automatic used for sale

: neu : ca. 4 Monate ab Auftragse : Türkei : 32600 € : 658.52 € : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 750x540 mm : rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm : 0.12 kW : 4 kW : 3000 mm : 1300 mm : 2150 mm : 2445 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame 3° inclined saw band user manual in GERMAN or ENGLISH (the vertical hydraulic clamping shown on the photos ...

Pocket folder GUK FA 36-4 /SAF 36; good condition; cleaned and tested; Folding rollers need to be replaced; Format 36x45cm; 4 folded pockets; smallest fold 26mm; automatic suction feeder SAF 36; Double sheet inspection DBK 36; Shed display. Pocket folding machine GUK FA 36-4 /SAF 36; good condition; cleaned and checked; folding rollers must be changed; size 36x45cm; four pockets; smalest fold 26mm; automatic vacuum feeder SAF 36; double paper control DBK 36; Stream Delivery Unit.

-Automatic lathe, single-spindle automatic lathe; -Workpiece diameter max 15 mm; -Turning length: 70 mm.

saw band size 3180x25x0.9 mm; machine equipped with Band Dynamometric Tension adjustment; 2x hydraulic/manual material clamp; equipped with freestanding galvanized steel height-adjustable drain roller conveyor size 3030x460x970 mm; coolant liquid pump; capacity around 240 mm; rectangle capacity 240x300 mm; fully automatic 0° to 45° / semi-automatic 0° to 60°; control panel; equipped with forklift fork slots; including various accessories on the table including 10x new saw blades; without table;

-Automatic lathe, single-spindle automatic lathe; -Workpiece diameter max 25 mm; -Turning length: 70 mm.

There are two automatic scales available (1) Vollenda VBA/VP, he machine is functional, mechanical bagging stations with large hopper (approx. 1m³ volume), is not calibrated (2) Vollenda VWE 9000, the machine is functional, with calibration, sensor retrofitted for automatic bag clamping and unclamping, tipping function of the bags possible.

For sale we offer a strapping machine Model TV02 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. The fully automatic strapping machine TV 02 convinces with maintenance-free direct drives and Simplest operation. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Conveyor belts with four belts Strap closure off-center SPECIFICATIONS Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm min. 160 mm Height: max. (without press) 650 mm (with press) 550 mm min. 10 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx.  ...

Metal band saw from MEP type Shark 452-CCS. Built in 2007. Required set-up/working surface of the saw is: L3000mmxW1500mmxH2100. In addition, there are two roller tables, length/protrusion on the left approx. 1800mm, on the right 3500mm. Electro-hydraulic, semi-automatic band saw for 60° cuts • Large, mounted turntable with indexing • Large cutting area 450 x 330 mm on beams and profiles • Mechanical reduction gear • Electronic display • Base with coolant tray and chip drawer • Electric coolant pump • Automatic hydraulic saw blade lift at the end of the cut. We are selling our Shark 452 CCS, the saw is still in operation and fully operational. It has always served us very well and reliably. Our business has changed a lot in recent years and we therefore want to buy a slightly smaller saw. The machine shows the usual signs of wear and damage to the paintwork. The saw wa ...

Fully automatic powder filling system, triple auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pnematics, HBM weighing sensor (Germany). 2 packaging modes: High speed or High Accuracy. Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% (high speed mode), +/-1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 40-130, heig ...

Fully automatic powder filling system, double auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pneumatics, HBM weighing sensor (Germany). 2 packaging modes: High Speed or High Accuracy | - Specifications: stainless steel (SS304) version | filling range: 10-5000g, accuracy: +/- 0.3-1% (high speed mode), +/- 1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 50-200, ...

Fully automatic powder filling system, single auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. - Specifications: stainless steel (SS304) version | filling range: 10-1500g | accuracy: +/- 0.3-1% | suitable for: metal cans, glass bottles, plastic jar, paper bags, etc. | container dimensions: diameter 40-130, height 80-220mm with different can feeding screws | max. speed of the machine in neutral: 60 fillings/min | power: 220V, 2.0kW | machine dimensions: L1850xW1366xH2100mm | 260kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new price ...

