automatic used for sale

Incomplete Thimonnier M3200 which is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag vo ...

Used automatic edge banding machine FRAVOL, Italian made, model R9 of the RAPID series. It applies PVC, ABS, melamine, veneer and solid wood edging, in strips or from the roll. A compact and sturdy machine, suitable for both industry and small workshops. The machine heats up quickly and is ready for work in 8 - 10 minutes. The pressure units are adjusted automatically, with a pressure bar with a double row of wheels. The two motors of the end trimming unit are adjustable from 0 to 15 degrees and are powered by a 200 Hz frequency converter (inverter). Technical data: Panel thickness: 10 - 60 mm Minimum panel width: 60 mm Minimum panel length: 140 mm (PVC) Edge band width: 15 - 65 mm Edge band thickness: 0.4 - 15 mm Feed rate, adjustable: 6 - 16 m/min Glue pot capacity: 3 kg Voltage: 220/380 V, 50/60 Hz, three-phase Installed power: 7.5 kW Pneumatic pressure: 6 bar Weight: 1900 kg For t ...

Incomplete Thimonnier M3200 which is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag vo ...

Strapping machines MOSCA – fully automatic Location: 41564 Kaarst-Holzbüttgen For sale are high-quality fully automatic strapping machines from the German premium manufacturer MOSCA. The machines are ideal for professional use in logistics, shipping, production, printing and packaging. 1. MOSCA SoniXs TR-6 Pro (built in 2014) • Quantity: 1 piece • Dimensions: L 850 × W 1450 × H 1950 mm • Passage: 600 × 550 mm • Band width: 8 mm • Working/conveying height (FOK): 800 mm, adjustable • Voltage: 230 V • Equipment: Automatic strapping machine with hold-down device and touch screen Technical highlights (SoniXs technology): Patented ultrasonic welding system (SoniXs), low-emission and energy-saving. Standard 6-belt path for fast and tool-free maintenance. The Pro model has a modern HMI touch panel with intelligent control and is Industry 4.0 ready. ...

Strapping machines MOSCA – fully automatic Location: 86167 Augsburg For sale are high-quality fully automatic strapping machines from the German premium manufacturer MOSCA. The machines are ideal for professional use in logistics, shipping, production, printing and packaging. 2. MOSCA SoniXs TR-6 Pro – drivable (year of construction 2017) • Quantity: 1 piece • Dimensions: L 850 × W 1450 × H 1950 mm • Passage: 600 × 550 mm • Band width: 8 mm • Working/conveying height (FOK): 800 mm, adjustable • Voltage: 230 V • Special feature: mobile Technical highlights (SoniXs technology): Patented ultrasonic welding system (SoniXs), low-emission and energy-saving. Standard 6-belt path for fast and tool-free maintenance. The Pro model has a modern HMI touch panel with intelligent control and is Industry 4.0 capable. High process reliability and perfor ...

Strapping machines MOSCA – fully automatic Location: 41564 Kaarst-Holzbüttgen For sale are high-quality fully automatic strapping machines from the German premium manufacturer MOSCA. The machines are ideal for professional use in logistics, shipping, production, printing and packaging. 3. MOSCA RO-TR 500-4 (built in 2006) • Quantity: 2 pieces • Dimensions: L 850 × W 1450 × H 1950 mm • Passage: 500 × 500 mm • Band width: 8 mm • Working/conveying height (FOK): 800 mm, adjustable • Voltage: 230 V • Control: S/CPU 313C • Equipment: Automatic strapping machine with hold-down device and touch screen Proven and robust in-line strapping machine with heat welding. Suitable for single, double or multiple strapping. Typical output: up to approx. 35 packages/min (single strapping). Ideal for printing, shipping and production lines. If you are int ...

