automatic used for sale

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Automatic Foamfoil - Packing machine EASY 250 Special The Easy 250 Special is wrapping your precious workpiece with a foamfoil. So the surface is protected in a perfect way, also in a hardpaper box. The wrapping is in throughfeed and independed of any different width. Made for Batch1. Different length and width in the mix ! The line is mainly existing of: -infeed transport belt with Servodrive for precise positioning, length 2800 mm -First welding station with fast positioning in the width -Center transport belt with Servodrive, length 2800 mm -Second welding station with fast positioning in the width Foil width top and bottom: 260 - 600 mm Foil roll diameter: top and bottom: 800 mm Foam foil thickness appr. 1,0 mm Workpiece length appr. 1500 - 2600 mm Workpiece width appr. 300 - 1400 mm Workpiece thickness appr. 35 - 90 mm

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

volumetrischer filling arrangement, filling area: 200 – 2,000 gs achievement: approx. 20 tacts min Durchlaufverschweissanlage model: 500 roles the foil strength of 25 microns to 600 microns flow speed: 5, 5 m / min

Herding® Multicoater Unused New, 3 pieces available e.g. film coats of tablets During the spraying phase, a very fine dust is produced during the film coating of tablets, which is extracted from the fluidized layer into a filter device with a defined air flow. The dust is sticky and without the precoating material forming a protective layer on the filter, the surface would stick very quickly. The Multicoater is a pneumatically operated dosing device and is usually operated with inert gas. It consists of a template container including control and conveying technology and is filled via a loading opening in the housing cover. The dosage is done via an injector pressure pump with a flow rate of 1.3kg/min. The MultiCoater has an internal control system that automatically controls the flow of the fluidizing, conveying and rinsing sequence.

Jäger self cleaning filter

Halbautomatischer pneumatically operated hand filler, ATEX compliant, any filling volumes from 20-1000 ml with different dosage piston, higher dosing volumes with multiple hub possible, suitable for filling liquid and semi-solid products

Separating hunters circular saws - machine with workpiece feed device. Machine is fully functional. Saw blade diameter 360 mm Workpiece dimensions 200 x 90 mm flat material Cutting speed 3000 rpm. Voltage: 3 x 380 V 50 Hz Control voltage: 220 V Performance: 11 15 a Machine number: 606 Wiring diagram number: 23.04.052

The WS 316 SR is the ideal sampler for eliminating any risk of crosscontamination, as the entire system can be rinsed after the taking of each sample. It is also well suited to the sampling of very dirty or greasy sample media, as warm water rinsing is also available if desired

Rod tube

HEIDELBERG Stahlfolder RFH 66/4 BCUH of 2007 16 pages combined. International - English & German fold A folding machine of 66 cm, config; -1St unit 4 x. Pockets, round pile feeder + 3 x. Knives KTL = 16 pages - int. English or German folds > > Option: VF-66 2006 - Mobile knife / total fold 32 pages < < Delivery St. Unit TSH 70 presser stacker Condition; VERY GOOD condition, immediately available, Can be lakes in our factory at Strasbourg FR

Drill grinding machine drill Grinding drillautomaticallys automatically in one clamping. maximum drill diameter 60mm (probably 80mm) Also suitable for drills with three or four cutting edges. Ready for immediate use. Simon SP50 SP80 Special price

Size max 355 x 250 mm min 115 x 100 mm Speed max 4200 c/h Number of stitches Standard 7 Dimension 1500 x 1400 mm ; working condition

Wave grille loom: working width: max. 3,000 mm wire rod: 2.0 - 7.0 mm mesh widths: 8.0 - 100 mm Kripper: wire staerke range: 1.5 - 7.0 mm feed speed: max. 28 mtr./min; ready for use

crimped mesh loom: working range: max. 3.000 mm wire diameter range: 2,0 - 7,0 mm mesh width: 8,0 - 100 mm crimping machine: wire diameter range: 1,5 - 7,0 mm wire feeding speed: max. 28 mtr./min; ready for operation

12 stueck, see pictures

Max sheet size 1300 x 1100 mm min. Sheet size 350 x 350 mm Precision +-1.5 mm Speed 6,000 sheets / hour Power 12 kW Length 12,5 m Weight 6.8 t

8 main spindles, Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading, Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo

Technical data: -Cutting capacity 90 ° round 420 mm square 420 x 420 mm -Band saw blade dimensions 6300 x 41 x 1,3 mm -Cutting speed infinitely adjustable 0 x 130 m / min -hydr. Lifting - lowering of the column-guided saw frame - cut pressure infinitely adjustable 0-10 m / min -Hydr. movable work piece vise -biggest opening of Vice 480 mm -maximum passage height under the blade 480 mm -Material height approx. 700 mm -Total power 400 V / 8 kW -Hydr. Bundle clamping device -Coolant system -MOT. Spaeneraumbuerste -MOT. Chip conveyor - MOT feed roller 2000 mm -Space requirement approx. B 2200 x H 2500 / 2800 X 3200 mm -Weight approx. 3200 kg

Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm

Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting

High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine

Sleeve label machine for can.