Fully automatic powder filling system, single auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. - Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% | suitable for: metal cans, glass bottles, plastic jar, paper bags, etc. | container dimensions: diameter 40-80, height 60-180mm with different can feeding screws | max. speed of the machine in neutral: 60 cycles/min | power: 220V, 1.6kW | machine dimensions: L1450xW1230xH1800mm | weight: 190kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new p ...

cutting diameter: 570 mm saw band length: 7250 x 41 mm cutting width: 1,3 mm capacity 90 degrees: square: 550 x 550 mm capacity 90 degrees: flat: 550 x 700 mm total power requirement: 4 kW weight of the machine ca.: 6050 kg required space: 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for o ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 44300 € : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 750 mm : 910x750 mm : rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm : 0.12 kW : 4 kW : 4020 mm : 1600 mm : 2450 mm : 3970 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

Year of construction: 1993 semi-automatic hot stamping press Embossing format max. 125 x 280 mm electr. Drive 1 Slide preference 1 heating plate automatic feed Unwinding device for round materials / cans Underframe Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Automatic Band Saw BOMAR Maxi diameter: Ø 250 mm Hydraulic clamping of the chuck Straight and angular cut Automatic descent Possibility to work manually or auto 2 rotation speeds of the blade Lubricant pump Voltage: 380 V Length: 2000 mm Depth: 1800 mm Total height: 1800 mm Weight: approx 1,5 T

Automatic steam trap, tank with automatic drain, 2 pieces SMC EAD44 diameter (filter container): Ø 50 / 58 mm ( inside / outside ) Hose connection for diameter: Ø 10 mm ( outside ) Operating pressure: max. 1.0 MPa ( 10.0 bar ) Operating temperature: max. 60 °C Material (filter container): Polycarbonate New ! Dimensions: 170 x 68 x 65 mm

Automatic steam trap, tank with automatic drain, 2 pieces SMC AD48 diameter (filter container): Ø 52 / 60 mm ( inside / outside ) Hose connection for diameter: Ø 10 mm ( outside ) Operating pressure: max. 1.0 MPa ( 10.0 bar ) Operating temperature: max. 60 °C Material (filter container): Polycarbonate New ! Dimensions: 165 x 68 x 65 mm

Automatic steam trap, tank with automatic drain, 2 pieces SMC AD37 diameter (filter container): Ø 38 / 44 mm ( inside / outside ) Hose connection for diameter: Ø 10 mm ( outside ) Operating pressure: max. 1.0 MPa ( 10.0 bar ) Operating temperature: max. 60 °C Material (filter container): Polycarbonate New ! Dimensions: 142 x 53 x 49 mm

Automatic steam trap, tank with automatic drain, 2 pieces SMC EAD43 diameter (filter container): Ø 36 / 42 mm ( inside / outside ) Hose connection for diameter: Ø 10 mm ( outside ) Operating pressure: max. 1.0 MPa ( 10.0 bar ) Operating temperature: max. 60 °C Material (filter container): Polycarbonate New ! Dimensions: 142 x 53 x 49 mm

Automatic steam trap, tank with automatic drain, 2 pieces SMC AD38-A diameter (filter container): Ø 38 / 41 mm ( inside / outside ) hose connection for diameter: Ø 10 mm ( outside ) Operating pressure: max. 1.0 MPa ( 10.0 bar ) Operating temperature: max. 60 °C Material (filter container): Polycarbonate New ! Dimensions: 144 x 53 x 49 mm

The SCC-1 semi-automatic crown corker is suitable for corking glass bottles with 26 or 29mm crown corks. The clamping unit can be used on crown caps of 26 or 29mm diameter. If both diameters are needed, an additional clamping unit is supplied. The crown cork closing head is made of hardened steel, and it is also resistant to wear over time. The rail guides the crown caps in the correct position. The specific shape of the rail is built specifically for the crown caps in 304 stainless steel. It contains a small amount of crown corks that can be inserted manually. The closing unit pulls the crown caps out of the rail and puts them into the closing cone. On request, a funnel can be fitted to insert a larger quantity of crown caps. In accordance with EC standards, the closing process starts with the simultaneous pressing of two buttons. After positioning the bottle on the holder, the closing  ...

Automatic traysealer, for preformed containers of last generation, very fast, efficient and with 2 sets of mold. Used equipment completely revised and reconditioned. From the manufacturer CFS, model STAR 2 HS. Built entirely in stainless steel. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 2 sealing molds, 1st for containers 1/2GN 2 trays per sealing last, Dimensions of the welding area, for the molding of 2 containers at the same time (1/2GN): 260 x 320 mm. Sealing area measures 700 x 300mm. 2nd for containers 1/4GN 5 trays per sealing last. Welding area dimensions, for molding 5 contain ...

Semi-automatic traysealer, for preformed containers. Practically new used equipment. From the manufacturer ULMA, model SMART 300. Specially designed for packaging in heat-sealing format to achieve a better presentation, as well as ease of storage and transport. It automatically performs heat sealing, perfect film trimming and automatic film collection. It has 2 sealing lasts in different formats. Lasts for sealing 2 containers at the same time. • External dimensions 1020 mm long x 1050 mm wide x 1540 mm high. • Power 6 kW; • Power supply 400 V, 50 Hz, 3W+N+PE • Measures of containers by molds: 1st Mold 225x180 mm x 2 containers. 2nd Mold 180x180 mm x 2 containers, plate Q. • Film width 390 mm; • Roller width 450 mm; • Aluminium rollers; • With seal-only function. • Sealing area 450x350 mm; • Maximum tray height 100 mm; • Pneumatic mold lifting system ...

dimensions of saw-band: 4400x34x1,1 mm : 305 mm : 305x335 mm capacity 90 degrees: round: 335 mm capacity 90 degrees: flat: 500x335 mm : 330 mm : 305x335 mm : 180 mm : 170x335 mm work height max.: 750 mm rest piece length man./autom.: 80/300 mm : 1000 / 9999 mm : 15-150 m/min Weight: 2020 kg Standard equipment: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m / min - Hydraulic material full lift voltage - Automatic procedure of the vices - Minimum speed and saw blade monitoring - Electric miter turning via servo motor - Visualized program input with CNC control - Material insertion via servo-controlled ball screw drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Professional strapping machine from a renowned German manufacturer, designed for high speed and trouble-free operation. -Strapping frame inside approximately: width 600 x height 500 mm. Height with press approx. 400 mm. -Up to approx. 40 straps per minute. -Adjusted bandwidth 12 mm. -Automatic belt ejection when strapping is released without packaged goods. -Wear-free force-controlled belt guide system. -Electronic heating temperature control. -Uncomplicated bobbin changing and threading system. -Integrated pneumatic press. -Potential-free contacts available for linking to upstream and downstream systems. -Wiring diagrams are available -The machine is height-adjustable or can be moved via castors. Control unit: -Selection of manual / automatic mode. -Adjustment options for multiple strapping and strapping position on the package. -Strip cutting in ...

Automatic Groove and Grip Hole Eyelet Machine Hang Type 115-20 incl. Conveyor Belt and Ceiling Magazine Built in 1988 OKU-Automatic eyelet sorter, Conveyor belt Length 2,500, width 500 mm, Folding unit HANG, Benefit Investors Machine is in good condition

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydr. Horizontal band saw machine, band saw machine, metal band saw machine -Manufacturer: Pehaka, horizontal band saw automatic band saw -Drive: 0.8 kW -Cutting data flat: 320 x.150 mm -Cutting data round: mm -Cutting data square: 150 mm -Saw band speed: continuously adjustable, 20 - 195 m/min -Saw band: approx. 3700 mm -Coolant device -Dimensions: 1800/940/H1310 mm -Weight: 528 kg

Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Automatic Packaging Machine, Seamer SIAT / BRÜNINGHAUS Type SM8.1 Carton Gluing Machine, Carton Gluer, Semi-Automatic Sealing Machine Fabr. No. 15905 Year of construction 1999 Carton length 160 mm -any Carton height 150-500 mm Carton width 130-520 mm Mains connection 400 volts, 50 Hz, 200 watts - Manual crank adjustment of the lateral conveyor belts for the carton width - Carton feed via conveyor belts on the right and left - manual crank height adjustment of the upper gluing station - Glues the bottom of the box and the top of the box with 2 separate parcel tape stations- 2 gluing units for the processing of self-adhesive tape, width 75 mm- Gluing stations for self-adhesive tape (also for large rolls 300 mm) Space requirement L x W x H 950 x 700 x 1200 mm Weight 120 kg good condition; used

Belshaw Mark VI Automatic donut fryer Serial: 22682 2018, 4 wide automatic fryer for donuts, 1000+ donuts per hour, adjustable speed, timer and temp controls, with infeed conveyor, 1Ph

Machine Speed : 2500 pots per hour (depending on container specification and product viscosity) Fill Range Main fill, pre-fill and post-fill filling systems 70 to 568cc each Dosing Range : Small dosing 0 to 100cc each Pot Diameter : Maximum 125mm Pot Height : Maximum 125mm Power Supply : 380-415V / 3 Phase / 50-60Hz + Earth + Neutral Air Supply : 6 Bar at 150L/min NovaPak D2500 is a flexible, compact, automatic rotary filling and sealing machine, fully enclosed using minimum floor space. It can cater for various size and shape of container and offers a machine mounted container dispenser unit and location system to accurately control container stacks. A detection system is integrated as standard to offer ‘no-container; no-operation’ facility The machine includes a filling system (manufactured from 316 grade stainless steel) complete with product tank. Interchangeabl ...

ADIGE TT640 automatic tube cutting machine Adige saw model TT 640. Straight cuts only, for steel or non-ferrous tubes with a diameter of 15 to 80 mm. Equipped with an automatic strap loader for bars up to 6m50. Unloading for lengths 2000mm max. In perfect working order. Delivery and installation possible

Code: 0010 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

Band saw fully automatic automatic band saw horizontal MEP SPA Shark 320 AX Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.

Code: 0200 Brand: PAMMINGER - AUSTRIA Model: T-AGGREGAT High-performance automatic vertical strapping machine for strapping pallets, panels, composite materials, various materials, etc - Year 2018 - CE Standard Max workable width 2100 mm Max workable length 5600 mm Max workable height 600 mm The upper arrangement of the strapping aggregate and therefore resulting flexibility in width and height of both the machine and the packing piece which has to be processed ensures variable operation of the machine 2 column machine frame made of bent and welded sheet metal Clearance adjustable support rollers ensure a smooth running of the support along the machine columns The movement of the lifting unit including the sealing unit and the strap guiding frame is utilized with an endless toothed belt and an electric gear motor with brake Vertical slide and aggregate support for the s ...

: gebraucht : 2022 : 6211 : Türkei : 17900 € : 1 : Schwenkrahmen : 5200x34x1,1 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 410 mm, quadrat 410 : rund 320 mm, quadrat 250 : rund 410 mm, quadrat 410 : rund 320 mm, quadrat 285 : 860 mm : 0.12 kW : 0.55 kW : 3 kW : 2800 mm : 1210 mm : 1870 mm : 1540 kg DEMO MACHINE - MINT CONDITION hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLI ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 45210 € : 917.76 € : Schwenkrahmen : 3120x27x0,9 mm : 20-100 m/min : 280 mm : 240 mm : 310x240 mm : rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm : 835 mm : 0.12 kW : 0.37 kW : 1.5 kW : 1.95 Nm : 1.95 Nm : 2800 mm : 2000 mm : 1820 mm : 1200 kg CNC control with 7", touchscreen for following functions: feeding length, pieces and rotation of the bow for mitre cutting automatic feed 1000 mm / stroke variable cutting pressure machine with speed variator coolante equipment motorizes chip brush chip conveyer automatic saw blade breakage detection hydraulic clamping vices material chute user manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 420 mm, 6300 mm, 1 mm

Fully hydraulic high-performance band saw in the heaviest design, with horizontal parallel movable saw blade, for cutting profiles, tubes and solid material in all Qualities, including material that is extremely difficult to machine (e.g. Titan, Inconel, Hastelloy) Guidance of the sawing unit via two vertical square columns with hardened and ground guide rails. Hydraulic band saw clamping and hydraulically pre-tensioned Carbide band saw guides. The material is clamped by two hydraulic clamping vices. The feed length can be adjusted by means of a counter with a resolution of 0.1 mm. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machine is easy to operate and is fully automatic. max. material diameter 420 mm max. feed single 6300 x 41 mm Multiple feed 9,999 mm smallest diameter to be sawn 10 mm Shortest remnant length in automatic ...

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

AUTOMATIC LAMINATOR FTP MODEL 720 -Year 2011 -Max paper size 720x520 mms. -Min paper size 400x300 mms. -Max speed 26 m/min -Power : 7,5 KW -Compressed air : 5 bar -Touch screen monitor for all the functions -Electric heated with regulations from a min. of 80 to a max of 120 degrees -Air pump, Air compressor -Automatic sheet separator -Available immediately, complete with all accessories

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 13 - 73 U/min total power requirement: 3,0 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m High-performance vertical circle saw, fully automatic hydropneumatic. · Miter left. 60° + right. 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Gear ratio, integrated into a stable cast housing Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts. Also included Quick lateral movement when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip clearin ...

Halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine MAF WS2-St500 Year 1989 - Serial-No. 24 08689 Mobile on mobile frame After sealing - automatic transport into tunnel -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Dreiseitenschneider - Halbautomatisch - Three-Knife-Trimmer - Semi-automatic Wohlenberg A43/30W Baujahr / Year 1959 - Serial-No. 4651 Semi-Automatic -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/400 Year 1983 - Serial-No. V 6.83.1891 Mobile on mobile frame After sealing - automatic transport into tunnel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Automatischer Banderolierautomat - Automatic Banding Machine HIMA BA 30/800 Baujahr / Year 10/2004 - Serial-No. 15005.225 Beschichtetes Kraftpapier bzw. Kunststoff-Folie Coated paper or plastic film Technical specifications: Leistung / Output: up to 23 Takte/min / cycles/min. Produktbreite / Width of banded product: 30 - 310mm Produkthoehe /Stack height: 3 - 200mm Bandbreite / band width 30mm Taktausloesung /Triggering of cycle: – von Hand/Starttaster / manual/start button – ueber Fussschalter / foot actuator – ueber Automatiktaster / automatic mode button Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 2TM Year 2010 - Serial-No. KN 096776 Mobile on mobile frame After sealing - automatic transport into tunnel Sealing frame max. 500 x 400mm Height adjustable working table Shrinking tunnel with conveyor Film carriage on rails Dimensions of tunnel arc 544 x 387 x H 190mm Overall dimensions 1900 x 900 x Ht 1300mm Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect In production - Can be test

Halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 Universal Year 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Used Schutte Se 16 Multispindle automatic lathe model Se 16 six spindles, year 1975 maximum diameter with counter-pliers 18 mm, with the automatic loader it becomes 22 mm. electrical panel redone The machine is already set up for the loader, but it also has the tube and the stand

Designed for winding of polymer and composite pipes with a diameter of 16 to 63 mm and automatic strapping of finished coils of polypropylene stripping tape. Year of production: 2005 Country of manufacture: Italy Condition: like new. Running about 300 hours. Then all extrusion production was stopped and never started again. The extrusion lines were sold separately. Coiling range of tubes: 16 - 63mm Packing: automatic polypropylene stretching tape. Synchronizing tensioning arm With pneumatic brake and tension sensor. Controls coil rotation speed and winding tension. Control panel with graphic display and digital keypad. Condition: fully operational. Can be demonstrated in dry cycle. Availability: immediate shipment