STAR SW 20 ist eine CNC-Langdrehautomat mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. Kapazitäten: 11 Achsen, 2 Spindeln, max. Bearbeitungsdurchmesser 20 mm, Gegenspindel bis 10.000 t/min. Technische Daten: Spindel 3,7 kW, angetriebene Werkzeuge 1,2 kW (8.000 t/min), Schlitten 7 und 5 Positionen, Gegenbearbeitung 8 Werkzeuge (6 angetrieben), Eilgang 35 m/min, Anschluss 50 Hz 3x380 V, Gewicht ~3400 kg, Maße L2600×B1150×H1765 mm. Zubehör: Stangenlader, Lampe, Kühleinheit 150 l, Ölnebelabsaugung ELBARON, Schnittstelle Stangenlader. Erreicht enge Toleranzen; Branchen: Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Controllo touch KASTO BASIC CONTROL Auction-ID: A7-51034-18

TSUGAMI HS207 CNC automatic lathe was built in 2011 in Japan by TSUGAMI CORPORATION. The machine is designed for the mass production of small parts with complex geometries, used in various industries. It enables precise turning, drilling and threading of bar material with a maximum diameter of 20 mm. Machining is performed in 9 numerically controlled axes using the main spindle and a sub-spindle. This configuration enables operations to be performed on both sides of the workpiece without the need to re-clamp it. Once machining on one side is complete, the workpiece is transferred to the second spindle, which continues the operation from the opposite side. As a result, successive operations can be performed in a single cycle, which speeds up production and ensures high dimensional repeatability of the finished parts. The TSUGAMI HS207 is operated using a FANUC Series 31i-MODEL A CNC ...

Semi-automatic band saw EISMO BOMAR Year of construction: 2016 Bevel cut 45° Max cutting capacity: Ø 260 mm Max vise opening: 300 mm width Motor: 1,5 KW Hydraulic vise Variable speed drive on the blade rotation Automatic descent Lubricant pump Microspraying system Supplied with some new blades Voltage: 380 V Length: 2000 mm Width: 1200 mm Total height: 1400 mm (in low position) Weight: approx 500 KG

SHIMADZU SIL-10A automatic injector for parts; Power supply: 220V; Dimensions (WxDxH): 26x35x42 cm; Weight: 20 kg; On/Off -> ok; Untested material; Internal reference: FA-777 Auction-ID: A1-50994-1075

Distiller with automatic titration Vapodest VAP 50 Carousel GERHARDT - for parts; ; Non-functional equipment that has already been dismantled (see photos); It will be delivered as you see in the photos; No key to open the door of the Carousel; ; Equipment only provided for backup; ; Internal reference: FA-2555; Auction-ID: A1-50994-1103

Automatic panel sizing beam saw with rear lifting table Max panelsizes when rear loading: 5600mm x 2240mm Max. cutting length x width: 5600 x 5600 mm. Max. stack weight for the lift: 10 ton max stack height 580 mm Saw blade outstand: 125mm Main cutting motor 13,5 kW Sawblade diameter 450 mm. Scoring saw motor 2,2 kW Feed speed of the saw carriage, forward 5 to 150 m/min, return 150 m/min Speed of the pusher 80 m/min Number of grippers: 9, centers 75/275/475/1075/1775/2475/3275/4075/4875 mm. 5 air flotation tables in the front 2810 x 650 mm Controlls: CAD-matic 4.0

Cutting capacity: 4300 mm x 4300 mm. Sawblade height: 125 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 1-150 m/min. Returnspeed 150 m/min. Programm fence speed: 90 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1075/1825/2625/3425 mm. Machine control: CADmatic 4 – Professional Hardware: Windows XP (US) TFT display Software showing cutting plans 2-D/3-D, Graphic malfunction diagnostics by video.