Rod lathes Thiel

Sell semiautomatic funnel Stuffer equipped with agitator. Voltage 230V. Funnel 45 liters with ClampanschluÃ? for product supply Filling volume of 15 ml 1000 ml. (depending on the filling Pistons) Option 1 - 15-250ml. Option 2 - 50 ml 1000ml. Filling quantities of 1 - 15 pieces the minute / dependent Visco and filling volume. The lifting table can option be purchased with as. You will find more machines and accessories below: ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35837&dealer=1& ;order=1& or ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35846&dealer=1& ;order=1& visit us also at: cbv-pack

8-spindle rotary machine Built in 1989; serie 25 Refurbished in 2012 • New electrics • New bearings • Guided tours • CNC cross slide in position 7 • Spindle stop setup • Material rod guide • Chip conveyor • Pick-up spindle position 8 • Calibration device • Various tool holders • Various curves

-Digital display Fagor. -Accessories available. Tip height 200 mm Top width 800 mm Turning diameter over slide/bed 240/425 mm Length of the bend of the Planscheibem with 4 JAWS 180 mm Spindle bore 51 mm Inner cone 60 metric Recording camlock D6 " Speed 45-2240 Rev/min The lead screw pitch 6 mm Tailstock spindle mount MT 4 Diameter of tailstock Quill 70 mm Quill: 200 mm stroke Feeds: Along 0.05 2.8 mm / Rev Plan 0.05 2.8 mm / Rev Rapid traverse: LW Thread pitches: Metric 0.5 14 mm English 2-56 U/1 " Module 0.125 3.5 Motor 380 Volt, 12.5 HP Machine dimensions: B x T x H 2400 x 1200 x 1800 mm Weight 2100 kg

Lathe Brand: KME All information without guarantee

Neri BLB 400 V2T self-adhesive labeller for applying labels to the top and underside of cartons with 2 label dispensers. Carton size range: min. 20 x 15 x 70 mm, max. 180 x 120 x 200 mm. Label roll diameter max 400 mm, label roll core 40 mm. Siemens SIMATIC S7-300 PLC controller with Siemens Touch Panel Electrics 400 V/ 50 Hz, max. draw 4 KW, compressed air 6 bar Infeed height 820 bis 950 mm Machine dimensions approx. 2500 x 2000 x 2250 mm (LxWxH), weight approx. 1000 Kg, Output up to 200 cartons per minute (2 machines available)

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 7.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8.00 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 2.0 HP Machine´s weight about: 730 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1400 mm Various accessories: Drilling attachment 12 U Pick-up attachment: 34 DA Electric control-box Controlled clutching device

Store number: 3418 BANDS�GEAUTOMAT Manufacturer: IMET, Type: X-TECH 410 Machinen NR.: 033476001, Built: 2003 Specifications: Size sawing capacity dia. 410 mm Total output 5.5 kW Hydraulic. CNC control. Saw male 6150 x 41 x 1.3 Length: 2000 mm, Høhe: 2200 mm, Width: 3500 mm, Weight: 3450 kg

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 20.00 mm Max. turning length: with flat cames: 80 mm with bell cames: 150 mm Spindle hole: 21.00 mm Max. treading diameter: 12 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 28 from: 485 rpm up to: 5450 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 1450 kg Overall dimensions machine: Length: 2200 mm Width: 1100 mm Height: 1700 mm Various accessories: Combined 3-spindle attachment: 12 CA Controlled clutching device

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13-Y Electric control-box

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 7.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8.00 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 2.0 HP Machine´s weight about: 730 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1400 mm Various accessories: Electric control-box 3 spindle front attachment Controlled clutching device Centering device lateral: 17 MA Rocker arm with 1/1000 mm

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 7.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8.00 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 750 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1400 mm Various accessories: Electric control-box 2-Spindle back-drilling att.: 32 AA on pick-up: 12 UB+perçeur transv. 12 UB

KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.

Graham labeler COUV 128-40 with tripod, Y.O.M. 2001

Pallet feeder 1st station 8 folding bags Window fold pocket Side pocket 2 Swords Shed delivery ASP 66 Noise protection hood

Bertolaso Athena 75/15 Vacuum filler Bertolaso Year: 1991 with 75 filling valves and 15head aluinium screw capper Running direction: left to right

M. No.: 20051619 Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...

Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide

Thread cutting gear Pick-up device partially revised

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer

Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle