ay used for sale

Ayen Knothole Drilling Machine ED 08-4, Machine No.:270 316, 0,6kW, 380volt, 1420 rpm,

cutting diameter: 235 mm dimensions of saw-band: 2480 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 45/90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 400 Volt total power requirement: 1,1 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 280 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 70 - 2000 U/min centre height: 195 mm spindle bore: 54 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 225 mm saw band length: 2455 mm table height: 850 mm cutting width: 245 x 150 mm cutting speed: 45/90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm : 90 mm : 90 mm : 145 mm Impact energy: 145 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,2 t dimensions: 1,43 x 0,72 x 1,7 m Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various old woodworking machines are available. 1) Joos triple veneer press. 2) Frommia FS 60 post router, year of manufacture: 1985. 3) Schwabedissen planer. 4) Column drilling machine Ayen. On-site inspection is possible.

Precision dowel boring machine. Pneumatic clamping, 2 drilling units, swivelling (0-90 degrees). Working width approx. 1200mm. Inspection possible by appointment.

KNITTING PLATE FOR ERIKA REKORD SEMI-AUTOMATIC SIZE 2 30 PCS ( 3 pieces )for all semi-automatic machines size 2 very high quality product made of very durable plastic30 pieces5 mm thickDetails see picture

FORTUNA KNITTING PLATE SIZE 4( 3 pieces )For fully and semi-automatic machines of the manufacturer Fortuna size 4very high-quality productmade of very durable plastic30-piece5 mm thickDetails see picture

KNITTING PLATE Â for ERIKA REKORD BEAN-TO-CUP MACHINE SIZE 2 ( 3 pieces )for all bean-to-cup machines size 2 very high-quality product made of very hard-wearing plastic30-piece5 mm thickDetails see picture

KNITTING PLATE Â for ERIKA REKORD FULLY AUTOMATIC MACHINE SIZE 3 ( 3 pieces )for all fully automatic machines size 3 very high quality product made of very durable plastic30 pieces 30-100g5 mm thickDetails see picture

turning diameter over bed: 400 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 570 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 3,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used dowel drilling machine Ayen Type DB 1000-B23 for drilling operations in the production of dowel joints in woodworking. The machine features a working width of 720 mm, a maximum clearance of 820 mm and different drilling depths for vertical and horizontal machining. Technical data: Working width: 720 mm Max. clearance: 820 mm Drilling depth, vertical: 45 mm Drilling depth, horizontal: 120 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Mitre band saw mitre cuts up to 60° left-vise with quick-release device-belt tension control-electr. Automatic cooling Cutting diameter 225 mm Saw blade length 2455 mm Table height 850 mm Cutting width 245 x 150 mm Cutting speed 45/90 m/min Saw blade dimensions 2480 x 27 x 0.9 mm Cutting capacity at 60° round 90 mm Cutting capacity at 60° Square 90 mm Cutting capacity at 45° Round 145 mm Cutting capacity at 45° Square 145 mm Connection voltage 400 volts Total power requirement 1.5 kW Machine weight approx. 0.2 t Dimensions L x W x H 1.43 x 0.72 x 1.7 m Condition: never used / new (5) Auction-ID: A7-51438-462

• Scenic lighting, exterior architectural • 40 x 10W FCW LEDs (Red/Green/Blue/White) • 10,000 lumens • Opening angle: 11° can be changed using the 42° filters provided • Optional 60° and 80° diffuser filters available • Blinder effect, strobe effect, matrix effect • Individual control of each module of 10 LEDs • Standalone and master/slave modes • 9 DMX modes: 4 – 5 – 8 – 9 – 12 – 16 – 16 – 17 – 24 channels • Addressing: Integrated – RDM • Control: DMX 512 – Wireless W-DMX receiver • Connectors: XLR5 in/out – PC16 • IP65 • Included accessories: 2 omega mounts, power cable and transport flight case Auction-ID: A1-50934-321

• Scenic lighting, exterior architectural • 40 x 10W FCW LEDs (Red/Green/Blue/White) • 10,000 lumens • Opening angle: 11° can be changed using the 42° filters provided • Optional 60° and 80° diffuser filters available • Blinder effect, strobe effect, matrix effect • Individual control of each module of 10 LEDs • Standalone and master/slave modes • 9 DMX modes: 4 – 5 – 8 – 9 – 12 – 16 – 16 – 17 – 24 channels • Addressing: Integrated – RDM • Control: DMX 512 – Wireless W-DMX receiver • Connectors: XLR5 in/out – PC16 • IP65 • Included accessories: 2 omega mounts, power cable and transport flight case Auction-ID: A1-50934-323

• Scenic lighting, exterior architectural • 40 x 10W FCW LEDs (Red/Green/Blue/White) • 10,000 lumens • Opening angle: 11° can be changed using the 42° filters provided • Optional 60° and 80° diffuser filters available • Blinder effect, strobe effect, matrix effect • Individual control of each module of 10 LEDs • Standalone and master/slave modes • 9 DMX modes: 4 – 5 – 8 – 9 – 12 – 16 – 16 – 17 – 24 channels • Addressing: Integrated – RDM • Control: DMX 512 – Wireless W-DMX receiver • Connectors: XLR5 in/out – PC16 • IP65 • Included accessories: 2 omega mounts, power cable and transport flight case Auction-ID: A1-50934-324

• Scenic lighting, exterior architectural • 40 x 10W FCW LEDs (Red/Green/Blue/White) • 10,000 lumens • Opening angle: 11° can be changed using the 42° filters provided • Optional 60° and 80° diffuser filters available • Blinder effect, strobe effect, matrix effect • Individual control of each module of 10 LEDs • Standalone and master/slave modes • 9 DMX modes: 4 – 5 – 8 – 9 – 12 – 16 – 16 – 17 – 24 channels • Addressing: Integrated – RDM • Control: DMX 512 – Wireless W-DMX receiver • Connectors: XLR5 in/out – PC16 • IP65 • Included accessories: 2 omega mounts, power cable and transport flight case Auction-ID: A1-50934-322

Manufacturer: AYCE Maquinaria S.A.L. – Spain Model: AC100-K4 Year of Manufacture: 1999 Serial Number: 744 Machine Type: CNC Horizontal Boring and Milling Machine Country of Origin: Spain 1. Technical Specifications Specification Value Spindle diameter 100 mm Spindle taper ISO 50 / MT5 (depending on configuration) Spindle speed range 12–1,200 rpm Number of spindle speeds 18 Horizontal spindle travel (W-axis) 700 mm Vertical headstock travel (Y-axis) 1,200 mm Longitudinal table travel (X-axis) 1,500 mm Cross travel (Z-axis) 1,700 mm Rotary table dimensions 1,100 × 1,200 mm Table rotation (B-axis) 360° Working feed rates 2–1,500 mm/min Rapid traverse (X/Y/Z) 3,000 mm/min Rapid traverse (spindle) 1,500 mm/min Electrical power 16 kW Electrical supply 380 V Frequency 50 Hz Approximate machine weight 12,700 kg Auction-ID: A1-51153-72

Professional Industrial Machine Digital Display 3-Jaw Chuck 200 mm.4-Jaw Chuck Face Washer Bezel Fixed Bezel Running Multifix Steel Holder. Machine light Foot brake Chip pan, chip protection wall Hardened and ground bed tracks Complete coolant system Chuck protection Machine feet Machine tool Turning diameter over bed 400 mm Turning diameter over support 260 mm Turning length 1500 mm Turning diameter in offset 570 mm Speed 45 - 1800 rpm Center height 210 mm Spindle bore 52 mm Tailstock quill mount MK 4 Connection voltage 400 V Total power requirement 3.5 kW Machine weight approx. 1.5 t Space requirement approx. 2.6 x 1.1 x 1.7 m Condition: never used / new Auction-ID: A7-51438-424

10x Ayra DanceFX professional mirror ball – 8x Ø50 cm + 2x Ø40 cm – new in box Specifications: Brand: Ayra Series: Dance FX Quantity: 10 pieces Condition: new in box Version: silver 8x Ayra DanceFX MB50-5x5: Mirror ball diameter: approx. 50 cm Mirror facets: approx. 5 × 5 mm Net weight according to packaging: approx. 5.1 kg per piece Packaging dimensions: approx. 520 × 520 × 520 mm each 2x Ayra DanceFX MB40-5x5: Mirror ball diameter: approx. 40 cm Mirror facets: approx. 5 × 5 mm Packaging dimensions: approx. 419 × 419 × 426 mm each Total: 10 mirror balls 8 pieces Ø50 cm 2 pieces Ø40 cm Features: Small mirror facets for fine light reflections Suspension eyes Suitable for mounting on a suitable mirror ball motor Suitable for events, hospitality, discotheques, stages and entertainment applications Particularities: New and unused, deliv ...