Automatic cross-cut saw with programmable pusher, left-to-right operation Pusher fitted with a fluorescent camera for detecting chalk markings and measuring length Maximum material input length: 6,850 mm Wood width: max. 375 mm Wood thickness: max. 125 mm Saw blade diameter: 450 mm. Saw motor: 5.5 kW Feeder speed: approx. 60 m/min Outfeed table: 3 m Tigertouch software 15 industrial touchscreen PC Tigerlink for downloading cutting lists Tigeroptimizer optimisation software Laser marking for trimming out defects Zebra label printer

Process: horizontal drilling - injecting glue - driving dowels 1 drilling and doweling unit, freely programmable Workpiece dimensions: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/ max: 10 / 60 mm Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical pushers Double diaphragm pump 1:1 Dowels: 8 mm x 30 mm, 8 mm x 35 mm Control: Powercontrol PC85T with Woodwop software

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas Dowels: 8 mm x 30 mm, 8 mm x 35 mm Controlls: Powercontrol PC85 with Woodwop software

Fully automatic sorting and buffer cell installed between a boring cell and a carcass press. The cell collects all parts for each kitchen, then stacks them on pallets for assembly. Technical data: Robot: Fanuc R-2000iC/100P with controller, track driven by a Siemens Sinamics S210 servo Sorting rack: approx. 15 m wide x 4.5 m high x 1.4 m deep, buffer capacity for 6 kitchens (on average 115 parts per kitchen) Panel sizes in the rack: length 350–2500 mm, width 50–1000 mm, thickness 18–25 mm Panel sizes on the output pallet (not in the rack): up to 3000 x 1300 mm, thickness up to 40 mm Max. panel weight: 42 kg Pallet size: 1200 x 800 mm Ideal for kitchen and furniture manufacturers who want to automate the step between CNC boring and carcass pressing: less handling, no searching for parts, and all parts arrive ready for assembly, order by order.

CITIZEN CINCOM L 12 VII is a CNC Drehautomat, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Ø 12 mm, Länge 135 mm, Spindeldurchlass 20 mm; X1 32, X2 30, Y1 40, Z1 135, Z2 30; 27 Pos., 8 angetriebene Werkzeuge. Daten: Hauptspindel bis 15'000 t/min, Werkzeuge 10'000/9'000 t/min (0,75 kW), Gegenspindel bis 10'000 t/min, C-Achse 0,001°, Eilgang 35 m/min, 3×400 V 50 Hz, 6,1 kVA, Gewicht 1700 kg, L1760×B820×H1610 mm. Zubehör: LNS EXPRESS 112 Lademagazin, Feuerlöschanlage KRAFT & BAUER. Erreicht enge Toleranzen; Branchen: Automotive, Uhrmacherei, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Serial Number: 2000 Auction-ID: A1-50244-10

Serial Number: 3161 Auction-ID: A1-50244-13

Serial Number: 1192 Auction-ID: A1-50244-12

The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the bo ...

TORNOS MS 7 (arrêtage contrôlé) ist ein Drehautomat mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. Kapazität: Werkstoffdurchlass 7 mm; mit Flachkurve 60 mm; grösster Gewindedurchmesser 8 M. Daten: 20 Spindelstufen 1.400–10.000 t/min; 3×380 V 50 Hz; Leistung 2 CV; 6 Drehstähle; Abmessungen 1200×700×1400 mm; Gewicht ~520 kg. Lader: Barboy. Erzielt enge Toleranzen; geeignet für Automotive, Uhren, Medizintechnik, Luftfahrt und Präzisionsmechanik. Technische Daten ohne Gewähr

TORNOS MS 7 (arrêtage contrôlé) ist ein Drehautomat, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Werkstoffdurchlass rund 7 mm; mit Flachkurve 60 mm; größter Gewindedurchmesser 8 M; 6 Drehstähle; Drehlänge nicht angegeben. Technische Daten: 20 Spindelgeschwindigkeiten von 1.400 bis 10.000 t/min; Anschluss 3x380 V 50 Hz; Gesamtleistungsbedarf 2 CV; Abmessungen L1200 x B700 x H1400 mm; Gewicht ca. 520 kg. Ausstattung: Lader Barboy. Erzielt enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

TORNOS MS 7 (arrêtage contrôlé) ist ein Drehautomat, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Werkstoffdurchlass rund 7 mm; mit Flachkurve 60 mm; grösster Gewindedurchmesser 8 M; Anzahl Drehstähle 6. Verfügt über 20 Spindelgeschwindigkeiten von 1.400 bis 10.000 t/min; Anschluss 50 Hz 3x 380 V; Gesamtleistungsbedarf 2 CV; Maschinengewicht ca. 520 kg; Abmessungen L 1200 × B 700 × H 1400 mm. Lader: Barboy. Erzielt enge Toleranzen; typisch für Automobil, Uhrenindustrie, Maschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Main spindle: Speed 4,000 rpm Power 18.5 kW Bar passage 65 mm Sub-spindle: Speed 4,000 rpm Power 11 kW Bar passage 65 mm Ejector: Hydraulic with flushing Travel in Z 520 mm Rapid traverse in Z 30 m/min Tool carrier I (X/Y/Z): Technology 10-station turret Tool holder VDI30 Tool drive 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z 140/70/450 mm Rapid traverse in X/Y/Z 15/6/30 m/min Tool carrier II (X/Z): 10-station turret Tool holder VDI30 Tool drive 4,000 rpm, 4 kW, 16 Nm Travel in X/Z 140/450 mm Rapid traverse in X/Z 15/30 m/min Equipment/accessories: CNC Control TX 8i Chip management Chip conveyor Coolant management Mahle coolant plant with paper belt filter Bar Feeder, FMB Turbo 8-80 - 3m Length Precast Removal Hydraulic Parts Gripper with Conveyor Belt Oil mist extraction

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min automatic material discharge, never used Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50798-248

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50799-140

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50801-28

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50798-6

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-51178-31

2018 CITIZEN BNA-42S2 CNC Swiss-Type Automatic Lathe Machine Specifications Manufacturer: Citizen Model: BNA-42S2 Year of Manufacture: 2018 Machine Type: CNC Swiss-Type Lathe Chuck Size: 5” Maximum Spindle Speed: 5,000 RPM Spindle Motor Power: 5.53 HP Maximum Bar Capacity, Main Spindle (SP1): 42 mm Maximum Bar Capacity, Sub Spindle (SP2): 34 mm Standard Machining Length: 100 mm Number of Spindles: 2 Draw Tube Diameter, Main Spindle (SP1): 43 mm Draw Tube Diameter, Sub Spindle (SP2): 30 mm Rapid Traverse Rate, X1 Axis: 20 m/min Rapid Traverse Rate, Z1 Axis: 20 m/min Rapid Traverse Rate, B Axis: 20 m/min Live Tool Motor Power: 2.8/1.0 kW Live Tool Torque: 16 Nm Equipment and Accessories Edge Patriot 551 Bar Feeder Chip Conveyor Parts Catcher Parts Conveyor Live Tooling Sub Spindle Y-Axis 5-Axis Machining Capability Medium-Pr ...

Polishing unit without spraying at the outlet and after forming of the edges. HOLZ-HER Primus 1436 SE PVC edge banding machine Range: Primus Model: 1436 SE PVC Type: automatic edge banding / banding machine Use: application and finishing of edges on wood panels Power supply: three-phase 400 V on European configurations listed Feed speed: approx. 11 m/min Maximum panel thickness: approx. 50 mm Minimum workpiece width: approx. 60 mm Edge thickness: depending on configuration, up to approx. 8–13 mm in strips and 2–3 mm in rolls Pneumatic pressure: approx. 6 bar Indicative dimensions: L 4.5–4.7 × W 1.02–1.40 × H 1.63–1.65 m Indicative weight: approx. 1,230–1,300 kg Auction-ID: A3-46142-35224

Consisting of: multi-layer storage rack, 8x loading/unloading column, 2x 2-door control cabinet with digital display, 1x built-in control cabinet with Siemens Simatic HMI control panel, output roller conveyor with dimensions approximately 4000x1000 mm and safety fence Auction-ID: A1-47368-3500

Toyota Land Cruiser 3.0 D-4D 4x4 automatic – 2003 – 567,790 km – 3,500 kg towing weight Specifications: Brand: Toyota Model: Land Cruiser Year of construction / first admission: 2003 Odometer reading: 567,790 km Transmission: automatic Drive: 4x4 Tare weight: 2.010 kg Maximum towing weight: 3,500 kg braked Features: 5-door off-road vehicle Automatic transmission All-wheel drive Roof rails Running boards Tinted rear windows Alloy wheels, black All-terrain tires Particularities: Vehicle drives, runs and shifts well. MOT valid until 02-2027. PLEASE NOTE: this vehicle has a license plate registration. NL registration: 48-BJ-VN. Upon collection, the vehicle must be registered with a third party on site or exported. There are additional costs associated with this. Auction-ID: A1-47423-2225

Features and Benefits: Compatible with Euro pallets in the 120 x 80 cm format. Automatic destacking of empty pallets. Suitable for professional and industrial use. Saves time and reduces repetitive handling. Auction-ID: A1-51273-4

Key data: 320 mm

2 pieces - Behringer HBE 321 A Dynamic new machines for immediate delivery from stock. Attention, you get up to 15% subsidy if you exchange an old sawing machine for a new one! Equipment: Auto-Feed Control AFC Pro (Pos. 33) Active pruning monitoring (item 22) BEHRINGER Screw Chip Conveyor (Item 105) Automatic member start detection (item 535) Lighting (item 941)

Key data: 410 mm

BEHRINGER HBE 411 A DYNAMIC, NEW MACHINE! - at a top price, year of construction 2025/2026 factory warranty! manual positioning 18 Cutting Monitoring 22 Saw drive 5.2kW 50-2 Chip Conveyor 100 5 Micro 250 Package clamping device 440 Member Start Detection 535 Shut-off cylinder 550 Clamping pressure regulation 832 Line Laser 940 Lobr Sko Adpums Rrfsah Lighting 941 Cutting channel extension Behringer New Machines: Come-Cook-Buy immediately available from stock Warranty from the date of purchase Do you have an outage ? Replacement in the shortest possible time On request with delivery and assembly Immediately available from stock

Sakura Tissue-Tek SCA 4765 Automatic Lamella Gluer Manufacturer: Sakura Model: Tissue-Tek 4765 Film System (Xylene) Approx. 1500 slides per film roll Dimensions: W 71.9 × D 27.4 × H 56.1 cm Condition: Good condition, functionally tested, as shown in the photos Auction-ID: A1-51275-103

With motorized system and reel unwinder. Equipped with roller conveyor, transparent protective guard and pneumatic system. Mobile metal structure on wheels. Auction-ID: A1-51273-8

With vertical mast and turntable for palletizing. Electronic control panel with cycle programs P01 to P08, up/down and emergency stop settings. Used industrial equipment, aesthetic condition with signs of wear; operation to be checked. Auction-ID: A1-51273-46

