Pumps & Pump Adaptors. - Remote Ice-bank Cooler with internal heat dump. - Electrical Control Panel. SECOND HAND SOLD AS SEEN. For more information and more available stock please visit us at - advancedbrewing.co.uk
10BBL Brewery Complete Brewery Consisting of : 10 Brl Brewhouse (Hot Liquor Tank, Mash Tun with Underback and Kettle/Copper) built and installed by Johnson Brewery Designs in 2011. The brew house is powered by immersion heaters and requires a 3 ph (415v) electricity supply. The Majority of brewery pipework is hard piped and integrated with Brewhouse pumps, includes in-line hop seed filter, 10 Brl per hour Heat Exchanger (previously operating on 11ºC well water) and able to chill wort down to 18ºC The Wort kettle is set up to use whole hops Grist Case. 350 kg capacity with 8m x 4” auger tube ( 2 tonne per hour) feeding to grist hydrator. Typical mashing in time 12min to 14min HWT: Gross Capacity 2,500, Temperature controlled with recirculation pump. 2 x 12 kW Immersion elements. Top manway access for additions. Overflow Pipe. Mash Tun: Maximum Grist capacity 500 kg. ...
Standard equipment: robust, high-quality and inclined rotary hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop infinitely variable speed control Connection cable with SCHUCO plug (1.2 m) Undervoltage outlets Drilling protection with electr. Hedge thermal overload protection Emergency Stop Impact Button Weight in kg: 44 Motor kW: 0,45 AC 230 V Speed 1/min: 250-3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Projection 220 mm - Saeulen diameter 70 mm - usable table area (W x L) 300 x 250 mm - T-groove size number 2, distance 100 mm Dimensions width 14/26 mm - Spindle B 16 - Speed display digital - Drilling depth display: scale - Drill depth stop: quickly adjustable stop ring - Feed: by hand - FACTORY WARRANTY: 3 years - free domicile incl. packa ...
Bottle Filler, make WüMa, typ: BAD 20/4, with 20-valve pressure filler and 4-head crown capper, built 1977
Key data: 430 mm, 5200 mm
Band saw machine Bauer SA 430 ZA with accessories Year of construction 2009 Serial number 09-98002 Space requirements: Dimension L 3110 mm W: 2210 mm H 2400mm Total machine weight approx. 2,500 kg Electr. Connection 400V Motor power 4 KW Coolant pump yes Hydraulic pump yes Sawing area: 430mm Saw blade dimensions 5200 x 43 x 1.3 mm Cutting speed: Infinitely variable Saw blade guide: deflection rollers and carbide jaws Material tension: hydraulic Saw frame stroke: hydr. Cutting pressure control Material feed: manual, hydr, automatic pliers Accessories: roller belt, chip conveyor, express lowering, preselection of cutting pressure and force via touchscreen on the control panel, storage for cut parts, saw blades >5 pieces, SIGMA 5200x43x1.3 mm available Ready to use.
approx. 560 pieces shelves for shelves / Berger, type Bert, 1m and 1,30m x 0,50m, 150kg, various - used - : Price per shelf: 9.-€ (net)! Minimum order: 50 pieces Manufacturer: Regalwerk / Berger Type: Bert Year of construction: approx. 2019 Depth: 50cm Width: approx. 1.30m = 540 pieces Width 1m = approx. 20 pieces Height: approx. 4cm Payload: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: as of now Location. Frankenberg / Saxony
Brand BENDMAK Type CYL-ST-170-20-5,0 Working lenght 2100 mm Pre-Bending 5 mm Max Thickness 5 mm Top Roll 170 mm Min Bending 255 mm Motor Power 4 kW Bending Speed 4,8 m/min. Dimensions L x W x H 4000 x 1100 x 1130 mm Weight 2300 kg Year 2015 Extra information Cone Bending device Induction hardened rolls Motorized Up and Down movement of the Back Roll Digital readout for Displaying positions of the Back Roll 2 Separte Control Units Cast Iron Body
used
offer 22489 Specifications: - Cutting range at 90° approx. 320 m - flat 320 x 320 mm - Material replenishment machine - Band saw blade dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - hydr. Lifting – lowering the saw frame - upper stroke limitation of the saw frame - Cutting pressure infinitely adjustable - hydr. Material clamping pole - Chip conveyor screw - Coolant device - Discharge roller conveyor 2500 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg
new
New Neu Anlasser / Bosch Starter 0001601007 Passend für die Motoren DEUTZ / MWM / Caterpillar Energy Solutions Typ TBG 620(k) und TCG 2020.
Dear customers currently we offer you a used tape saw of the brand F. Zimmermann. Here are the technical data of the machine: Work table: 750 x 750 mm Cutting width: 775 mm Super cutting height: 640 mm Table swivel: 45/10° Roll diameter: 800 mm Power: 4 kW Speed: 1,500 rpm - with engine brake Cutting speed: 1,400 rpm Door safety switch Machine is CE compliant! Dimensions: 1,370 x 850 x 2,950 mm Weight: approx. 850 Kg Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not hesitate to contact us.
Center height: 120 mm Center width: 450 mm Spindle passage/bore: 23 mm Board width: 100 mm Speeds: (12) 180 - 2240 min-1 Travel upper carriage: 140 mm Tailstock mount: MK 2 Quill stroke: 80 mm Motor power: 2.5 kW Connection: 400 V Dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Piercing device Quick release holder System Multifix, size Aa Machine light Coolant device
Manufacturer: BUSCH Type: RA 0250 D 5ZI QMZZ Capacity: 250 m3/h Vacuum pump BUSCH Typ RA 0250 D 5ZI QMZZ- USED - OVERHAULED Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT No.: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36 infointer-wiba.com.pl abc.inter-wiba.com.pl
used
TSUGAMI B0385L Swiss-Type CNC Sliding Headstock Lathe Year: 2014 Condition: Tooling included (as shown in photos) Specifications subject to buyer verification Machining Capacity • Max barstock diameter: 32 mm • Max machining length: 100 mm • Max main spindle drilling diameter: 13 mm • Max main spindle tapping: M12 • Max back spindle chucking diameter: 38 mm • Max back spindle drilling diameter: 12 mm • Max back spindle tapping: M12 • Max cross drilling diameter: 10 mm • Max cross tapping: M8 • Max tool spindle slotting cutter diameter: 45 mm Spindle Speeds • Main spindle speed: 200 – 6,000 RPM • Back spindle speed: 200 – 7,000 RPM • Tool spindle speed: 200 – 5,000 RPM Tooling & Axes • Total tool capacity (standard): 20 tools • Tool size: 20 × 20 × 125 mm • Controlled linear axes: 5-axis Ra ...
Dear customers currently we offer you a used and very massive tape saw of the brand Bäuerle. Here are some technical data of the machine: Work table: 1,000 x 820 mm Cutting width: 765 mm Super cutting height: 520 mm Table swivel: 45° Roll diameter: 800 mm Power: 3 kW Speed: 1,400 rpm Dimensions: 1,500 x 820 x 2,500 mm Weight: approx. 900 kg All information without guarantee! VAT will be shown separately on the invoice. Shipping possible against surcharge. No guarantee and/or warranty on used machinery and accessories. If you have any questions, please do not hesitate to contact us.
Dear customers currently we offer you a used tape saw of the brand F. Zimmermann. Here are the technical data of the machine: Work table: 1,150 x 750 mm Cutting width: 775 mm Super cutting height: 640 mm Table swivel: 45/10° Roll diameter: 800 mm Power: 4 kW Speed: 1,500 rpm - with engine brake - motorized table and guide adjustment -Digital Cutting speed: 1,400 rpm Dimensions: 1,370 x 850 x 2,950 mm Weight: approx. 850 Kg Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not hesitate to contact us.
Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany
Bread slicer Treif Diskus 400 Bäko Line circular knife -Circular knife bread slicer Treif Diskus 400 -with new knife -digital control - Cutting width adjustable from 3mm to 15mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Rated power 0.9 kW - Years of construction 2007 to 2012 External dimensions : width 80cm depth 70cm height 112cm
Brochure production Bourg ARG-T, PA-T, TR-t Heften Bourg ARG-T Folds Bourg PA-T Scneiden Bourg TR-t Hohner stitching heads
The machine is in good technical condition, after prior agreement it is possible to test it. - Nominal forming force: 120 t Working length: 3106 mm CNC control Delem (graphic 2D programming) Automatic calculation of bending sequence and collision detection Back gauge X axis with 2× manually adjustable stop fingers CNC electromotive height adjustment of the back gauge (R axis) CNC electrically controlled table deflection Upper tool adapter ROLLERI Equipment and accessories: - Front protective device (tilting door) - Rear protective device (sliding door) - 1× freely movable two-hand / foot control - Operating instructions including CE declaration
MAX TRUNK DIAMETER 700 MM SUBSTRUCTURE LENGTH 6000 MM CUTTING LENGTH OF 4.8 METERS 5.5 KW MOTOR HYDRAULIC BELT TENSIONING
MAX TRUNK DIAMETER 1200 MM - CUTTING LENGTH 7800 MM - 11 KW/15 HP ENGINE - PRE-CUTTING AGGREGATE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 400 V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - horizontal / vertical cutting head spacing in one cut - 1150/280 mm - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,800 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 1200 by turning
maximum number of results exceeded
please refine your search