cutting diameter: 260 mm saw band length: 4640 mm cutting width: 260 mm control: Behringer BT41 capacity 90 degrees: flat: 300 x 260 mm cutting range min.: Ø10 / 10x8 mm min. cut-off length: 10 mm cutting speed steppless: 20 - 140 m/min sawing motor: 4,00 kW dimensions of saw-band: 4640 x 34 x 1,10 mm total power requirement: 8,50 kW weight of the machine ca.: 2,20 t dimensions of the machine ca.: 2,60 x 2,00 x H2,20 m With BEHRINGER BT41-Terminal and a built-in 60-liter coolant reservoir. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatische Taschenfalzmaschine MBO T800.1-78/6-4 AUT mit Palettenanleger, ideal, um aus der Druckmaschine direkt in die Falzmaschine reinzufahren. Automatic Buckle Folder MBO T800.1-78/6-4 AUT with a pallet feeder it is perfect to move directly from the printing machine into the pallet feeder.  Automatische Taschenfalzmaschine / Automatic Buckle Folder MBO T800.1-78/6-4 AUT Baujahr / Year 2005 - Serial-No. 1124239 Palettenanleger / Pallet Feeder Falztyp  6 Taschen - 4 Taschen / Folding Type 6 Buckles - 4 Buckles Automatische Falztaschen / automatic buckles Navigator Control Stehendbogenauslage / Vertical stacker delivery SBAP 46 ME SN. 1224254 Inklusive Kompressor / Include Compressor 1 Jahr alte SoftPU-Walzen / 1 year old Soft-PU Rollers.

Automatische Fadenheftmaschine mit HEADOP Anleger. Automatic Sewing machine with Feeder HEADOP. Automatische Fadenheftmaschine - Automatic Sewing machine MECCANOTECNICA ASTER ASTRONIC 150 Baujahr / Year 1990 - Serial-No. 20227 Format / Size max. 320 x 460mm Geschwindigkeit / Speed 150 Cycles/minute Computer Programmer on Swinging Arm Opening system 4+4 Anleger / Feeder HEADOP with magazine 

Bosch / Skinetta complete ampoule line Used Bosch/Skinetta line for processing open glass hopper and spit ampoules. The line includes machines for washing, sterilizing and depyrogenating, filling, closing, labeling, cartoning and tightening. The maximum line output is up to 18,000 ampoules per hour, depending on the ampoule size. Format parts for 1 ml ampoules are included. The plant was completely dismantled in January 2026 and is unpacked at the operator in China, near Hong Kong. Plant data Manufacturer: Bosch / Skinetta Year of manufacture according to available information: 2009 Location: China, near Hong Kong Delivery condition: disassembled and unpacked Components of the line Bosch RRU 3063: Ampoule washing machine Bosch HQL 2220: Sterilization and depyrogenation tunnel Bosch ALF 4060: Ampoule filling and sealing machine Bosch ERS 2010 (500): Ampoule label ...

EXTEND EXS-303 semi-automatic strapping machine, year 2019. For efficient strapping of cartons, parcels and similar packaged goods. The strap is guided manually; tensioning, sealing and cutting are automatic. Supply 110 V / 220–240 V, 1 phase, 0.2 kW, 0.9 A, 50/60 Hz, short-circuit rating 80 A, weight 59 kg, CE compliant. Simple operation and sturdy construction. Three units in stock, immediately available.

SPRINGER MMVB38.10-1200 automatic stick layer, year 2006. Seven magazines including four double magazines, plus two completely new spare magazines. Mature, low-maintenance industrial design that can be integrated into existing third-party lines. Manually filled adjustable stick magazines permit different stick patterns on timber stacks. Overhauled and serviced in 2025, in stock and immediately available.

ROBOPAC Ecoplat TP FRD semi-automatic pallet stretch wrapper, year 2011. Turntable with pallet-truck access, mechanical FRD film brake and adjustable wrapping parameters. 230 V, 50/60 Hz, single phase, 4.0 A, 0.9 kW, weight 530 kg. Solid low-maintenance steel construction, low energy consumption and CE compliant. Used, fully functional with normal signs of use. Overhauled and serviced in 2024. Inspection and test by appointment.

Control Fanuc 16-TC Max. turning diameter 20 mm Spindle speed 10,000 min-1 8-fold revolver with antr. Wkz. Linear slides (3 operated stations) Pick-up spindle (indexing 15°) C-axis main spindle Chip conveyor Extinguishing system Bar loading magazine FMB Turbo 3-26/3200